Search results for: 'Conveyor'

MAKE: LAROCHE
MODEL: SUPER OLYMPIC
WIDTH: 1500mm
YEAR: MID 1980’S
6 CYLINDERS EACH LINE
CYLINDER DIAMETER: 1000mm
ALL CYLINDERS ARE DESIGNED FOR PINNED LAGS AND THERE IS LIFE LEFT IN MOST OF THE LAGS SETS.
LAGS: (1) 8mm x 135, (1) 10mm x 160, (1) 12 x 166, (3) 13mm x 174
EACH CYLINDER FED BY A FEED ROLL TO FEED DISH COMBINATION AND THE FIBER IS TRANSFERRED TO THE FOLLOWING CYLINDER VIA A CONDENSING SECTION.
MOTORS: 3 x 150 HP 575 VOLT
TOTAL REQUIRED POWER: 875 AMPS
NEW CONTROLS WITH ABB DRIVES
FEED CHUTES
LUMMUS BALERS
PINNED CYLINDERS
TEMAFA BLENDING BINS
EXIT CONVEYORS
EACH SECTION EQUIPPED WITH ANSUL DRY POWDER FIRE PROTECTION SYSTEM THAT IS ACTIVATED FROM EMBER DETECTED IN THE DUCT REMOVAL PIPING.
LINES INCLUDE ALL NECESSARY FANS, MAGNETS, DUCTING AND WIRING

IN PERFECT WORKING ORDER

QUANTITY: 2 LINES

REFERENCE NUMBER: J-2326
QUILTER FOR RAGS, 12 INCH WIDTH – NEW – RAG QUILTER

QUILTING MACHINE FOR RAGS
SEWS RAGS CONTINUOUSLY
SEW HEAD: 7 NEEDLES AND 7 LOOPERS 
MAKES A CHAIN STITCH ON THE CONVEYED RAGS
USES OVERLOCK THREAD
DISTANCE BETWEEN NEEDLES: 250mm (ENSURES THAT EVEN SMALL RAGS ARE SEWN)
1 HP MOTOR, 3-PHASE, 220 VOLT
WITH FREQUENCY INVERTER TO ADJUST THE ROTATION SPEED OF THE MOTOR AS NEEDED
HEIGHT: 1800mm
WIDTH: 960mm
DEPTH; 370mm
CONVEYOR WIDTH: 200mm
CONVEYOR LENGTH: 1560mm
MACHINE TOTAL LENGTH WITH CONVEYOR: 2800mm

AFTER SEWING, THE QUILT IS TRANSPORTED OUT INTO ROLLS WHICH CAN BE CUT ACCORDING TO CUSTOMER NEEDS
OPERATION: PLACE A LARGER RAG AS THE BOTTOM LAYER, SMALLER RAGS AS FILLING, AND ANOTHER LARGER RAG AS THE TOP LAYER. OPERATION REQUIRES 2 TO 3 OPERATORS.
TO REDUCE THE NUMBER OF OPERATORS REQUIRED, A FIBER ROLL AS CAN BE USED AS THE LOWER LAYER. THIS ALSO INCREASES THE PRODUCTION RATE.
DAILY PRODUCTION: VARIES BETWEEN 300 TO 500 KG PER 8 HOURS OF OPERATION
FOR KNIT FABRICS SUCH AS COTTON, VISCOSE, SWEATSHIRT FLEECE, NYLON STRETCH-FABRIC, PIQUET AND POPELINE
THERE IS NO MATERIAL WASTE AS THE MACHINE USES 100% OF THE RAGS
WORKING WIDTH: 12 INCHES
NEEDLE SPACING: 1 INCH
WITH LOOPER STRUCTURE SIMILAR TO THE DIAGRAM BELOW (REDUCES BOTTOM THREAD BREAKAGE)
MACHINE IS NEW, MADE TO ORDER
LEAD TIME: 10 DAYS

L-6683 DOUBLE BELT COMPRESSION THERMOBONDING OVEN SYSTEM 6000mm X 3300mm WIDE

INCLUDING:

THERMOBONDING OVEN
- DOUBLE COMPRESSION CONVEYORS SYSTEM SINGLE PASS
- DOUBLE BELT SOFT & HARD WADDING OVEN (6000mm LONG)
WORKING WIDTH: 3300mm
LENGTH OF HEATING CHAMBER: 6000mm
PANELS ARE 100mm THICK
TEMPERATURE INSIDE: UP TO 220 C
GAS BURNER 25 CUBIC METER PER HOUR DEPENDING ON MATERIAL THICKNESS
TWO GAS BURNERS ONE ON EACH SIDE 80 START AND 25 RUN CBM/H WITH MAINLINE 2 INCH
REDUCED TO 1” AT BURNER, PRESSURE 10 TO 15 KPascal
TWO HOT AIR FANS 22 KW EACH
ONE EXHAUST FAN 5.5 KW
WORKING SPEED: 1 TO 8 METERS PER MINUTE
DOUBLE TEFLON BELT WITH SINGLE PASS, WEAVE IS 2mm X 2mm
SUCTION HOOD AT THE ENTRANCE
THICKNESS OF FINAL PRODUCT 20 TO 150mm DEPENDING

COOLING UNIT
- FOUR COOLING PRESS ROLLERS 200mm diameter , 10mm shell thickness, with chiller
12,000 watt output power , input power 5700 watt , capacity 65 liter per minute
WORKING WIDTH: 3300mm
- LENGTHWISE CUTTER – 7 KNIVES ,pneumatically activated , BLADE DIAMETER 650mm
-SINGLE MOTOR
- MOVABLE SIDEWAYS
- CROSS CUTTER 2.2 KW MOTOR . UP TO 4 CUTS PER MINUTE
MAXIMUM LENGTH 2000mm
WORKING WIDTH: 2800mm
PVC CONVEYOR AT THE EXIT

ELECTRICAL CONTROL SYSTEM
-ELECTRICAL CABINET UL COMPONENTS

QUANTITY: 1

REFERENCE NUMBER: T-1207

MONTI TYPE CA 2-989 MODEL 12-148-1 AUTOMATIC SEWING LINE, WIDTH 2000mm, YEAR 2001

MONTI TYPE CA 2-989 MODEL 12-148-1 AUTOMATIC SEWING LINE

WIDTH 2000mm

FABRIC FEEDING FOLD-ROLL-SMALL ROLL (WITH DIAMETER 500mm MAX)

FABRIC EXIT: BIG ROLL (DIAMETER 1800mm MAX)

WINDING SPEED: 150 MT/MIN. ENTRANCE

QUANTITY: 1

REFERENCE NUMBER: L-5589

WERNER LEHARA APV INDIRECTLY FIRED CONVECTION OVENS, 3 ZONES, 150 FEET LONG

MODEL: APV

WITH SOLID BAKING BAND (SANDVIK)

150 FEET LONG

QUANTITY: 2

REFERENCE NUMBER: L-4034

LONG SHEET FOAM PEELING MACHINE- 2300 mm X 60 METERS LONG – NEW

CUTTING WIDTH: 2300mm

CUTTING HEIGHT: 1300mm (51 inches) (beginning bun height)

CUTTING SPEED: 0 TO 60 METERS PER MINUTE

CUTTING THICKNESS: 2 TO 60mm

REFERENCE NUMBER: M-7902

TETRA PAK TBA 19 250ML PRISMA FILLING LINE

1- PRISMA FILLING LINE

MAKE: TETRA PAK

MODEL: TBA 19 250ML

WORKING HOURS: ONLY 6,000

QUANTITY: 1 LINE

REFERENCE NUMBER: M-7908

TETRA PAK A3/FLEX PRISMA 500ML FILLING MACHINE YEAR 2004

FILLING MACHINE

MAKE: TETRA PAK

MODEL: A3/FLEX

VOLUME: 500ML PRISMA

YEAR: 2004

WORKING HOURS: 7,700 HOURS

REFERENCE NUMBER: M-7882

TETRA PAK A/3 FLEX 100V ASEPTIC FILLING LINE, 1000ML SLIM, YEAR 2004

ASEPTIC FILLING LINE

1000ML SLIM

MAKE: TETRA PAK

MODEL: A/3 FLEX 100V

WITH DIMC (100V AND FIRST GENERATION):

YEAR: 2004

VERSION: 100V

PRODUCTION HOURS: 43,156

CAP TYPE: LIGHT CAP

CONDITION: USED

QUANTITY: 1

REFERENCE NUMBER: R-8152
FLORIGO AC300 POTATO CRISP LINE YEAR 1994
FLORIGO POTATO CRISP LINE, MANUFACTURED BY FLORIGO
FLORIGO MODEL AC300, YEAR 1994
QUANTITY: 1