Search results for: 'Filling ma'

REFERENCE NUMBER: F-1430

FEATHER FILLING MACHINE MODEL SR-180

 

PRODUCT FEATURES

•              FULLY ENCLOSED DESIGN TO KEEP SURROUNDINGS CLEAN AND TO SAVE MATERIAL

•              AUTOMATIC WEIGHING WITH ACCURATE LOAD CELL TO ENSURE PRODUCTION QUALITY

•              FILLING TIME IS 2 TO 5 SECONDS

•              NICE DESIGN SUITABLE FOR ALL KINDS OF FABRIC

•              CE CERTIFICATE

 

•              TYPE : SR-180/280/380/480

•              DIMENSION: 1200 x 1500 x 2000MM

•              VOLTAGE: 200/380/415V 50/60HZ 3PHASE

•              POWER: 2.2 KW

•              FILLING RANGE: 0.5-10 /1-50 G, DEPENDING ON THE MATERIAL

•              ACCURACY: ±0.2G/±0.5G

•              AIR PRESSURE: 0.5-0.8MPA

•              THE COMPUTERIZED DOWN & FEATHER WEIGHING FILLING MACHINE IS MAINLY USED TO FILL JACKETS, SLEEPING BAGS, CUSHIONS, PILLOWS, PADS, COMFORTERS ETC WITH A COMPUTERIZED WEIGHING SYSTEM.

•              TWO HOPPER-SYSTEM FOR CONSTANT SUPPLY.

•              THE VACUUM FILLING FUNCTION DOES NOT HURT THE MATERIAL AND KEEPS THE ORIGINAL ELASTICITY AND SOFT HAND FEELING.

•              ACCURATE WEIGHING RESULTS; THE TOLERANCE IS WITHIN 0.2 TO

0.5 GRAM (DEPENDING ON THE RANGE OF MEASURE). IT CAN BE ADJUSTED ACCORDING TO THE PRODUCTION REQUIREMENT AND CHOOSE GROUP ERROR OR SINGLE PIECE ERROR FROM THE CONTROL PANEL

•              THE WHOLE LINE CAN BE HANDLED BY ONLY 1 OPERATOR BY VERY SIMPLE

OPERATION WHICH SAVES YOU A BIG AMOUNT OF LABOR COSTS.

•              ALL THE MATERIALS ARE INSIDE THE HOPPERS WITHOUT PRODUCING ANY DUST THAT AFFECTS THE WORKING AREA

•              KEY ELECTRICAL COMPONENTS IMPORTED

•              THE WHOLE LINE OPERATION IS CONTROLLED BY PLC SYSTEM

•              ACCORDING TO DIFFERENT QUANTITY AND QUALITY PRODUCTION REQUIREMENTS THE MACHINE CONTROL PANEL CAN BE SET UP FOR 100 GROUPS OF RECIPES AND EACH RECIPE CAN BE 50 SETS OF DIFFERENT WEIGHT VALUE FOR FILLING OPTIONS

•              THE AVERAGE FILLING TIME CAN BE 4 TO 10 SECONDS (DEPENDING ON THE ACCURACY) AND THE FILLING TIME CAN BE ADJUSTE

•              DIFFERENT REQUIREMENTS OF THE CUSTOMER CAN BE CONSIDERED BY OUR PROFESSIONAL ENGINEERS TO WORK ON OUR MACHINES SO THEY ARE SUITABLE FOR YOUR PARTICULAR NEEDS

 

•              MATERIAL HOPPER:        1200 x 1500 x 2000MM                               1PCS

•              WEIGHING SYSTEM:        1200 x 400 x 1000MM                  1PCS

•              FILLING TABLE :1200 x 550 x 1500                                            1PCS

•              PLC CONTROL SYSTEM AND CONTROL PANEL:                     1SETS

•              BLOWER:                                                                                             1PCS

•              PIPE SYSTEM

Learn More

REFERENCE NUMBER: F-1428

FEATHER FILLING MACHINE MODEL SR-2

PRODUCT FEATURES

•             FULLY ENCLOSED DESIGN TO KEEP SURROUNDINGS CLEAN AND TO SAVE MATERIAL

•             AUTOMATIC WEIGHING WITH ACCURATE LOAD CELL TO ENSURE PRODUCTION QUALITY

•             FILLING TIME IS 2 TO 5 SECONDS

•             NICE DESIGN SUITABLE FOR ALL KINDS OF FABRIC

•             CE CERTIFICATE

 

•             ITEM NO.: SR-2

•             DIMENSION: APPROX. 11000 x 2500 x 3000MM

•             VOLTAGE: 200/380415V 50/60HZ 3PHASE

•             POWER: 13KW

•             FILLING RANGE: 2 TO 100 G, DEPENDING ON THE MATERIAL

•             ACCURACY: ±1G

•             AIR PRESSURE: 0.5-0.8MPA

•             THERE ARE 4 WEIGHING SYSTEMS AND ONE WORKING TABLE FOR DOWN FEATHER

•             IT IS MAINLY USED TO MAKE DOWN FEATHER QUILT

•             IT INCLUDES TWO AUTOMATIC FILLING TABLES, THE WORKING TABLE INCLUDES PNEUMATIC CLAMPING DEVICE FOR TWO FILLING PIPES, COMPOUND SHOE CLAMPING DEVICE, RING CLAMPING DEVICE AIR SUCTION, COMPRESSED AIR RING INJECTOR

•             THE FEATHER DOWN FILLING USES VACUUM METHOD STYLE FUNCTION THAT HELPS TO KEEP THE MATERIAL SOFT, ELASTIC AND HAND FEELING AND AVOIDS THE FEATHER BEING DAMAGED DURING THE FILLING PROCEDURE

•             WEIGHING ACCURACY CAN BE CONTROLLED WITHIN 1 GRAM WHICH CAN BE ADJUSTED BY SINGLE SET OR SINGLE PIECE ACCORDING TO DIFFERENT REQUIREMENT OF DIFFERENT PRODUCTS.

THIS HELPS QUALITY CONTROLLING AND AVOIDS MATERIAL WASTE ALSO

 

 

 

•             SIMPLE OPERATION THAT SAVES LABOR COST AND THE WHOLE SET CAN BE HANDLED BY ONE OPERATOR.

•             WORKING SURROUNDINGS ARE KEPT CLEAN BECAUSE ALL FILLING MATERIALS ARE KEPT INSIDE OF THE HOPPER

•             ADVANCED TECHNOLOGY LEVEL; THE WHOLE SET IS CONTROLLED BY PLC SYSTEM WITH AN ENGLISH OPERATION MENU WHEREIN 100 RECIPES CAN BE SET UP, EACH RECIPE CAN BE SET UP WITH ABOUT 80 SETS OF WEIGHT VALUE WHICH IS SUITABLE FOR VERY COMPLICATED PRODUCT DESIGN WITHIN ONE PIECE

•             HIGH WORKING CAPACITY; THE AVERAGE MATERIAL MEASURING TIME IS 4 TO 6 SECONDS. THE FILLING TIME CAN BE ADJUSTED AS DESIRED SO THAT TWO FILLERS CAN BE HANDLED BY ONLY ONE OPERATOR.

•             WITH OUR PROFESSIONAL R&D GROUP WE CAN DESIGN THE INDIVIDUAL FILLINGS ACCORDING TO YOUR REQUIREMENTS

 

EQUIPMENT INCLUDED:

 

•             MATERIAL HOPPER: DIA.1700 x 2500        1PCS

•             WEIGHING SYSTEM: 800 x 1000 x 1200MM           2PCS

•             PLC CONTROL SYSTEM & CONTROL PANEL:           1 SETS

•             MATERIAL CHANGING HOPPER: 1200 x 1200 x 2500MM  1PCS

•             AIR HOPPER: 1200 x 1200 x 2500MM        1PCS

•             MATERIAL FEEDER: 1200 x 1200 x 1200MM            1PCS

•             BLOWER:             4PCS

•             PIPE:      1SET

•             AUTOMATIC WORKING TABLE:  2SETS

•             ENGLISH EDITION ARTICLE AND VIDEO FOR OPERATION DESCRIPTION

Learn More

REFERENCE NUMBER: M-5004 (1212CKWDHH11) L PILLOW FILLING MACHINES DIFFERENT CAPACITIES FOR THIS MACHINE 100KG/H, 120KG/H, 220KG/H, 250KG/H FUNCTION OF THE PILLOW FILLING MACHINE: THE SMALL PIECES OF RAW COTTON OPENING INTO A FLUFFY IMITATION SILK, COTTON, AND USED THE WIND SUCTION OUT FROM OPENING MACHINE, IMITATION SILK COTTON BY METAL DUCT INTO THE CUSHION OR PILLOW. OPERATOR CONTROL THE COTTON FILLING TIME. IT WILL CONNECT WITH THE FIBER OPENING MACHINE THE PRODUCTION LINE INCLUDES FIBER OPENING, CONVEYING, MIXED STIRRING AND STUFFING. IT MIXES AND STIRS MANY KINDS OF STUFFING MATERIALS AND THEN FILLS THEM INTO THROW PILLOWS, CUSHIONS, PILLOWS, PET PRODUCTS, BIG PLUSH TOYS, AND OTHERS. THE OPENING RATE OF THE MACHINE IS UP TO 100%, NO DAMAGES TO FIBER CRIMP AND SLIPPERY. THE STUFFED PRODUCT IS FLUFFY, ELASTIC, AND SOFT. REASONABLE AND EFFICIENT STRUCTURAL CONFIGURATION IMPROVES MANUFACTURING EFFICIENCY, SAVES COT FOR CUSTOMERS, AND DECREASES LABOR INTENSITY. ALL WORK TEETH ARE PROCESSED WITH DYNAMIC BALANCE, NO VIBRATION AND LOW NOISE IN THE OPERATION. THE MACHINE CAN BE FREELY COMBINED BASED ON CUSTOMER’S CHOICE OF AN OPENER AND A FILLING MACHINE, SATISFYING DIFFERENT CUSTOMER’S REQUIREMENTS. CE CERTIFICATION (MODEL: 001) PILLOW FILLING MACHINE CAPACITY: 100KG/H POWER: 6.7KW PRESSURE: 0.4 TO 0.8 MPA VOLTAGE: AS PER CUSTOMER REQUIREMENT NET WEIGHT: 680KG DIMENSION: 3200mm x 1500mm x 1330mm (MODEL: 002) PILLOW FILLING MACHINE CAPACITY: 120KG/H POWER: 6.7KW PRESSURE: 0.4 TO 0.8 MPA VOLTAGE: AS PER CUSTOMER REQUIREMENT NET WEIGHT: 700KG DIMENSION: 3500mm x 1500mm x 1330mm (MODEL: 003) PILLOW FILLING MACHINE CAPACITY: 220KG/H POWER: 10.45KW PRESSURE: 0.4 TO 0.8 MPA VOLTAGE: AS PER CUSTOMER REQUIREMENT NET WEIGHT: 900KG DIMENSION: 4000mm x 2200mm x 1200mm (MODEL: 004) PILLOW FILLING MACHINE CAPACITY: 250KG/H POWER: 10.45KW PRESSURE: 0.4 TO 0.8 MPA VOLTAGE: AS PER CUSTOMER REQUIREMENT NET WEIGHT: 1050KG DIMENSION: 4500mm x 2500mm x 2050mm QUANTITY AVAILABLE: 1 Learn More

TT-7461 TETRA PAK® TBA 19 FILLING MACHINE, YEAR 1996 1. TETRA PAK® TBA 19 FILLING MACHINE 2. YEAR OF CONSTRUCTION 1996 3. CONDITION USED 4. MACHINE TYPE: FILLING MACHINE 5. BRAND: TETRA PAK® 6. MODEL: TBA 19 7. OPERATING HOURS: 45,739 H QUANTITY: 1 Learn More

REFERENCE NUMBER: M-7677
HIGH SPEED ALUMINUM NESPRESSO FILLING SEALING MACHINE
TECHNICAL PARAMETERS:
MODEL #1:
SPEED: 8,500 TO 9,600 CUPS PER HOUR
WORKING STATION: 4 LANES
MACHINE SIZE (LxWxH): 5000mm x 1000mm x 2600mm
MODEL #2:
SPEED: 4,000 TO 4,800 CUPS PER HOUR
WORKING STATION: 2 LANES
MACHINE SIZE (LxWxH): 5000mm x 900mm x 2600mm

Learn More

REFERENCE NUMBER: M-3064 (77056HJ6UF) 05B STYROFOAM BALL FILLING MACHINE STYROFOAM BALL FILLING MACHINE MODEL 05B DIMENSION: 3700mm X 1100mm X 2623mm VOLTAGE: 3 PHASE BY ORDER POWER: 2.7 KW CAPACITY: 500 TO 600 KG/H AIR PRESSURE: 0.8 MPA FILLING SLOT: 4 PCS WEIGHT: 510 KG QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: M-3063 (77049NB6UF) F05A STYROFOAM BALL FILLING MACHINE STYROFOAM BALL FILLING MACHINE ITEM F05A DIMENSION: 3700mm X 900mm X 2623mm VOLTAGE: 3 PHASE BY ORDER POWER: 2.7 KW CAPACITY: 200 TO 300 KG/H AIR PRESSURE: 0.8 MPA FILLING SLOT: 2 PCS WEIGHT: 460 KG QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: K-0750 FILLING MACHINE FOR POLYSTYRENE VIRGIN BEADS EPS POLYSTYRENE BEANS FILLING MACHINE DIMENSIONS: 1600MM X 1400MM X 2100MM VOLTAGE: 380V 50HZ 3PHASE (OR AS CLIENT'S REQUIREMENT) POWER: 7.2KW CAPACITY: 500 TO 600 KGS PER HOUR WEIGHT: 320 KG PER HOUR FILLING SLOT: 2 SLOTS QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: E-9990 COMPUTERIZED PILLOW FILLING MACHINE - NEW MODEL: 003-PF WITH OPENING SECTION DIMENSIONS: 5000 X 5000 X 1400mm (16.4 FEET X 16.4 FEET X 55 INCHES) EQUIPMENT: FIBER OPENER 1 PCS; FAN 1 PCS; FILLING LOT 2 SET; PLC CONTROL SYSTEM 1 PCS VOLTAGE: AS PER CUSTOMER'S REQUEST CAPACITY: 150-180KG/H (300 TO 400 LBS/HR) FIBER OPENING RATE: MORE THAN 98% AND NOT BE DAMAGED WEIGHT: 690KG (1500 LBS) PLC (COMPUTER) CONTROL SYSTEM QUANTITY AVAILABLE: 1 Learn More

THIS MACHINE PROVIDED WITH A BRAKING SYSTEM WHICH PERMITS THE FILLING OF WADDING PILLOWS AND QUILTS WITH ALL MATERIALS (POLYESTER, FEATHER, EXPANDED POLYURETHANE, COTTON, WOOL, ETC.) THE PARTICULAR WIDENED SHAPE OF THE TURBINE MAKES IT POSSIBLE TO OBTAIN REMARKABLE PERFORMANCES IN THE FILLING UP USING THE SPECIAL TUBE IT IS POSSIBLE TO SUCK UP THE MATERIAL DIRECTLY FROM THE VARIOUS CONTAINERS. THE BRAKING IS VERY RAPID (ABOUT 1/10 OF SECOND) AND DOES NOT REQUIRE MAINTENANCE SINCE IT IS OBTAINED THROUGH A PNEUMATIC DEVICE. THE CONTROL DEVICE IS A PNEUMATIC FOOT-LEVER WHICH LEAVES THE OPERATOR’S HANDS UNENGAGED. SAFETY MOTOR PROTECTOR SWITCH. IT CAN BE SUPPLIED BOTH IN A ONE-PHASE AND IN A THREE-PHASE VERSION. THE MACHINE IS CONSTRUCTED IN CONFORMITY WITH THE EEC DIRECTIVES 2006/42/CE, 2004/108/CE E 2006/95/CE AND SUCCESSIVE MODIFICATIONS AND MARKED CE. ON REQUEST WITH SPEED VARIATION THE FAN SPEED IS ADJUSTABLE FROM 2000 TO 4200 RPM, IN ORDER TO OPTIMIZE THE SPEED OF FILLING TO THE SHAPE AND THE SIZE OF THE PILLOW AT MAXIMUM SPEED, THE AMOUNT OF MATERIAL FILLED IS ABOUT 200 GRAMS PER SECOND. ON THE PART OF THE MACHINE THE LOAD OF THE MATERIAL, THERE ARE 2 DAMPERS. THIS PREVENTS THE OVERLOADING OF THE TURBINE AND THE BLOCK OF MATERIAL, BECAUSE WHEN I RELASE THE PEDAL, FIRST I BLOCK THE FLOW OF MATERIAL AND THEN THE AIR FLOW. THE PARTICULAR SHAPE OF THE OUTLET PIPE ALLOWS TO FILL THE PILLOWS THAT HAVE AIR-TIGHT LINING. THE TURBINE IS MADE OF A CAST ALUMINUM. THE COMMAND TO THE DUMPERS IS GIVEN BY A PEDAL, SO THE OPERATOR HAS BOTH HANDS FREE. THE APPLICATION OF THE GRIPPERS ON THE OUTLET PIPE OF THE FILLER R 3PV ALLOWS A SINGLE OPERATOR TO USE MORE FILLERS. FURTHERMORE, IT IS POSSIBLE CHANGE THE TIME THAT THE GRIPPERS STAY CLOSED. THIS ALLOWS TO SET THE AMOUNT OF MATERIAL TO PUT INSIDE HE PILLOW, WITH A GOOD PRECISION. THE TIME IS ADJUSTABLE TO FILL DIFFERENT KINDS OF PILLOWS WITH DIFFERENT AMOUNTS OF MATERIAL. QUANTITY: 1 Learn More