Search results for: 'Compa'

PS-HF AUTOMATIC POCKET SPRING MACHINE COMPACT DESIGN/ELECTRO-MECHANICAL CONVEYOR ARE CONTROLLED BY SERVO/ACCURATE MOTIONS INTELLIGENT SENSORS CAN CHECK MALFUNCTIONS ALL THE TIME/DISPLAY CORRESPONDING ALARM ON THE HIM DULY/ONE OPERATOR CAN RUN SEVERAL SETS OF PS-HF ALONE UNIQUE PATENTED SPRING CONVEYOR DESIGN INCREASES PRODUCTIVITY AND EFFICIENCY VERY OPERATOR USER-FRIENDLY NON-WOVEN JOINT DEVICE/SAVE TIME AND NON-WOVEN AUTOMATIC CUTTER FOR THE POCKET SPRINGS CAN BE SELECTED AS AN ADDITIONAL PART ULTRASONIC HORN IS MADE OF TITANIUM/DURABLE AND FIRM MOVABLE TEMPER FOR VARIABLE SPRING HEIGHTS LOW AND EASY MAINTENANCE, EASY TO OPERATE/SHORT TRAINING PERIOD SPARE PARTS ARE “OFF THE SHELF” SPRING TYPE: BARREL/CYLINDRICAL FABRIC MATERIAL: 65~90G/M2 FABRIC ROLL DIAMETER MAXIMUM 600mm POWER SUPPLY: 380V, 50/60HZ, 12KVA, INPUT FUSE 63A AIR CONSUMPTION: 30M3/H, 0.8 MPA PERFORMANCE: 60 SPRINGS/MINUTE WORKING TEMPERATURE: +5°C +45°C WEIGHT APPROXIMATELY 2260KG DORSAL SEAL TYPE (UNIT: mm) WIRE DIAMETER SPRING DIAMETER IN THE CENTER SPRING HEIGHT INSIDE THE NON-WOVEN PSHF-DS-01 Ø1.6~ Ø2.2 Ø55~ Ø70 80~140 PSHF-DS-02 Ø1.6~ Ø2.2 Ø55~ Ø70 120~180 PSHF-DS-03 Ø1.6~ Ø2.2 Ø60~ Ø75 80~140 PSHF-DS-04 Ø1.6~ Ø2.2 Ø60~ Ø75 120~180 PSHF-DS-05 Ø1.6~ Ø2.2 Ø60~ Ø75 140~200 PSHF-DS-T2 Ø1.3~ Ø1.6 Ø45~ Ø55 70~120 PSHF-DS-T2 Ø1.3~ Ø1.6 Ø45~ Ø55 120~180 BOTTOM SEAL TYPE (UNIT: mm) WIRE DIAMETER SPRING DIAMETER IN THE CENTER SPRING HEIGHT INSIDE THE NON-WOVEN PSHF-BS-01 Ø1.6~ Ø2.2 Ø45~ Ø60 120~180 PSHF-BS-01 Ø1.6~ Ø2.2 Ø45~ Ø60 140~180 PSHF-BS-01 Ø1.6~ Ø2.2 Ø55~ Ø70 120~180 PSHF-BS-01 Ø1.6~ Ø2.2 Ø55~ Ø70 140~120 PSHF-BS-01 Ø1.6~ Ø2.2 Ø55~ Ø70 160~220 PSHF-BS-01 SPECIAL Learn More

REFERENCE NUMBER: M-4136 SANTEX TENTER FRAME YEAR 2003-UP TO 3400mm – 3 ZONE – VERTICAL PIN – HOT OIL TYPE: SANTEX TENTER FRAME YEAR: 2003 WORKING WIDTH: 800mm UP TO 3400mm SPEED: 2 UP TO 20 M/MIN CHAIN: VERTICAL PIN CHAIN DRYER: 3 COMPARTMENTS DRYER LENGTH: 6 METERS MAX. TEMP.: 230° C HEATING: DIATHERMIC OIL OIL BOILER: GARIONI NAVAL TH 500 CAPACITY: 581 KW, MAX. TEMP. 350° C, NITROGEN COVERED TOTAL LENGTH NEEDED: APPROX. 20,000mm TOTAL WIDTH OF MACHINE: 6,200mm TOTAL HEIGHT OF MACHINE: 3,100mm ENTRY COMBINATION GUIDING CHAIN FOR A-FRAMES CORRECT POSITIONING RUBBERIZED ROLLERS AS INFEED UNIT WECO IMPREGNATION UNIT, CONTROL AND TANK ROLLER WITH LOAD CELL MAHLO WEFT STRAIGHTENER, TYPE: RFMC-10A 6 MEASURING HEADS, WW 4200mm OPERATION PEDESTAL OPERATION PANEL, MONITOR 1 UPPER INFEED ROLLER + 1 BENDED ROLLER E+L FABRIC INFEED VERTICAL PIN CHAIN 3 SECTIONAL DRYER (6 M) COOLING UNIT AT EXIT 2 CAMERAS VIDEO CONTROL STRETCH WORK: 2 PRESSING ROLLERS 3 HEATED DRAG ROLLERS WITH SINGLE DRIVE TEMPERATURE 80° C TO 250° C ON-WINDING UNIT FOR A-FRAMES ELECTRICAL CABINET QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: A-0007 (111DHJK10) A ZIMMER SAMPLE TABLE FOR ROTARY AND FLAT PRINTING – 3200mm ZIMMER SAMPLE TABLE FOR ROTARY AND FLAT PRINTING YEAR: 1998 FULLY RECONDITIONED END: 2012 1 HEAD WIDTH 3200mm BELT 10,000mm TOTAL RATIO 20,000mm COMPLETE WITH: 1 REGGIANI DRYER AT STEAM BELT WIDTH 3060mm 1 COMPARTMENT QUANTITY AVAILABLE: 1 Learn More

TOTAL AUTOMATIC FOR PRE-FOLDED BABY DIAPERS PRE-FOLDED BABY DIAPERS AT RATES OF UP TO 35 PIECES PER MINUTE FEEDS FROM A HEAVY-DUTY CRADLE INFEED CAPABLE OF ROLL DIAMETERS OF 48” AND WEIGHTS OF 1,000LBS. BASIC SINGLE-STAGE FOLDERS CAN PRODUCE DIAPERS IN THE 2-3-2 STYLE, WITH AND WITHOUT SOAKER INSERTION THE OPTIONAL DUAL-STAGE FOLDERS CAN PRODUCE 2-3-2, 2-4-2, AND 2-5-2 STYLES, WITH AND WITHOUT SOAKER INSERTION THE FOLDER KITS ARE DELIVERED FOR TWO WIDTHS AS PER CUSTOMER SPECIFICATIONS ADDITIONAL FOLDERS CAN BE ADDED AN OPTIONAL PRINTER ATTACHMENT IS AVAILABLE FOR PRINTING A COMPANY LOGO OR TRADEMARK ON THE DIAPERS A STACKER IS ALSO AVAILABLE FOR STACKING THE FINISHED DIAPERS INTO BATCHES. THE BATCH SIZE CAN BE SELECTED ON A COUNTER SS-1BD SEWING SYSTEM THE SS-1BD SEWING SYSTEM DETAILED BELOW HAS BEEN DESIGNED ESPECIALLY FOR THE PRODUCTION OF FOLDED BABY DIAPERS WITH DOUBLE-STAGE FOLD. THE SYSTEM IS ALSO CAPABLE OF USING A STANDARD FELT-TYPE INSERT. THE STANDARD FEATURES ARE: POWERED INFEED CRADLE FOR ONE ROLL OF FABRIC WITH A MAXIMUM WIDTH OF 48”, DIAMETER OF 36”, AND WEIGHT OF 750LB (MASTER ROLL), AND ONE ROLL WITH MAXIMUM WIDTH OF 6”, DIAMETER OF 36”, AND WEIGHT OF 30LB. (SOAKER ROLL). COMPLETE WITH EDGE GUIDE LENGTH FOLDER TO CREATE OVERLAPPING, CONTINUOUS FOLD WITH POSSIBILITY OF INSERTING SOAKER. CAN BE ENTIRELY BYPASSED WHEN FOLDING IS NOT REQUIRED. FIRST SEWING STATION WITH TWO RIGHT HAND CHAIN STITCH SEWING HEADS (TYPE 401) TO SEW THE FOLD IN PLACE. DUAL STAGE PULL ROLLS FEED FROM ITEM 2 INTO A DANCER-BAR ACCUMULATOR MEASURING AND CUTOFF STATION (TRAVERSING ROTARY KNIFE) CUTS DIAPER TO LENGTH WITH +/- 1/8” REPEATABILITY. OUTFEED CONVEYOR WITH RIGHT-ANGLE TRANSFER STATION FOR TRANSFER OF CUT PIECES INTO SECOND SEWING SATION. SECOND SEWING STATION WITH LEFT AND RIGHT HAND SERGERS (TYPE 514) AND UPPER AND LOWER CONVEYOR BELTS TO CARRY THE DIAPER BETWEEN THE SERGERS. LEFT AND RIGHT HAND MECHANICAL CHAIN CUTTERS TO CUT THE THREAD CHAIN BETWEEN DIAPERS ELECTRONIC THREAD MOTION DETECTORS ON ALL SEWING HEADS. FOR SHIPPING: REQUIRES ONE CONTAINER -40 FEET TOTAL WEIGHT- 4,525 KGS Learn More

SUCKER SIZING MACHINE MODEL ZTWL WIDTH 2300mm, YEAR 1984 (COMPLETE RECONDITIONED IN YEAR 2002) HEAD MACHINE MOD. WL - WORKING WIDTH 2300mm = 90 INCHES (SERIAL N.121510119). 2 SIZING BOX MOD. LC - FIRST SIZING BOX AT LOW PRESSURE (800 KG). SECOND SIZING BOX FITTED WITH BENNINGER-ZELL PRESSURE ROLLERS AT MEDIUM PRESSURE (3.000 KG) - WORKING WIDTH 1800 mm (SERIAL N.1270119). FOUR PRESSURE ROLLERS FOR EACH SIZING BOX (TWO LATERAL AND TWO UP ROLLERS). 7 DRYING CYLINDERS MOD. ZT + 2 DRYING CYLINDERS FITTED BETWEEN THE TWO SIZING BOXES FOR PRELIMINARY DRYING (SERIAL N.122510119). 1 SECTIONAL BEAM UNWINDING BREAKER. UNWINDING CONTROL MOD. AB. MOISTURE CONTROL BY MAHLO (TEXTOMETER RMS + ELOTEX DMA). DUST SUCTION APPARATUS (NOT ORIGINAL SUCKER). VOLTAGE 380 V - PREPARATION SIZING KITCHEN . MOD. TK (600 LT) - (SERIAL N.1270131) 2 TANKS (800 LT). - MAJOR SPARE PARTS (ORIGINAL SUCKER). 1 HEAD ROLLER 2700 MM 2 PRESSURE ROLLERS MOD. DYCO 1 PRESSURE ROLLER 1 LATERAL PRESSURE ROLLER 1 SIZING PUMP 15 WARPING BEAMS WORKING WIDTH 1800 MM. IN AUGUST 2002 THE ENTIRE MACHINE HAS UNDERGONE A COMPLETE INTENSIVE REVISION AND RECONDITIONED. MANY MECHANICAL AND ELECTRICAL PARTS HAVE BEEN CHANGED WITH NEW PARTS PROVIDED DIRECTLY BY SUCKER AND FITTED WITH THE ASSISTANCE OF A TECHNICIAN FROM SUCKER MULLER COMPANY. THE ENTIRE ELECTRICAL CABINET HAS BEEN CHANGED. AIR JUNCTIONS AND TRANSMISSION WERE COMPLETELY CHANGED WITH NEW ONE. Learn More