Search results for: 'a-2500'

YY-1952 TRÜTZSCHLER/HERGETH/SCHOTT & MEISSNER THERMOBOND LINE, WORKING WIDTH 2500mm DETAILS: WORKING WIDTH: 2500mm YEAR: 1995 TO 1998 VOLTAGE: 380 VOLTS, 3-PHASE, 50 Hz COMPLETE THERMOBONDING LINE MAXIMUM SPEED 15 METERS PER MINUTE CAPACITY UP TO 300 GSM, THROUGHPUT UP TO 300 KG PER HOUR DEPENDING ON TYPE OF FIBER CURRENTLY RUNNING A BLEND OF COTTON AND VISCOSE Learn More

J-5196 ASSELIN, FEHRER, THIBEAU NEEDLE PUNCHED CARPET LINE, YEAR 1986 QUANTITY: 1 Learn More

REFERENCE NUMBER: T-6843 SPINNBAU NONWOVEN LINE, YEAR 1994 BRAND: SPINNBAU SHORT DESCRIPTION: NONWOVEN LINE YEAR: 1994 NONWOVEN LINE CONSISTING OF 1. CARD FEEDING: CARD FEEDING R&S, NEW, IN 2500mm WORKING WIDTH, CONSISTING OF: ONE R&S MATERIAL BIN IN 2500mm WORKING WIDTH, 600mm DEPTH AND A COMPLETE HEIGHT OF 2500mm, WITH TOP AND BOTTOM WINDOW AT BOTH SIDES, FILLING LEVEL CONTROLLED BY IN HEIGHT ADJUSTABLE INFRARED DEVICES. ONE DOOR AT THE BACKSIDE FOR CLEANING, LOCKED BY SECURITY SWITCHES. THE VITIATED AIR ESCAPES THROUGH THE PERFORATED SHEETMETAL AT THE TOP. THESE AREAS ARE COMPLETELY COVERED, THE OUTGOING AIR CAN BE FILTERED BY AN EXCISTING FILTERSTATION OR OPTIONALLY BY FILTERBAGS, 2 DELIVERY ROLLERS. ONE R & S CHUTE FEEDER IN 2500mm WORKING WIDTH CONSISTING OF: ONE OPENING ROLLER DIAMETER 450mm, ONE VIBRATION CHUTE, FIBRELEVEL CONTROLLED BY ULTRASONIC, CHUTE ADJUSTABLE OVER TOOTH RAILS IN DEPTH FROM 80 TO 240mm, TWO DRAWING OFF ROLLERS, ONE FEEDING TABLE WITH TRANSILON BELT, PREPARED FOR SERVOLAP. DRIVES: DELIVERY ROLLERS: AC -GEARBOXMOTOR 0.55 KW, FC OPENING ROLLER: AC-MOTOR 2.2 KW VIBRATION: AC-GEARBOXMOTOR, 0.55 KW, FC FEEDING TABLE: AC-GEARBOXMOTOR, 0.55 KW, FC 2. CARDING; ONE SPINNBAU DOUBLE DOFFER CARD, IN 2500mm WORKING WIDTH, YEAR 1994: CARD, FOLLOWING EQUIPPED: 1 CYLINDER FEEDING DEVICE WITH FEED PLATE: 1 FEED ROLLER DIAMETER 159mm 1 LICKER-IN DIAMETER 292mm PRE-OPENING: 1 BREAST DIAMETER 412mm 1/1 WORKER/STRIPPER DIAMETER 213/118mm 1 INTERMETE ROLLER DIAMETER 412mm CARD: 1 MAIN CYLINDER DIAMETER 1500mm 5/5 WORKERS/STRIPPERS DIAMETER 213/118mm 1 DOFFER, TOP DIAMETER 550mm 1 DOFFER, BOTTOM DIAMETER 550mm 2 CONDENSING ROLLERS TOP DIAMETER 292mm TOP DRAWING OFF DEVICE, NEW: 1 DRAWING OFF ROLLER/WIRED DIAMETER 159mm 1 DRAWING OFF ROLLER/STEEL RUBBER: DIAMETER 159mm 1 CLEANING ROLLER WITH INTEGRATED ELECTRONIC, WHEN DIAMETER OF CLEANING IS GETTING BIGGER, CARD WILL STOP. BOTTOM DRAWING OFF DEVICE, NEW: 1 DRAWING OFF ROLLER/WIRED DIAMETER 159mm 1 DRAWING OFF ROLLER/STEEL RUBBER: DIAMETER 159mm 1 CLEANING ROLLER WITH INTEGRATED ELECTRONIC, WHEN DIAMETER OF CLEANING IS GETTING BIGGER, CARD WILL STOP. DRAWING OFF TABLES: TOP TRANSILON BELT BOTTOM: TRANSILON BELT COVERS: THE CARD HAS COVERS TO CLAP UP AND DOWN (SECURED WHEN CLAPPED UP), THE SIDES ARE FULLY COVERED AND ELECTRONICALLY LOCKED. RIGID WIRE: ONE COMPLETE SET OF RIGID WIRE, MOUNTED, FOR FIBRES 1.5 DTEX - 17 DTEX, CAPACITY UP TO 800 KG/H ELECTRIC: VOLTAGE: ~400 V AC, 3 PHASES CONTROL VOLTAGE: ~220 V AC, =24V DC FREQUENCY: 50 Hz COLOUR: MACHINE: RAL 5015/ 9001 (IF YOU LIKE WE CAN CHANGE) CONTROL CABINET: RAL 7032, GREY SWITCH BOARD: RAL 7032, GREY ELECTRICAL DRIVES: FEED ROLLER: 1 AC GEARBOXMOTOR, FREQUENCY CONTROLLED LICKER-IN: MECHANICAL FROM BREAST BREAST: 1 AC GEARBOXMOTOR, FREQUENCY CONTROLLED WORKERS BREAST: MECHANICALLY FROM BREAST INTERMEDIATE ROLLER: MECHANICALLY FROM MAINSWIFT MAIN SWIFT: 1 AC-MOTOR FREQUENCY CONTROLLED WORKERS: 1 AC GEARBOXMOTOR, FREQUENCY CONTROLLED DOFFERS: 2 AC GEARBOXMOTORS. FREQUENCY CONTROLLED CONDENSING ROLLERS: 1 AC GEARBOXMOTORS. FREQUENCY CONTROLLED DRAWING-OFF DEVICES: 2 AC GEARBOXMOTORS. FREQUENCY CONTROLLED DRAWING-OFF TABLES: 2 AC GEARBOXMOTORS, FREQUENCY CONTROLLED SWITCHBOARDS AND CONTROLS: SWITCHBOARDS RITTAL SERIES, COMPLETE WIRED. SWITCHBOARDS WITHOUT COOLING DEVICES. CONTROL CABINET OPERATION WITH COLOURED SCREEN, FITTED IN CONTROL CABINET OPERATED BY SIEMENS SPS S7-300 1 SET OF CABLE MATERIAL: FOR 20 MTR LENGTH BETWEEN MACHINERY AND SWITCHBOARD WITHOUT INSTALLATION MATERIAL ERECTION AND STARTING UP: IS NOT INCLUDED, SHOULD BE MADE BY US FOUNDATION: ONE FOUNDATION IN 750mm HEIGHT, WITH SIDEWALKS AROUND, TWO STEPS ON EACH SIDE. SUCTION: CONNECTION FOR THE DOFFER AND TOP OF CARD 3. CROSSLAPPING, NEW: ONE REISKY & SCHLESE CROSSLAPPER, TYPE RS 100 IN 2500mm WORKING WIDTH (BELT WIDTH 2800mm) AND 2500mm LAPPING WIDTH (BELT WIDTH 2700mm) MAX INFEEDING SPEED: 100 MTR/MIN, DELIVERY SPEED OF DRAWING OFF TABLE: FROM 0 TO 20 MTR/MIN, CONSISTING OF: ONE FEEDING TABLE IN 1000mm LENGTH MOUNTED IN IT'S OWN FRAME, ADJUSTABLE IN THE HEIGHT ACCORDING TO THE DOFFER, FURTHER THE COMPLETE FEEDING TABLE CAN BE MOVED UP IF THE DOFFER HAS TO BE DRAWN BACK. THE CROSSLAPPER ITSELF GUIDES THE WEB FROM THE INFEED DOWN TO THE OUTLET BETWEEN THE CONVEYORS, WHICH HAVE ANTISTATIC PROPERTIES. THE TENSION AND THE DISTANCES BETWEEN THEM CAN BE ADJUSTED ACCORDING TO THE DIFFERENT FIBRES. THE CONVEYORS ARE EQUIPPED WITH AUTOMATIC EDGE GUIDES, SO THAT THEY ARE RUNNING IN THE CENTRE. THE LAID WEB IS COVERED BY THEM. THE SERVO- DRIVES ARE RESPONSIBLE FOR THE PERFECT SYNCHRONISATION AND THE EXACT REVERSAL OF THE CARRIERS. THE SWITCHBOARD IS EQUIPPED WITH A COULOURED TOUCHSCREEEN, WHERE ALL NECESSARY PARAMETERS CAN BE PROGRAMMED, ALSO DIFFERENT CURVES FOR STORING THE WEB DURING REVERSALS. DRIVES: FEED TABLE: AC-SERVO-MOTOR BELT 1: AC-SERVO-MOTOR BELT 2: AC-SERVO-MOTOR TOP CARRIER: AC-SERVO-MOTOR BOTTOM CARRIER: AC-SERVO-MOTOR DRAWING OFF TABLE: AC-SERVO-MOTOR HEIGHT DRAWING OFF TABLE LEFT: AC-LINEARMOTOR HEIGHT DRAWING OFF TABLE RIGHT: AC-LINEARMOTOR OPERATION: BY COLOURED TOUCHSCREEN, SIEMENS IN CONTROL CABINET OF CARD. PARAMETERS: MANUEL / INLINE INFEED SPEED DRAFT (INFEED SPEED/LAYING SPEED) NUMBER OF LAPS LAPPING WIDTH FROM MIDDLE TO THE LEFT AND TO THE RIGHT DRAWING OFF SPEED AUTOMATICALLY SHOWN DEPENDING ON LAYERS DARWING OFF TABLE HEIGHT LEFT / RIGHT LAYING SPEED RECEIPES FAULT SHOWING SWITCHBOARD AND ELECTRONIC DEVICES: SWITCH BOAD RITTAL, COMPLETE WIRED. SWITCHBOARD WITHOUT COOLING DEVICE. CONTROL PANNEL RITTAL. CONTROLLED BY S7 SIEMENS 10000mm OF CABLES BETWEEN SWITHBOARD AND MACHINE/CONTROLPANEL QUANTITY: 1 Learn More

TT-3258 COGNETEX RINGFRAMES FLC7L WITH 608 SPINDLES EACH, YEAR 1993 TO 1996 COGNETEX RINGFRAMES FLC7L ITEM 001 COGNETEX RINGFRAMES FOR WORSTED MODEL FTC7L, YEAR 1993 QUANTITY: 8 ITEM 002 COGNETEX RINGFRAME FOR WORSTED MODEL FTC7L, YEAR 1993 QUANTITY: 1 ITEM 003 COGNETEX RINGFRAMES FOR WORSTED MODEL FTC7L, YEAR 1996 QUANTITY: 1 ITEM 004 COGNETEX RINGFRAMES FOR WORSTED MODEL FTC7L, YEAR 1996 QUANTITY: 2 ITEM 005 COGNETEX RINGFRAMES FOR WORSTED MODEL FTC7L, YEAR 1996 QUANTITY: 1 ITEM 006 COGNETEX RINGFRAMES FOR WORSTED MODEL FTC7L, YEAR 1996 QUANTITY: 2 Learn More

REFERENCE NUMBER: T-6845 EDELMANN, SPINNBAU, TRUTZSCHLER NONWOVEN THERMOBONDING LINE, WORKING WIDTH 2500mm, YEAR 1993 TO 1994 BRAND: EDELMANN, SPINNBAU, TRUTZSCHLER SHORT DESCRIPTION: NONWOVEN THERMOBONDING LINE YEAR: 1993 TO 1994 NONWOVEN THERMOBONDING LINE WORKING WIDTH 2500mm BRAND: TRUTZSCHLER, SPINNBAU, RAMISCH KLEINEWEFERS, EDELMANN CONSISTING OF: 1X TRUTZSCHLER OPENING AND BLENDING LINE, YEAR 1993 1X TRUTZSCHLER FBK FEEDER, WORKING WIDTH 2000mm, YEAR 1994 1X TRUTZSCHLER FBK FEEDER, WORKING WIDTH 2500mm, YEAR 1994 1X SPINNBAU DOUBLE DOFFER RANDOM CARD, WORKING WIDTH 2500mm, YEAR 1994 2X RAMISCH KLEINEWEFERS HYDRAIN CALANDER, WORKING WIDTH 2500mm, YEAR 1994 1X EDELMANN SLITTING AND WINDING STATION, WORKING WIDTH 2500mm, YEAR 1994 QUANTITY: 1 Learn More

T-9585 NEEDLING LINE, WORKING WIDTH 2500mm, YEAR 1986 NEEDLING LINE YEAR: 1986 WORKING WIDTH: 2500mm QUANTITY: 1 Learn More

REFERENCE NUMBER: K-8437 THIBEAU CARD CA5 2 DOFFERS WIDTH 2500mm YEAR 1984 MAKE: THIBEAU TYPE: CA5 MACHINE: CARDING 2 DOFFERS EQUIVALENT TO CA6 PP WIDTH: 2500mm YEAR: 1984 QUANTITY AVAILABLE: 1 Learn More

TT-3253 BONINO TURBO CARD LINE FOR THERMOBONDED NONWOVENS, WIDTH 2500mm, YEAR 2006 TO 2011 BONINO COMPLETE TURBO CARD LINE FOR THERMOBONDED NONWOVENS FOR FURNITURE INDUSTRY FINAL PRODUCT: THERMOBONDED NONWOVENS WEIGHT 60 TO 1000 G/M2 WIDTH 2500mm HEIGHT UP TO 100mm RAW MATERIAL: POLYESTER FIBERS 6-15 DTEX. Learn More

REFERENCE NUMBER: T-6855 AUTEFA, DILO, SPINNBAU COMPLETE NONWOVEN LINE BRAND: AUTEFA, DILO, SPINNBAU SHORT DESCRIPTION: COMPLETE NONWOVEN LINE ITEM 001 SINGLE DOFFER CARD BY “BESSI” - ITALY YEAR 1966 - WORKING WIDTH 2500mm - HOPPER-FEEDER WITH SCALE (WEIGHPAN) AND TOP SILO - INLET UNIT WITH ROLLERS - BREAST UNIT DIAMETER 1500mm WITH 3 PAIRS WORKERS/ STRIPPER (ORIGINALLY EQUIPPED WITH 5 PAIRS, UNUSED 2 PAIRS STILL AVAILABLE) - FANCY ROLL - TRANSPORT ROLL DIAMETER 1200mm - SWIFT DIAMETER 1500mm WITH 3 PAIRS WORKERS/ STRIPPER (ORIGINALLY EQUIPPED WITH 5 PAIRS, UNUSED 2 PAIRS STILL AVAILABLE) - DOFFER DIAMETER 1500mm WITH FLY-COMB - FLEXIBLE AND RIGID METALLIC WIRES IN EXCELLENT CONDITIONS QUANTITY: 1 ITEM 002 CROSS-LAPPER BY “MAK-AUTEFA” - GERMANY MODEL 101-42 YEAR 1965 - INLET WORKING WIDTH 2500mm - EXIT WORKING WIDTH 3000mm QUANTITY: 1 ITEM 003 PRE-NEEDLER BY “DILO” - GERMANY MODEL NFZ 3000 YEAR 1967 - WORKING WIDTH 3000mm - 2 NEEDLE BOARDS WITH TOTALLY 3000 NEEDLES / LIN MT - WITH BATT INLET UNIT QUANTITY: 1 ITEM 004 FINISH NEEDLERS BY “DILO” MODEL OD II 25 YEAR 1979 EACH - WORKING WIDTH 2500mm EACH - EACH ONE WITH 2 NEEDLE BOARDS WITH TOTALLY 5000 NEEDLES / LIN MT QUANTITY: 2 ITEM 005 TRANSVERSAL CUTTER BY “SPINNBAU-AUTEFA” - GERMANY. YEAR 1973 - WORKING WIDTH 2500mm QUANTITY: 1 ITEM 006 LONGITUDINAL CUTTER ITALIAN MAKE + ROLL WINDER ITALIAN MAKE ON ELECTRONIC WEIGHTING CELLS. WORKING WIDTH 2500mm QUANTITY: 1 ITEM 007 ROLLS LIFTING CRANE QUANTITY: 1 ALL ELECTRIC MOTORS AND CONTROL PANELS 400 V / 50 Hz Learn More

M-6056 TRUTZSCHLER/SPINNBAU/KLEINEWEFERS/EDELMANN THERMOBONDING PRODUCTION LINE, WIDTH 2500mm, YEAR 1993

OFFER 001
THERMOBONDING PRODUCTION LINE
MAKE: TRUTZSCHLER, SPINNBAU, RAMISCH KLEINEWEFERS, EDELMANN
YEAR: 1993
WORKING WIDTH: 2500mm

OFFER 002
TRUTZSCHLER OPENING AND BLENDING LINE
YEAR: 1993

OFFER 003
TRUTZSCHLER FEEDER
WORKING WIDTH: 2500mm
YEAR: 1993

OFFER 004
SPINNBAU CARDING
WORKING WIDTH: 2500mm
YEAR: 1993

OFFER 005
DOUBLE DOFFER CARD
QUANTITY: 1

OFFER 006
RAMISCH KLEINEWEFERS CALANDER
WORKING WIDTH: 2500mm
YEAR: 1993

OFFER 007
EDELMANN CUTTING AND WINDING
WORKING WIDTH: 2500mm
YEAR: 1993

QUANTITY: 1 LINE

Learn More