Search results for: 'horizontal sl'

REFERENCE NUMBER: J-2640
DYEING AND FINISHING PLANT FOR SALE

ITEM 001
THIES SAMPLE DYEING MACHINE
MODEL: MINISOFT SAMPLE
CAPACITY: 50 KGS
YEAR: 1999
MICROPROCESSOR CONTROLLED
VOLTAGE: 460 VOLTS, 3-PHASE, 60 Hz
SINGLE ADD TANK WITH MIXER
HEAT EXCHANGER
ALL PUMPS AND MOTORS
LOADING REEL AND FABRIC EXIT PLAITOR
QUANTITY: 1

ITEM 002
THIES DYEING MACHINE
MODEL ECOSOFT PLUS
3 PORT SPLIT/SPLIT
CAPACITY: 900 KGS
YEAR: 1999
MICROPROCESSOR CONTROLLED
VOLTAGE: 460 VOLTS, 3-PHASE, 60 Hz
SINGLE ADD TANK WITH MIXER
HEAT EXCHANGER
ALL PUMPS AND MOTORS
LOADING REEL AND FABRIC EXIT PLAITOR
QUANTITY: 1

ITEM 003
THIES DYEING MACHINE
MODEL: ECOSOFT PLUS
2 PORT SPLIT/SPLIT
CAPACITY: 600 KGS
YEAR: 1999
MICROPROCESSOR CONTROL
VOLTAGE: 460 VOLTS, 3-PHASE, 60 Hz
SINGLE ADD TANK WITH MIXER
HEAT EXCHANGER
ALL PUMPS AND MOTORS
LOADING REEL AND FABRIC EXIT PLAITOR
QUANTITY: 1

ITEM 004
THIES DYEING MACHINE
MODEL ECOSOFT PLUS
1 PORT SPLIT/SPLIT
CAPACITY: 300 KGS
YEAR: 1999
MICROPROCESSOR CONTROLLED
VOLTAGE: A460 VOLTS, 3-PHASE, 60 Hz
SINGLE ADD TANK WITH MIXER
HEAT EXCHANGER
ALL PUMPS AND MOTORS
LOADING REEL AND FABRIC EXIT PLAITOR
QUANTITY: 1

ITEM 005
GASTON COUNTY DYEING MACHINE
MODEL: AQUAFLOW
2 PORT
CAPACITY; 250 KGS
YEAR: 1987
MICROPROCESSOR CONTROLLED
VOLTAGE: 460 VOLTS, 3-PHASE, 60 Hz
SINGLE ADD TANK WITH MIXER
HEAT EXCHANGER
ALL PUMPS AND MOTORS
LOADING AND UNLOADING REEL
QUANTITY: 1

ITEM 006
THIES DYEING MACHINE
MODEL: SOFT TRD
2 TUBE
CAPACITY: 700 KGS
YEAR: 1999
MICROPROCESSOR CONTROLLED
VOLTAGE: 460 VOLTS, 3-PHASE, 60 Hz
SINGLE ADD TANK WITH MIXER
HEAT EXCHANGER
ALL PUMPS AND MOTORS
LOADING REEL AND FABRIC EXIT PLAITOR
QUANTITY: 1

ITEM 007 (also our J-2647)
LAFER OPEN WIDTH COMPACTOR MACHINE
MODEL: KSA 500 2400/2200
YEAR: 1998
LAFER TEXEN CONTROLS
VOLTAGE: 480 VOLTS, 3-PHASE, 60 Hz
COMPOSED OF:
• TENSION BAR ENTRY TO LATTICE ROLL GUIDER
• OPERATOR’S PLATFORM
• PUP TENTER WITH KNIT ENTRY, VERTICAL PIN CHAIN, WITH PLATE GUIDES, RAIL OPENING, PINNING BRUSHES, PINS ONLY, WITH SUPPORT SECTION FOR THE FABRIC IN THE CENTER, AT 10’ THERE IS A STEAMING SECTION, TOTAL LENGTH OF THE TENTER IS 30’, WITH AUTOMATIC LUBRICATION FOR THE CHAIN
• KSA 500 COMPACTOR BENCH WITH TEXEN CONTROLS
• TENSIONLESS FABRIC CONVEYOR
• PLAITOR AND FABRIC SCRAY WITH OPTICAL LOAD SENSOR
• INLINE INSPECTION BATCHER MACHINE, WITHH A BACK LIGHTED BOARD, MANUAL CUT
• SCALE TO WEIGHT THE FABRIC
QUANTITY: 1

ITEM 008 (also our J-2648)
SANTEX TUBULAR 4-ROLL EXTRACTION PAD
MODEL: SANTASTRETCH PLUS 140
YEAR: 1998
COMPOSED OF TURNTABLE, DETWISTER, TUBULAR 4-ROLL PAD WITH WET SPREADERS, PLAITOR
WITH ADDITION TANKS FOR SOFTENER
REEL FABRIC PLAITOR EXIT
VOLTAGE: 460 VOLTS, 3-PHASE, 60 Hz
QUANTITY: 1

ITEM 009
SANTEX CONVEYOR DRYER FOR OPEN WIDTH AND TUBULAR FABRIC
MODEL: SANTASHRINK 4/5240
YEAR: 1998
SANTEX CONTROLS
VOLTAGE: 460 VOLTS, 3-PHASE, 60 Hz
COMPOSED OF:
• TENSION BAR ENTRY TO LATTICE ROLL GUIDER TO
• (2) SANTEX 2-ROLL PADS, RUBBER OVER RUBBER, 102” WIDE x 12” DIAMETER, STAINLESS STEEL PAN, 10-TON PAD, SWING-AWAY PAN, TENSION BAR WITH 2 STAINLESS STEEL MIXING TANKS, 75 GALLONS EACH
• DRIVEN SCROLL ROLLS WITH EDGE GUIDE CONTROL, WIDTH 95”
• OPERATOR’S PLATFORM
• PUP TENTER WITH KNIT ENTRY 45°, YEAR 1998, VERTICAL PIN CHAIN, 30’ LONG WITH TANDEMATIC PLATE GUIDES, RAIL GUIDES, PINNING BRUSHES, GUIDE SUPPORT FOR THE FABRIC, FABRIC CONVEYOR TO ENTER BOTH TUBULAR OR OPEN WIDTH FABRIC TO
• CONVEYOR DRYER 100” WIDE, 5 ZONES, 3-PASS WITH MAXON BURNERS, 5 CIRCULATING FANS TO CONVEYOR BELT TO PLAITOR
• ALL MOTORS AND SANTEX CONTROLS AND MONITORS
QUANTITY: 1

ITEM 010
SANTEX AG TUBULAR COMPACTOR MACHINE
MODEL: SANTASPREAD 140
YEAR: 1998
SANTEX CONTROLS
VOLTAGE: 460 VOLTS, 3-PHASE, 60 Hz
COMPOSED OF:
• TENSIONS BAR ENTRY
• OPERATOR’S PLATFORM
• TENSION DEVICE
• DRIVEN SPREADER BARS
• STEAMING DEVICE
• TUBULAR COMPACTING BENCH
• FELT BLANKET ONTO THE CONVEYOR BELT
• PRECISION PLAITOR
• TABELTOP ELECTRONIC SCALE
QUANTITY: 1

ITEM 011
COMET NAPPER
MODEL: PEGSO-X4
YEAR: 1998
VOLTAGE: 480 VOLTS, 3-PHASE, 60 Hz
24 ROLLS WITH TURNING BARS FOR TUBULAR 90” WIDE
XYCOM CONTROLS
12-BAG COLLECTION SYSTEM AND PLAITOR
YEAR: 1996
QUANTITY: 1

ITEM 012
STENTEX TENTER FRAME
MODEL: STENTOTHERM 3300
YEAR: 1999
STENTEX CONTROLS
VOLTAGE: 480 VOLTS, 3-PHASE, 60 Hz
COMPOSED OF:
• TENSION ENTRY TO TEXT-STAR TYPE GUIDER TO 2 ROLL PAD
• ADDITION TANK TOP SCRAY PAD TO TEXT-STAR TYPE GUIDER
• TWO ROLL PAD R/R 10 TON
• OPERATOR’S PLATFORM
• WORKING WIDTH 1800mm
• HORIZONTAL PIN CHAIN, KNIT ENTRY
• TANDEMATIC SPLITLEVEL DECURLERS
• OVERFEED
• PINNING BRUSHES
• STEAM BOX
• RAIL GUIDERS, 20 FEET ENTRY, 8 ZONES
• 80 FEET HOUSING
• SCREEN MONITORS
• GAS FIRED, MAXON OVEPAK 408 BURNERS
• HONEYWELL CONTROLS
• 3 FEET COOLING ZONE
• 2 COOLING CANS, SELVEDGE TRIMMERS
• PLIATOR, SCRAY
• ZONE IN LINE INSPECTION BATCHER
QUANTITY: 1

ITEM 013
ZIMMER ROTARY SCREEN PRINTING MACHINE
MODEL: R92-S153
YEAR: 1993
COMPOSED OF:
• TENSION BAR SKY ENTRY
• SCRAY
• CORINO BRUSH
• CORINO PRINT GUIDER
• ZIMMER PRINTER, 8 COLOR, 86” BLANEKT
• PRINT CONVEYOR DRYER, 30’ LONG, 3-ZONE, GAS FIRED
VOLTAGE: 460 VOLTS, 3-PHASE, 60 Hz
QUANTITY: 1

ITEM 014
SAFETY SWITCH BULLET NOSE SLITTER
MODEL: CUTTING
WITH REEL FABRIC PLIATOR
VOLTAGE: 460 VOLTS, 3-PHASE, 60 Hz
QUANTITY: 1

Learn More

See all pictures: https://ibb.co/album/gpK9bF

#1 GRIBETZ MPLUS PATTERN LINK 90 TACK AND JUMP 3 BAR WITH PANEL CUTTER 4 POS CREEL

#2 GRIBETZ GI4300 TACK AND JUMP 90" 3 BAR WITH PANEL CUTTER 3 POS CREEL

# 3 EMCO 2 BAR 1X3 WITH PANEL CUTTER, YEAR 2001 (FOR PARTS)

#4 EMCO COMPUSTITCH 3 BAR
WITH JAMES CASH K-10 PANEL CUTTER

#5 GRIBETZ GI2300 90" SET UP FOR BORDERS 4 POS CREEL

#6 EMCO 9000 COMPUSTITCH 1X3X6 BUT RUNNING 1X6
WITH BORDER CUTTER JAMES CASH K-10 1997

#7 EMCO 9000 COMPUSTITCH 3 BAR 1 POSITION CREEL
WITH BORDER CUTTER JAMES CASH K-10

#8 GRIBETZ 3 BAR 92"
WITH JAMES CASH K-12

#9 TAPE EDGE WITH SINGER 300UX6 STEEL TABLE 55 X 81

#10 ATLANTA ATTACHEMENT TAPE EDGE WITH SINGER 300UX5 WITH STAINLESS STEEL TABLE 60 X 80

#11 ATLANTA ATTACHEMENT TAPE EDGE WITH SINGER 300UX5 WITH STAINLESS STEEL TABLE 60 X 80

#12 ATLANTA ATTACHEMENT TAPE EDGE WITH PFAFF 5625 WITH STAINLESS STEEL TABLE 60 X 80

#13 ATLANTA ATTACHEMENT TAPE EDGE WITH SINGER 300UX6 WITH STAINLESS STEEL TABLE 60 X 80

#14 PORTER TAPE EDGE PFAFF DISSASSEMBLED HEAD TABLE SIZE 60 X 82

#15 ATLANTA ATTACHMENT TAPE EDGE WITH PFAFF 5625 STAINLESS STEEL TABLE 59 X 79

#16 ATLANTA ATTACHEMENT TAPE EDGE WITH SINGERS 300UX5 STAINLESS STEEL TABLE 60 X 80 16"H

#17 BUILD UP TABLES MOSTLY 60 X 80 OF WHICH 15 ARE GLOBAL SYSTEMS AND 2 ARE HOME MADE

#19 ? SMALL BALER CONSOLIDATED MODEL STDS-2 36' WIDE X 18" FRONT TO BACK X 50"H

#20 SCREW UNBALER ATLANTA ATTACHMENT FOR 18 INNERSPRING CAPACITY

#21 PIQUA BALER 58 X 31 X 54" TALL 220 VOLT

#22 SCREW UNBALER WBSCO

#23 CART FOR INNERSPRING BALE

#24 GRIBETZ PANEL CUTTER ( I HAVE ALL THE INFO ALREADY)

#25 LAMINATOR GRIBETZ STRATA WITH HOT ROLL AND FELT BLANDET FOR LAMINATING WITH WEB SUBSTRATE (ROTARY HEAT PRESS) MODEL GLM011 220 VOLT , 2 POS CREEL

#26 HORIZONTAL FOAM CUTTER ESCO MODEL HTX 51-88 PU+
88" WIDE , X 118" LONG , KNIFE GRINDERS , SUCTION TABLE
TOUCH SCREEN PANEL , ELECTRICAL CONTROL PANEL
AUTOMATIC LUBRICATION BINKS MODEL 80-600 SG2 PLUS

#27 VERTICAL FOAM CUTTER MODEL EL-4
112" WIDE
OUTSIDE TABLE 73"
INSIDE TABLE 74"
FENCE 8" PLUS 16 " EXTENSION
68" THROAT
112" OVERALL HEIGHT
194" TOTAL RAIL WIDTH

#28 PORTER SERGER FLANGER MODEL 4000 WITH AIR FLOTATION TABLE
220 VOLT

#29 ATLANTA ATTACHMENT JUKI SERGER FLANGER MODEL MO6916G BELT DRIVE WITH AIR FLOTATION TABLE

#30 ATLANTA ATTACHEMENT JUKI SERGER FLANGER MODEL MO6916G BELT DRIVE WITH AIR FLOTATION TABLE

#31 SINGER LONG ARM REPAIR 25"

#32 ATLANTA ATTACHEMENT RUFFLER
MODEL 13XXMF

#33 ATLANTA ATTATCHMENT 9 NEEDLE SEWING MACHINE (MULTINEEDLE) MODEL 4000D

#34 SINGLE NEEDLE SIT DOWN MACHINES OF WHICH 3 ARE PORTER

#35 AVANCE EMBROIDERY MACHINE

#36 GALKIN "X" SEWING MACHINE FOR HANDLES
GAP5OBT-3 , JUKI MODEL LK1900CV

#37 ATLANTA ATTACHMENT DOUBLE BORDER SERGER 25" OPENING , PEGASUS HEAD
MODEL E521-130 AND EX5203-M03

#38 ATLANTA ATTACHMENT BINDER FOR HANDLE MAKING

#39 ANDERSON MULTISLITTER 10 BLADES 92" WIDE

#40 ANDERSON STAND ALONE PANEL CUTTER 103"WIDE WITH 2 EDGE SLITTERS AND ONE CROSS CUTTER
WITH 1049 HOURS ON THE CLOCK

#41 CONVEYOR FOR SEW DEPARTMENTE 34" WIDE OVER 100 FEET LONG

#42 TOYOTA FORKLIFTS 6270 LBS CAPACITY MODEL 71CCUT5 (TWO)
ONE NISSAN FORKLIFT
ONE CATERPILLAR FORKLIFT

#43 ONE GLUE STATION 4 GUNS , SABA GUNS , NOT THERE (BELONG TO SABA)

#44 240 FEET LONG CONVEYOR FEEDING MATTRESS WRAPPING DEPARTMENT

#45 TWO MERELLO WRAPPERS 20 INCH MAX HEIGHT X 88 " WIDE, YEAR 2016

#46 TECNOMAC (ITALY) MATTRESS ROLL AND PACK MACHINE MODEL TK381 YEAR 2015
400 VOLT X 50HZ X 30 KW
8 BAR AIR PRESSURE

Learn More

M-5175 OLBRICH COATING LINE FOR MANUFACTURING TARPAULIN AND BANNER PVC COATED FABRICS 3300mm

KNIFE OVER ROLL COATING
LIST OF EQUIPMENT FOR MANUFACTURING OF PVC COATED FABRICS, LINE CAN APPLY ANY TYPE OF COATING INCLUDING WATER BASED OR SOLVENT BASED AND EITHER CLEAR COAT THE FABRIC OR SATURATE COAT ANY WOVEN FABRIC , CAN ALSO DO SUNBRELLA TYPE TECHNICAL TEXTILES
FOR ONE SIDE COATING WITH KISS COATER

MANUFACTURED BY OLBRICH GMBH (ERECTED IN 2005) 3400mm (SCRIM CAN BE 3400mm WIDTH)
CAN MAKE 3350mm COATED FABRIC AND AFTER TRIMMED EDGES HAVE A FINISHED PRODUCT OF 3300mm (BEGINNING WITH A 3400mm SCRIM , THERE ARE INBUILT CUTTING BLADES FOR TRIMMING .
MANUFACTURED IN GERMANY BEGINNING 2003 AND 2004

COATING LINE
UNWINDER
PENDULUM
WEB CONTROL UNIT
PULLING STATION
PENDULUM
HEATING ROLLER (DIAMETER 570 mm)
PLATFORM
SAWING GAUGE
DOUBLE-KNIFE (DOCTOR) VERTICAL COATING MACHINE
VERTICAL DRIER
COOLING STATION WITH ROLLER LOCK
PENDULUM
SMOOTHING ROLL
MACHINE FRAME
IDLER ROLLER BRIDGE
PULLING STATION
PLATFORM
COATING MACHINE (KNIFE-OVER-ROLL)
HORIZONTAL DRIER
COOLING STATION
IDLER ROLLER BRIDGE
PLATFORM
SMOOTHING CALENDER
SUCTION HOOD
LACQUERING MACHINE (ZIMMER)
TEMPERATURE CONTROL UNIT
DRYER
ACCUMULATOR OF FABRIC
COMPUTER WITH SOFTWARE CONTROL
(SIEMENS)
ELECTRICAL CONTROL PLANT
WEIGHT-PER-UNIT-AREA
MEASURING GAUGE (2 UNITS MAHLO)-ISOTOPE NOT INCLUDED
REWINDER
FREE STANDING SLITTER-REWINDER (SEE PHOTO ATTACHED)
TRIMMING GOUGE

PERIPHERAL EQUIPMENT
LIQUIFIED GAS EQUIPMENT RH80 (RANSOME MANUFACTURING USA)
EVAPORATOR-RANSOME (USA)
CHILLER (ITALY) WITH EXPANSION TANK
BOILER ERENSAN MODEL 2000 (ISI SANAYI A.S. TURKEY) FOR HEATING OIL WITH EXPANSION TANK.
\BOILER FOR HEATING BUILDING, NOT INCLUDED
REGENERATIVE THERMAL OXIDIZER (RTO) ENVIROLOGIC USA
12 STAINLESS STEEL CONTAINERS FOR PLASTISOL VOLUME -1 M3
VACUUM DISSOLVER (SRUGO)-2 UNITS
PIPING, EXHAUST VENT PIPES (NO BUILDING HEATING PIPES )
OVERHEAD CRANE NOT INCLUDED

FLOORSPACE OCCUPIED BY THE LINE:
LENGTH 67,125mm
WIDTH 6200mm
HEIGHT 8100mm

SPEED 3 TO 30 M/MIN

HEATING SYSTEM: OIL

QUANTITY: 1 LINE

Learn More

M-5615 KUSTERS WASH RANGE- 120” FACE (3048mm)

KUSTERS WASH RANGE CONSISTING OF THE FOLLOWING:
(3) X KUSTER HORIZONTAL WASHERS, 120” FACE WIDTH, TYPE 225.74-172
(3) X KUSTER NIP SETS 120” FACE RUBBER / STAINLESS STEEL WITH 7.5-HP DC MOTORS
(1) X NASH VACUUM SYSTEM 120” SLOT, 30 HP MOTOR, TRAP AND SILENCER
(16) X MORRISON DRY CAN, 2-STACKS OF 8 CANS EACH, 120” WIDE, 7.5 HP DC MOTORS
(1) X COOPER A-FRAME WINDER 132” WIDE

QUANTITY: 1

Learn More

C-4355 FULL-AUTO WET TISSUE FOLDING MACHINE Y-12 AND FULL-AUTO WET TISSUE PACKING MACHINE Y-360, CAPACITY 40 TO 120 PCS/PACKAGE

OFFER 001
Y-360 FULL AUTOMATIC RECIPROCATING TYPE PACKING MACHINE
PRODUCTION TYPE: BABY WET TISSUE
PRODUCTION PROCESS: CONNECT TO Y-2700 FOLDING MACHINE (OR Y-12 FOLDING MACHINE) → FEEDING WIPE AUTOMATIC →CONVEYING TO PACKING MACHINE → SETTING PACKING FILM → SETTING WINDOW HOLE LABEL → CENTRAL SEALING →END SEALING AND RECIPROCATING CUT → OUTPUT FINISHED PRODUCTS.
MAINTECHNICAL PARAMETER: (SUITABLE TO PACK: 5 TO 120PCS/BAG)
PRODUCT SPEED: 55 TO 60 BAG/MIN
DIAMETER OF RAW FILM ROLL: ≤380mm
WIDTH OF RAW FILM ROLL: ≤420mm
WRAPPING MATERIAL: PP, OPP, PET, PE, AND ALL SUITABLE FILMS
SHAPES OF PACKING: PILLOW TYPE PACKAGING
PACKING LENGTH: 110 TO 300mm (TOUCH SCREEN SETABLE)
PACKING WIDTH: 80 TO 150mm (ADJUSTABLE)
HEIGHT OF PACKING: 10 TO 100mm (ADJUSTABLE)
HORIZONTAL SEALING PATTERN: RECIPROCATION HEAT SEALING
DRIVE MOTOR PATTERN: ALL SERVO DRIVE
CONTROL PATTERN: YASKAWA SIMOTION CONTROL SYSTEM
OPERATION INTERFACE: 7 INCH LCD
FILM SUPPLY SYSTEM: SERVO DRIVE
HORIZONTAL SYSTEM: SERVO DRIVE
FEEDING SYSTEM: SERVO DRIVE
LABELING SYSTEM: SERVO DRIVE
PUNCHING SYSTEM: SERVO DRIVE
HORIZONTAL PROTECTION: TORQUE OVERLOAD PROTECTION
AIR REQUIREMENTS: 0.5 TO 0.8 MPA 0.01 M3/MIN
ELECTRIC POWER REQUIREMENTS: 380VAC 50/60HZ
GENERAL POWER: 7.6KW
DIMENSION OF MACHINE: 3610 × 1150 × 1900mm
STANDARD EQUIPMENT: DATE PRINTING UNIT, PUNCHING UNIT, LABELLING UNIT, INSERTING CORNER UNIT, ELECTRICAL EYE TRACKING AUTOMATICALLY
(2) SYSTEM CHARACTER
1. THE PACKING FILM ADOPTS MECHNICAL TENSION CONTROL
2. TWO LABEL MACHINE, ONE SUB-LABELING, THE OTHER IS ANTI-COUNTERFEITING LABEL
3. PUNCHING AT THE PACKING FILM AUTOMATICALLY
4. HEATING PRINTING (DATE) DEVICE
5. FOUR BACK AND FORTH TRANSVERSE SEALING DEVICE WITHINSERT CORNER BY CYLINDER FORM
6. EIGHT SERVO MOTORS, CONTROLLING FEEDING PACKING FILM, TRANSVERSE SEALING, FEEDING TISSUE RESPECTIVELY
7. LENGTHWAYS SEALING DEVICE, CONTROL THEOPEN-CLOSEBY CYLINDER. THE SEALING WHEEL ARE APART AUTOMATICALLY WHEN THE MACHINE STOPS
8. PUNCHING, LABELING AND THE EYE MARK’S RELATIVED POSITION CAN BE SET IN THE TOUCH SCREEN.
9. AUTOMATIC FEEDING RAW MATERIAL DEVICE
10. COLOUR TOUCH SCREEN, MOTION SYSTEM CONTROL
11. MAIN MOTOR ADOPTS FAMOUS BRAND
12. MAIN MACHINE ADOPTS FRAMES FORM

OFFER 002
Y-360 FULL AUTOMATIC RECIPROCATING TYPE PACKING MACHINE
YASKAWA ELECTRICITY FROM JAPAN
ITEM NUMBER: 1
MOTION CONTROLLER
JEPMC-MP2300S-E
YASKAWA
QUANTITY: 1
ITEM NUMBER: 2
EXTENDED MODULE
R7K4FML-6-DCA32A
YASKAWA
QUANTITY: 1
ITEM NUMBER: 3
SERVO MOTOR/SERVO UNIT
SGMJV-08ADE6S /SGDV-5R5A11A
YASKAWA 750W
QUANTITY: 5
ITEM NUMBER: 4
SERVO MOTOR/SERVO UNIT
SGMGV-13ADC61 /SGDV-120A11A
YASKAWA 1.3KW
QUANTITY: 1
ITEM NUMBER: 5
SERVO MOTOR/SERVO UNIT
SGMGV-20ADA61/SGDV-180A11A
YASKAWA 1.8KW
QUANTITY: 1
ITEM NUMBER: 6
SERVO MOTOR/SERVO UNIT
SGMGV-09ADC61/SGDV-7R6A11A
YASKAWA 0.85 KW
QUANTITY: 1
ITEM NUMBER: 7
POWER CABLE + ENCODER CABLE
JZZP-CVM09/JZSP-CVP02-05
YASKAWA 850W
QUANTITY: 1
ITEM NUMBER: 8
POWER CABLE + ENCODER CABLE
JZSP-CMM00-05 JZSP-CMP00-05
YASKAWA 750W
QUANTITY: 7
ITEM NUMBER: 9
POWER CABLE + ENCODER CABLE
JZSP-CVM30-05 JZSP-CVP02-5
YASKAWA 1.3KW, 1.8KW
QUANTITY: 2
ITEM NUMBER: 10
COMMUNICATION CABLE
JEPMC-W6002-05
QUANTITY: 12
ITEM NUMBER: 11
TERMINAL RESISTANCE
JEPMC-W6022-E
QUANTITY: 2
ITEM NUMBER: 12
TOUCH PANEL
WEINVIEW
7 INCH
QUANTITY: 1
ITEM NUMBER: 13
AIR BREAK SWITCH
LG
QUANTITY: 12
ITEM NUMBER: 14
RESIDUAL CURRENT CIRCUIT BREAKER
CHINT
QUANTITY: 1
ITEM NUMBER: 15
CONTACTOR (SWITCH)
SCHNEIDER
QUANTITY: 1
ITEM NUMBER: 16
POWER SWITCH
M&W
350W
QUANTITY: 1
ITEM NUMBER: 17
SOLID STATE RELAY (SSR)
ANV
QUANTITY: 6
ITEM NUMBER: 18
TEMPERATURE CONTROLLER
DTE10P
QUANTITY: 1
ITEM NUMBER: 19
RELAY
OMRON
QUANTITY: 4

OFFER 003
Y-12 BABY WIPES FOLDING MACHINE
PRODUCTION FLOW: UNROLLING - SLITTING FABRIC INTO LANES - FOLDING - WETTING - CUTTING – PILE & COUNTING - DELIVERING
MAIN TECHNICAL PARAMETER (SUITABLE TO WET TISSUE FOR LARGE SIZE PACKING)
PRODUCT TYPE: BABY WIPES (NON CROSS FOLDING)
PRODUCT SPEED: 200 TO 270 CUTS/MIN (SET ON PLC)
SUITABLE RAW MATERIAL: AIR LAID PAPER, SPUNLACE/HOT-ROLLING NONWOVEN FABRIC
WEIGHT OF RAW MATERIAL: 40-80G/㎡
FOLDING WAY: “Z” SHAPE (POP UP AND NON-POP UP)
CUTTING UNITE:
A. DOUBLE PAPER SHELVES
B. 10 LANES OR 12 LANES, 2 ROLLS
C. RAW MATERIAL ROLL WIDTH: 900 TO 1200mm
LENGTH OF WET TISSUE: 140 TO 185mm (SET ON PLC)
FREQUENCY OF RECEIVING PAPER: 14 TO 20 TIMES/MIN (SET ON PLC)
SIZE OF RAW MATERIAL: (1000 TO 1250) × Ø1000 (mm, W×DIA)
WET TISSUE UNFOLDED SIZE: (140 TO 185) × (150 TO 200) (mm, L×W)
WET TISSUE FOLDED SIZE: (140 TO 185) × (80 TO 110) (mm, L×W)
MATERIAL SUPPLY SYSTEM: SERVO MOTOR
CUTTING SYSTEM: CONVERTER MOTOR
PILING SYSTEM: SERVO MOTOR
POWER SUPPLY: 380V 50HZ

OFFER 004
Y-12 WET TISSUE FOLDING MACHINE
MAIN PARTS
ITEM NUMBER: 1
PLC
FX3U-32T
MITSUBISHI (JAPAN)
QUANTITY: 1
ITEM NUMBER: 2
SERVO MOTOR (CONTROL THE DISTANCE OF TISSUE
ASD-B2-2023-B, ECMA-E21320RS
3.0KW DELTA (TAIWAN)
QUANTITY: 1
ITEM NUMBER: 3
SERVO MOTOR (RECEIVING TISSUE)
ASD-B2-0721-B, ECMA-C20807RS
750W DELTA (TAIWAN)
QUANTITY: 1
ITEM NUMBER: 4
TURBINE WORM REDUCER MOTOR
WPDA120-1:10-Y100L2-4
3KW NANJING UTTON (CHINA)
QUANTITY: 1
ITEM NUMBER: 5
INVERTER
SB70G4
4KW SENLON
QUANTITY: 1
ITEM NUMBER: 6
TOUCH SCREEN
7INCH
WECON
QUANTITY: 1
ITEM NUMBER: 7
AIR SWITCH
LG
QUANTITY: 1
ITEM NUMBER: 8
SWITCHING POWER SUPPLY
S-100-24
SHANGHAI MINGWEI (CHINA)
QUANTITY: 1
ITEM NUMBER: 9
INDICATOR LIGHT
SCHNEIDER
SCHNEIDER (GERMAN)
QUANTITY: 1
ITEM NUMBER: 10
EMERGENCY STOP SWITCH
SCHNEIDER
SCHNEIDER (GERMAN)
QUANTITY: 1
ITEM NUMBER: 11
POTENTIOMETER
5KΩ
QUANTITY: 1
ITEM NUMBER: 12
ROTARY ENCODER
INCREMENTAL POLE OUTPUT
KOYO (JAPAN)
QUANTITY: 1
ITEM NUMBER: 13
RELAY
OMRON
OMRON (JAPAN)
QUANTITY: 5
ITEM NUMBER: 14
PROXIMITY SWITCH
AUTONICS
AUTONICS (KOREA)
QUANTITY: 2

Learn More

REFERENCE NUMBER: M-5393 (2206YBJL1UM) L TUFTCO COATING LINE WITH FOAM MACHINE AND SLITTING OPERATION TUFTO COATING LINE FOR EMBOSSED UNITARY BACKED RUGS USING WASHABLE LATEX FOR EMBOSSED WASHABLE RUGS – SET UP FOR 12’ WIDTH AND INCLUDES THE FOLLOWING: TISI MODEL 38500 BUTT SEAMER WITH TRIMMER ON RAIL ENTRANCE J-BOX VERTICAL KEYON PIN TENTER DIRECT COAT APPLICATOR, ROLL OVER ROLL WITH TRAVERSING SYSTEM DAY TANK TO FEED LATEX TO FROTH MACHINE EASE TYPE FROTH MACHINE PRE-STEAMER BANK OF ELECTRIC INFRAREDS TWO BASKET-WEAVE EMBOSSING ROLLERS FOR 12’ WIDTHS FOUR MODULE NATURAL GAS HEATED TUFTCO CURING OVEN COOL OUT SECTION SLITTING SECTION WITH EIGHT SLITTING HEADS AND A CAMERA GUIDING SYSTEM 10 LOOP ACCUMULATOR ROLLUP ELECTRICAL CONTROL SYSTEM BY TUFTCO SPEED RANGE: LINE SPEED FOR COATING 50 OUNCE/SQUARE YARD FACE WEIGHT WITH 24 OZ/SQUARE YARD OF EMBOSSIBLE LATEX IS 35FPM, LINE SPEED FOR COATING 30 OZ/SQUARE YARD FACE WEIGHT WITH 20 OZ/SQUARE YARD OF EMBOSSIBLE LATEX IS 45 FPM. TOILET SEAT CONVERS ARE COATED WITH APPROXIMATELY 7 OZ/SQUARE YARD AT 70 FPM. NOTE THE MAXIMUM MECHANICAL SPEED OF THE COATING LINE IS 70 FPM. QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: G-3941 SAMPLE ROVING YARN-MAKING MACHINE MODEL: FDY-360F APPLICATIONS: THIS MACHINE IS MAINLY USED IN MAKING PROOF FOR WOOL TOP PLANT. IT CAN LOOSE AND CARD THE INITIALLY LOOSED WOOL, CASHMERE, AND BLENDED FABRIC MIXED WITH OIL. THEN A LAYER OF UNIFORM WOOL NET FORMS. THE SMALL WOOL TOPS ARE CUT AND SLUBBED INTO THE SAME WIDTH WITH A UNIFORM AND TIGHT BODY WHICH IS CALLED ROVING YARN. THE ROVING YARN IS USED ON SPINNING MACHINES. QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: A-1264 (01017149012R) A BALING PRESS FOAM F2500 22KW-415V/50HZ-43A QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: A-1265 (01018725212R) A BALING PRESS FOAM 3500 22KW – PRESSURE 420 KN – MODEL 43A PRESSURE 420 KN POWER 22 KW PRESS BOX 5000 X 1000 X 700 MM LOADING DOOR 3500 X 940 MM LOADING HEIGHT CA. 950 MM QUANTITY AVAILABLE: 1 Learn More

INVENTORY NUMBER: E-3641-A HORIZONTAL FOAM CUTTING MACHINE: MODEL PQ-2150 QUANTITY AVAILABLE: 1 Learn More