Search results for: 'industrial'

REFERENCE NUMBER: A-2472 INDUSTRIAL SCALE MULTI NOZZLE ELECTROSPINNING UNIT MACHINE HAS A HIGH PRODUCTION CAPACITY. IT ALSO ENABLES EASY MONITORING AND MANAGEMENT OF ALL PARAMETERS THAT ARE EFFECTIVE IN THE PRODUCTION OF NANOFIBERS. FOR THE COMMERCIAL PRODUCTION, REPEATABLE PRODUCTION OF MATERIALS IN UNIFORM AND SPECIFIC STANDARDS HAS THE HIGHEST IMPORTANCE. MACHINE IS EQUIPPED WITH 132 ELECTROSPINNING NEEDLES AND A HOMOGENIZATION SYSTEM, ALLOWING THE SURFACE TO BE UNIFORMLY AND CONTINUOUSLY AT A WIDTH OF 1 METER. BECAUSE OF ITS ADVANCED AUTOMATION SYSTEM AND THE AIR CONDITIONING EQUIPMENT, IT ENABLES CONTINUOUS PRODUCTION AT THE HIGHEST SET QUALITY EVEN UNDER CHANGING ENVIRONMENTAL CONDITIONS. SPECIFICATIONS: SPINNING-TYPE: BOTTOM-UP SPINNING CHASSIS: ELECTROSTATIC PAINTED SHEET METAL FEEDING AREA MATERIAL: PE 1000 (HIGH DENSITY, CHEMICAL RESISTANT) COLLECTOR MATERIAL: STAINLESS STEEL LED ILLUMINATION EXHAUST FAN ATMOSPHERE CONTROL (OPTIONAL) TOTAL WEIGHT: APPROX. 600 KGS DIMENSIONS: 3650 x 1950 X 1940 mm HIGH VOLTAGE POWER SUPPLY VOLTAGE RANGE: IN THE SPINNERET 0-(+)60 KV VOLTAGE PRECISION: 0.1 KV MAXIMUM CURRENT: 3 MA PUMP SYSTEM FLOW RATE: 0.01 TO 4464 ML/H (BD 60 ML SYRINGE) FLOW RATE PRECISION: 0.01 ML CONTINUES FEEDING PUMP SYSTEM FEEDING AREA NUMBER OF NOZZLES ON EACH FEEDING PIPE SET: 33 PCS NUMBER OF FEEDING PIPE SETS: 4 PCS NUMBER OF NOZZLES: 132 PCS SINGLE NOZZLE PRODUCTION: AVAILABLE FEEDING PIPE MATERIAL: ALUMINUM NOZZLE MATERIAL: ELECTRICALLY CONDUCTIVE STAINLESS STEEL NOZZLE INNER DIAMETER: STANDARD NOZZLE: 0.8 mm (DIFFERENT DIAMETERS CAN BE USED) MINIMUM REQUIRED SOLUTION FOR SINGLE NOZZLE FEEDING: 3 ML MINIMUM REQUIRED SOLUTION FOR EACH FEEDING PIPE SET: 25 ML MINIMUM REQUIRED SOLUTION FOR FULL LOADING: 150 ML SPINNING DISTANCE DISTANCE BETWEEN NOZZLE AND COLLECTOR: 50 mm TO 350 mm DISTANCE ADJUSTMENT PRECISION: 1 mm COLLECTOR ROLL TO ROLL COLLECTOR FIBER DEPOSITION WIDTH: 1000 mm SUBSTRATE WINDING SPEED: MAX. 0,1 M/ min TO MIN. 10 M/ min COATING HOMOGENEITY SYSTEM: X-AXIS STROKE OF COATING HOMOGENEITY SYSTEM: 30 mm TO 80 mm SPEED OF COATING HOMOGENEITY SYSTEM: 2 TO 20 mm/SEC UNIQUE USER INTERFACE 12” TOUCH SCREEN CONTROL PANEL WITH WELL DESIGNED USER FRIENDLY INTERFACE FULLY ABLE TO CONTROL ALL PARAMETERS SAVING & RECALLING ALL PARAMETERS VIA RECIPE & RECALL FUNCTION SAFETY FUNCTION SAFE DOOR EMERGENCY BUTTON & SAFETY RELAY HV WARNING LIGHT ELECTRICAL ISOLATED & GROUNDED CABINET OVER CURRENT PROTECTION TECHNICAL REQUIREMENTS POWER: 220 VOLTS AND 50/60 Hz @ MAX 25A GROUNDING: EXTERNAL GROUNDING LINE AREA: MIN. 5000 X 3000 mm Learn More

REFERENCE NUMBER: A-2471 INDUSTRIAL ELECTROSPINNING MACHINE A MASS PRODUCTION MACHINE OF ELECTROSPINNING. ALUMINUM FRAME STRUCTURE MAKES IT POSSIBLE FOR EXTENDING DIFFERENT FUNCTIONS. THE SPINNERET USED IS MULTI-NEEDLE ARRAYS, FROM 64 TO 384 NEEDLES ARE EQUIPPED. THE LENGTH AND WIDTH CAN BE MADE ACCORDING TO CUSTOMER'S REQUIREMENT. ROLL TO ROLL COLLECTOR AND CONTINUOUS COLLECTOR CAN BE USED BASED ON THE THICKNESS OF REQUIRED FIBER SHEET. FOR SOLUTIONS, A MULTI-CHANNEL PUMP WILL BE SUPPLIED FOR LONG TIME PRODUCTION OR NONE-STOP PRODUCTION. FEATURES: － EQUIPPED WITH BOTH POSITIVE & NEGATIVE HIGH VOLTAGE SUPPLY DEVICES － EQUIPPED WITH UNWINDING & WINDING MACHINES － CONTINUOUS ELECTROSPINNING & WINDING － ALUMINUM ALLOY FRAME STRUCTURE, MULTI-FUNCTIONS EXPANSIBLE － MULTI-NEEDLES IN ARRAYS. 16 NEEDLES X N ROWS, UP TO 384 NEEDLES － SPINNERET MOVING MACHINERY ENSURES EVEN FIBER SHEET － ONLINE AUTO-CLEAN DEVICE FOR NEEDLES － THICKNESS OF THE FIBER SHEET IS CONTROLLABLE － CE & FCC CERTIFICATE SPINNERET STANDARD：16 NEEDLES X 8 GROUPS =128 NEEDLES (THE NUMBER OF NEEDLES CAN BE ADJUSTED FREELY ACCORDING TO THE REQUIREMENTS OF USE） X-Y-Z MOTION SYSTEM － THE NOZZLE CAN BE MOVED UP AND DOWN IN THE Z DIRECTION THROUGH THE TOUCH SCREEN CONTROL TO DETERMINE THE APPROPRIATE SPINNING DISTANCE. － THE NOZZLE CAN MOVE BACK AND FORTH ALONG THE YAXIS DIRECTION OF THE TANGENT DIRECTION OF THE RECEIVING FILM TO PREPARE A UNIFORM FIBER FILM. － THE NOZZLE AUTOMATIC ONLINE CLEANING DEVICE SCANS ALONG THE X-AXIS DIRECTION. COLLECTOR － STAINLESS STEEL PLATE / MESH SERVES AS A CARRIER FOR THE FIBER MEMBRANE SUBSTRATE. － CONNECTED WITH NEGATIVE HIGH VOLTAGE. － RECEIVER BOARD WIDTH: 500 mm － SPINNING DISTANCE: 80 TO 300 mm ADJUSTABLE WINDER AND UNWINDER － AUTOMATICALLY CALCULATE THE ROLL DIAMETER OF THE LOADED MATERIAL AND CONTROL THE TENSION BETWEEN THE UNWINDING AND SPINNING SECTIONS. － CONSTANT FEEDING SPEED. THE FEEDING SPEED RANGE IS 0 TO 5000 mm / min. － ONLINE HOT PRESSING FUNCTION MODULE. AFTER THE SPINNING IS COMPLETED, BEFORE THE WINDING, A TEMPERATURE-CONTROLLED HOT PRESSING DEVICE (ROOM TEMPERATURE TO 60 ° C) IS USED FOR HOT PRESSING. (OPTIONAL THIRD LAYER MATERIAL STICKING AND REWINDING DEVICE). － CAN BE OPERATED BY TOUCH SCREEN. － DO NOT USE METAL FILM AS THE RECEIVING CARRIER. SYRINGE PUMP － 200ML X 4N CHANNEL － FLOW RATE: 0.1ML / H TO 1280 ML / H － SPECIALLY DESIGNED FOR ELECTRO-SPINNING AND RESISTANT TO HIGH VOLTAGE. HIGH VOLTAGE DEVICE －0 TO 50KV, DIGITAL DISPLAY －-50KV ~ 0 KV, DIGITAL DISPLAY －OUTPUT CURRENT: <1 MA －CONTINUOUSLY ADJUSTABLE CONTROL SYSTEM －PLC CONTROL SYSTEM, 7-INCH TOUCH SCREEN. －CONTROL THE MOVEMENT OF THE NOZZLE. －CONTROL THE NOZZLE TO MOVE UP AND DOWN. －YOU CAN SET THE MOVEMENT TIME, STROKE AND SPEED OF THE NOZZLE. －CONTROL THE FREQUENCY OF NOZZLE CLEANING. －SPINNING PROCESS PARAMETER RECORDS. ENVIRONMENTAL CONTROL SYSTEM －PROVIDE INTERFACE TO LET IN DRY AMBIENT HUMIDITY AIR. －AN EXTERNAL DEHUMIDIFIER CAN BE USED TO CONTROL THE AMBIENT HUMIDITY. THE EXTERNAL DEHUMIDIFIER NEEDS TO BE SELECTED ACCORDING TO THE SIZE OF THE WORKSHOP. THIS EQUIPMENT DOES NOT INCLUDE THIS DEHUMIDIFIER. EXHAUST SYSTEM －BOTTOM UP, AND FOUR FANS ARE PUMPED AT THE SAME TIME. －THE DISCHARGE VOLUME OF A SINGLE UNIT IS 5 TO 150 M3 / H, AND THE RATE IS ADJUSTABLE. THE COMBINED DISCHARGE VOLUME OF THE TWO EXHAUST FANS IS 10 TO 300M3 / H. THE EXTRACTOR IS DRAWN FROM THE MIDDLE. IN THIS WAY, THE HIGH-SPEED AIR VENTILATION MINIMIZES THE RELATIVE DISTURBANCE TO THE SPINNING. THE EXHAUST FAN IS A SILENT EXHAUST FAN. SAFETY －AUTOMATIC POWER-OFF DEVICE FOR OPENING THE DOOR. －RESIDUAL STATIC ELECTRICITY REMOVAL DEVICE. －EMERGENCY STOP SWITCH. －GROUND AT MULTIPLE POINTS. －ALARM DEVICE AFTER THE CONTROL PARAMETERS EXCEED THE LIMIT. CHAMBER －THE CHAMBER IS MADE OF ALUMINUM ALLOY FRAME. －THE FRONT AND SIDE WINDOWS OF THE CABINET ARE MADE OF TEMPERED GLASS. －MULTI-POINT TEMPERATURE AND HUMIDITY COLLECTION AND DISPLAY. －THE PROCESS CAN BE OBSERVED WITH THE NAKED EYE. －AIR INLET: HOT AND DRY AIR CAN BE INTRODUCED TO QUICKLY ADJUST THE HUMIDITY INSIDE THE CHAMBER. POWER SOURCE －220 VOLTS AND 50/60 Hz －TOTAL POWER: 10KW NUMBER OF NEEDLES: 128 NEEDLES (THE NUMBER OF NEEDLES CAN BE ARBITRARILY REDUCED ACCORDING TO THE SOLVENT USAGE) FLOW RATE OF EACH NEEDLE: (~ 3ML ± 50%) / HOUR TOTAL FLOW OF THE WHOLE MACHINE: ABOUT (400ML ± 50%) / HOUR SOLUTION CONCENTRATION: 10 TO 20% 8 HOURS SOLUTION PROCESSING CAPACITY: ABOUT (3L ± 50%) / 8 HOURS SOLID CONTENT (WEIGHT OF FIBER PRODUCED): (300G ± 50%) / 8 HOURS ACCORDING TO THE APPROXIMATE PRODUCTION OF FIBER MATERIAL WITH A GRAM WEIGHT OF 2GSM. WINDING AND UNWINDING SPEED: 50M / H MATERIAL WIDTH: 0.5 METERS FABRIC AREA PRODUCED PER HOUR: 25 SQUARE METERS FABRIC AREA PRODUCED IN 8 HOURS: 200 SQUARE METERS FABRIC AREA PRODUCED IN 24 HOURS: 600 SQUARE METERS BASED ON THE PRODUCTION OF FIBER MATERIAL WITH A GRAMMAGE OF 0.02G / ㎡, APPROXIMATELY: WINDING AND UNWINDING SPEED: 5000M / H MATERIAL WIDTH: 0.5 METERS FABRIC AREA PRODUCED PER HOUR: 2500 SQUARE METERS FABRIC AREA PRODUCED IN 8 HOURS: 20,000 SQUARE METERS FABRIC AREA PRODUCED IN 24 HOURS: ABOUT 60,000 SQUARE METERS Learn More

REFERENCE NUMBER: L-5861

AUTOMOTIVE TIRE CORD & INDUSTRIAL YARN TWISTING PLANT

 

PICANOL / GUNNE TIRE CORD LOOMS

 

QUANTITY: 1 PLANT

Learn More

R-7084 INDUSTRIAL COFFEE GRINDER 1000N

SIZE: 950X550X1710 (mm)
WEIGHT: 150KG
HORSEPOWER: 2HP
FUNNEL CAPACITY: 11KG
BLADES SIZE: FLAT Ø 180mm
BLADES SPEED: 575 R.P.M
GRINDING CAPACITY: 150KG/HR
PACKING SIZE: 550X950X1380 (mm)
PACKING WEIGHT: 180KG
SUPER HORSEPOWER PRECISION ADJUSTING DEVICE, CAN DO EXTRA FINE ADJUSTMENT SUITABLE FOR LONG PERIOD OF USE. GRINDING CAN BE CONDUCTED CAREFULLY SPECIFICATIONS

QUANTITY: 1

Learn More

R-7083 INDUSTRIAL COFFEE GRINDER 700N

SIZE: 770X740X1330 (mm)
WEIGHT: 120KG
HORSEPOWER: 2HP
FUNNEL CAPACITY: 5.3KG
BLADES SPEED: 1200R.P.M
GRINDING CAPACITY: 90KG/HR
PACKING SIZE: 600X380X1040 (mm)
PACKING WEIGHT: 150KG
SUPER HORSEPOWER PRECISION ADJUSTING DEVICE, CAN DO EXTRA FINE ADJUSTMENT SUITABLE FOR LONG PERIOD OF USE. GRINDING CAN BE CONDUCTED CAREFULLY SPECIFICATIONS

QUANTITY: 1

Learn More

R-7071 COFFEE ROASTING MACHINE (INDUSTRIAL) 830N

POWER CONSUMPTION: 5500 WATTS
BAKING CAPACITY: 30 KG
NUMBER OF BAKING DRUMS: FREE TO ADJUST (UP TO 90 RPM)
NUMBER OF COOLING SLOTS: 15 TURNS
HEATING METHOD: BARREL GAS OR NATURAL GAS
BAKING METHOD: SEMI-HOT AIR TYPE
BAKING TIME: GENERALLY ABOUT 15 MINUTES
PRODUCT DIMENSIONS (L X W X H): 2800 X 1500 X 2900mm
CAST IRON INNER POT
STRONG COOLING TROUGH
CAN ACCURATELY CONTROL THE GAS FLOW
BUILT-IN AUTOMATIC SAFETY IGNITION SYSTEM (OVER-TEMPERATURE. POWER OFF. WHEN THE FLAME CAN AUTOMATICALLY CUT OFF THE GAS SOURCE
BUILT-IN USB OUTPUT CABLE, CAN BE CONNECTED TO THE COMPUTER AND RECORD BAKING INFORMATION
BUILT-IN BAKING DRUM SPEED DISPLAY TABLE
12-STAGE DAMPER FINE-TUNING
OPTIONAL EGG BEANS AUTOMATIC FEEDING
MACHINE OPTIONAL COFFEE HOT BEAN SORTING (STONE AND IRON CAN BE REMOVED)

QUANTITY: 1

Learn More

R-7070 COFFEE ROASTING MACHINE (FOR INDUSTRIAL USE) 840N

POWER CONSUMPTION: 6000 WATTS
BAKING CAPACITY: 40 KG
NUMBER OF BAKING DRUMS: FREE TO ADJUST (UP TO 90 RPM)
NUMBER OF COOLING SLOTS: 15 TURNS
HEATING METHOD: GAS
BAKING METHOD: SEMI-HOT AIR TYPE
BAKING TIME: GENERALLY ABOUT 15 MINUTES
PRODUCT DIMENSIONS (L X W X H): 2950 X 1750 X 3080mm
CAST IRON INNER POT
STRONG COOLING TROUGH
CAN ACCURATELY CONTROL THE GAS FLOW
BUILT-IN AUTOMATIC SAFETY IGNITION SYSTEM (OVER-TEMPERATURE. POWER OFF. WHEN THE FLAME CAN AUTOMATICALLY CUT OFF THE GAS SOURCE
BUILT-IN USB OUTPUT CABLE, CAN BE CONNECTED TO THE COMPUTER AND RECORD BAKING INFORMATION
BUILT-IN BAKING DRUM SPEED DISPLAY TABLE
12-STAGE DAMPER FINE-TUNING
OPTIONAL EGG BEANS AUTOMATIC FEEDING
MACHINE OPTIONAL COFFEE HOT BEAN SORTING (STONE AND IRON CAN BE REMOVED)

QUANTITY: 1

Learn More

R-7069 COFFEE ROASTING MACHINE (FOR INDUSTRIAL USE) 820N

POWER CONSUMPTION: 5000 WATTS
BAKING CAPACITY: 20 KG
NUMBER OF BAKING DRUMS: FREE TO ADJUST (UP TO 90 RPM)
NUMBER OF COOLING SLOTS: 15 TURNS
HEATING METHOD: BARREL GAS OR NATURAL GAS
BAKING METHOD: SEMI-HOT AIR TYPE
BAKING TIME: GENERALLY ABOUT 15 MINUTES
PRODUCT DIMENSIONS (L X W X H): 2310 X 1180 X 3070mm
CAST IRON INNER POT
STRONG COOLING TROUGH
CAN ACCURATELY CONTROL THE GAS FLOW
BUILT-IN AUTOMATIC SAFETY IGNITION SYSTEM (OVER-TEMPERATURE. POWER OFF. WHEN THE FLAME CAN AUTOMATICALLY CUT OFF THE GAS SOURCE
BUILT-IN USB OUTPUT CABLE, CAN BE CONNECTED TO THE COMPUTER AND RECORD BAKING INFORMATION
BUILT-IN BAKING DRUM SPEED DISPLAY TABLE
12-STAGE DAMPER FINE-TUNING
OPTIONAL EGG BEANS AUTOMATIC FEEDING
MACHINE OPTIONAL COFFEE HOT BEAN SORTING (STONE AND IRON CAN BE REMOVED)

QUANTITY: 1

Learn More

R-7068 COFFEE ROASTING MACHINE (INDUSTRIAL) 810N

1 PS PACKAGE VOLUME (L X W X H): 2160 X 1650 X 2100mm
1 PS PACKAGE TOTAL WEIGHT: 750 KG
POWER CONSUMPTION: 1800 WATTS
BAKING CAPACITY: 12 KG
NUMBER OF BAKING DRUMS: FREE TO ADJUST (UP TO 120 RPM)
NUMBER OF COOLING SLOTS: 15 TURNS
HEATING METHOD: BARREL GAS (LPG) OR NATURAL GAS (LNG)
BAKING METHOD: SEMI-HOT AIR TYPE
BAKING TIME: GENERALLY ABOUT 15 MINUTES
PRODUCT DIMENSIONS (L X W X H): 2600 X 1000 X 2300mm
PRODUCT WEIGHT: ABOUT 650 KILOGRAMS
CAST IRON INNER POT
STRONG COOLING TROUGH
CAN ACCURATELY CONTROL THE GAS FLOW
BUILT-IN AUTOMATIC SAFETY IGNITION SYSTEM (OVER-TEMPERATURE. POWER OFF. WHEN THE FLAME CAN AUTOMATICALLY CUT OFF THE GAS SOURCE
BUILT-IN USB OUTPUT CABLE, CAN BE CONNECTED TO THE COMPUTER AND RECORD BAKING INFORMATION
BUILT-IN BAKING DRUM SPEED DISPLAY TABLE
15-STAGE DAMPER FINE-TUNING

QUANTITY: 1

Learn More

R-7066 COFFEE BAKING MACHINE (INDUSTRIAL) 803N

1 PS PACKAGE VOLUME (L X W X H): 1240 X 1180 X 1180mm
1 PS PACKAGE TOTAL WEIGHT: 370 KG
POWER CONSUMPTION: 450 WATTS
BAKING CAPACITY: 4 KG
NUMBER OF BAKING DRUMS: FREE TO ADJUST (UP TO 100 RPM)
NUMBER OF COOLING SLOTS: 15 TURNS
HEATING METHOD: BARREL GAS (LPG) OR NATURAL GAS (LNG)
BAKING METHOD: SEMI-HOT AIR TYPE
BAKING TIME: GENERALLY ABOUT 15 MINUTES
PRODUCT DIMENSIONS (L X W X H): 1700 X 600 X 1700mm
PRODUCT WEIGHT: ABOUT 240 KG
CAST IRON INNER POT
STRONG COOLING TROUGH
CAN ACCURATELY CONTROL THE GAS FLOW
BUILT-IN AUTOMATIC SAFETY IGNITION SYSTEM (OVER-TEMPERATURE. POWER OFF. WHEN THE FLAME CAN AUTOMATICALLY CUT OFF THE GAS SOURCE
BUILT-IN USB OUTPUT CABLE, CAN BE CONNECTED TO THE COMPUTER AND RECORD BAKING INFORMATION
BUILT-IN BAKING DRUM SPEED DISPLAY TABLE
13-STAGE DAMPER FINE-TUNING

QUANTITY: 1

Learn More