Search results for: 'Screen p''

H-1261 GOOSE FEATHER CLEANING MACHINE

LIST OF COMPONENTS FOR THE GOOSE FEATHER CLEANING MACHINE:

1) RINSING MACHINE OF THE TYPE 2000 (STAINLESS STEEL USED FOR IT)
EXTERIOR DIMENSION: 4000×2000×2600×Ф1800MM
QUANTITY: 1

2) GOOSE FEATHER ADDING MACHINE
EXTERIOR DIMENSION: 4000×1800×3300MM
QUANTITY: 1

3) WATER TANK
EXTERIOR DIMENSION: Ф1930MM×2440MM
QUANTITY: 1

4) DEWATERING MACHINE FLAT PLATE TYPE (BEING EQUIPPED WITH VARIABLE FREQUENCY CONTROL) - 2 SETS
QUANTITY: 2

5)DRYER OF THE TYPE 2000 (BEING EQUIPPED WITH ELECTRONIC WEIGHING)
EXTERIOR DIMENSION: 4500×2100×2900MM
QUANTITY: 1

6)GOOSE FEATHER ADDING MACHINE FOR DRYER(STAINLESS STEEL USED FOR IT AND ELECTRONIC WEIGHING INCLUDED)
EXTERIOR DIMENSION: 1500×1200×3600MM
QUANTITY: 1

7)THE COOLER OF THE TYPE 4700(STEEL & WOOD STRUCTURE, OPTIMIZED MOISTURE PROOF PANEL)
EXTERIOR DIMENSION: 4700×2350×2600×Ф2000MM
QUANTITY: 1

8) SORTING EQUIPMENT
QUANTITY: 2

9) POWER DISTRIBUTION CABINET
QUANTITY: 2

RINSING MACHINE: TYPE 2000

1. EXTERIOR DIMENSION: 4000×2000×2600×Ф1800MM DIAMETER

2.THE MATERIAL OF 14MM IN THICKNESS STAINLESS STEEL IS USED FOR THE WALL FOR WASHING MACHINE AND 5MM IN THICKNESS FOR BARREL

3. THE MATERIAL OF AISI 1045 IS USED FOR THE SPINDLE OF THE SQUARE SHAPE(SPECIFICATION =108MMX108MM). WRAPPED WITH 2MM STAINLESS STEEL IN THE OUTER.
10MM IN THICKNESS STAINLESS STEEL IS FOR HOOP OF VANE.
4MM IN THICKNESS STAINLESS STEEL WHICH IS FOLDED IS FOR VANE.
HOOP SCREW OF M14 X 70 (HIGH STRENGTH GRADE) ARE USED.
THE BEARING HOUSING &BEARING OF UKP318 IS USED FOR THE SPINDLE.

4.THE SIEVE OF 1.5MM IN THICKNESS STAINLESS STEEL IS USED FOR WACHING MACHINE.THE HOLE IS 1.8MM IN DIAMETER. HOLE SPACING 3.8MM .THE STAINLESS STEEL OF 2MM IS USED FOR THE OBLIQUE OF OUTPUTTING THE GOOSE FEATHER.THE OUTLET NEAR DEWATERING MACHINE FOR GOOSE FEATHER CAN BE TURNED UPWARD. FOR GOOSE FEATHER.

5.THE PIPE FOR WATER INLET IS 114MM IN DIAMETER

6.THE POWER OF FAN: 7.5KW AND SPEED: 2900R/M

7.THE PIPE FOR FEEDING GOOSE FEATHER IS 250MM IN DIAMETER.

8.THE REDUCER FOR THE SPINDLE: JZQ-400. THE POWER OF MOTOR IS 15KW AND OUTPUT SPEED IS 42 R/M

9.EXTERIOR DIMENSION OF THE BOTTOM FOR WASHING MACHINE: WIDTH=1600MM;LENGTH=3500MM.ONE SIEVE OF 1MM IN THICKNESS FOR IT.

WATER TANK

1. THE DIMENSION OF TANK: Ф1930MM×2440MM

2.THE STAINLESS STEELOF 2MM IN THICKNESS FOR ITS BARREL AND 3MM FOR THE BOTTOM.THE COVER IS CONSTUCTED WITH ANGLE IRON OF STAINLESS STEEL AND INNER COVER 2MM STAINLESS STEEL PLATE.

DEWATERING MACHINE OF TYPE 1600

1. ONE SETS OF RINSING MACHING OF THE TYPE 2000 IS EQUIPPED WITH TWO SETS DEWATERING MACHINE OF THE TYPE 1600

2.THE POWER OF MOTOR=11KW-17KW.DOUBLE SPEED MOTOR WITH VARIABLE FREQUENCY CONTROL.

DRYER OF TYPE 2000

1. EXTERIOR DIMENSION: 4500×2100×2900×Ф1800MM（DIAMETER）

2. THE MATERIAL OF 14MM IN THICKNESS STAINLESS STEEL(Q345R) IS USED FOR THE WALL FOR WASHING MACHINE. 10MM STAINLESS STEEL(Q345R) IS USED FOR INNER COVER OF THE BARREL AND 10MM STAINLESS STEEL (Q345R) PLATE FOR OUTER COVER OF THE BARREL.

3. THE INNER WALL OF WIND PLATE IS 0.5MM IN THICKNESS AND THE HOLE 1.5MM IN DIAMETER STAINLESS STEEL. 3MM COLD ROLLED PLATE IS USED FOR THE OUTER GATE.

4. THE SEAMLESS PIPE OF Ф108MM×10MM IS FOR THE MAIN SPINDLE.THE STEEL PLATE OF 10MM IN THICKNESS IS FOR THE VANE.THE WIDTH OF THE VANE IS 80MM. HOOP SCREW IS M12X70

6. THERE ARE FOUR INLET OF 1.5INCH IN DIAMETER FOR STEAM.
RELIEF VALVE FROM 3 KILO TO 7 (1 SETS)
THE PRESSURE GAGE (0-16 KILO) (2 SETS)
THE THERMOMETER (0-150 DEGREE) (1 SETS)
THERE ARE THREE DRAIN HOLE OF 1.5 INCH IN DIAMETER AT THE BOTTOM

6. THERE ARE TWO LAYERS FOR GOOSE FEATHER ADDING FOR DRYER: 1.5×1.2×3.6M.THEY ARE MADE WITH STAINLESS STEEL.THE SPECIFICATION OF CHARGING SPOUT ON THE TOP OF DRYER IS 1.55 X 0.55M.

7. THE OUTLET FOR GOOSE FEATHER OF DRYER CAN BE TURNED UPWARD.THE PIPE FOR OUTPUTTING GOOSE FEATHER IS 300MM IN DIAMETER.

8. TWO FANS ARE EQUIPPED FOR PRECISE WASHING LINE.THE POWER OF FAN FOR ADDING GOOSE FEATHER IS 7.5KW,SPEED: 2900R/M.WHICH IS USED TOGETHER WITH GOOSE ADDING MACHINE OF WASHING MACHINE.THE POWER OF FAN FOR DRYER IS 5.5KW,SPEED IS 2900 R/M.

9. MAIN SHAFT SPEED REDUCER FOR BELT BRIDGE MOTOR 7.5KW.OUTPUT SPEED IS 52 R/M
THE COOLER IS OF TYPE 4700

1. EXTERIOR DIMENSION: 4700×2350×2600×Ф2000MM DIAMETER

2. THE EXTERIOR IS CONSTRUCTED WITH THE WHOLE WOOD STRUCTURE.THE MATERIAL OF STEEL WITH 4# ANGLE STEEL AND 30X30 SQUARE TUBE IS FOR THE INNER SKELETON.

3. THE SEAMLESS PIPE OF Ф108MM×10MM IS FOR THE MAIN SPINDLE.THE STEEL PLATE OF 14MM IN THICKNESS IS FOR THE VANE.THE WIDTH OF THE VANE IS 80MM. HOOP SCREW IS M16X70

4. THE DIAMETER OF WIND PIPE: MAIN PIPE IS 300MM IN DIAMETER AND BRANCH IS 250MM IN DIAMETER.THERE ARE FOUR AIR OUTLET OF 300MM IN DIAMETER EQUIPPED EQUALLY SPACE.

5. ONE SIEVE IS EQUIPPED FOR THE COOLER.THE SIEVE IS MADE WITH 0.6MM IN THICKNESS GALVANIZED STEEL SHEET.THE HEIGHT OF HOLE IS 1.1MM.THE SCREEN FRAME IS MADE WITH 3# ANGLE STEEL.

6.THERE ARE TWO SORTING BOX WHICH IS CONSTRUCTED WITH STEEL FRAME AND WOODEN STRUCTURE. SIEVE 14 MESH GALVANIZED MESH BOLD

7. ONE FAN IS FOR THE COOLER.THE POWER OF THE FAN IS 11KW AND OUTPUT SPEED IS 2900 R/M

8. THE MOTOR FOR THE MAIN SPINDLE IS 15KW (6 POLE).THE SPEED OF 140 R/M IS FOR THE COOLER.

QUANTITY: 1

REFERENCE NUMBER: G-8608

MODEL N-32 COTTON FANCY YARN TWISTER

ITEM:: FANCY YARN TWISTER

MODEL: N-32

BASIC FUNCTION: SPINNING COTTON LOOP YARN, TT YARN, SLUB/KNOP YARN, 2 COLOR CHANGER FANCY YARN

SPECIFICATIONS: (AS PER ONE SET):

CONTROL: TOUCH SCREEN+ PLC

NUMBER OF SPINDLES: 12

RANGE OF COUNT: 1 TO 48Nm

RANGE OF FIBRE LENGTH: 22 TO 64 TO 102mm

RANGE OF DRAFT: APPROXIMATELY 2 TO 50

SPEED OF HOLLOW SPINDLE: 12000RPM

SPEED OF FALSE-TWISTER: 18000RPM

DRAFTING ROLLER: Φ28/28/28mm

FIBRE LENGTH RANGE: 22 TO 42mm

GROOVED DRUM: Φ82 X 105mm

POWER: 2.2KW

VOLTAGE220 AC  50HZ: 220/3 X 380V  AC  50HZ

EXTERNAL DIMENSIONS: 2500mm X 1000mm X 2200mm

REFERENCE NUMBER: K-3891

LABORATORY ROTOR SPINNING MACHINE

MACHINE: X-03 LABORATORY ROTOR

NAME:SPINNING MACHINE

MODEL: X-03

BASIC FUNCTION:TO SPIN COTTON INTO OE YARN

TECHNIQUE DATA:

CONTROL: TOUCH SCREEN+PLC+INVERTER

SPINDLE NUMNER: 1

FIBER LENGTH: 22mm TO 42mm

OUTPUT: ABOUT 0.25KG TO 1 KG

ROTOR SPEED: 30000 RPM

OPENING ROLLER SPEED: 6000 RPM

TAKE-UP SPEED: 20-110M/MIN

DRAFTING RATIO: 30-250

TOTAL POWER: 640W 

VOLTAGE: 220/3×380V AC 50/60Hz

MACHINE DIMENSIONS: 800mm×600mm×1700mm

REFERENCE NUMBER: P-4326

BABY WET WIPES PRODUCTION LINE

Model L80

Machine Characteristic
Control system: Multi-Axis Motion Controller
Drive element: servo motor
Operate interface: 10" LCD touch screen
Cutting: synchronous flail knife
Packing style: automatic distribute,2 sets packing machine can respective online
Unwinding structure: 80 electronic eyes detect online (auto splicing machine: 32 sets)
Frequency division detection: 80 electronic eyes detect online
Frequency division pulling: 4 sets dry wipes pulling , 2 sets wet wipes pulling
Auto splicing: film automatic splicing, label automatic switching
Frequency division detection: nonwoven ,film, label detect respectively
Metal detect: online metal detector
Inferior eliminate: aluminizing paste connector rejected online
Flow control: 2.5-4 times, flow meter control, no liquid recovery
Moisture type: 80 fluid pipes spray independently
SUS Agitate tank: 2 sets, 1000L stainless steel agitate tank
Liquid level control: electronic detection, auto control
 
Specifications
Raw material: spunlaced nonwoven, therbond etc.  nonwovens
Raw material specification: max W220mm, φ1400mm, max W1050mm, φ1000mm
Axis QTY settings:80 rolls raw materials (auto splicing type 32 rolls)
Diameter of ventilating shaft: 3"
Suitable packing material :BOPP  PET/PE PET/AL/PE etc. heat-seal material
Packing Film specification: max W420mm, φ350mm
Axis QTY settings: 2 sets film, automatic bonding without stopping machine
Diameter of ventilating shaft: 3"
Suitable label: transparent label & opaque label
Label size: max W100mm  φ400mm
Axis QTY settings: 2 sets label, automatic switching without stopping(can be set as safety label)
Diameter of ventilating shaft: 3"
Folding  type: single extraction & interfold type
Wet wipes size:L120-250mm  W90-110mm
Open size: L120-250mm W150-220mm
Package size: L150-350mm W80-120mm H20-100mm
Design speed: 120bags/min &250cutting/min
Production speed: 100 bags/min &200 cutting/min
Machine space: L54000mm W3500mm H2100mm, L57000mm W4600mm H2100mm(auto splicing machine)
Power: AC 380V 50/60Hz 35KW(auto splicing machine:40KW)
Compressed air: 0.6-0.8Mpa 500L/min
Machine net weight :30000kg(auto splicing machine 35000Kg)

Option equipment: Coding machine Big roll material automatic splicing

QUANTITY: 1

REFERENCE NUMBER: P-4325

WET WIPES PRODUCTION LINE

Model L40

Machine Characteristic
Control system: Multi-Axis Motion Controller
Drive element: servo motor
Operate interface: 10" LCD touch screen
Cutting: synchronous flail knife
Packing style: end seal & reciprocating type(connecting 2 packing machine need explain)
Unwinding structure: 40 sets, 40 electronic eyes detect online(16 sets big rolls material) 
Auto splicing: film automatic splicing, label automatic switching                      
Frequency division detection: nonwoven, film, label detect  respectively
Frequency division pulling: 2 sets dry wipes pulling , 2 sets wet wipes pulling
Auto splicing: film automatic splicing, label automatic switching
Frequency division detection: nonwoven ,film, label detect respectively
Metal detect: online metal detector
Inferior eliminate: aluminizing paste connector rejected online
Flow control: 2.5-4 times, flow meter control, no liquid recovery
Moisture type: 40 fluid pipes spray independently
SUS Agitate tank: 2 sets, 1000L stainless steel agitate tank
Liquid level control: electronic detection, auto control
 
Specifications
Raw material: spunlaced nonwoven, therbond etc.  nonwovens
Raw material specification: max W220mm, φ1400mm, max W1050mm, φ1000mm
Axis QTY settings:40 rolls raw materials (auto splicing type 32 rolls)
Diameter of ventilating shaft: 3"
Suitable packing material :BOPP  PET/PE PET/AL/PE etc. heat-seal material
Packing Film specification: max W420mm, φ350mm
Axis QTY settings: 2 sets film, automatic splicing without stopping machine
Diameter of ventilating shaft: 3"
Suitable label: transparent label & opaque label
Label size: max W100mm  φ400mm
Axis QTY settings: 2 sets label, automatic switching without stopping(can be set as safety label)
Diameter of ventilating shaft: 3"
Folding  type: single extraction & interfold type
Wet wipes size:L120-220mm  W90-110mm
Open size: L120-220mm W150-220mm
Package size: L150-350mm W80-120mm H10-80mm
Design speed: 60bags/min &250cutting/min
Production speed: 50 bags/min &200 cutting/min
Machine space: L31000mm W2500mm H2100mm. L32600mm W3600mm H2100mm(auto splicing machine)
Power: AC 380V 50/60Hz 22KW(auto splicing machine:25KW)
Compressed air: 0.6-0.8Mpa 400L/min
Machine net weight :22000kg(auto splicing machine 25000Kg)

Option equipment: Coding machine Big roll material automatic splicing

QUANTITY: 1

REFERENCE NUMBER: P-4324

PORTABLE WIPES, MODEL WL68

Model: WL68

Machine Characteristic
Control system: Multi-Axis Motion Controller
Drive element: servo motor
Operate interface: 8" LCD touch screen
Packing style: end seal & reciprocating  type
Frequency division detection: nonwoven, film, label detect respectively
Auto splicing: raw material & film automatic bonding, label automatic switching
Wipes stacking: manipulator
Inferior eliminate: color bonding connector rejected online
Flow control: 2.5-4 times, flow meter control
Moisture type: 4 fluid pipes  spray independently
SUS Agitate tank: 2 sets, 600L stainless steel agitate tank
Liquid level control: electronic detection, auto control

Specifications
Raw material: spunlaced nonwoven, therbond etc.  nonwovens
Raw material specification: max W800mm, φ1000mm
Axis QTY settings:2 rolls raw materials ,1 roll cut into 4 channels,1 roll stand by auto splicing
Diameter of ventilating shaft: 3"
Suitable packing material :BOPP  PET/PE PET/AL/PE etc. heat-seal material
Packing Film specification: max W420mm, φ350mm
Diameter of ventilating shaft: 3"
Suitable label: transparent label & opaque label
Label size: max W100mm  φ400mm
Axis QTY settings: 2 sets label, automatic switching without stopping(can be set as safety label)
Folding  type: Z fold
Wet wipes size:L90-105mm  W55-100mm
Open size: L175-205mm W140-200mm
Package size: L130-200mm W60-110mm H5-50mm
Production speed: 70 bags/min &1200 pieces/min
Machine space: L8100mm W4000mm H2100mm
Power: AC 380V 50/60Hz 20KW
Compressed air: 0.6-0.8Mpa 250L/min
Machine net weight : 7500kg

Option equipment: Coding machine Metal detector

QUANTITY: 1

REFERENCE NUMBER: P-4328

FLAT TYPE WET WIPES

Model: WL-F
Machine Characteristic
Control system: Multi-Axis Motion Controller
Drive element: servo motor
Operate interface: 8" LCD touch screen
Packing style: Double end seal & rotary type
Frequency division detection: nonwoven ,film detect respectively
Automatic correction: material EPC& film EPC
Auto splicing: raw material & film automatic splicing
Moisture type: quantitative moisture
SUS Agitate tank: 600L stainless steel agitate tank
Liquid level control: electronic detect control automatically

Specifications
Raw material: spunlaced nonwoven, airlaid paper etc.
Raw material specification: max W250mm, φ1100mm
Axis QTY setting:2  rolls raw material, auto splicing without stopping
Diameter of ventilating shaft: 3"
Suitable packing material :BOPP CPP PET/PE PET/AL etc. heat-seal material
Packing Film specification: max W280mm, φ350mm
Axis QTY setting:2 sets film, automatic splicing without stopping machine
Diameter of ventilating shaft: 3"
Folding type: V、W fold
Wet wipes size: L60-110mm W35-80mm
Open size: L120-220mm W120-250mm
Package size: L90-180mm W40-90mm
Production speed: 300-400bags/min, design 450 bags/min
Machine space: L5500mm W1250mm H1830mm
Power: AC 380V 50/60Hz 8KW
Compressed air: 0.6-0.8Mpa 100L/min
Machine net weight : 2000kg

Option equipment: Production counting machine Coding machine

QUANTITY: 1

REFERENCE NUMBER: P-4322

WET WIPES PRODUCTION LINE

MODEL: WL100
Machine Characteristic
Control system: Multi-Axis Motion Controller
Drive element: servo motor
Operate interface:  LCD touch screen
Packing style: end seal & reciprocating type
Frequency division detection: nonwoven, film, label detect respectively
Auto splicing: raw material & film automatic splicing, label automatic switching
Flow control: 2.5-4 times, flow meter control, no liquid recovery
Moisture type: 10 fluid pipes spray independently
SUS Agitate tank: 2 sets, 600L stainless steel agitate tank
Liquid level control: electronic detection, auto control
 
Specifications
Raw material: spunlaced nonwoven, therbond etc.  nonwovens
Raw material specification: max W1050mm, φ1000mm
Axis QTY settings:4  raw materials,2 rolls cut into 10 channels, 2 rolls standby auto splicing
Diameter of ventilating shaft: 3"
Suitable packing material :BOPP  PET/PE PET/AL/PE etc. heat-seal material
Packing Film specification: max W420mm, φ350mm
Axis QTY settings: 2 sets film, automatic splicing without stopping machine
Diameter of ventilating shaft: 3"
Suitable label: transparent label & opaque label
Label size: max W100mm  φ400mm
Axis QTY settings: 2 sets label, automatic switching without stopping(can be set as safety label)
Diameter of ventilating shaft: 3"
Folding  type: single extraction & interfold type
Wet wipes size:L120-220mm  W90-110mm
Open size: L120-220mm W150-210mm
Package size: L150-300mm W80-120mm H10-80mm
Production speed: 50 bags/min &4000 pieces/min
Machine space: L15000mm W3500mm H2100mm
Power: AC 380V 50/60Hz 18KW
Compressed air: 0.6-0.8Mpa 250L/min
Machine net weight :12000kg

Option equipment: Coding machine Metal detector

QUANTITY: 1

REFERENCE NUMBER: P-4332

WET WIPES FOLDING MACHINE

MODEL RF

Machine  Characteristic:
Control system: PLC
Drive element: inverter control
Operate interface: LCD touch screen
Detection online: splicing  connector detect
Auto splicing: raw material automatic  splicing
Wipes counting: auto counting, set by LCD
Flow control: 2.5-4 times moisture
Moisture type: 2 liquid pipes spray
Cutting: stainless steel round knife
Protective alarm: breakdown alarm and stop

Specifications:
Raw material: spunlaced nonwoven, therbond etc. nonwoven
Raw material specification: max W250mm, Φ1100mm
Axis QTY settings: 2 rolls raw material, auto splicing
Diameter of ventilating shaft: 3"
Folding type: Z, W fold
Wet wipes size: L100mm  W50-100mm (special  specifications need be marked)
Open size: L200mm  W140-250mm
Production speed: 500-600 pieces/min, design 650 pieces/min
Machine space: L4900mm  W1200mm  H1500mm
Power: AC 380V  50/60Hz  4KW
Compressed air: 0.6-0.8Mpa   100L/min
Machine  net  weight: 2000kg

Option  equipment:  Stainless steel agitate tank Automatic  Knife  grinder

QUANTITY: 1

REFERENCE NUMBER: P-4323

WET WIPES PRODUCTION LINE

Model WL100

Machine Characteristic
Control system: Multi-Axis Motion Controller
Drive element: servo motor
Operate interface:  LCD touch screen
Packing style: end seal & reciprocating type
Frequency division detection: nonwoven, film, label detect respectively
Auto splicing: film automatic bonding, label automatic switching
Flow control: 2.5-4 times, flow meter control, no liquid recovery
Moisture type: 12 fluid pipes spray independently
SUS Agitate tank: 2 sets, 600L stainless steel agitate tank
Liquid level control: electronic detection, auto control
 
Specifications
Raw material: spunlaced nonwoven, therbond etc.  nonwovens
Raw material specification: max W350mm, φ1400mm
Axis QTY settings:12 rolls raw materials,12 electronic eyes detect online
Diameter of ventilating shaft: 3"
Suitable packing material :BOPP  PET/PE PET/AL/PE etc. heat-seal material
Packing Film specification: max W420mm, φ350mm
Axis QTY settings: 2 sets film, automatic bonding without stopping machine
Diameter of ventilating shaft: 3"
Suitable label: transparent label & opaque label
Label size: max W100mm  φ400mm
Axis QTY settings: 2 sets label, automatic switching without stopping(can be set as safety label)
Diameter of ventilating shaft: 3"
Folding  type: single extraction & interfold type
Wet wipes size:L120-220mm  W90-115mm
Open size: L120-220mm W150-330mm
Package size: L150-300mm W80-120mm H10-80mm
Design speed: 120bags/min &250cutting/min
Production speed: 50 bags/min &4000 pieces/min
Machine space: L16000mm W2500mm H2100mm
Power: AC 380V 50/60Hz 18KW
Compressed air: 0.6-0.8Mpa 250L/min
Machine net weight :10000kg

Option equipment: Coding machine Metal detector 

QUANTITY: 1