Search results for: 'pre n'

REFERENCE NUMBER: K-3351 CHICKEN SLAUGHTERING LINE – 1000 TO 1500 BIRDS PER HOUR QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: G-5886 CHICKEN SLAUGHTER LINE 6000 PER HOUR QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: M-4868 (1111275NKG10RX) L PUB BREWERY 20HL SPECIFICATION: 1. MALT HANDLING - CYLINDER-CONIC MALT SILO WITH 25M³ CONTENT, MADE IN FIBRE GLASS / PLASTIC, STANDING OUTDOOR ON STEEL CONSTRUCTION - MALT CONVEYORS / SPIRAL CONVEYOR INTO 1ST FLOOR - 2-ROLLER MALT MILL - GRIST CASE - FALL PIPE IN MASH COPPER (FOR DUST FREE MASHING-IN) - GIBBET-LIFT FOR BAGGED SPECIAL MALTS 2. BREWHOUSE TOWER BREWHOUSE FOR 20 HL / BREW, COMPLETE IN STAINLESS STEEL, BUILT 1994, STEAM HEATED, ISOLATED AND COVERED WITH STAINLESS STEEL SHEET, 2 CRANE EYELET, 2 STAINLESS STEEL PLATFORM, WITH: - MASH- / WORT COPPER WITH BOTTOM HEATING ZONE AND INTERIOR COOKER, SIDEWAYS AGITATOR, MANWAY ENTRANCE HATCH, LIGHTNING, STEAM REGULATION VALVE - LAUTER TUN, WITH STAINLESS STEEL RAKING MACHINE WITH SEW-DRIVE FROM TOP, WITH SPENT GRAINS SLIDER, STAINLESS STEEL FALSE BOTTOM, SPENT GRAINS HATCH, VERTICAL SIGHT GLASS, LIGHTNING, SPRAY HEAD, DOME LID WITH BUILT IN CONTROL CABINET - SPINDLE STATION WITH WASHING TABLE IN STAINLESS STEEL, ABOUT 1,5M WALL ASSEMBLED - HOT WATER TANK, WITH 30 HL, IN STAINLESS STEEL, ISOLATED AND COVERED WITH STAINLESS STEEL SHEET, HEATABLE, WITH MANWAY IN THE WALL, LEVEL DISPLAY - PRESSURE RAISING PUMP - WORT COOLING, 1-STAGE PLATE APPARATUS - WORT AERATION IN STAINLESS STEEL 3. FERMENTING- AND STORAGE TANKS - 5 CCTS, WITH 40 HL NET / 46 HL GROSS CONTENT, ALL TANKS 3 BAR, BUILT 1994, STANDING ON FEET, PI-ISOLATED FULLY WELDED WITH STAINLESS STEEL JACKET, WITH JACKET COOLING FROM CONE BELOW TO ½ WALL 60 LT COOLING JACKET 3 BAR, WITH MANWAY IN THE WALL, 2 OUTLETS WITH BUTTERFLY VALVES, TEMPERATURE SENSOR PT100, SPRAY HEAD, PULLED DOWN CLEANING PIPE WITH BUTTERFLY VALVE, BUNGING ARMATURE, OVER PRESSURE VALVE, SAMPLER, 2 CRANE EYELETS, 2 OF THE TANKS WITH LEVEL DISPLAY - DIGITAL TEMPERATURE CONTROL FOR 5 TANKS IN STAINLESS STEEL CONTROL CABINET - CIRCULATING PUMP IN STAINLESS STEEL, MOBILE, WITH SWITCH - MANY GOOD BEER HOSES - 6 X 10 HL BEER DISPENSING TANKS, MAKE DUO TANK, BUILT 2002, 3,0 / 4,3 BAR, COOL ABLE, ISOLATED WITH STAINLESS STEEL-JACKET FULLY WELDED, FOR INLINE-OPERATION, LYING IN RACK, SCREWED STAINLESS STEEL RACK, WITH PRESSURE ARMATURE, OUTLET ARMATURE WITH REDUCTION TO BARE CONNECTION, MANWAY WITH BIG SIGHT GLASS IN MANWAY LED - PANEL FOR 3 TYPES OF BEER 4. FILLING COMBINED BOTTLE-/KEGGING PLANT, WITH 1 CLEANING TUB, HEATED AND 1 REBUILT KEG: - BOTTLE CLEANING MACHINE FOR CLEANING OF 8 BOTTLES INSIDE AND OUTSIDE, FOR UP TO 2LT BOTTLES - BOTTLE FILLING STATION WITH HUB CYLINDER FROM BELOW, WITH SPLINTER PROTECTION - COMBINED KEG-CLEANING- AND FILLING STATION - BUILT IN CONTROL CABINET WITH SIEMENS S5 CONTROL AND OPERATING CONSOLE OP 7 5. OTHER EQUIPMENT - STEAM BOILER FOR ABOUT F280 KG/H, WITH GAS BURNER, FULLY SERVICED ON 4TH AUGUST 2014, BUILT IN 1994 - CONDENSATE TUB IN STAINLESS STEEL AT WALL AND SECOND SMALL S/S-TUB - WATER TREATMENT - STEAM REGULATION AND CONDENSATE VALVES IN CYCLE - STAINLESS STEEL CHIMNEY PLANT ABOUT 8-10M - AIR COMPRESSOR WITH WIND KETTLE, BUILT 1994 - COOLING PLANT / COLD WATER PLANT, MAKE L&R KÄLTETECHNIK, TYPE: WRK-17/SL/-5, PLANT BUILT 1997, COOLING AGENT R 407 C, WITH NEW COMPRESSOR AND NEW PLATE HEAT EXCHANGER IN 2014 FOR 10,000 € INVESTED, EVAPORATOR WITH 2 VENTILATOR OUTSIDE HANGING ON THE WALL 6.1 OTHERS - ABOUT 100 KETS, MAKE SCHÄFER, PLUS-KEGS, FLAT FITTING IN DIFFERENT SIZES, NEUTRAL - PARTY-KEGS, WITH BAVARIAN TAP, PU-COVERED IN BLACK AND WITH WOOD-OPTIC - ABOUT 800 NEUTRAL CLIP LOCK BOTTLES EACH 1 LT 6.2 DIMENSIONS THE ROOM HEIGHT IN BREWHOUSE AND CCTS IS 4.50M. THE PLANT AS ASSEMBLED ON 10.75 X 4.38M. PLEASE NOTE THAT THE BREWERY IS ONLY AVAILABLE AS A SINGLE SALE QUANTITY AVAILABLE: 1 Learn More

BRUCKNER BOPP EXTRUSION LINE, WIDTH 8200mm, THREE LAYERS, BUILT 1992, COMPLETED WITH AN ATLAS SLITTER/REWINDER, MODEL CW, WIDTH 8200mm. AND FURTHER AUXILIARIES, INCLUDING SPARE PARTS. NAMEPLATE CAPACITY 20,000 T/Y. RAW MATERIALS SECTION - 4 SILOS 250 M3 ALUMINIUM - 2 SILOS 100 M3 ALUMINIUM - 2 SILOS 50 M3 ALUMINIUM - PNEUMATIC TRANSPORT SYSTEM; COMPUTERIZED DOSING SYSTEM, HOPPERS AND SCALES FOR THE THREE EXTRUDERS EXTRUSION SECTION - MAIN EXTRUDERS: 2 MITSUBISHI CASCADE EXTRUDERS Ø 300 mm AND 250 mm - CO-EXTRUDERS: 2 BANDERA EXTRUDERS Ø 100 mm, EQUIPPED WITH MELT PIPES - DIE: SIMPLAST, WIDTH 1,140 mm, GAP 2 - 3.75 mm, 40 PUSH/PULL BOLTS - CHILL ROLL: Ø 3 M, 1,900,000 KJ/H COOLING CAPACITY - WATER BATH: 1.500.000 KJ/H CAPACITY MDO (MACHINE DIRECTION ORIENTATION) SECTION - PREHEATING INFRARED 130 KW - PREHEATING: 16 CHROMIUM PLATED ROLLS Ø 614 mm - STRETCHING: 6 CHROMIUM PLATED ROLLS Ø 180 mm, EQUIPPED WITH RUBBER NIP ROLLS Ø 150 mm - ANNEALING: 2 CHROMIUM PLATED ROLLS Ø 614 mm TDO (TRANSVERSE DIRECTION ORIENTATION) SECTION - TOTAL LENGTH: 66 METER - PREHEATING: 5 SECTIONS - STRETCHING : 5 SECTIONS - ANNEALING : 5 SECTIONS - NEUTRAL : 1 SECTION - COOLING : 2 SECTIONS - INLET 850 – 1,050 mm WIDTH - OUTLET 7,600 – 8,600 mm WIDTH PRS (PULL ROLL STAND) SECTION - EDGE TRIM CUTTERS - ESSECI FLAME TREATER, BURNER, CHROMIUM PLATE ROLL, RUBBER NIP ROLL - CORONA TREATER 1: 3 DISCHARGE BARS, SILICON ROLL, RUBBER NIP ROLL - CORONA TREATER 2: 2 DISCHARGE BARS, EDGE BAR, SILICON ROLL, RUNNER NIP ROLL MEASUREX/HONEYWELL GAUGE CONTROL SYSTEMS - 8.5 M SCANNER FOR FILM - 1.2 M SCANNER FOR CAST SHEET - MAIN THICKNESS CONTROL UNIT CONNECTED TO THE BOLT OF THE EXTRUSION DIE FOR LIP ADJUSTMENT WINDER - 2 TURRETS KAMPF WINDER - AUTOMATIC CUT / TURRET / MILL-ROLL CHANGE - WINDING CORES: 108 STEEL WINDING CORES Ø 500 mm CONTROL UNIT - THE LINE IS EQUIPPED WITH A FULLY INTEGRATED CONTROL SYSTEM SUPPLIED BY BRUCKNER MILL ROLL STAND (SEMI-FINISHED PRODUCTS WAREHOUSE) - 150 TOTAL POSITIONS, OF WHICH 50 IN HEATED CLOSED ROOM - 1 PICK-UP FOR LOADING / UNLOADING WINDER AND SLITTER - 1 MANUAL EMERGENCY PICK-UP FOR LOADING/UNLOADING WI NDER AND SLITTER AND MAINTENANCE - 1 SHUTTLE TO MOVE MILL ROLLS IN AND OUT OF THE WAREHOUSE - 1 MAIN CRANE FOR MOVING MILL ROLLS / EMPTY CORES RECYCLING - HERBOLD GRINDER FOR SCRAP RECOVERY - 4 FLUFF SILOS - 1 EREMA MACHINE FOR REGRANULATION, APPROX. 700 KG/H SLITTER - ATLAS CW MACHINE, BUILT 1992, MAJOR UPGRADE 2010 - INLET MILL-ROLLS MAX Ø 1.2 M, WIDTH 8.2 M - 16 REWINDING STATIONS, WIDTHS FROM 400 mm TO 2450 mm, MAX Ø 1,000 mm - AUTOMATIC KNIVES AND RE-WINDING ARMS POSITIONING PACKING - SEMI-AUTOMATIC BALLOTTI LINE FOR CONDITIONING OF ROLLS AND PALLETS, BUILT 2000 - CONVEYORS - SCALING - STRAPPING - STRETCHING UTILITIES - 3 COMPRESSORS 3 BARS FOR COMPRESSED AIR CIRCUIT FOR RAW MATERIALS HANDLING - 2 COMPRESSORS 6 BARS FOR COMPRESSED AIR - 2 CHILLERS FOR CHILLED WATER PRODUCTION - 2 WATER COOLING TOWERS - 1 BOILER FOR THERMAL OIL PRODUCTION - 3 TRANSFORMERS 15 KV TO 380 V ADDITIONAL EQUIPMENT - SPARE PARTS FOR ALL OF THE ABOVE - TECHNICAL CONSUMABLES - IT EQUIPMENT FOR CONTROLLING THE MANUFACTURING EQUIPMENT AND DATA TRAFFIC, SUCH AS SERVERS, SWITCHES AND CABLING - LABORATORY EQUIPMENT FOR QUALITY CONTROL PURPOSES Line was producing 20 to 40 microns , line can produce down to 10 to 12 microns Learn More

REFERENCE NUMBER: L-4955
BRAND: BENNINGER
MODEL: SIZETEC
TYPE: BB-S/ZT4/4TKD
YEAR: 1994

Learn More

REFERENCE NUMBER:  G-3652-C

AUTOMATIC POCKET SPRING MACHINES

MODEL 08P  AUTOMATIC POCKET SPRING MACHINE

 

WITH TWO SIDE OVERLAP WELDING BY ULTRASONIC UNIT IN THE MIDDLE OF THE POCKET. THE COIL SPRING IS STRONGER AND MORE DURABLE.  ONE ULTRASONIC UNIT SO THE COST IS REDUCED.  SERVO MOTOR CONTROL.

 

DIMENSIONS: 3400mm(L)×1160mm(W)×1600mm(H)

OUTPUT: 65 COILS PER MIN

TYPE OF SPRING              

NON-WOVEN: 65-100G/M2

NON-WOVEN ROLL DIAMETER: 500mm

SPRING DIAMETER: ∮1.8 PER∮2.2mm

SPRING HEIGHT (AFTER POCKETED): 125mm-180mm

WEIGHT: 1600kg

SPRING DIAMETER: ∮60mm TO∮75mm

SPRING CIRCLE: 6.5-9 CIRCLES

VOLTAGE: AC 3 PHASE 380V

POWER: 16KW

AIR PRESSURE: 6KGS/CM3

Learn More

TT-3880 EREMA #1521 TVER FULL LINE EREMA INTAREMA 1512_TVEPLUS PELLETIZING LINE USED EREMA INTAREMA 1512_TVEPLUS PELLETIZING LINE, NOMINAL CAPACITY RANGE 850-1250KG/HR DEPENDING ON FEED MATERIAL, CURRENTLY WITH 8505 RUN HOURS CONSISTING OF THE FOLLOWING: -FB_7000_1100_SH CLEATED FEED CONVEYOR, 1100mm (43”) WIDE X 7000mm (275”) LONG CLEATED INCLINED BELT. -DTF 1300/1100/400 PASS THRU OVER BELT METAL DETECTOR, 400mm (15.7”) TALL OPENING. Learn More

REFERENCE NUMBER: P-8704

PROTECTIVE SUIT

 

MEETS THE TECHNICAL REQUIREMENTS FOR CE AND FDA

HIGH GRAM WEIGHT NONWOVENS OF 68G/M²

ENHANCED WATER RESISTANCE, SYNTHETIC BLOOD PENETRATION RESISTANCE

PREVENT PARTICLES EFFECTIVELY

TYPE 5 AND TYPE 6 PROTECTION

SPE COATING: MOISTURE PROOF, BREATHABLE, FLEXIBLE, NON COMBUSTIBLEHIGH STRENGTH AND TENSILITY

DURABLE AND TEAR RESISTANCE

ANTISTATIC TREATMENT

REDUCE THE ABSORPTION OF HARMFUL SUBSTANCE

SELASTICATED WRISTS, ANKLES AND FACES, HOODED COVERALL

SELF ADHESIVE ZIPPER

CARTON SIZE: 49X45X44mm

GW: 8.50KG

IN A CARTON: 25PCS

 

QUANTITY: 1

Learn More

REFERENCE NUMBER: C-3784 NEEDLING LINE, WORKING WIDTH 2500mm TO 7400mm, YEAR 1994 TO 1997 DETAILS: OFFER 001 NEEDLING LINE YEAR: 1994 TO 1997 WORKING WIDTH: 6500mm CONSISTING OF: OFFER 002 HERGETH DOUBLE DOFFER CARD YEAR: 1997 WORKING WIDTH: 2500mm AVANTRAIN + 1 SWIFT UP TO 950 KG/H QUANTITY: 1 OFFER 003 ASSELIN 658 PROFILE CROSS-LAPPER YEAR: 1994 INPUT: 2500mm OUTPUT: 6800mm UP TO 120 M/MIN QUANTITY: 1 OFFER 004 FEHRER NL9 PRE-NEEDLE LOOM YEAR: 1994 WORKING WIDTH: 7400mm DOWNSTROKE STROKE: 60mm 2658 NEEDLES/M QUANTITY: 1 OFFER 005 FEHRER NL42 FINISHING NEEDLE LOOM YEAR: 1994 WORKING WIDTH: 7000mm UPSTROKE & DOWNSTROKE STROKE: 70mm 9702 NEEDLES/M QUANTITY: 1 OFFER 006 WINDING UNIT YEAR: 1994 WORKING WIDTH: 7000mm QUANTITY: 1 QUANTITY AVAILABLE: 1 LINE Learn More

REFERENCE NUMBER: R-4681 
SUCKER MULLER HACOBA SIZING MACHINE 
YEAR: 1999 
WORKING WIDTH: 1800mm
QUANTITY: 1 

Learn More