Search results for: 'Thi'

YY-2222 CONVEYOR + AGGLOMERATOR + SCREW LOADER TECHNICAL PARAMETERS: 1. BELT CONVEYOR MOTOR POWER: 2.2KW WIDTH OF BELT: 800mm MATERIAL OF BELT: PVC SPEED CONTROL BY: FREQUENCY INVERTER MOUNTED ON CASTERS, EASY TO MOVE: YES 2. AGGLOMERATOR TANK VOLUME (LITER): 800 WORKING VOLUME (LITER): 600 CAPACITY(KG/H): 450 TO 600 MOTOR POWER (KW): 132 ROTATING BLADES SPEED (R/MIN): 750 ROTATING BLADE QUANTITY (PCS): 4 FIXED BLADE QUANTITY (PCS): 8 BEARING BRAND: SKF MATERIAL OF BLADE: SKD11 FROM JAPAN MATERIAL OF INNER PART OF POT: STAINLESS STEEL DISCHARGING MODEL: PNEUMATIC WATER SPRAYING WAY: AUTOMATIC MACHINE DIMENSION L×W×H (mm): 2170×1510×2145 MACHINE WEIGHT (KG): 2800 3. SCREW LOADER MAIN MOTOR: 1.5KW SECOND MOTOR: 0.55KW SCREW DIAMETER: 133mm VOLUME OF HOPPER: 100KG MATERIAL OF HOPPER: STAINLESS STEEL 4. ELECTRICAL CABINET ELECTRICAL COMPONENT BRAND: SIEMENS AND DELIXI TEMPERATURE CONTROLLER: OMRON FROM JAPAN ELECTRICITY: 220, 60Hz, 3PHASE (CAN CUSTOMIZED) QUANTITY: 1 SET Learn More

TT-1594 DISTILLATION SYSTEMS & COLUMNS, CAPACITY 950mm TO 1000mm DIAMETER ITEM 001 PACKED DISTILLATION COLUMN SYSTEM ITEM 002 PACKED DISTILLATION COLUMN SYSTEM Learn More

TT-1588 HUNT & MOSCROP KUSTERS CALENDERS, TABLE WIDTH 2000mm DISMANTLED AND STORED GOOD CONDITION NO SPARE ROLLS QUANTITY: 2 Learn More

YY-2212 PERFORATING LINE, USEFUL WORKING WIDTH 1800mm GENERAL TECHNICAL FEATURES: USEFUL WORKING WIDTH: 1800mm; MAXIMUM DIAMETER OF THE ROLL TO BE UNWOUND: mm. 1550 (FOAM) / 1550 (FABRIC); MAXIMUM ROLL WEIGHT: 200KG; ADJUSTABLE MECHANICAL SPEED: 400 STROKES PER MINUTE; APPROXIMATE PRODUCTION SPEED (DEPENDING ON THE TYPE OF MATERIAL AND DRILLING): M/MIN 3/6; POWER DISCHARGED ON CM: TON 120000; THREE-PHASE PRIMARY VOLTAGE + EARTH: V/Hz 380/400+E/50 Hz; INSTALLED POWER OF THE MOTORS: 26KW; AC MOTORS, ELECTRIC DRIVES, ELECTRIC CABLES AND WIRING, ARE ACCORDING TO CEI STANDARDS; EPOXY PAINTING; THE MACHINES ARE AUTOMATICALLY SYNCHRONIZED BY MEANS OF ELECTRONIC DRIVES "INVERTER" A.C. MOTORS, PNEUMATIC DANCER ROLLERS (COMPENSATORS) AND LOAD CELLS. QUANTITY: 1 Learn More

YY-2208 HUMAN CREMATION MACHINE, LIGHT DIESEL FUEL, GAS, NATURAL GAS, LIQUEFIED GAS DETAILS: 1. INCORPORATES EFFICIENT HEAT EXCHANGER AND SPECIAL AIR PATH STRUCTURE, MAKE FULL USE OF WASTE HEAT COMBUSTION FUEL GAS, IMPROVING HEAT UTILIZATION RATE, GOOD ENVIRONMENTAL PROTECTION INDEX, SAVES FUEL AND SHORTENS CREMATION TIME. 2. NEW REFRACTORY MATERIALS (EXCLUSIVE FORMULA) THAT ARE RESISTANT TO HIGH TEMPERATURE WITH LOW SPECIFIC HEAT. GREATLY EXTEND THE SERVICE LIFE. 3. SPECIAL CASTING MATERIAL, HIGH TEMPERATURE RESISTANCE, LONG SERVICE LIFE; SHORTENS THE COOLING CYCLE. THE BRICK STRUCTURE ON BOTH SIDES OF THE ASH PICKING FURNACE DOOR WILL NOT HAVE CRACKS CAUSED BY DESIGN OR QUALITY PROBLEMS GUARANTEED FOR ONE YEAR. REFRACTORY MATERIALS, THE FURNACE CONTACT ARE WITH FLAME HAS PHOSPHORIC ACID A CHARACTERISTIC COMBINATION BRICK WHICH CAN RESIST RAPID COOLING AND RAPID HEAT, AND THE ARCHED ROOF INCORPORATES HIGH ALUMINUM SINTERED MOLDING BRICK. THE FURNACE BODY IS SURROUNDED BY ALUMINUM SILICATE WOOL WITH GOOD HEAT INSULATION AND HEAT PRESERVATION PERFORMANCE. THE THICKNESS IS 180mm. 4. ALL OPERATING SYSTEMS OF THE EQUIPMENT HAVE THREE SETS OF OPERATION FUNCTIONS, NAMELY AUTOMATIC, SEMI-AUTOMATIC AND MANUAL, WHICH CAN BE SWITCH BETWEEN THEM WITHOUT INTERFERENCE. AUTOMATIC CONTROL, TELECOMMUNICATION OPERATION AND ANIMATION DISPLAY. KEEPING THE OPERATOR AWAY FROM THE CREMATION SITE AND PROTECTING THE OPERATOR. AT THE SAME TIME EQUIPPED WITH A STANDBY OPERATING SYSTEM. LOW NOISE MOTOR EQUIPMENT, THERMOCOUPLE RESISTANCE TO HIGH TEMPERATURE. ALL ELECTRICAL CABINETS OF THE EQUIPMENT ARE EXTERNAL. 5. THE OIL SUPPLY SYSTEM INCORPORATES AUTOMATIC CONTROL AND MANUAL CONTROL, AND INCORPORATES OIL PROTECTION TECHNOLOGY, WHICH CAN EFFECTIVELY PREVENT FUEL OIL FROM RUNNING, BUBBLING, LEAKING AND CAUSING FURNACE EXPLOSION ACCIDENTS INCLUDING ANTI-LEAKAGE TECHNOLOGY TO BETTER PROTECT THE PERSONAL SAFETY OF OPERATORS. 6. THE BLOWER, THE INDUCED DRAFT FAN, THE FURNACE DOOR MOTOR, THE BODY CART MOTOR, THE PREPARATORY DOOR MOTOR AND THE FLUE GATE MOTOR ARE ALL INSTALLED WITH AN INTEGRATED DEVICE FOR OVER-CURRENT AND SHORT-CIRCUIT PROTECTION. 7. SPECIAL DIESEL METERING DEVICE, ACCURATE METERING. QUANTITY: 1 Learn More

TT-1478 COMPLETE NEEDLE PUNCHING NONWOVEN LINE, YEAR 1988 QUANTITY: 1 Learn More

TT-1446 SSI PRIMAX 4400 SHREDDER - NEW, 20 TO 80 TONS PER HOUR, YEAR 2011 1045 HOURS OF USE BI-DIRECTIONAL SHREDDING (FORWARD AND REVERSE) INCREASERS THROUGHPUT ELECTRIC MOTOR SWITCHGEAR WITH DISCONNECTS AND CONTROLS MOUNTED IN WEATHER RESISTNT ENCLOSURES ONE SPARE SHAFT WITH CUTTER QUANTITY: 1 Learn More

V-2012 CLAMP, PUSH-ROD MACHINE. MATTRESS COVERING (FILLING) MACHINE FOR FOAM OR THERMOBONDED PLANKS QUANTITY: 1 Learn More

TT-1370 AUTOMATIC HIGH SPEED SLITTING REWINDING MACHINE, WIDTH 1900mm, NEW SUITABLE FOR ROLLS OF PLASTIC FILMS, LAMINATED FILMS, PAPER, ETC. SPEED: 0-400M/MIN SLITTING WIDTH: 30 TO 1900mm UNWINDING DIAMETER MAXIMUM ø1400mm WINDING DIAMETER: ø610mm MACHINE WEIGHT: 5000KG TOTAL MOTOR POWER: 31KW DIMENSIONS: W3500 X L3500 X H1900 (mm) PAPER CORE 3" (DIAMETER φ76mm DIAMETER φ92mm) OR 3.6” CORE ACCURACY: ≤ 0.30mm TENSION SETTING RANGE: 2 ~ 30KG WINDING MOTOR POWER: 11KW X 2 TRACTION MOTOR: 11KW MACHINE COLOR: STANDARD WHITE (OR AS REQUIRED) QUANTITY: 1 SET Learn More

TT-1317 FLEXO PRINTER W&H MODEL ASTRAFLEX, WIDTH 1250mm, YEAR 2001 MAX MECHANICAL SPEED 460 MT/MIN MAX UNWINDER DIAMETER 1000mm MAX REWINDER DIAMETER 1000mm CORONA TREATMENT WEB GUIDE QUANTITY: 1 Learn More