Search results for: 'Web'

T-9717 COLD PIN PERFORATING UNITS, WORKING WIDTH 1800mm, REFURBISHED COLD PIN PERFORATING UNITS REFURBISHED WORKING WIDTH 1800mm YEAR: UNKNOWN, ESTIMATED TO BE LATE 1990’s WORKS WITH PLASTIC FILM, FOIL OR PAPER AND SOME NONWOVENS COLD PIN PERFORATING UNIT CAN BE USED FOR PERFORATING OR EMBOSSING EASY TEAR LINES FOR BAGS PRODUCT EMBOSSING FOR GRIP OR IDENTIFICATION WEB DRIVEN UNIT DIMENSIONS: 23” (585mm) WIDE X 36” (915mm) TALL X 105” (2667mm) LONG NO PINNED TOOLING IS INCLUDED WITH THE UNIT HOWEVER, A WIDE RANGE OF PINNED TOOLING CAN BE USED WITH THIS UNIT TO CREATE AN ARRAY OF HOLE SIZES AND PATTERNS. QUANTITY: 2 Learn More

T-9660 COMCO FLEXO LABEL PRESS, 11 COLORS, 22”, YEAR 1999 NOTES: INCLUDES GAS FIRED DRYING SYSTEM IN P/S 1-10, CHAMBERED DR. BLADE ASSEMBLIES, UV LAMINATION IN P/S 11, FORWARD/REVERSE PRINT IN P/S 1, KTI LS BUTT SPLICER ON UNWIND, KTI MR TWO-SPINDLE TURRET REWIND, KTI LAM UNWIND W/WEB GUIDE, 2012 ENERCON COMPAK 2000 CORONA TREATER AND 2006 CARRIER AQUA-SNAP 22-TON CHILLER. COMPLETE PRESS REBUILD IN 2012. 1. IN ADDITION WATER BASED LAMINATION CAPABILITIES IN STATION 11 WITH RUN SPEEDS UP TO 425 FPM DEPENDING ON STRUCTURE. 2. ENERCON TREATER REBUILT ON 6/5/2020. 3. COATING SLEEVE CYLINDER AND SLEEVE CHANGE OUT AIR STAND FOR GLUE STATION. 4. EXTENSIVE PLATE CYLINDER LIBRARY 5. ADDITIONAL DOCTOR BLADE CHAMBERS Learn More

H-1305 BATT FEEDING SYSTEM - WORKING WIDTH 3000mm

WORKING WIDTH: 3000mm
CONTROL SYSTEM INCLUDED

COMPOSITION OF THE MACHINE:
- LOWER PVC INCLINED CONVEYOR BELT FOR THE TRANSPORT OF THE WEB FROM THE CROSS LAPPER TO THE ENTRANCE OF THE NEEDLE LOOM.
- UPPER PVC COMPRESSION BELT FOR THE PRE-COMPRESSION OF THE WEB BEFORE ENTERING THE FEEDING ROLLS.
- LOWER PVC CONVEYOR AND UPPER PVC BELT DRIVEN BY ONE GEARBOX MOTOR WITH INDEPENDENT FREQUENCY INVERTER.
- PAIR OF FEEDING ROLLS WITH PLASTIC FINGERS TO GUIDE THE COMPRESSED WEB CLOSE TO FIRST NEEDLE ZONE OF THE PRE-NEEDLE LOOM. ROLLER PAIR DRIVEN BY GEARBOX MOTOR WITH INDEPENDENT FREQUENCY INVERTER.
- BATT FEEDING SYSTEM INSTALLED ON RAIL SYSTEM AND EASY REMOVABLE FOR MAINTENANCE OF THE NEEDLE LOOM

TECHNICAL DATA:
ELECTRICAL INFORMATION:
ELECTRIC: MAIN VOLTAGE 400 V, 50 HZ, 3 PH.
CONTROL VOLTAGE: DC - 24 V / AC - 230 V
OTHER INFORMATION:
AIR PRESSURE (CONSTANT): MIN. 6 BAR (AT SITE)
OPERATOR SIDE LEFT OR RIGHT (IN WEB RUNNING DIRECTION)
LACQUER COATING:
MAIN COLOR OF THE MACHINES: RAL 7035 (LIGHT GREY)
CONTROL CABINET AND CONTROL DESK RAL 7035 (LIGHT GREY)
LABELING: ENGLISH
TECHNICAL DOCUMENTATION: ONE TIME ON CD-ROM (FURTHER SETS AVAILABLE AT ADDITIONAL COST)
LANGUAGE FOR OPERATING INSTRUCTIONS: ENGLISH
LANGUAGE FOR FURTHER DOCUMENTATION (SPARE PART LISTS, WIRING DIAGRAM, ETC): ENGLISH

ENVIRONMENTAL CONDITIONS:
INSTALLATION HEIGHT ABOVE SEA LEVEL: LESS THAN OR EQUAL TO 1,000 METERS
TEMPERATURE: 24° C (±2° C)
RELATIVE HUMIDITY: 65% (±5%)
ABSOLUTE WATER CONTENT: 9 TO 12 G/KG DRY AIR
NOTE: PLEASE MAKE SURE THAT THE TEMPERATURE INSIDE THE CONTROL CABINET DOES NOT EXCEED 450 CENTIGRADE. IN CASE OF EXCESSIVE ROOM TEMPERATURES WE RECOMMEND AN AIR-CONDITIONING SYSTEM FOR THE CONTROL CABINETS TO AVOID MALFUNCTION OF ELECTRICAL COMPONENTS

QUANTITY: 1

Learn More

M-6053 SPUNBOND PRODUCTION LINE, WORKING WIDTH 4040mm TO 4500mm

OFFER 001
SPUNBOND PRODUCTION LINE
WORKING WIDTH: 4040mm
WEIGHT: 130 TO 250 G/M2

OFFER 002
POLYMER CLEANING GROUP

OFFER 003
CRYSTALLIZING GROUP

OFFER 004
DRYING GROUP

OFFER 005
PNEUMATIC CONVEYING SYSTEM

OFFER 006
EXTRUDER HOPPER

OFFER 007
EXTRUDER

OFFER 008
FILTERING UNIT

OFFER 009
MELT TRANSFER LINE

OFFER 010
SPINNING BEAM

OFFER 011
SPINNING PACKS

OFFER 012
FILAMENTS QUENCHING SYSTEM

OFFER 013
FILAMENTS DRAWING AND DISTRIBUTION SYSTEM

OFFER 014
WEB FORMING CONVEYOR BELT

OFFER 015
CREEL FOR APPLICATION OF REINFORCING FILAMENTS

OFFER 016
PRE-NEEDLING MACHINE

OFFER 017
NEEDLING MACHINE

OFFER 018
THERMOSETTING UNIT

OFFER 019
OUTLET CALENDER

OFFER 020
FOULARD

OFFER 021
BINDER PREPARATION SYSTEM

OFFER 022
DRYER

OFFER 023
OUTLET CALENDER

OFFER 024
AUTOMATIC WINDER

OFFER 025
AIR COMPRESSORS (FOR FILAMENTS STRETCHING EJECTORS)

OFFER 026
DIATHERMIC OIL HEATING SYSTEM

OFFER 027
CHILLED WATER CIRCULATION AND GENERATION SYSTEM

OFFER 028
EQUIPMENT FOR CLEANING CYCLE, SPECIAL TOOLS

OFFER 029
FIBRE DUST RECOVERY SYSTEM

OFFER 030
EDGES RECOVERY SYSTEM

OFFER 031
SPINNING SECTION STEEL STRUCTURE

OFFER 032
DISTRIBUTION ELECTRIC CABINETS

OFFER 033
PROCESS ELECTRIC SYSTEM OF EXISTING MACHINES ACCORDING TO THE ACTUAL LAYOUT

OFFER 034
CABLES AND CABLING MATERIALS

QUANTITY: 1 LINE

Learn More

REFERENCE NUMBER: X-1016 NONWOVEN LINE FOR PRODUCING POLYESTER BATTING WIDTH 3600 mm (NEW 2015) 1) –Opening and Blending line 2) - CROSSLAPER 3)- Thermobonding Oven 4) – Including main control panel. 3 YEAR EXTENDED WARRANTY OUR COMPANY OFFERS INSTALLATION AND COMMISSIONING OF THIS LINE FOR OUR MACHINES 2 TECHNICAL IN THE PLACE TO BE APPOINTED BY THE CUSTOMER. Learn More

REFERENCE NUMBER: M-5300 (131342BVGT12UF) L UNDER PAD PRODUCTION LINE UNDER PAD PRODUCTION LINE MODEL: 100CD PRODUCTS TO BE PRODUCED: 3 SIZES OF DISPOSABLE UNDER PAD (SIZE: 600x900mm, 600x600mm, 600x400mm) MECHANICAL DRIVING SYSTEM WITH INVERTER CONTROL PRODUCT STRUCTURE: FLUFF +SAP; TOP TISSUE; BOTTOM TISSUE; TOP SHEET; BACK SHEET QUANTITY AVAILABLE: 1 Learn More

TT-8597 KUESTERS CONTINUOUS FABRIC WASH RANGE, WORKING WIDTH 3200mm, YEAR 2017 1. KUESTERS-ZIMA FABRIC WASH RANGE 2. BRAND: KUESTERS ZIMA, PLEVA, WUMAG, WEBCON 3. WORKING WIDTH: 3200mm QUANTITY: 1 Learn More

TT-8072 SHM TWIN KNIFE MODEL 1400DK 55” DIGITAL SHEETER, YEAR 1998 TO 2018 1. SHM TWIN KNIFE MODEL 1400DK 55” DIGITAL SHEETER 2. YEAR 1998 TO 2018 3. UPGRADED 7/2018 BY SHEET TECH INC QUANTITY: 1 Learn More

TT-8036 MITSUBISH D-16, CUT OFF 546, YEAR 2001 1. MITSUBISH D-16, CUT OFF 546 2. YEAR 2001 3. MITSUBISHI INFEED INCLUDING WEB GUIDE & TENSION SENSING DEVICE 4. API CONTROL CONSOLE QUANTITY: 4 UNITS Learn More

TT-7790 DUSENBERY MODEL 835 L3 DUPLEX CANTILEVERED SLITTER REWINDER, 63” 1. 63” WIDE USED DUSENBERY MODEL 835 L3 CANTILEVERED SLITTER REWINDER 2. UNWIND DIAMETER: 40” 3. ONE PNEUMATIC 3” DIAMETER UNWIND SHAFT. CONDITION: USED QUANTITY: 1 Learn More