Search results for: 'tan'me'

TT-7617 BABCOCK CHAIN MERCERIZING LINE, WORKING WIDTH 1800mm, YEAR 1999 1. BABCOCK CHAIN MERCERIZING LINE 2. WITH 12 TANKS 3. MANUFACTURER OF THE WASHING TANKS: BABCOCK 4. MANUFACTURER OF THE CHAIN MERCERIZING LINE: COMERIO QUANTITY: 1 Learn More

TT-7585 SIEMENS SST-300 STEAM TURBINE - NEW, YEAR 2021, 50 Hz 1. BRAND NEW STEAM TURBINE SIEMENS SST-300 - IN FACTORY 2. PACKING FROM THE YEAR 2021 3. THIS TURBINE HAS NEVER BEEN INSTALLED AND AVAILABLE 4. WITH ALL ITS EQUIPMENT AND ACCESSORIES 5. STORED IN WAREHOUSE SECURELY, IN GOOD ENVIRONMENT. Learn More

YY-2354 DYNACHAMP HIGH FLOW HOT MELT BEAD GUN HIGHEST QUALITY INDUSTRIAL HIGH FLOW HOT MELT HANDGUN FOR THE PRECISE APPLICATION OF HOT MELT ADHESIVE. THIS INDUSTRIAL GLUE GUN IS USED WITH THE N SERIES AND S SERIES HOT MELT TANKS AND REQUIRE A FLEXIBLE HEATED HOSE. QUANTITY: 1 Learn More

REFERENCE NUMBER: M-5393 (2206YBJL1UM) L TUFTCO COATING LINE WITH FOAM MACHINE AND SLITTING OPERATION TUFTO COATING LINE FOR EMBOSSED UNITARY BACKED RUGS USING WASHABLE LATEX FOR EMBOSSED WASHABLE RUGS – SET UP FOR 12’ WIDTH AND INCLUDES THE FOLLOWING: TISI MODEL 38500 BUTT SEAMER WITH TRIMMER ON RAIL ENTRANCE J-BOX VERTICAL KEYON PIN TENTER DIRECT COAT APPLICATOR, ROLL OVER ROLL WITH TRAVERSING SYSTEM DAY TANK TO FEED LATEX TO FROTH MACHINE EASE TYPE FROTH MACHINE PRE-STEAMER BANK OF ELECTRIC INFRAREDS TWO BASKET-WEAVE EMBOSSING ROLLERS FOR 12’ WIDTHS FOUR MODULE NATURAL GAS HEATED TUFTCO CURING OVEN COOL OUT SECTION SLITTING SECTION WITH EIGHT SLITTING HEADS AND A CAMERA GUIDING SYSTEM 10 LOOP ACCUMULATOR ROLLUP ELECTRICAL CONTROL SYSTEM BY TUFTCO SPEED RANGE: LINE SPEED FOR COATING 50 OUNCE/SQUARE YARD FACE WEIGHT WITH 24 OZ/SQUARE YARD OF EMBOSSIBLE LATEX IS 35FPM, LINE SPEED FOR COATING 30 OZ/SQUARE YARD FACE WEIGHT WITH 20 OZ/SQUARE YARD OF EMBOSSIBLE LATEX IS 45 FPM. TOILET SEAT CONVERS ARE COATED WITH APPROXIMATELY 7 OZ/SQUARE YARD AT 70 FPM. NOTE THE MAXIMUM MECHANICAL SPEED OF THE COATING LINE IS 70 FPM. QUANTITY AVAILABLE: 1 Learn More

TT-1431 SLOT DIE COATING MACHINE, COATING WIDTH 1600mm PARAMETERS 1. COATING METHOD: SLOT DIE COATING 2. MAX. COATING WIDTH: 1600mm 3. COATING WEIGHT: 50 TO 300 GSM 4. UNIFORMITY: ≤10% 5. MECHANICAL SPEED: 1 TO 20 METERS PER MINUTE 6. COATING SPEED: THE COATING SPEED IS DETERMINED ACCORDING TO THE COATING WEIGHT, QUANTITY, ADHESIVE VISCOSITY, THE TEMPERATURE AND THE SUBSTRATE. 7. ROLLER WIDTH: 1750mm (ACTUAL WORKING WIDTH OF PAPER ROLL IS 1600mm) 8. MAX. UNWINDING DIAMETER: 1250mm 9. MAX. REWINDING DIAMETER: 950mm 10. UNWINDING TENSION: ≤600N 11. FILM UNWINDING TENSION: ≤200N 12. WINDING TENSION: ≤600N 13. GLUE MELTING SPEED: 310 KG/HOUR 14. GLUE INPUT HOSE: TEFLON TUBE 15. GLUE MELTING TEMPERATURE: ABOUT 260°C MAXIMUM 16. MECHANICAL POWER: ABOUT 40 KW 17. INSTALLED POWER: ABOUT 110 KW 18. POWER SUPPLY: ABOUT 440 VOLTS, 60Hz 19. AIR SOURCE: 0.6 TO 0.8 MPA 20. WATER SOURCE: 0.15 TO 0.4 MPA CIRCULATING COOLING WATER 21. DIMENSIONS: 9000 (LENGTH) X 6600 (WIDTH) X 2300mm 22. THE AMOUNT OF GLUE AND THE GLUE SPEED ARE TRACKED SYNCHRONOUSLY, AND CAN ALSO BE ADJUSTED INDEPENDENTLY QUANTITY: 1 Learn More

TT-5705 SULZER L5300 AND L5400 LOOMS, WIDTH 1900mm, YEAR 2000 TO 2002, DOBBY ITEM 001 BRAND: SULZER MODEL: L5300 WIDTH: 1900mm YEAR OF MANUFACTURE: 2002 QUANTITY: 10 ITEM 002 BRAND: SULZER MODEL: L5300 WIDTH: 1900mm YEAR OF MANUFACTURE: 2001 QUANTITY: 8 ITEM 003 BRAND: SULZER MODEL: L5400 WIDTH: 1900mm YEAR OF MANUFACTURE: 2003 QUANTITY: 2 NOTE: ALL LOOMS HAVE A TANGENTIAL WINDER Learn More

YY-2329 DS SIMPLICITY HOT MELT UNITS THE DS 4, 8, 16 HOT MELT UNITS ARE SIMPLE, INDUSTRIAL HOT MELT TANKS WITH CONSTANT PRESSURE PISTON PUMPS, PRECISION CONTROLS, AND THOROUGH GLUE FILTRATION. QUANTITY: 1 Learn More

TT-1984 APPLE JUICE FACILITY, 90,000 LBS/HR IN, 15,500 LBS/HR OUT ITEM 001 4-EFFECT EVAPORATOR / CONCENTRATOR, MANUFACTURED BY APV, PREVIOUSLY RUNNING DEPECTINIZED FRUIT JUICE AT RATE OF 170 GPM-IN AT 3-4 BIX, 20 GPM-OUT AT 70 BRIX (90,000 LBS/HR IN, 15,500 LBS/HR OUT). STEAM CONSUMPTION OF 16,000 POUNDS PER HOUR AT 125 PSI. TOWER WATER RUNNING 1,650 GPM AT 50 DEG F. INCLUDES MATCHED CAPACITY UHT PASTEURIZING SYSTEM. EFFECTS CONSIST OF 1A/1B, 2, 3A/3B, 4A, 4B. COMPLETE SYSTEM WITH PLATE HEAT EXCHANGERS, TANKS, PUMPS, AND CONTROLS. ITEM 002 CROSSFLOW MICROFILTRATION SYSTEM, MANUFACTURED BY TECHSEP, WITH CARBOSEP CARBON MEMBRANES. HIGH SIDE AND LOW SIDE EACH RATED FOR 40 GPM FOR A TOTAL OF 80 GPM. CARBOSEP MEMBRANES FEATURE SINTERED CARBON MEMBRANE SUPPORT, METALLIC OXIDE MEMBRANE LAYER, MEASURES 1200MM/47.25 LONG X 10 MM/0.4” OD, 6 MM/0.23” ID, RATED FOR 40 BAR/580 PSI BURSTING PRESSURE, 15 BAR/217 PSI SERVICE PRESSURE, 0 TO 14 SERVICE PH, MICROFILTRATION AT 0.14 MICRONS. STAINLESS STEEL FILTRATION HOUSING MEASURES 9” DIAMETER X 4’ LONG. (3) SKIDS, EACH DRIVEN BY 60 HP GOULDS XLT-X CENTRIFUGAL PUMP. INCLUDES (2) STAINLESS STEEL CARTS OF EXTRA PARTS AND THOUSANDS OF UNUSED SPARE FILTRATION TUBE MEMBRANES STILL IN BOXES. ITEM 003 (2) 10,000 GALLON STAINLESS STEEL TANKS, MEASURES 8’ DIAMETER X 15’ HIGH, SINGLE WALL CONSTRUCTION, INCLUDES 5 HP SIDE AGITATOR MANUFACTURED BY MIXMOR, DRIVEN BY 5 HP MOTOR. FEATURES 4” CENTER BOTTOM DISCHARGE, MANWAY OPENING, AND 7.5 HP TRANSFER PUMP. ITEM 004 GRANULAR DECOLORING CARBON FILTRATION SYSTEM, LAST USED TO PROCESS FRUIT JUICE AT RATE OF 150 GPM. CONSISTS OF (2) FILTRATION COLUMNS, EACH MEASURING 3’ DIAMETER X 16’ HIGH STRAIGHT SIDE, APPROXIMATELY 850 GALLONS WITH DISH TOP AND BOTTOM; 4,000 GALLON STAINLESS STEEL SINGLE WALL “CAUSTIC” TANK WHICH MEASURES 8’ DIAMETER X 10’ HIGH STRAIGHT SIDE, 2,000 GALLON STAINLESS STEEL TANK MEASURING 6’ DIAMETER X 10’ HIGH WITH DISH BOTTOM AND 3” OUTLET; SECONDARY FILTER SKID WITH (2) COLUMNS, EACH MEASURING 8” DIAMETER X 3’ HIGH; 200 GALLON STAINLESS STEEL CIP TANK MEASURING 40” DIAMETER X 32” HIGH WITH DISH TOP; AND 10 HP FRISTAM PUMP. ITEM 005 ALFA LAVAL / DE LAVAL AUTOMATIC DESLUDGING DISC CENTRIFUGE, MODEL BRPX 417 SEV 31CCL – 60/88 – 1008 – 13, MANUFACTURING NUMBER 2982935, RATED FOR MAX SPEED OF 3980 R/M. DRIVEN BY 50 HP, INCLUDES 10 HP TRANSFER PUMP, ALLEN BRADLEY DIGITAL CONTROLS. ITEM 006 WESTFALIA AUTOMATIC DESLUDING DISC CENTRIFUGE, MODEL SB80-06-177, SERIAL # 1668 988, MANUFACTURED IN 1980, RATED FOR MAX BOWL RPM OF 4430, 1.1 KG/DM3 OF HEAVY LIQUID, 1.3 KG/DM3 OF SLOIDS. DRIVEN BY 75 HP TOSHIBA MOTOR, INCLUDES CONTROL PANEL WITH ALLEN BRADLEY TOUCHSCREEN CONTROLS. Learn More

TT-7861 TAURUS 65 GAS TURBINE GENERATOR SET, YEAR 2022, WITH ONLY 300 HOURS 1. WITH ONLY 300 HOURS 2. TAURUS 65 3. 300 HOURS 4. YEAR 2022 5. THE DISMANTLED AND READY FOR DELIVERY 6. TAURUS 65 GAS TURBINE 7. INDUSTRIAL, SINGLE-SHAFT 8. 13 STAGE COMPRESSOR 9. VARIABLE INLET GUIDE VANES AND STATORS QUANTITY: 1 Learn More

TT-7414 FIRE EXTINGUISHER DIESEL PUMP TC12F, 750 USGPM @ 125 PSI, 60Hz QUANTITY: 1 Learn More