Search results for: 'compo''

EACH LINE WITH
PRE-GRINDER
DENSIFIER, MODEL HV70
REGRINDING
COOLING
DOFFING

THERE IS A PULVERIZER AT THE END OF ONE OF THE LINES THAT IS AVAILABLE

HERBOLD RECENTLY INSPECTED AND INFORMED ALL BIG COMPONENTS ARE IN GOOD CONDITION, SOME SMALLER SPARE PARTS ARE ADVISED

QUANTITY: 2 LINES

REFERENCE NUMBER: J-2184
HORIZONTAL CONVEYOR, 90 METERS LONG, 2400mm WIDE - NEW

MOTORIZED BELT-DRIVEN CONVEYOR
CONVEYING LENGTH: 90 METERS
CONVEYING WIDTH: 2400mm
CONVEYOR HEIGHT: 800mm
CONVEYING SPEED: 0 TO APPROXIMATELY 40 METERS PER MINUTE
BELTS: 200mm WIDTH x 6 PIECES, EACH 90 METERS LONG
DRIVING ROLL DIAMETER: 157mm
DRIVEN ROLL DIAMETER: 75mm
CENTER TO CENTER SPACING OF 2 ROLLS: 500mm
2 MOTORS, EACH 5.5 KW (CONVEYOR IS COMPOSED OF A TOTAL OF 4 SECTIONS. ONE 5.5 KW MOTOR DRIVES TWO SECTIONS)
1 INVERTER, 11 KW (DRIVES BOTH OF THE 5.5 KW MOTORS)
VOLTAGE: 220 VOLTS, 3-PHASE, 60 Hz

LEAD TIME: 45 WEEKDAYS FROM RECEIPT OF DEPOSIT

QUANTITY: 1

FOR FILLING DOWN FEATHER PILLOWS
FILLING RANGE: 1 TO 120 GRAMS (70% FEATHER & 30% DOWN)
WEIGHING SYSTEM: 4 SETS
POWER: 4.5 KW
VOLTAGE: 220 / 380 V, 3-PHASE
AIR PRESSURE: 0.5 TO 0.7 MPA
ACCURATE WEIGHING RESULTS WITH TOLERANCE OF ONLY 1 GRAM
WORKING TABLE DIMENSIONS: 1200 x 2400mm (FOR CUSTOMERS FILLING PILLOWS AND QUILTS)
WORKING TABLE DIMENSIONS FOR PILLOWS ONLY: 1200 x 1200mm (EASIER TO FIT IN A 20 FOOT CONTAINER)
OPERATION CAN BE HANDLED BY ONLY 1 EMPLOYEE
INCLUDES ONE AUTOMATIC FILLING TABLE WITH FOOT SWITCH AND CLAMP DEVICE
THE WORKER STEPS ON THE FOOT SWITCH AND THE CLAMP DEVICE WILL RUN TO CLAMP THE PILLOW BAG
THE FILLING PROCESS AUTOMATICALLY STARTS TO FILL THE PILLOW AND AFTER FINISHING THE CLAMP DEVICE WILL RESET
DURING THIS PERIOD, THE WORKER MAY SEAL THE PILLOW WITH SEWING MACHINE
FOUR HOPPER SYSTEM FOR CONSTANT SUPPLY
ONE KEY FOR CHARGE AND RECHARGE REDUCES WASTED TIME
HIGH-QUALITY, RELIABLE ELECTRICAL COMPONENTS
PREPROGRAMMABLE FOR UP TO 50 GROUPS OF RECIPES WITH EACH RECIPE CONTAINING UP TO 60 SETS OF DIFFERENT FILLING PARTS FOR THE SAME PRODUCTION
FULLY ENCLOSED DESIGN TO KEEP ENVIRONMENT CLEAN AND REDUCE MATERIAL WASTE
AUTOMATIC, ACCURATE WEIGHING WITH LOAD CELL TO ENSURE PRODUCTION QUALITY
CE CERTIFICATE INCLUDED
FLOORSPACE 4000mm LONG X 3000mm WIDE X 2500mm HIGH
TABLE FOR PILLOWS IS 1200 X 1200mm

QUANTITY: 1

FOR NONWOVEN MATERIALS: SPUNBOND, MELTBLOW, SPUNLACE, AIRLAID, PPE, PS, PES, NYLON66, ARAMID ETC.
OIL ABSORBER, WATERPROOF, BREATHABLE COMPOSITES
TOTAL MATERIAL THICKNESS RANGE: 20gsm TO 55gsm

WORKING WIDTH: 1600mm
CAPACITY: 10 TO 100 METERS PER MINUTE
ONE PATTERN ROLLER
TITANIUM HORNS
ULTRASONIC SYSTEM 20 KHZ, 2000 WATTS (10 SETS)
PLC CONTROLS WITH TOUCH SCREEN
ELECTRICAL: 380 VOLTS, 3-PHASE, 28 KW
AIR: 6 BAR PER CM2 , 2 LITERS PER HOUR
OPTIONAL EXTRA PATTERN ROLLER AVAILABLE (PRICED SEPERATELY)
WITH CE CERTIFICATE, TOOL BOX, USER MANUAL

LEAD TIME: 110 DAYS

QUANTITY: 1

REDUCES VOLUME FOR STORAGE AND TRANSPORTATION
USES COMPRESSED AIR AND PLASTIC COMPOSITE FILM BAGS FOR PACKAGING ITEMS AFTER COMPRESSION
EQUIPPED WITH AUTOMATIC TRANSMISSION TO COMPRESS AND FILM ITEMS UNINTERRUPTED
STANDARD MODEL EQUIPPED WITH ONE WORKSTATION WITH SINGLE SEAL (OPTIONAL ONE WORKSTATION WITH DOUBLE SEALS)
PLC TOUCH SCREEN OPERATION, USER FRIENDLY INTERFACE
CONSTANT TEMPERATURE CONTROL FUNCTION TO PREVENT BAG BURNS

VOLTAGE AND POWER: 220 V SINGLE-PHASE, 0.5 KW, 50 Hz
AIR PRESSURE: 0.4 – 0.8 MPA
PACKING CAPACITY: : 8 TO 12 ITEMS PER MINUTE
PRESS BOARD SIZE: LENGTH 700mm x WIDTH 900mm
MAXIMUM COMPRESSION THICKNESS: 500mm (AIR CYLINDER TRAVEL)
SEAL LENGTH: 880mm x 10mm
OVERALL DIMENSIONS: LENGTH 3390mm x WIDTH 940mm x HEIGHT 2010mm
POWER: 1.5 KW
NET WEIGHT: 350 KG
GROSS WEIGHT: 400 KG

QUANTITY: 1

L-6683 DOUBLE BELT COMPRESSION THERMOBONDING OVEN SYSTEM 6000mm X 3300mm WIDE

INCLUDING:

THERMOBONDING OVEN
- DOUBLE COMPRESSION CONVEYORS SYSTEM SINGLE PASS
- DOUBLE BELT SOFT & HARD WADDING OVEN (6000mm LONG)
WORKING WIDTH: 3300mm
LENGTH OF HEATING CHAMBER: 6000mm
PANELS ARE 100mm THICK
TEMPERATURE INSIDE: UP TO 220 C
GAS BURNER 25 CUBIC METER PER HOUR DEPENDING ON MATERIAL THICKNESS
TWO GAS BURNERS ONE ON EACH SIDE 80 START AND 25 RUN CBM/H WITH MAINLINE 2 INCH
REDUCED TO 1” AT BURNER, PRESSURE 10 TO 15 KPascal
TWO HOT AIR FANS 22 KW EACH
ONE EXHAUST FAN 5.5 KW
WORKING SPEED: 1 TO 8 METERS PER MINUTE
DOUBLE TEFLON BELT WITH SINGLE PASS, WEAVE IS 2mm X 2mm
SUCTION HOOD AT THE ENTRANCE
THICKNESS OF FINAL PRODUCT 20 TO 150mm DEPENDING

COOLING UNIT
- FOUR COOLING PRESS ROLLERS 200mm diameter , 10mm shell thickness, with chiller
12,000 watt output power , input power 5700 watt , capacity 65 liter per minute
WORKING WIDTH: 3300mm
- LENGTHWISE CUTTER – 7 KNIVES ,pneumatically activated , BLADE DIAMETER 650mm
-SINGLE MOTOR
- MOVABLE SIDEWAYS
- CROSS CUTTER 2.2 KW MOTOR . UP TO 4 CUTS PER MINUTE
MAXIMUM LENGTH 2000mm
WORKING WIDTH: 2800mm
PVC CONVEYOR AT THE EXIT

ELECTRICAL CONTROL SYSTEM
-ELECTRICAL CABINET UL COMPONENTS

QUANTITY: 1

COFFEE, SYRUP, LABELERS, CARTONERS AND SIMILAR EQUIPMENT

REFERENCE NUMBER: M-7912

MACHINERY TO FORM FILL AND SEAL POUCHES WITH A CORNER SPOUT (NEW)

MACHINERY TO FORM FILL AND SEAL POUCHES WITH A CORNER SPOUT (NEW)

FAST MACHINERY, QUICK CHANGEOVERS – DUAL FILM REEL WITH AUTO FILM SPLICE

STAINLESS STEEL CONSTRUCTION IS STANDARD

REFERENCE NUMBER: M-7873

CHOCOLATE CEREAL AND GRANOLA BAR AUTOMATIC LINE

AUTOMATIC LINE

FOR CHOCOLATE CEREAL AND GRANOLA BARS

AUTOMATIC COMBINATION BETWEEN THE FREEZING, FORMING, AND PRESSING ROLLERS, AND THE SLITTING TECHNOLOGY.

THIS PRODUCING LINE IS A MULTI-FUNCTION LINE WHICH CONSISTS OF KITCHEN EQUIPMENTS, FORMING AND SHEETING SYSTEM, NUTS SPRINKLING SYSTEM, FORMING AND PRESSING ROLLER, REFRIGERATION SYSTEM, COOLING TUNNEL, CANDY BAR SLITTING, CUTTING AND CONVEYING SYSTEM, AND CHOCOLATE ENROBING MACHINE, ETC.

THIS LINE TAKES THE PLACE OF THE TRADITIONAL, MANUAL WORKSHOP PRODUCTION WITH FULL AUTOMATIC MACHINERY PRODUCTION. THIS LINE WILL BE IDEAL FOR THE CANDY BAR LEISURE FOOD INDUSTRY, WITH MODERN AND LARGE QUANTITY PRODUCTION.

REFERENCE NUMBER: L-4214 
YEAR: 2007
PRODUCT WIDTIH: 2600mm
SPEED: 30 METERS PER MINUTE
BASIC WEIGHT: 50 TO 1,000 GRAMS PER SQUARE METER
OPERATING SIDE: LEFT

QUANTITY: 1