TT-1594 DISTILLATION SYSTEMS & COLUMNS, CAPACITY 950mm TO 1000mm DIAMETER

REFERENCE NUMBER: TT-1594 DISTILLATION SYSTEMS & COLUMNS, CAPACITY 950mm TO 1000mm DIAMETER ITEM 001 PACKED DISTILLATION COLUMN SYSTEM CAPACITY: 39 DIAMETER INCHES / 1000mm DIAMETER 1000mm DIAMETER X 26100mm STRAIGHT SIDE CARBON STEEL PACKED DISTILLATION COLUMN SYSTEM COLUMN MANUFACTURED BY COLIN RYDER LTD DESIGN PRESSURE 6 BAR @ 160 DEG C, 21,000 LITER VOLUME WELD DISHED BOTTOM, BOLT DISHED TOP, (3) PACKED SECTIONS 1 X 4000mm HIGH AND 2 X 6000mm HIGH 321 STAINLESS STEEL GLITSCH CASCADE MINI RINGS MOUNTED ON A 2000mm HIGH CARBON STEEL SKIRT THE TOP OF THE COLUMN HAS AN INTERNAL OVERHEAD CONDENSER WHICH IS MOUNTED IN THE TOP HEAD THIS IS 92.6 SQUARE METER 321 STAINLESS STEEL ‘U’ TUBE CARBON STEEL SHELL AND HEAD HEAT EXCHANGER (OVERHEAD CONDENSER) MANUFACTURED BY GRAHAM MANUFACTURING LTD DESIGN PRESSURE TUBE SIDE 6.9 BAR @ 150 DEG C SHELL 6 BAR + FULL VACUUM @ 150 DEG C, (208) 19.05mm DIAMETER X 14 SWG X 3710mm LEG LENGTH 321 STAINLESS STEEL ‘U’ TUBES, 4-PASS TUBE SIDE 635mm DIAMETER CARBON STEEL SHELL (1) CARBON STEEL BONNET HEAD SYSTEM ALSO HAS (1) 22.9 SQUARE METER 321 STAINLESS STEEL ‘U’ TUBE CARBON STEEL SHELL AND HEAD HEAT EXCHANGER (BOTTOMS COOLER) MANUFACTURED BY JOHNSON-HUNT LTD DESIGN PRESSURE TUBE SIDE 6.9 BARG @ 150 DEG C SHELL 3.45 BARG @ 150 DEG C (60) ¾” DIAMETER X 16 SWG X 3100mm LEG LENGTH 321 STAINLESS STEEL ‘U’ TUBES 2-PASS TUBE SIDE 406mm DIAMETER CARBON STEEL SHELL 4028mm OVERALL LENGTH (1) CARBON STEEL BONNET HEAD MOUNTED ON SADDLES PROCESS DESCRIPTION: FEED TO THE COLUMN ENTERS TWO DIFFERENT 51mm (2 INCHES) DIAMETER NOZZLES THE FEED IN THE PREVIOUS SERVICE WAS 5500mm /HOUR OF MIXED AMINES WITH METHANOL AN INTERNAL CONDENSER (321 STAINLESS STEEL) IS USED IN THE TOP OF THIS COLUMN TO CONDENSE THE METHANOL IN THE OVERHEAD STREAM THE CONDENSED METHANOL IS COLLECTED IN A CATCH PAN SOME IS USED FOR THE COLUMN REFLUX AND THE REMAINDER IS SENT TO STORAGE IN THE PREVIOUS SERVICE, 1400mm/HOUR OF METHANOL WAS RECOVERED LIVE-STEAM IS INJECTED INTO THE BOTTOM OF THE COLUMN TO PROVIDE THE SEPARATION MOMENTUM IN THE PREVIOUS SERVICE, THE LIVE STEAM INJECTION WAS 2500mm /HOUR OF 2.8 BAR (40-PSIG) STEAM AND THE BOTTOMS FLOW WAS 6.5 MT/HR OF MIXED AMINES AND WATER. ITEM 002 PACKED DISTILLATION COLUMN SYSTEM CAPACITY: 37 DIAMETER INCHES / 950mm DIAMETER 950mm DIAMETER X 27873mm TOTAL HEIGHT 321/304 STAINLESS STEEL PACKED DISTILLATION COLUMN SYSTEM COLUMN MANUFACTURED BY J.K INNES & CO LTD DESIGN PRESSURE 10 BAR + FULL VACUUM @ 183/200/317 DEG C OPERATING PRESSURE 10 BAR + STATIC HEAD @ 183 DEG C 25525mm STRAIGHT SIDE 5-PACKED SECTIONS CONTAINING 50mm X 50mm 304 STAINLESS STEEL PALL RINGS 4 X SECTIONS 4200mm HIGH 1 X SECTION 2500mm HIGH 304 STAINLESS STEEL TYPE HYDRONYL 850 DISTRIBUTOR PLATES AND RISER CAPS 304 STAINLESS STEEL TYPE HYDRONYL 818 BED SUPPORTS WELD DISHED BOTTOM, BOLT BONNET TOP, MOUNTED ON LUGS THE TOP OF THE COLUMN HAS AN INTERNAL OVERHEAD CONDENSER WHICH IS MOUNTED IN THE TOP HEAD THIS IS 20 SQUARE METER 321 STAINLESS STEEL ‘U’ TUBE CARBON STEEL HEAD VERTICAL CONDENSER MANUFACTURED BY J.K. INNES & COMPANY LTD DESIGN PRESSURE TUBE SIDE 7 BAR + FULL VACUUM @ 183 DEG C SHELL SIDE 10 BAR + FULL VACUUM @ 317 DEG C (120) 19mm DIAMETER X 16 SWG X 1400mm STRAIGHT LEG LENGTH 321 STAINLESS STEEL ‘U’ TUBES 25mm SQUARE PITCH 4-PASS TUBESIDE (1) CARBON STEEL BONNET HEAD COLUMNS ALSO INCLUDES (1) 29 SQUARE METER 321 STAINLESS STEEL TUBE HEAD CARBON STEEL SHELL VERTICAL HEAT EXCHANGER (REBOILER) MANUFACTURED BY GRAHAM HART LTD (JOHNSON HUNT) TYPE BEM, DESIGN PRESSURE 10.3 BARG + FULL VACUUM @ 183/317 DEG C SHELL SIDE 9.8 BARG + FULL VACUUM @ 317 DEG C 675KW HEAT LOAD, (202) 19.05mm DIAMETER X 1.63mm THICK X 2400mm LONG 321 STAINLESS STEEL TUBES 25mm TRIANGULAR PITCH, SINGLE PASS 457mm OUTSIDE DIAMETER CARBON STEEL SHELL EXPANSION BELLOWS, (2) 321 STAINLESS STEEL BONNET HEADS MOUNTED ON LUGS, (2) 1.75 LITER/SECOND @ 14000mm HEAD CARBON STEEL VERTICAL INLINE CENTRIFUGAL FEED PUMPS MANUFACTURED BY LEE HOWL, TYPE RIOF INLINE, DISCHARGE PRESSURE 1.97 BAR INLET PRESSURE 0.82 BAR, DRIVEN BY 2.2 KW, 3/50/415 VOLT, MOTOR