Search results for: 'appa'

REFERENCE NUMBER: M-5199 (1313ATGNXX12) L SANTEX SANTASHRINK DRYER YEAR 2001 BRAND: SANTEX POST-PRINTING DRYING APPARATUS DRYING LOFTS POWER SUPPLY: THERMO OIL HEATING YEAR: 2001 QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: M-4089 (990DJSKXX8) L

COMPLETE RIETER RING SPINNING & YARN DYE FACTORY – 37,056 SPINDLES- will sell individually

 

FACTORY WAS PRODUCING VARIOUS SPECIALTY YARNS FOR USE IN APPAREL AND TECHNICAL TEXTILES

ALL RING FRAMES SHORT STAPLE FOR FIBERS UP TO 40mm, 220mm TUBES, APPROXIMATELY HALF OF THE RING FRAMES ARE WITH PINTER CORE DEVICE OR AMSLER SLUBBING DEVICE. AMSLER AND PINTER AVAILABLE TO SELL SEPARATELY.

 

CARDING

COMBERS

ROVING/FLYERS

RING SPINNING

WINDING

TWISTING

COMPLETE YARN DYE HOUSE & DYE LAB

 

QUANTITY AVAILABLE: 1

Learn More

REFERENCE NUMBER: E-1094 TWO LIROPOL PILE TERRY KNITTING MACHINES FOR SALE: (A) YEAR 1988 F12 MODEL 14122 SUITABLE FOR THE MANUFACTURING OF SINGLE OR DOUBLE PILE KNITTING PRODUCTS MULTIBAN WITH FINSIHED SELVEDGES POSSIBLE (B) YEAR 1988 WORKING WIDTH: 1850 MM MODEL 14122 EQUIPPED WITH THE APPALACHION EL. BEAM DRIVE MECHANISM MADE IN THE USA QUANTITY AVAILABLE: 2 MACHINES Learn More

REFERENCE NUMBER: M-4868 (1111275NKG10RX) L PUB BREWERY 20HL SPECIFICATION: 1. MALT HANDLING - CYLINDER-CONIC MALT SILO WITH 25M³ CONTENT, MADE IN FIBRE GLASS / PLASTIC, STANDING OUTDOOR ON STEEL CONSTRUCTION - MALT CONVEYORS / SPIRAL CONVEYOR INTO 1ST FLOOR - 2-ROLLER MALT MILL - GRIST CASE - FALL PIPE IN MASH COPPER (FOR DUST FREE MASHING-IN) - GIBBET-LIFT FOR BAGGED SPECIAL MALTS 2. BREWHOUSE TOWER BREWHOUSE FOR 20 HL / BREW, COMPLETE IN STAINLESS STEEL, BUILT 1994, STEAM HEATED, ISOLATED AND COVERED WITH STAINLESS STEEL SHEET, 2 CRANE EYELET, 2 STAINLESS STEEL PLATFORM, WITH: - MASH- / WORT COPPER WITH BOTTOM HEATING ZONE AND INTERIOR COOKER, SIDEWAYS AGITATOR, MANWAY ENTRANCE HATCH, LIGHTNING, STEAM REGULATION VALVE - LAUTER TUN, WITH STAINLESS STEEL RAKING MACHINE WITH SEW-DRIVE FROM TOP, WITH SPENT GRAINS SLIDER, STAINLESS STEEL FALSE BOTTOM, SPENT GRAINS HATCH, VERTICAL SIGHT GLASS, LIGHTNING, SPRAY HEAD, DOME LID WITH BUILT IN CONTROL CABINET - SPINDLE STATION WITH WASHING TABLE IN STAINLESS STEEL, ABOUT 1,5M WALL ASSEMBLED - HOT WATER TANK, WITH 30 HL, IN STAINLESS STEEL, ISOLATED AND COVERED WITH STAINLESS STEEL SHEET, HEATABLE, WITH MANWAY IN THE WALL, LEVEL DISPLAY - PRESSURE RAISING PUMP - WORT COOLING, 1-STAGE PLATE APPARATUS - WORT AERATION IN STAINLESS STEEL 3. FERMENTING- AND STORAGE TANKS - 5 CCTS, WITH 40 HL NET / 46 HL GROSS CONTENT, ALL TANKS 3 BAR, BUILT 1994, STANDING ON FEET, PI-ISOLATED FULLY WELDED WITH STAINLESS STEEL JACKET, WITH JACKET COOLING FROM CONE BELOW TO ½ WALL 60 LT COOLING JACKET 3 BAR, WITH MANWAY IN THE WALL, 2 OUTLETS WITH BUTTERFLY VALVES, TEMPERATURE SENSOR PT100, SPRAY HEAD, PULLED DOWN CLEANING PIPE WITH BUTTERFLY VALVE, BUNGING ARMATURE, OVER PRESSURE VALVE, SAMPLER, 2 CRANE EYELETS, 2 OF THE TANKS WITH LEVEL DISPLAY - DIGITAL TEMPERATURE CONTROL FOR 5 TANKS IN STAINLESS STEEL CONTROL CABINET - CIRCULATING PUMP IN STAINLESS STEEL, MOBILE, WITH SWITCH - MANY GOOD BEER HOSES - 6 X 10 HL BEER DISPENSING TANKS, MAKE DUO TANK, BUILT 2002, 3,0 / 4,3 BAR, COOL ABLE, ISOLATED WITH STAINLESS STEEL-JACKET FULLY WELDED, FOR INLINE-OPERATION, LYING IN RACK, SCREWED STAINLESS STEEL RACK, WITH PRESSURE ARMATURE, OUTLET ARMATURE WITH REDUCTION TO BARE CONNECTION, MANWAY WITH BIG SIGHT GLASS IN MANWAY LED - PANEL FOR 3 TYPES OF BEER 4. FILLING COMBINED BOTTLE-/KEGGING PLANT, WITH 1 CLEANING TUB, HEATED AND 1 REBUILT KEG: - BOTTLE CLEANING MACHINE FOR CLEANING OF 8 BOTTLES INSIDE AND OUTSIDE, FOR UP TO 2LT BOTTLES - BOTTLE FILLING STATION WITH HUB CYLINDER FROM BELOW, WITH SPLINTER PROTECTION - COMBINED KEG-CLEANING- AND FILLING STATION - BUILT IN CONTROL CABINET WITH SIEMENS S5 CONTROL AND OPERATING CONSOLE OP 7 5. OTHER EQUIPMENT - STEAM BOILER FOR ABOUT F280 KG/H, WITH GAS BURNER, FULLY SERVICED ON 4TH AUGUST 2014, BUILT IN 1994 - CONDENSATE TUB IN STAINLESS STEEL AT WALL AND SECOND SMALL S/S-TUB - WATER TREATMENT - STEAM REGULATION AND CONDENSATE VALVES IN CYCLE - STAINLESS STEEL CHIMNEY PLANT ABOUT 8-10M - AIR COMPRESSOR WITH WIND KETTLE, BUILT 1994 - COOLING PLANT / COLD WATER PLANT, MAKE L&R KÄLTETECHNIK, TYPE: WRK-17/SL/-5, PLANT BUILT 1997, COOLING AGENT R 407 C, WITH NEW COMPRESSOR AND NEW PLATE HEAT EXCHANGER IN 2014 FOR 10,000 € INVESTED, EVAPORATOR WITH 2 VENTILATOR OUTSIDE HANGING ON THE WALL 6.1 OTHERS - ABOUT 100 KETS, MAKE SCHÄFER, PLUS-KEGS, FLAT FITTING IN DIFFERENT SIZES, NEUTRAL - PARTY-KEGS, WITH BAVARIAN TAP, PU-COVERED IN BLACK AND WITH WOOD-OPTIC - ABOUT 800 NEUTRAL CLIP LOCK BOTTLES EACH 1 LT 6.2 DIMENSIONS THE ROOM HEIGHT IN BREWHOUSE AND CCTS IS 4.50M. THE PLANT AS ASSEMBLED ON 10.75 X 4.38M. PLEASE NOTE THAT THE BREWERY IS ONLY AVAILABLE AS A SINGLE SALE QUANTITY AVAILABLE: 1 Learn More

MODEL #7500- 84" 1X3X6 - 3 NEEDLE BARS SPACED 3" APPART - NEEDLES AT 1" C/C WE USED ONLY ONE NEEDLE BAR, OCCASIONALLY 2 SO WE REMOVED THE 3RD BAR. THE MACHINE HAS AUTO SHUT OFF UPON THREAD BREAKING WHICH COULD BE RE-CONNECTED. WE HAVE EXTRA SHUTTLE STICKS AND SHUTTLES FOR #10 BOBBINS. AS WELL WE HAVE THE MANUALS, PATTERN BOOKS, PARTS LISTS AND THREAD STAND. THE MOTOR IS 220 VOLT 3PH 60 CYCLE.SEE PLATE Learn More

SUCKER SIZING MACHINE MODEL ZTWL WIDTH 2300mm, YEAR 1984 (COMPLETE RECONDITIONED IN YEAR 2002) HEAD MACHINE MOD. WL - WORKING WIDTH 2300mm = 90 INCHES (SERIAL N.121510119). 2 SIZING BOX MOD. LC - FIRST SIZING BOX AT LOW PRESSURE (800 KG). SECOND SIZING BOX FITTED WITH BENNINGER-ZELL PRESSURE ROLLERS AT MEDIUM PRESSURE (3.000 KG) - WORKING WIDTH 1800 mm (SERIAL N.1270119). FOUR PRESSURE ROLLERS FOR EACH SIZING BOX (TWO LATERAL AND TWO UP ROLLERS). 7 DRYING CYLINDERS MOD. ZT + 2 DRYING CYLINDERS FITTED BETWEEN THE TWO SIZING BOXES FOR PRELIMINARY DRYING (SERIAL N.122510119). 1 SECTIONAL BEAM UNWINDING BREAKER. UNWINDING CONTROL MOD. AB. MOISTURE CONTROL BY MAHLO (TEXTOMETER RMS + ELOTEX DMA). DUST SUCTION APPARATUS (NOT ORIGINAL SUCKER). VOLTAGE 380 V - PREPARATION SIZING KITCHEN . MOD. TK (600 LT) - (SERIAL N.1270131) 2 TANKS (800 LT). - MAJOR SPARE PARTS (ORIGINAL SUCKER). 1 HEAD ROLLER 2700 MM 2 PRESSURE ROLLERS MOD. DYCO 1 PRESSURE ROLLER 1 LATERAL PRESSURE ROLLER 1 SIZING PUMP 15 WARPING BEAMS WORKING WIDTH 1800 MM. IN AUGUST 2002 THE ENTIRE MACHINE HAS UNDERGONE A COMPLETE INTENSIVE REVISION AND RECONDITIONED. MANY MECHANICAL AND ELECTRICAL PARTS HAVE BEEN CHANGED WITH NEW PARTS PROVIDED DIRECTLY BY SUCKER AND FITTED WITH THE ASSISTANCE OF A TECHNICIAN FROM SUCKER MULLER COMPANY. THE ENTIRE ELECTRICAL CABINET HAS BEEN CHANGED. AIR JUNCTIONS AND TRANSMISSION WERE COMPLETELY CHANGED WITH NEW ONE. Learn More