Search results for: 'finishing'
- Related search terms
- Finishing padder
- Finishing padde
-
J-5305 FINISHING PLANT FOR WORSTED AND WOOLENJ-5305 FINISHING PLANT FOR WORSTED AND WOOLEN SPLIT SALE POSSIBLE Learn More -
TT-5631 COMPLETE WEAVING AND FINISHING MILL FOR THE PRODUCTION OF DECORATIVE FABRICS, CURTAINS AND SUN PROTECTION, YEAR 1986 TO 2019TT-5631 COMPLETE WEAVING AND FINISHING MILL FOR THE PRODUCTION OF DECORATIVE FABRICS, CURTAINS AND SUN PROTECTION, YEAR 1986 TO 2019 Learn More -
J-5183 TRUETZSCHLER MODEL HSR 1000 FINISHING DRAW FRAMES WITH 24 x 48 CAN CHANGERJ-5183 TRUETZSCHLER MODEL HSR 1000 FINISHING DRAW FRAMES WITH 24 x 48 CAN CHANGER MAKE: TRUETZSCHLER MODEL: HSR 1000 QUANTITY: 13 Learn More -
TT-4302 COMPLETE WOOL WEAVING AND FINISHING PLANT, 2200mm TO 2900mm, YEAR 1991 TO 2003TT-4302 COMPLETE WOOL WEAVING AND FINISHING PLANT, 2200mm TO 2900mm, YEAR 1991 TO 2003 Learn More -
TT-1237 MCS/POZZI/ANGLADA/BRAZZOLI/OMEZ/MASTER/DETTIN TERRY TOWEL FABRIC & CONE DYEING AND FINISHING, YEAR 1970 TO 2011TT-1237 MCS/POZZI/ANGLADA/BRAZZOLI/OMEZ/MASTER/DETTIN TERRY TOWEL FABRIC & CONE DYEING AND FINISHING, YEAR 1970 TO 2011 ITEM 001 MCS PANDORA OVERFLOW FOR DYEING TERRY FABRIC QUANTITY: 2 ITEM 002 MCS PANDORA OVERFLOW FOR DYEING TERRY FABRIC QUANTITY: 2 ITEM 003 POZZI HIDROEXTRACTOR X TERRY FABRIC QUANTITY: 1 ITEM 004 ANGLADA TUMBLER DOUBLE FOR TERRY TOWEL. QUANTITY: 1 ITEM 005 BRAZZOLI OVERFLOW X SAMPLE 1 TUBE QUANTITY: 1 ITEM 006 OMEZ MACHINE FOR IMPREGNATION TERRY QUANTITY: 1 ITEM 007 POZZI KITCHEN COLOR QUANTITY: 1 ITEM 008 MASTER BM 150 QUANTITY: 1 ITEM 009 MASTER BM 300, KG 490 QUANTITY: 1 ITEM 010 MASTER BM 600 QUANTITY: 1 ITEM 011 DETTIN IDROEXACTOR QUANTITY: 1 ITEM 012 CONE BENDER QUANTITY: 1 STATUS: STILL RUNNING. DELIVERY: AFTER 30 DAYS AFTER ORDER CONFIRMATION DATE Learn More -
J-4286 DILO FINISHING NEEDLE LOOM, WORKING WIDTH 2500mm, STROKE 60mmJ-4286 DILO FINISHING NEEDLE LOOM, WORKING WIDTH 2500mm, STROKE 60mm QUANTITY: 1 Learn More -
YY-1826 DILO DI-LOOM OUG II 60 FINISHING NEEDLE LOOM, YEAR 1996, WORKING WIDTH 6000mmYY-1826 DILO DI-LOOM OUG II 60 FINISHING NEEDLE LOOM, YEAR 1996, WORKING WIDTH 6000mm WITH DILO CROSS CUTTING AND WINDING UNIT QUANTITY: 1 Learn More -
J-2640 DYEING AND FINISHING PLANT FOR SALEREFERENCE NUMBER: J-2640
DYEING AND FINISHING PLANT FOR SALEITEM 001
THIES SAMPLE DYEING MACHINE
MODEL: MINISOFT SAMPLE
CAPACITY: 50 KGS
YEAR: 1999
MICROPROCESSOR CONTROLLED
VOLTAGE: 460 VOLTS, 3-PHASE, 60 Hz
SINGLE ADD TANK WITH MIXER
HEAT EXCHANGER
ALL PUMPS AND MOTORS
LOADING REEL AND FABRIC EXIT PLAITOR
QUANTITY: 1ITEM 002
THIES DYEING MACHINE
MODEL ECOSOFT PLUS
3 PORT SPLIT/SPLIT
CAPACITY: 900 KGS
YEAR: 1999
MICROPROCESSOR CONTROLLED
VOLTAGE: 460 VOLTS, 3-PHASE, 60 Hz
SINGLE ADD TANK WITH MIXER
HEAT EXCHANGER
ALL PUMPS AND MOTORS
LOADING REEL AND FABRIC EXIT PLAITOR
QUANTITY: 1ITEM 003
THIES DYEING MACHINE
MODEL: ECOSOFT PLUS
2 PORT SPLIT/SPLIT
CAPACITY: 600 KGS
YEAR: 1999
MICROPROCESSOR CONTROL
VOLTAGE: 460 VOLTS, 3-PHASE, 60 Hz
SINGLE ADD TANK WITH MIXER
HEAT EXCHANGER
ALL PUMPS AND MOTORS
LOADING REEL AND FABRIC EXIT PLAITOR
QUANTITY: 1ITEM 004
THIES DYEING MACHINE
MODEL ECOSOFT PLUS
1 PORT SPLIT/SPLIT
CAPACITY: 300 KGS
YEAR: 1999
MICROPROCESSOR CONTROLLED
VOLTAGE: A460 VOLTS, 3-PHASE, 60 Hz
SINGLE ADD TANK WITH MIXER
HEAT EXCHANGER
ALL PUMPS AND MOTORS
LOADING REEL AND FABRIC EXIT PLAITOR
QUANTITY: 1ITEM 005
GASTON COUNTY DYEING MACHINE
MODEL: AQUAFLOW
2 PORT
CAPACITY; 250 KGS
YEAR: 1987
MICROPROCESSOR CONTROLLED
VOLTAGE: 460 VOLTS, 3-PHASE, 60 Hz
SINGLE ADD TANK WITH MIXER
HEAT EXCHANGER
ALL PUMPS AND MOTORS
LOADING AND UNLOADING REEL
QUANTITY: 1ITEM 006
THIES DYEING MACHINE
MODEL: SOFT TRD
2 TUBE
CAPACITY: 700 KGS
YEAR: 1999
MICROPROCESSOR CONTROLLED
VOLTAGE: 460 VOLTS, 3-PHASE, 60 Hz
SINGLE ADD TANK WITH MIXER
HEAT EXCHANGER
ALL PUMPS AND MOTORS
LOADING REEL AND FABRIC EXIT PLAITOR
QUANTITY: 1ITEM 007 (also our J-2647)
LAFER OPEN WIDTH COMPACTOR MACHINE
MODEL: KSA 500 2400/2200
YEAR: 1998
LAFER TEXEN CONTROLS
VOLTAGE: 480 VOLTS, 3-PHASE, 60 Hz
COMPOSED OF:
• TENSION BAR ENTRY TO LATTICE ROLL GUIDER
• OPERATOR’S PLATFORM
• PUP TENTER WITH KNIT ENTRY, VERTICAL PIN CHAIN, WITH PLATE GUIDES, RAIL OPENING, PINNING BRUSHES, PINS ONLY, WITH SUPPORT SECTION FOR THE FABRIC IN THE CENTER, AT 10’ THERE IS A STEAMING SECTION, TOTAL LENGTH OF THE TENTER IS 30’, WITH AUTOMATIC LUBRICATION FOR THE CHAIN
• KSA 500 COMPACTOR BENCH WITH TEXEN CONTROLS
• TENSIONLESS FABRIC CONVEYOR
• PLAITOR AND FABRIC SCRAY WITH OPTICAL LOAD SENSOR
• INLINE INSPECTION BATCHER MACHINE, WITHH A BACK LIGHTED BOARD, MANUAL CUT
• SCALE TO WEIGHT THE FABRIC
QUANTITY: 1ITEM 008 (also our J-2648)
SANTEX TUBULAR 4-ROLL EXTRACTION PAD
MODEL: SANTASTRETCH PLUS 140
YEAR: 1998
COMPOSED OF TURNTABLE, DETWISTER, TUBULAR 4-ROLL PAD WITH WET SPREADERS, PLAITOR
WITH ADDITION TANKS FOR SOFTENER
REEL FABRIC PLAITOR EXIT
VOLTAGE: 460 VOLTS, 3-PHASE, 60 Hz
QUANTITY: 1ITEM 009
SANTEX CONVEYOR DRYER FOR OPEN WIDTH AND TUBULAR FABRIC
MODEL: SANTASHRINK 4/5240
YEAR: 1998
SANTEX CONTROLS
VOLTAGE: 460 VOLTS, 3-PHASE, 60 Hz
COMPOSED OF:
• TENSION BAR ENTRY TO LATTICE ROLL GUIDER TO
• (2) SANTEX 2-ROLL PADS, RUBBER OVER RUBBER, 102” WIDE x 12” DIAMETER, STAINLESS STEEL PAN, 10-TON PAD, SWING-AWAY PAN, TENSION BAR WITH 2 STAINLESS STEEL MIXING TANKS, 75 GALLONS EACH
• DRIVEN SCROLL ROLLS WITH EDGE GUIDE CONTROL, WIDTH 95”
• OPERATOR’S PLATFORM
• PUP TENTER WITH KNIT ENTRY 45°, YEAR 1998, VERTICAL PIN CHAIN, 30’ LONG WITH TANDEMATIC PLATE GUIDES, RAIL GUIDES, PINNING BRUSHES, GUIDE SUPPORT FOR THE FABRIC, FABRIC CONVEYOR TO ENTER BOTH TUBULAR OR OPEN WIDTH FABRIC TO
• CONVEYOR DRYER 100” WIDE, 5 ZONES, 3-PASS WITH MAXON BURNERS, 5 CIRCULATING FANS TO CONVEYOR BELT TO PLAITOR
• ALL MOTORS AND SANTEX CONTROLS AND MONITORS
QUANTITY: 1ITEM 010
SANTEX AG TUBULAR COMPACTOR MACHINE
MODEL: SANTASPREAD 140
YEAR: 1998
SANTEX CONTROLS
VOLTAGE: 460 VOLTS, 3-PHASE, 60 Hz
COMPOSED OF:
• TENSIONS BAR ENTRY
• OPERATOR’S PLATFORM
• TENSION DEVICE
• DRIVEN SPREADER BARS
• STEAMING DEVICE
• TUBULAR COMPACTING BENCH
• FELT BLANKET ONTO THE CONVEYOR BELT
• PRECISION PLAITOR
• TABELTOP ELECTRONIC SCALE
QUANTITY: 1ITEM 011
COMET NAPPER
MODEL: PEGSO-X4
YEAR: 1998
VOLTAGE: 480 VOLTS, 3-PHASE, 60 Hz
24 ROLLS WITH TURNING BARS FOR TUBULAR 90” WIDE
XYCOM CONTROLS
12-BAG COLLECTION SYSTEM AND PLAITOR
YEAR: 1996
QUANTITY: 1ITEM 012
STENTEX TENTER FRAME
MODEL: STENTOTHERM 3300
YEAR: 1999
STENTEX CONTROLS
VOLTAGE: 480 VOLTS, 3-PHASE, 60 Hz
COMPOSED OF:
• TENSION ENTRY TO TEXT-STAR TYPE GUIDER TO 2 ROLL PAD
• ADDITION TANK TOP SCRAY PAD TO TEXT-STAR TYPE GUIDER
• TWO ROLL PAD R/R 10 TON
• OPERATOR’S PLATFORM
• WORKING WIDTH 1800mm
• HORIZONTAL PIN CHAIN, KNIT ENTRY
• TANDEMATIC SPLITLEVEL DECURLERS
• OVERFEED
• PINNING BRUSHES
• STEAM BOX
• RAIL GUIDERS, 20 FEET ENTRY, 8 ZONES
• 80 FEET HOUSING
• SCREEN MONITORS
• GAS FIRED, MAXON OVEPAK 408 BURNERS
• HONEYWELL CONTROLS
• 3 FEET COOLING ZONE
• 2 COOLING CANS, SELVEDGE TRIMMERS
• PLIATOR, SCRAY
• ZONE IN LINE INSPECTION BATCHER
QUANTITY: 1ITEM 013
ZIMMER ROTARY SCREEN PRINTING MACHINE
MODEL: R92-S153
YEAR: 1993
COMPOSED OF:
• TENSION BAR SKY ENTRY
• SCRAY
• CORINO BRUSH
• CORINO PRINT GUIDER
• ZIMMER PRINTER, 8 COLOR, 86” BLANEKT
• PRINT CONVEYOR DRYER, 30’ LONG, 3-ZONE, GAS FIRED
VOLTAGE: 460 VOLTS, 3-PHASE, 60 Hz
QUANTITY: 1ITEM 014
Learn More
SAFETY SWITCH BULLET NOSE SLITTER
MODEL: CUTTING
WITH REEL FABRIC PLIATOR
VOLTAGE: 460 VOLTS, 3-PHASE, 60 Hz
QUANTITY: 1 -
L-5512 COMPLETE WEAVING AND FINISHING PLANT FOR DENIM FABRICSREFERENCE NUMBER: L-5512
COMPLETE WEAVING AND FINISHING PLANT FOR DENIM FABRICS
IF INTERESTED, ASK FOR A COMPLETE LIST OF MACHINERY INCLUDED IN THIS PLANT
QUANTITY: 1 PLANT
Learn More -
P-4925 DILO OD II/25 FINISHING NEEDLE LOOM YEAR 1982 WIDTH 2500mm DOUBLE BOARD DOWNSTROKE 15,000 NEEDLESP-4925 DILO OD II/25 FINISHING NEEDLE LOOM YEAR 1982 WIDTH 2500mm DOUBLE BOARD DOWNSTROKE 15,000 NEEDLES
DILO
TYPE: OD II/25
FINISHING NEEDLE LOOM
YEAR: 1982
WORKING WIDTH: 2500mm
DOUBLE BOARD DOWNSTROKE
TOTAL 15,000 NEEDLESQUANTITY: 1
Learn More