Search results for: 'gas burner machine'

J-4145 DRYER FOR DOWN FEATHERS, 1 TON PER 8 HOUR SHIFT MANUAL LOADING OF FEATHERS REMOVAL OF FEATHERS IS DONE BY REVERSING THE ROTATION DIRECTION OF THE TURNING MOTOR, FEATHERS WILL EXIT THE MACHINE QUANTITY: 1 Learn More

P-5079 COMMERCIAL JOPER CAST IRON CRM-30 ROASTER 30 KILOS

WHAT WE HAVE HERE IS A VERY RUGGED CAST IRON ROASTING FRAME AND ROASTING CONTACT CLEARANCES WITH THE MACHINE - JUST PLAIN SOLID AND DOES NOT MOVE UNDER LONG OR EXTENDED USE. DOUBLE WALL DRUM MEANS THAT THE HEAT IS ALL DESIGNED TO GO THROUGH THE CENTER OF THE ROASTING CHAMBER, NOT "ONTO" THE DRUM EXTERIOR. TOTAL TRUE CONVECTION. NOT ONLY IS THIS THE SAME STYLE FROM THE OLD GOTHOT & BARTH ROASTER DAYS. . . BUT EVEN BETTER AS THE SHAFT DESIGN SO THAT BEARINGS ARE EXTERNALLY MOUNTED AND ADDITIONALLY ARE AIR COOLED FOR LONG LIFE AND TROUBLE-FREE CONTROL. EVEN THE SIDE PANELS OR PRODUCT FLIGHTS HAVE A LONGER CURVE POSITIONING MORE PRODUCT FLOW INTO THE HOT AIR STREAM, RESULTING IN A SLIGHTLY MORE RAPID ROAST WITH MORE EVEN BEAN INTERIOR AND EXPANSION THAT FRANKLY LEADS THE INDUSTRY.

ALL THIS COMMENTARY ABOVE MEANS THIS ROASTER SIMPLY IS MORE QUIET THAN ANYTHING ON THE MARKET. PERIOD. THERMAL INSULATION WITH HIGHEST QUALITY OF FIBER FOR LOW GAS CONSUMPTION; DIGITAL TEMPERATURE CONTROL. CYCLONE IS SEPARATE. THE COOLER, BEING TOTALLY SEPARATE ALSO HAS THE LARGEST AIR COLLECTION AREA OF ANY ROASTER MADE ALLOWING FOR TOTAL AMBIENT COOL COFFEE IN LESS THAN THREE MINUTES. ADD TO THIS PACKAGE A LOADER OR YOUR CHOICE OF DESTONERS AND EVEN YOUR CHOICE OF CONTROL METHODS.

DATA INFORMATION:
BATCH CAPACITY: 30 KG / 66 LBS
CONTROL DESIGN: MANUAL
CAPACITY PER HOUR: 120 KG / 265 LBS
ROASTING TIME: 12-18 MIN (4 BATCHES AN HOUR)
EXHAUST AIR TREATMENT: OPTIONAL
COOLING CYCLONE: OPTIONAL
PRE-COOLING WITH WATER IN DRUM: OPTIONAL
COOLING TIME: 3-4 MIN
TYPE OF COOLING: AIR AMBIENT
SAFETY DEVICE: YES
BURNER POWER: 110 KW / 375000 BTU
BURNERS MANUFACTURER: RIELLO
OPERATION TYPE BURNER: BS2D-2 STAGE
FUEL TYPE: PROPANE/NAUTRAL GAS/DIESEL
SIDE OF OPERATION: LEFT
POWER REQUIREMENTS: 20 AMP
VOLTAGE/FREQUENCY/PHASES: 400+N-230 V / 50-60 HZ / 3 PH
9 AMP. . . 3 PHASE 50/60 HZ PREFERRED, YOUR CHOICE OF 220/440 - SINGLE PHASE AVAILABLE AT SPECIAL REQUEST
(NOTE ON 3 PHASE. . . NOT ONLY IS IT LESS EXPENSIVE TO OPERATE, BUT IT RUNS MORE QUIETLY THAN SINGLE PHASE WHENEVER OR WHEREVER IT IS USED. KEEP THIS IN MIND FOR ANY MACHINERY.)
Ø EXHAUST CHIMNEY (ROASTER CYCLONE): 250MM / 9,8 INCH
Ø EXHAUST CHIMNEY (COOLER): 250MM / 9,8 INCH
Ø HOPPER ROAST CHIMNEY: 150MM / 5,9 INCH
ROASTER WEIGHT WITH CYCLONE: 1050 KG / 2310 LBS
COOLER WEIGHT: 300 KG / 660 LBS
ROASTER FAN MOTOR: 1, 5 HP
COOLER FAN: 4 HP
DRUM GEARBOX: 1 HP
COOLER GEARBOX: 0, 75 HP
BUILT TO UL295 STANDARDS.

QUANTITY: 1

Learn More

REFERENCE NUMBER: M-5546 (440YNTBHH3) L FABRIC DYEING MACHINERY (1) X STAND FOR FABRIC ROLLS 3X 17 MT (6) X DYEING CANS (1) X LINCOLN ELECTRIC WELDING EQUIPMENT (16) X FIRE EXTINGUISHING EQUIPMENT 10, 20 Y 30 LIBRAS (1) X ALARM (1) X HYDRANT WITH 2 HOSES (1) X WHEELED 10 STAGES STRUCTURE (3) X 5 MT3 STORAGE TANKS AND PENLIKE PUMP TO EXTRACT FROM DRILLED HOLE (1) X BOILER J. C. T. 100 BHP CONVERTED TO GAS AND ACPM (1) X SCALE IDEMA (1) X ELECTRONIC SCALE MIERTIER (1) X CENTRIFUGE FOR 100 KG (1) X COMPRESSOR SFM AT 7 HP (1) X COMPRESSOR AT 3 HP (1) X M. C. S. SOFT FLOW 400 KG MODEL 1993 (2) X BATCH DYEING FOR 80 Y 100 KG (2) X FABRIC INSPECTION DEVICE INSTALLATION AND MONTAGE OF GAS AND ELECTRICITY SYSTEMS (1) X BRUCKNER STENTER WITH WEFT STRAIGHTENING SYSTEM MAHLO AND FOULARD MAX GOLLER OF 3 CHAMBERS WITH 6 BURNERS OF 600,000 BTU EACH (1) X NON STOP MACHINE FOR FABRIC MODEL 2008 SERIES 0148-5 ALL MACHINES ARE RUNNING AT THE MOMENT TOTAL QUANTITY AVAILABLE: 43 Learn More

REFERENCE NUMBER: K-1016 SAMILL TENTER FRAME YEAR 2000 – 5 ZONES – 2000mm - GAS HORIZONTAL PIN CHAIN GAS HEATED - 10 BURNERS 5 ZONES 2000mm WIDE TWO PADS (FOULARD ) AT ENTRANCE ONE WEFT STRAIGHTENER FLAT FOLDER AND "A" FRAME WINDER AT EXIT MACHINE IS IN LIKE NEW CONDITION , OWNER USED IT ONLY FOR TESTING AND COULD NOT GET CONTRACT ON THE FABRIC SALES QUANTITY AVAILABLE : 1 Learn More

KRANTZ DOUBLE LAYER STENTER FRAME YEAR 1999 (2012 RENEWED) MAHLO WEFT STRAIGHTENER KRANTZ PADDER ENTRANCE J-BOX 1800mm WORKING WIDTH TOTAL INLET CHAMBER DISTANCE 54MT 12 ECLIPSE GAS BURNER ALL ELECTRICAL COMPONENTS RENEWED 2012 GAS HEATED ENTRANCE & EXIT AT THE SAME SIDE OF THE MACHINE (ONE OPERATOR SEES BOTH) SPACE NEEDED FOR FOUNDATION 28MT Learn More

REFERENCE NUMBER: K-9772 OSTHOFF-SENGE SINGEING MACHINE PK90 YEAR 1992 WIDTH 1800mm SINGEING MACHINE OSTHOFF-SENGE 5600 MODEL PK90 YEAR OF CONSTRUCTION: 1992 ROLLERS WIDTH: 2000mm USEFUL WORKING WIDTH: 1800mm SPEED FROM 20 TO 120 METERS PER MINUTE QUANTITY AVAILABLE: 1 Learn More

TT-2846 TEXIMA SINGEING MACHINE, WIDTH 2000mm, YEAR 1993 WITH FABRIC TENSIONER TEXIMA SINGEING MACHINE YEAR 1993 WIDTH 2000mm QUANTITY: 1 Learn More

TT-7719 UTECO ONYX 808 FLEXOGRAPHIC PRINTING MACHINE, WIDTH 1300mm, YEAR 2010 1. UTECO ONYX 808 FLEXOGRAPHIC PRINTING MACHINE 2. 8 COLORS 3. BRAND: UTECO 4. MODELLO: ONYX 808 5. YEAR: 2010 QUANTITY: 1 Learn More

TT-5218 REGGIANI FLAT PRINTING MACHINE, WORKING WIDTH 1800mm, YEAR 2001 REGGIANI FLAT PRINTING MACHINE YEAR 2001 TYPE: PRIMA QUANTITY: 1 Learn More

TT-1367 KERAJET DIGITAL PRINTING MACHINE, WORKING WIDTH 3400mm, YEAR 2020 AUTOMATIC EXTRACTION OF COLORS TO RECOVER IN 10 TANKS BY 30 LT EACH ONE STILL ON THE PLANT AT RUNNING CONDITION QUANTITY: 1 Learn More