Search results for: 'Tape p'

TT-2994 DOUBLE SHAFT SLITTER REWINDER (VERTICAL), WIDTH 1300mm (51 INCHES) DOUBLE SHAFT SLITTING & REWINDING MACHINE FOR PAPER, ADHENSIVE TAPE, LABEL ETC. EFFECTIVE WIDTH: 1300mm (51 INCHES) UNWIND DIAMETER: 1000mm (40 INCHES) MINIMUM SLITTING WIDTH: 5mm (0.196 INCHES) REWIND DIAMETER: 650mm (25.5 INCHES) MACHINE SPEED: 300 METERS/MIN. POWER SOURCE: PLEASE ADVISE VOLTAGE REQUIRED AIR SOURCE: 5 KGS (SUPPLIED BY USER) QUANTITY: 1 Learn More

T-7930 GAUZE SWAB FOLDING MACHINE, 100 X 100mm, UNFOLD EDGES POWER SUPPLY: 380V/50Hz/3PH. AC AND COMPRESSED AIR PRESSURE: ≥0.6MPA MACHINE SIZE: 2500(L) X 2200(W) X 1900(H)mm COMPRESS PER MINUTE BY EACH PRODUCTION LANE: 40 TO 45 PIECES PER MIN DEPENDS ON GAUZE QUALITY. THIS MODEL IS EQUIPPED 4 PRODUCTION LANES. Learn More

T-7929 GAUZE SWAB FOLDING MACHINE, 75 X 75mm, UNFOLD EDGES POWER SUPPLY: 380V/50Hz/3PH. AC AND COMPRESSED AIR PRESSURE: ≥0.6MPA MACHINE SIZE: 2500(L) X 2000(W) X 1900(H)mm COMPRESS PER MINUTE BY EACH PRODUCTION LANE: 40 TO 45 PIECES PER MIN DEPENDS ON GAUZE QUALITY. THIS MODEL IS EQUIPPED 5 PRODUCTION LANES. Learn More

T-7928 GAUZE SWAB FOLDING MACHINE, 50 X 50mm, UNFOLD EDGES POWER SUPPLY: 380V/50Hz/3PH. AC AND COMPRESSED AIR PRESSURE: ≥0.6MPA MACHINE SIZE: 2500 (L) X 1900 (W) X 1900 (H)mm COMPRESS PER MINUTE BY EACH PRODUCTION LANE: 40 TO 45 PIECES PER MIN DEPENDS ON GAUZE QUALITY. THIS MODEL IS EQUIPPED 6 PRODUCTION LANES. Learn More

T-7927 GAUZE SWAB FOLDING MACHINE, 100 X 100mm, FOLDED EDGES POWER SUPPLY: 380V/50Hz/3PH. AC AND COMPRESSED AIR PRESSURE: ≥0.6MPA MACHINE SIZE: 2500 (L) X 1900 (W) X 2200 (H)mm COMPRESS PER MINUTE BY EACH PRODUCTION LANE: 40 TO 45 PIECES PER MIN DEPENDS ON GAUZE QUALITY. Learn More

REFERENCE NUMBER: A-1876
END OF LINE UNIT T4.0 FOR NEEDLEPUNCHED PRODUCTS – 4000mm

PRODUCT TO BE PROCESSED: NEEDLEPUNCHED NONWOVENS
PRODUCT WIDTH: 4.000 MM

WORKING SPEED: 1 – 20 M/MIN

QUANTITY: 1

Learn More

J-4915 SPUHL ANDERSON TE-32 TAPE EDGE MACHINE, QUEEN SIZE QUANTITY: 1 Learn More

TT-1688 SINGER 300U SEWING HEAD, SUITABLE FOR ALL TAPE EDGE MACHINES, MAXIMUM SEWING SPEED 3000 RPM SUITABLE FOR ALL TABLES FIT THE ULTIMATE SINGLE NEEDLE, TWO THREADS CHAINSTITCH Learn More

YY-1285 COMPUTERIZED CONTINUOUS EDGE FOLDING & SEWING MACHINE, PRODUCT WIDTH 1800 TO 2000mm SUITABLE FOR CURTAIN OR OTHER HOME TEXTILES WHERE THERE IS A NEED TO SEW EDGES CONTINUOUSLY. QUANTITY: 1 Learn More

REFERENCE NUMBER: M-5102 (1212FPDWXX11) L NEGATIVE & POSITIVE RAPIER HERCULES WEAVING MACHINES WIDTH 5500mm – FOR HEAVY FABRICS NEGATIVE & POSITIVE RAPIER HERCULES H5500 WEAVING MACHINES 20 SHAFTS NOMINAL WIDTH 5500mm MAXIMUM REED WIDTH 5500mm MINIMUM REED WIDTH 4400mm STANDARD BASIC MACHINE FOR VOLTAGE 440 V AND FREQUENCY OF 60 HZ DIRECT DRIVE MOTOR, SPEED CONTROLLED BY MICROPROCESSOR WITHOUT CHANGE OF PULLEY, WITHOUT CLUTCH SYSTEM, WITH (15%-40%) ELECTRIC POWER SAVING DEPENDING FROM TYPE OF WOVEN FABRIC SHEDDING MACHINE: STAUBLI DOBBY MODEL 2668 20 RODS SHAFTS TYPE GROB HEALD FRAME WITH UNDER MOTION 20 LEVER DRC CASTLE ELECTRIC CABINET WITH MICROPROCESSOR, ELECTRONIC PICK FINDING, ELECTRONIC LET-OFF, ELECTRONIC TAKE-UP UNIT WITH INDEPENDENT MOTOR ELECTRONIC WEFT COLOUR SELECTOR IN EXECUTION FOR 8 COLORS TAKE-UP WITH ROLLER DIAMETER 219mm 6 TWIN BEAM DIAMETER 219mm WITH FLANGE 1000mm Q3 JUMBO BACK REST BAR FOR HERCULES WEFT DENSITY VARIABLE PROGRAMMABLE BY THE OPERATOR AT YOUR CHOICE HORIZONTAL CREEL 4 COLOURS AND SUPPORT FOR 8 CONE 4 WEFT FEEDERS ROJ CHRONO X3 3 WEFT BRAKES FOR EVERY CHRONO X3 (TOTAL 12 PCS) TO BE SELECT AS PER CUSTOMER WEFT YARN WEFT CONTROLLING UNIT ELTEX MODEL G3W. DEROULÈ LATERAL MINI CREELS SUPPORT FOR 24 CONES LATERAL MOTORIZED LENO SYSTEM HEATING SCISSOR-CUTTING LATERAL TEMPLES: TO BE DEFINED DEPENDING THE FABRIC CHARACTERISTIC 20 FRAMES GROB TYPE 331 C TYPE DRC S227 GROBTEX ALFIX-U 14.000 GROB HEALDS TYPE 8 X 3.8 TYPE GROZ AETEX SP 0.38 331 8.0X3.8 I CR (7000PCS PER PACK) 1 WARP STOP MOTION 6-30 GROB FKW LED 14.000 GROB DROP WIRE TYPE GROZ EOU 1405 180X11X0.50 ZN (2000PCS PER PACK) SETS OF NEGATIVE RAPIERS & TAPE (LEFT AND RIGHT SIDE) SETS OF POSITIVE RAPIERS & TAPE (LEFT AND RIGHT SIDE) POSITIVE RAPIER KIT (FULL COMPONENT) CENTRAL GEARBOX ALREADY INSTALLED AND COLOR SELECTOR ALREADY ASSEMBLED FOR POSITIVE VERSION APPLICATION (TO REDUCE TIME OF CONVERSION) SETS AND EQUIPMENT OF LOOM TOOL CASE WITH TOTAL TOOLS LIKE TECHNICIANS INCLUDING NR. 2 TORQUE TOOL EXTRA SPARE PARTS THE TOTAL MACHINE SUPPLY WILL ALSO INCLUDE 2 SETS OF NEGATIVE RAPIERS (LEFT AND RIGHT SIDE) 2 SETS OF NEGATIVE TAPES (LEFT AND RIGHT SIDE) 2 SETS OF POSITIVE RAPIERS (LEFT AND RIGHT SIDE) 2 SETS OF POSITIVE TAPES (LEFT AND RIGHT SIDE) 1 POSITIVE RAPIER KIT (FULL COMPONENT) 1 SET AND EQUIPMENT OF LOOM 1 TOOL CASE WITH TOTAL TOOLS LIKE TECHNICIANS INCLUDE 2 TORQUE TOOLS EXTRA SPARE PARTS 1500EUR/MACHINE WARRANTY: ONE YEAR FROM MACHINE ERECTION OR AFTER 3 MONTHS DELIVERY DATE QUANTITY: 1 Learn More