Search results for: 'rolls'[0]'

TT-6817 ROLLS-ROYCE NATURAL GAS GENERATOR SET, 3.75 MW, 60 Hz, YEAR 2002 1. ROLLS-ROYCE NATURAL GAS GENERATOR SET 2. 3.75 MW 3. MODEL: KVGB-18G3 QUANTITY: 1 Learn More

TT-4054 BETA PADDER MANGLE 3 ROLLS INOX, ROLL WIDTH 2100mm QUANTITY: 1 Learn More

T-7072 COMPLETE DENIM LINES, CAPACITY 1 MILLION METERS PER MONTH COMPLETE INSTALLATION FOR THE PRODUCTION OF 1 MILLION METERS PER MONTH OF DENIM QUANTITY: 2 LINES Learn More

TT-2241 SIEMENS AND ROLLS ROYCE GAS POWER PLANT, 75 MW, YEAR 2018 QUANTITY: 1 Learn More

TT-2154 TRUTZSCHLER, SPINNBAU, RAMISCH KLEINEWEFERS, EDELMAN THERMOBOND LINE, YEAR 1986 THE LINE COMPOSED BY: 1. TRUTZSCHLER MODEL MWS 1000, FIBRE OPENER WITH WEIGHING DEVICE (2 PIECES) 2. TRUTZSCHLER MODEL FBM 1000, FIBRE BLENDER WITH CONVEYOR BELT 3. TEMAFA MODEL FFO, FINE OPENER 4. TRUTZSCHLER MODEL FBK 2500, EXACTAFEED CHUTE FEED 5. SPINNBAU CARD DOUBLE DOFFER MODEL 2000 6. RAMISCH KLEINEWEFERS CALENDER TYPE: 2 ROLL CALENDER 7. AURA THERMAL OIL BOILER (ELECTRIC) MODEL E 10 – 220 8. EDELMANN SLITTING - WINDING MACHINE, MODEL 620 – 08 LINES ARE WORKING POLYPROPYLENE POLYESTER POLYAMID, VISCOSE COTTON COVERSTOK, HIGYENE NONWOVENS, DRAPES GOWNS, FILTERS, DRAY WIPES. THERMOBOND LINE: POLYPROPYLENE POLYESTER POLYAMID, AND MIXTURES WITH VISCOSE OR COTTON (UP TO 30% COTTON), COVERSTOK, HIGYENE NONWOVEN FOR PADS, SLIPS, DRAPES GOWNS, FILTERS, WET WIPES, AUTOMOTIVE INDUSTRY, UPHOLSTERY. PES OR PET 30GSM AT 80 M/MIN 230 °C WIDTH 2000mm = PRODUCING ABOUT 10,000 SQUARE METERS PER HOUR, UTILIZING 320 KG OF POLYESTER FIBERS PER HOUR. CAPACITY OF LINE 120000mm/MIN KG PER HOUR OUTPUT IN KG/HR DEPEND ON GSM: G/SQUARE METER SPEED, ROLERS TEMPERATURES: EG: 44GSM PRODUCTION 250KG/H TO INCREASE PRODUCTION MORE AND MORE. IT DEPENDS ON THE TYPE OF PROCESSING MIN AND MAXIMUM GSM 16 TO 50 GSM MAXIMUM OUTPUT WIDTH OF THE FINISHED PRODUCT 2200mm HOW IS THE HEATING OF CALENDERING DONE: ELECTRIC POW Learn More

TT-2113 KROENERT TYPE PAK 600 WAXER / LAMINATOR / COATER, WORKING WIDTH 500 TO 1050mm ITEM 001 KROENERT TYPE PAK 600 WAXER / LAMINATOR / COATER IN 1980 STARTED PRODUCTION TEST POSSIBLE – IMMEDIATELY FREE FOR SALE ITEM 002 STAMPING AND EMBOSSING MACHINE HEIDEMANN ITEM 003 WAX-LAMINATOR KROENERT-PACK 850 THE MACHINE CAN BE DISMANTLED AS FROM NOW. Learn More

TT-1641 COMPLETE LINE FOR PROCESSING NON-WOVEN FABRIC, YEAR 1986 – 2200mm TRUTZSCHLER, SPINNBAU, RAMISCH KLEINEWEFERS, EDELMAN THERMOBOND LINE INTENDED USE: NONWOVEN PRODUCTION FROM ALL SYNTHETIC FIBRES AND MIXTURES WITH SYNTETIC FIBRES WHERE FIBRES SOFTENING POINT IS BELOW 250°C ROLLS WIDTH: 30mm TO MAX 2200mm ROLLS DIAMETER MAX 1000mm GRAMMAGES: 16GSM TO MAX 50GSM (DUPLEX 70GSM) EXIT TRIMMED WIDTH: 2000mm Learn More

REFERENCE NUMBER: T-6932 SILOS FIBERS FEEDING, WORKING WIDTH 3000mm, YEAR 1986 TO 1991 ITEM 001 SILOS FIBERS FEEDING 1 CARDING LINE OCTIR YEAR 1991 COMPOSE OF 4 SET OF CARD DRUMS INCLUDING WEB FIBERS TRAVERSE EXIT SEPARATORS DEVICE INTO TOTAL 272 ENDS OF 16 WOOD-ROLLS OF 17 ENDS EACH WORKING WIDTH 3000mm QUANTITY: 1 ITEM 002 SILOS FIBERS FEEDING 1 CARDING LINE OCTIR YEAR 1986 COMPOSE OF 3 SET OF CARD DRUMS INCLUDING WEB FIBERS TRAVERSE EXIT SEPARATORS DEVICE INTO TOTAL 192 ENDS OF 8 WOOD-ROLLS OF 24 ENDS EACH WORKING WIDTH 3000mm QUANTITY: 1 Learn More

REFERENCE NUMBER: J-2640
DYEING AND FINISHING PLANT FOR SALE

ITEM 001
THIES SAMPLE DYEING MACHINE
MODEL: MINISOFT SAMPLE
CAPACITY: 50 KGS
YEAR: 1999
MICROPROCESSOR CONTROLLED
VOLTAGE: 460 VOLTS, 3-PHASE, 60 Hz
SINGLE ADD TANK WITH MIXER
HEAT EXCHANGER
ALL PUMPS AND MOTORS
LOADING REEL AND FABRIC EXIT PLAITOR
QUANTITY: 1

ITEM 002
THIES DYEING MACHINE
MODEL ECOSOFT PLUS
3 PORT SPLIT/SPLIT
CAPACITY: 900 KGS
YEAR: 1999
MICROPROCESSOR CONTROLLED
VOLTAGE: 460 VOLTS, 3-PHASE, 60 Hz
SINGLE ADD TANK WITH MIXER
HEAT EXCHANGER
ALL PUMPS AND MOTORS
LOADING REEL AND FABRIC EXIT PLAITOR
QUANTITY: 1

ITEM 003
THIES DYEING MACHINE
MODEL: ECOSOFT PLUS
2 PORT SPLIT/SPLIT
CAPACITY: 600 KGS
YEAR: 1999
MICROPROCESSOR CONTROL
VOLTAGE: 460 VOLTS, 3-PHASE, 60 Hz
SINGLE ADD TANK WITH MIXER
HEAT EXCHANGER
ALL PUMPS AND MOTORS
LOADING REEL AND FABRIC EXIT PLAITOR
QUANTITY: 1

ITEM 004
THIES DYEING MACHINE
MODEL ECOSOFT PLUS
1 PORT SPLIT/SPLIT
CAPACITY: 300 KGS
YEAR: 1999
MICROPROCESSOR CONTROLLED
VOLTAGE: A460 VOLTS, 3-PHASE, 60 Hz
SINGLE ADD TANK WITH MIXER
HEAT EXCHANGER
ALL PUMPS AND MOTORS
LOADING REEL AND FABRIC EXIT PLAITOR
QUANTITY: 1

ITEM 005
GASTON COUNTY DYEING MACHINE
MODEL: AQUAFLOW
2 PORT
CAPACITY; 250 KGS
YEAR: 1987
MICROPROCESSOR CONTROLLED
VOLTAGE: 460 VOLTS, 3-PHASE, 60 Hz
SINGLE ADD TANK WITH MIXER
HEAT EXCHANGER
ALL PUMPS AND MOTORS
LOADING AND UNLOADING REEL
QUANTITY: 1

ITEM 006
THIES DYEING MACHINE
MODEL: SOFT TRD
2 TUBE
CAPACITY: 700 KGS
YEAR: 1999
MICROPROCESSOR CONTROLLED
VOLTAGE: 460 VOLTS, 3-PHASE, 60 Hz
SINGLE ADD TANK WITH MIXER
HEAT EXCHANGER
ALL PUMPS AND MOTORS
LOADING REEL AND FABRIC EXIT PLAITOR
QUANTITY: 1

ITEM 007 (also our J-2647)
LAFER OPEN WIDTH COMPACTOR MACHINE
MODEL: KSA 500 2400/2200
YEAR: 1998
LAFER TEXEN CONTROLS
VOLTAGE: 480 VOLTS, 3-PHASE, 60 Hz
COMPOSED OF:
• TENSION BAR ENTRY TO LATTICE ROLL GUIDER
• OPERATOR’S PLATFORM
• PUP TENTER WITH KNIT ENTRY, VERTICAL PIN CHAIN, WITH PLATE GUIDES, RAIL OPENING, PINNING BRUSHES, PINS ONLY, WITH SUPPORT SECTION FOR THE FABRIC IN THE CENTER, AT 10’ THERE IS A STEAMING SECTION, TOTAL LENGTH OF THE TENTER IS 30’, WITH AUTOMATIC LUBRICATION FOR THE CHAIN
• KSA 500 COMPACTOR BENCH WITH TEXEN CONTROLS
• TENSIONLESS FABRIC CONVEYOR
• PLAITOR AND FABRIC SCRAY WITH OPTICAL LOAD SENSOR
• INLINE INSPECTION BATCHER MACHINE, WITHH A BACK LIGHTED BOARD, MANUAL CUT
• SCALE TO WEIGHT THE FABRIC
QUANTITY: 1

ITEM 008 (also our J-2648)
SANTEX TUBULAR 4-ROLL EXTRACTION PAD
MODEL: SANTASTRETCH PLUS 140
YEAR: 1998
COMPOSED OF TURNTABLE, DETWISTER, TUBULAR 4-ROLL PAD WITH WET SPREADERS, PLAITOR
WITH ADDITION TANKS FOR SOFTENER
REEL FABRIC PLAITOR EXIT
VOLTAGE: 460 VOLTS, 3-PHASE, 60 Hz
QUANTITY: 1

ITEM 009
SANTEX CONVEYOR DRYER FOR OPEN WIDTH AND TUBULAR FABRIC
MODEL: SANTASHRINK 4/5240
YEAR: 1998
SANTEX CONTROLS
VOLTAGE: 460 VOLTS, 3-PHASE, 60 Hz
COMPOSED OF:
• TENSION BAR ENTRY TO LATTICE ROLL GUIDER TO
• (2) SANTEX 2-ROLL PADS, RUBBER OVER RUBBER, 102” WIDE x 12” DIAMETER, STAINLESS STEEL PAN, 10-TON PAD, SWING-AWAY PAN, TENSION BAR WITH 2 STAINLESS STEEL MIXING TANKS, 75 GALLONS EACH
• DRIVEN SCROLL ROLLS WITH EDGE GUIDE CONTROL, WIDTH 95”
• OPERATOR’S PLATFORM
• PUP TENTER WITH KNIT ENTRY 45°, YEAR 1998, VERTICAL PIN CHAIN, 30’ LONG WITH TANDEMATIC PLATE GUIDES, RAIL GUIDES, PINNING BRUSHES, GUIDE SUPPORT FOR THE FABRIC, FABRIC CONVEYOR TO ENTER BOTH TUBULAR OR OPEN WIDTH FABRIC TO
• CONVEYOR DRYER 100” WIDE, 5 ZONES, 3-PASS WITH MAXON BURNERS, 5 CIRCULATING FANS TO CONVEYOR BELT TO PLAITOR
• ALL MOTORS AND SANTEX CONTROLS AND MONITORS
QUANTITY: 1

ITEM 010
SANTEX AG TUBULAR COMPACTOR MACHINE
MODEL: SANTASPREAD 140
YEAR: 1998
SANTEX CONTROLS
VOLTAGE: 460 VOLTS, 3-PHASE, 60 Hz
COMPOSED OF:
• TENSIONS BAR ENTRY
• OPERATOR’S PLATFORM
• TENSION DEVICE
• DRIVEN SPREADER BARS
• STEAMING DEVICE
• TUBULAR COMPACTING BENCH
• FELT BLANKET ONTO THE CONVEYOR BELT
• PRECISION PLAITOR
• TABELTOP ELECTRONIC SCALE
QUANTITY: 1

ITEM 011
COMET NAPPER
MODEL: PEGSO-X4
YEAR: 1998
VOLTAGE: 480 VOLTS, 3-PHASE, 60 Hz
24 ROLLS WITH TURNING BARS FOR TUBULAR 90” WIDE
XYCOM CONTROLS
12-BAG COLLECTION SYSTEM AND PLAITOR
YEAR: 1996
QUANTITY: 1

ITEM 012
STENTEX TENTER FRAME
MODEL: STENTOTHERM 3300
YEAR: 1999
STENTEX CONTROLS
VOLTAGE: 480 VOLTS, 3-PHASE, 60 Hz
COMPOSED OF:
• TENSION ENTRY TO TEXT-STAR TYPE GUIDER TO 2 ROLL PAD
• ADDITION TANK TOP SCRAY PAD TO TEXT-STAR TYPE GUIDER
• TWO ROLL PAD R/R 10 TON
• OPERATOR’S PLATFORM
• WORKING WIDTH 1800mm
• HORIZONTAL PIN CHAIN, KNIT ENTRY
• TANDEMATIC SPLITLEVEL DECURLERS
• OVERFEED
• PINNING BRUSHES
• STEAM BOX
• RAIL GUIDERS, 20 FEET ENTRY, 8 ZONES
• 80 FEET HOUSING
• SCREEN MONITORS
• GAS FIRED, MAXON OVEPAK 408 BURNERS
• HONEYWELL CONTROLS
• 3 FEET COOLING ZONE
• 2 COOLING CANS, SELVEDGE TRIMMERS
• PLIATOR, SCRAY
• ZONE IN LINE INSPECTION BATCHER
QUANTITY: 1

ITEM 013
ZIMMER ROTARY SCREEN PRINTING MACHINE
MODEL: R92-S153
YEAR: 1993
COMPOSED OF:
• TENSION BAR SKY ENTRY
• SCRAY
• CORINO BRUSH
• CORINO PRINT GUIDER
• ZIMMER PRINTER, 8 COLOR, 86” BLANEKT
• PRINT CONVEYOR DRYER, 30’ LONG, 3-ZONE, GAS FIRED
VOLTAGE: 460 VOLTS, 3-PHASE, 60 Hz
QUANTITY: 1

ITEM 014
SAFETY SWITCH BULLET NOSE SLITTER
MODEL: CUTTING
WITH REEL FABRIC PLIATOR
VOLTAGE: 460 VOLTS, 3-PHASE, 60 Hz
QUANTITY: 1

Learn More

REFERENCE NUMBER: R-7247
NOMINAL CAPACITY: 20 TO 50 TPD
QUANTITY: 1

Learn More