Search results for: 'press'

REFERENCE NUMBER: M-3973 (99016AVEZ8RX)-D HOTMELT POWDER SCATTERING AND LAMINATING MACHINE-2200mm 1.LAMINATING LINE : MAKE : VILLARS (CH) ACTUALLY SANTEX YEAR: 1993 WORKING WIDTH : 2200mm (NOMINAL WIDTH 2M10) VOLTAGE: 3X380(400)V TOTAL POWER : 158KW RECOMMENDED MAX. SPEED 10M BUT 15M IS POSSIBLE ORIGINAL CONFIGURATION : INPUT UNIT (WITH POSSIBILITY TO HANG IN ROLLERS BY MEANS OF E.G. FLAT BEARINGS), POWDER SPREADER, INFRARED PREHEATING ZONE AND DOUBLE BAND LAMINATING PRESS (HEATING THROUGH IR) LATER EXTENSION (1997) : 2ND INFRARED ZONE WITH COLD WATER COOLED CALENDAR AT THE BACK EQUIPPED WITH SELVEDGE CUTTING SYSTEM WITH ADJUSTABLE INFRARED FOLLOW UP SYSTEM. STRENGTH OF INFRARED CAN BE ADJUSTED SO THAT E.G. THE UPPER SUBSTRATE CAN BE ‘NEGLECTED’. KNOWN PROBLEMS : 1)INFRARED PREHEATING ZONE : 2 IR STRIPS BROKEN 2)CERTAIN PARTS IR ZONES (MOSTLY EXTERIOR ZONES) OF THE DOUBLE BAND LAMINATING PRESS DO NOT LONGER FUNCTION, BUT SECOND PART OF THE MACHINE CAN STILL BE HEATED TILL 160 À 170°C AND EVEN MORE, BUT THEN AT VERY LOW SPEED 2.ACCUMULATOR WITH WINDER AND CONTROLLING SYSTEM : MAKE : MATTHIJS (ELECTRICAL PART BY ELECTRO VANDEVELDE) YEAR: 1999 OPERATING VOLTAGE : 3X380V CAPACITY ACCUMULATOR : +/- 50M UNIT FUNCTIONS INDEPENDENTLY FROM LAMINATING MACHINE AND SPEED VARIES FROM 0 TILL 50M (SPEED OF WINDING UP UNIT = SPEED LAMINATING MACHINE WHEN ACCUMULATOR IS EMPTY) 3. SUPERSTRUCTURE FOR SUPPLY SECOND SUBSTRATE : MAKE: MENZEL YEAR: 2000 OPERATING VOLTAGE : 3X380V FUNCTIONS INDEPENDENTLY FROM THE LAMINATING MACHINE. SPEED REGULATION BASED ON A 0-10V (=0-15M) EXIT SIGNAL OF THE LAMINATING MACHINE MANUAL RIGHT-LEFT GUIDANCE OF THE SUBSTRATE. A SECOND AUTOMATIC PRE-GUIDANCE IS FORESEEN, BUT THE MOTOR DOES NO LONGER FUNCTION AND IT IS IN PRACTICE NOT REQUIRED BECAUSE THE ROLLS ARE ALWAYS WINDED STRAIGHT. A MEASURING ROLLER IS INCLUDED TO MEASURE THE TENSION OF THE SUBSTRATE. THIS MEASURING ROLLER DIRECTS THE MOTOR SPEED SO THAT THE ADJUSTING OF THE TENSION STAYS STEADY. IT IS EVEN POSSIBLE TO GO TO A +/- TENSIONLESS SITUATION. THE LINE IS MOUNTED ON A SELF-MADE PLATFORM EQUIPPED WITH A SIMPLE UNWINDING UNIT KNOWN PROBLEM : PRESSURE ROLLER TO AVOID THAT THE SUBSTRATE “SLIDES” OVER THE BRAKE ROLLER IS WORN OUT, BUT IS IN PRAXIS NOT NEEDED. MOTOR OF THE PRE-GUIDANCE IS BROKEN (SEE ABOVE) 4.MISCELLANEOUS : SELF-BUILD ENTRY J-BOX WITH SIMPLE ROLL MEASUREMENT SEPARATE J-BOX FOR UNWINDING FROM DOCKS, SO THAT CAN BE LAMINATED IN THE POLE DIRECTION SEWING MACHINE MERROW TO MAKE FLAT SEAMS ON FINE/THIN FABRICS SELVEDGE CUTTERS ARE MOUNTED ON A SYSTEM SO THAT THE FABRIC CAN BE LEVELLED EASILY, EVENTUALLY CAN BE WINDED ON DOCKS. INCLUDING 2 DOCKS OF 2M30 OF WHICH 1 WITH FLAP BEARINGS Learn More

REFERENCE NUMBER: M-3994

CONE DYEING MACHINE MASTER BM 300 400KG YEAR 1999

 

CONE DYEING MACHINE

MASTER BM 300, 400 KG, RACK WITH 43 ​​BARS.

MAX OPERATING PRESSURE MAIN BODY: 5

MAXIMUM OPERATING TEMPERATURE OF MAIN BODY:204C°

MAX OPERATING PRESSURE COIL :16

MAXIMUM OPERATING TEMPERATURE OF SERPENTINE:204C°

CAPACITY OF MAIN BODY :4085 LITERS

CAPACITY 65 LITERS SERPENTINE

YEAR 1999

Learn More

REFERENCE NUMBER: M-3993

CONE DYEING MACHINE MASTER BM 100 HS 125K YEAR 2001 -125 KGS

 

CONE DYEING MACHINE

MASTER BM 100 HS

125K

RACK WITH 12 BARS

MAX OPERATING PRESSURE MAIN BODY: 5

MAXIMUM OPERATING TEMPERATURE OF MAIN BODY: 158°C.

MAX OPERATING PRESSURE COIL: 16

MAXIMUM OPERATING TEMPERATURE OF SERPENTINE: 204°C

CAPACITY OF MAIN BODY: 1260 LITERS

CAPACITY OF SERPENTINE: 25 LITERS

YEAR: 2001

Learn More

WEAVING MACHINES BENNINGER BEN DIRECT WARPER YEAR 2006 BEAM DIAMETER 1000mm, WIDTH 2200mm V-CREEL – 1024 ENDS, AUTOMATIC CUTTING AT CREEL CHANGE ELECTRICAL STOP MOTION, MECHANICAL TENSIONER MICROPROCESSOR CONTROL SUCKER MOENUS SIZING MACHINE YEAR 2006 SIZING MACHINE SUCKER MOENUS Z 14, WIDTH 3400mm 1000mm FLANG DIAMETER, 14 DRYING CYLINDERS 2 SOW BOXES, 2 DIP AND 2 NIP, 24 WARP BEAMS CREEL, FULLY AUTOMATIC PLC CONTROL SIZE MIXING COOLER, 1200 LITERS SIZE STORAGE VESSEL, 1200 LITERS STAUBLI DELTA AUTO DRAWING IN MACHINE YEAR 2006 AUTO DRAWING IN MACHINE, STAUBLI DELTA 110 3400mm, YARN MODULE (HM5), HEALD MODULE (HM2) REED MODULE (HM6), DROP WIRE MODULE (HM3) AND CONTROL MODULE JAYTEX WARP TYING MACHINE YEAR 2005 WARP TYEING MACHINE JAYTEX TROLLEY WITH TRANSFORMER WITH 2 NOS. TYING FRAMES SETIA KIJJI REED CLEANING MACHINE YEAR 2006 SETIA KIJJI – ULTRA SONIC CLEANING MACHINE REED CLEANER CONSISTS OF RINSING UNIT ULTRASONIC UNIT DRYING UNIT, SEMI AUTOMATIC PROCESS USING PLC. (18 UNITS) TSUDAKOMA AIRJET LOOM ZAX 9100 YEAR 2006 3E+06 EACH – 16 SHAFTS AIRJET LOOM TSUDAKOMA ZAX 9100, 3400mm, STAUBLI ELECTRONIC DOBBY 16 SHAFTS, 2/4 WEFT INSERTION, CRANK BEAT UP, LENO SELVEDGE ELECTRONIC LET OFF, ELECTRONIC TAKE UP, 1.5 BEAMS, 1.5 CLOTH ROLLS (48 UNITS) TSUDAKOMA AIRJET LOOM ZAX 9100 YEAR 2006 3E+06 – 10 SHAFTS AIRJET LOOM TSUDAKOMA ZAX 9100, 3400mm, STAUBLI CAM MOTION 10 SHAFTS, 2/4 WEFT INSERTION, CRANK BEAT UP, LENO SELVEDGE ELECTRONIC LET OFF, ELECTRONIC TAKE UP, 1.5 BEAMS, 1.5 CLOTH ROLLS (24 UNITS) TSUDAKOMA AIRJET LOOM ZAX 9100 YEAR 2006 2E+06 – 6 SHAFTS AIRJET LOOM TSUDAKOMA ZAX 9100, 3400mm, STAUBLI CAM MOTION 6 SHAFTS, 2/4 WEFT INSERTION, CRANK BEAT UP, LENO SELVEDGE ELECTRONIC LET OFF, ELECTRONIC TAKE UP, 1.5 BEAMS, 1.5 CLOTH ROLLS (2 UNITS) GREY INSPECTION MACHINE YEAR 2006 INSPECTION TABLE IS LAMINATED, PUSH BUTTON CONTROLS ARE GIVEN ON THE DRIVE BOX ON THE RIGHT HAND SIDE, CLOTH CAN RUN IN FORWARD AS WELL AS IN REVERSE DIRECTION FABRIC RUNS FACE IN/FACE OUT SPECIAL JOGGING OR INCHING DEVICE FABRIC FOLDING MACHINE YEAR 2006 SWINGING MOTION IS MINIMIZED TO ENSURE HIGH MACHINE CAPACITY AND INCREASE OUTPUT FOLDING BLADES ARE MOUNTED ON A CARRIAGE WHICH HAS A TO AND FRO MOVEMENT ACHIEVED BY SPECIAL STEEL ROLLER CHAIRS BALE PRESS YEAR 2001 BATH BEI HYDRAULIC BALE PRESS MACHINE FABRIC PROCESSING SINGEING MACHINE YAMUNA SINGEING MACHINE WIDER WIDTH – YEAR 2006 (2 UNITS) HYDRAULIC JIGGER KUSTER CALICO YEAR 2006 3E+06 VERTICAL DRYING RANGE YEAR 2006 CONTINUOUS DYEING RANGE – KUSTER CALICO KUSTER CALICO COLD PAD BATCH YEAR 2006 HARISH STENTER – SUPRA 5 DLXI ALMAC FINISH INSPECTION MACHINE YEAR 2006 SHRI NARAYAN COTEX FINISH PLAITING MACHINE YEAR 2006 Learn More

TT-8706 KARL MAYER ROTAL SINGLE-END SIZING UNIT TYPE FILSIZE-S-F-1800, WORKING WIDTH 1800mm, YEAR 2018 1. KARL MAYER ROTAL SINGLE-END SIZING UNIT 2. TYPE FILSIZE-S-F-1800 3. YEAR OF CONSTRUCTION 2018 4. WORKING WIDTH 1800mm QUANTITY: 1 Learn More

TT-8708 BENZ LFV500 LABORATORY PADDER, WIDTH 500mm QUANTITY: 1 Learn More

TT-8653 ARIOLI OPEN-WIDTH WASHING MACHINES, WIDTH 2000mm, YEAR 1988 1. OPEN-WIDTH WASHING MACHINES FOR AFTER PRINTING 2. BRAND: ARIOLI 3. YEAR: 1988 4. WIDTH: 2000mm QUANTITY: 1 Learn More

TT-8645 OPEN WIDTH WASHING MACHINE FOR WOVEN FABRIC, WORKING WIDTH 1800mm, 5 WASHING CHAMBERS, 2 WASHING DRUMS IN EACH CHAMBER 1. OPEN WIDTH WASHING MACHINE FOR WOVEN FABRIC 2. WORKING WIDTH: 1800mm 3. 5 WASHING CHAMBERS 4. 2 WASHING DRUM IN EACH CHAMBER 5. DRIVING SIDE: (PLEASE SPECIFY) Learn More

TT-8633 STX MAN DIESEL/HFO 18V32/40 GENSETS, 9.0 MW, 50/60 Hz 1. STX MAN DIESEL/HFO 18V32/40 GENSETS 2. GROSS ELECTRICAL OUTPUT APPROX. 9.0 MW 3. BRAND MAN DIESEL & TURBO, TYPE 18V32/40 - 4 STROKE, UNUSED EACH UNIT CONSISTS OF MOTOR, GENERATOR, RACK / BASE-FRAME QUANTITY: 20 UNITS Learn More

TT-8594 KUSTERS CALANDER TYPE 212.50-1800, WORKING WIDTH 1800mm, YEAR 1986 1. KUSTERS CALANDER 2. TYPE 212.50-1800 3. YEAR 1986 QUANTITY: 1 Learn More