Search results for: 'spinning machines'

REFERENCE NUMBER: A-2471 INDUSTRIAL ELECTROSPINNING MACHINE A MASS PRODUCTION MACHINE OF ELECTROSPINNING. ALUMINUM FRAME STRUCTURE MAKES IT POSSIBLE FOR EXTENDING DIFFERENT FUNCTIONS. THE SPINNERET USED IS MULTI-NEEDLE ARRAYS, FROM 64 TO 384 NEEDLES ARE EQUIPPED. THE LENGTH AND WIDTH CAN BE MADE ACCORDING TO CUSTOMER'S REQUIREMENT. ROLL TO ROLL COLLECTOR AND CONTINUOUS COLLECTOR CAN BE USED BASED ON THE THICKNESS OF REQUIRED FIBER SHEET. FOR SOLUTIONS, A MULTI-CHANNEL PUMP WILL BE SUPPLIED FOR LONG TIME PRODUCTION OR NONE-STOP PRODUCTION. FEATURES: － EQUIPPED WITH BOTH POSITIVE & NEGATIVE HIGH VOLTAGE SUPPLY DEVICES － EQUIPPED WITH UNWINDING & WINDING MACHINES － CONTINUOUS ELECTROSPINNING & WINDING － ALUMINUM ALLOY FRAME STRUCTURE, MULTI-FUNCTIONS EXPANSIBLE － MULTI-NEEDLES IN ARRAYS. 16 NEEDLES X N ROWS, UP TO 384 NEEDLES － SPINNERET MOVING MACHINERY ENSURES EVEN FIBER SHEET － ONLINE AUTO-CLEAN DEVICE FOR NEEDLES － THICKNESS OF THE FIBER SHEET IS CONTROLLABLE － CE & FCC CERTIFICATE SPINNERET STANDARD：16 NEEDLES X 8 GROUPS =128 NEEDLES (THE NUMBER OF NEEDLES CAN BE ADJUSTED FREELY ACCORDING TO THE REQUIREMENTS OF USE） X-Y-Z MOTION SYSTEM － THE NOZZLE CAN BE MOVED UP AND DOWN IN THE Z DIRECTION THROUGH THE TOUCH SCREEN CONTROL TO DETERMINE THE APPROPRIATE SPINNING DISTANCE. － THE NOZZLE CAN MOVE BACK AND FORTH ALONG THE YAXIS DIRECTION OF THE TANGENT DIRECTION OF THE RECEIVING FILM TO PREPARE A UNIFORM FIBER FILM. － THE NOZZLE AUTOMATIC ONLINE CLEANING DEVICE SCANS ALONG THE X-AXIS DIRECTION. COLLECTOR － STAINLESS STEEL PLATE / MESH SERVES AS A CARRIER FOR THE FIBER MEMBRANE SUBSTRATE. － CONNECTED WITH NEGATIVE HIGH VOLTAGE. － RECEIVER BOARD WIDTH: 500 mm － SPINNING DISTANCE: 80 TO 300 mm ADJUSTABLE WINDER AND UNWINDER － AUTOMATICALLY CALCULATE THE ROLL DIAMETER OF THE LOADED MATERIAL AND CONTROL THE TENSION BETWEEN THE UNWINDING AND SPINNING SECTIONS. － CONSTANT FEEDING SPEED. THE FEEDING SPEED RANGE IS 0 TO 5000 mm / min. － ONLINE HOT PRESSING FUNCTION MODULE. AFTER THE SPINNING IS COMPLETED, BEFORE THE WINDING, A TEMPERATURE-CONTROLLED HOT PRESSING DEVICE (ROOM TEMPERATURE TO 60 ° C) IS USED FOR HOT PRESSING. (OPTIONAL THIRD LAYER MATERIAL STICKING AND REWINDING DEVICE). － CAN BE OPERATED BY TOUCH SCREEN. － DO NOT USE METAL FILM AS THE RECEIVING CARRIER. SYRINGE PUMP － 200ML X 4N CHANNEL － FLOW RATE: 0.1ML / H TO 1280 ML / H － SPECIALLY DESIGNED FOR ELECTRO-SPINNING AND RESISTANT TO HIGH VOLTAGE. HIGH VOLTAGE DEVICE －0 TO 50KV, DIGITAL DISPLAY －-50KV ~ 0 KV, DIGITAL DISPLAY －OUTPUT CURRENT: <1 MA －CONTINUOUSLY ADJUSTABLE CONTROL SYSTEM －PLC CONTROL SYSTEM, 7-INCH TOUCH SCREEN. －CONTROL THE MOVEMENT OF THE NOZZLE. －CONTROL THE NOZZLE TO MOVE UP AND DOWN. －YOU CAN SET THE MOVEMENT TIME, STROKE AND SPEED OF THE NOZZLE. －CONTROL THE FREQUENCY OF NOZZLE CLEANING. －SPINNING PROCESS PARAMETER RECORDS. ENVIRONMENTAL CONTROL SYSTEM －PROVIDE INTERFACE TO LET IN DRY AMBIENT HUMIDITY AIR. －AN EXTERNAL DEHUMIDIFIER CAN BE USED TO CONTROL THE AMBIENT HUMIDITY. THE EXTERNAL DEHUMIDIFIER NEEDS TO BE SELECTED ACCORDING TO THE SIZE OF THE WORKSHOP. THIS EQUIPMENT DOES NOT INCLUDE THIS DEHUMIDIFIER. EXHAUST SYSTEM －BOTTOM UP, AND FOUR FANS ARE PUMPED AT THE SAME TIME. －THE DISCHARGE VOLUME OF A SINGLE UNIT IS 5 TO 150 M3 / H, AND THE RATE IS ADJUSTABLE. THE COMBINED DISCHARGE VOLUME OF THE TWO EXHAUST FANS IS 10 TO 300M3 / H. THE EXTRACTOR IS DRAWN FROM THE MIDDLE. IN THIS WAY, THE HIGH-SPEED AIR VENTILATION MINIMIZES THE RELATIVE DISTURBANCE TO THE SPINNING. THE EXHAUST FAN IS A SILENT EXHAUST FAN. SAFETY －AUTOMATIC POWER-OFF DEVICE FOR OPENING THE DOOR. －RESIDUAL STATIC ELECTRICITY REMOVAL DEVICE. －EMERGENCY STOP SWITCH. －GROUND AT MULTIPLE POINTS. －ALARM DEVICE AFTER THE CONTROL PARAMETERS EXCEED THE LIMIT. CHAMBER －THE CHAMBER IS MADE OF ALUMINUM ALLOY FRAME. －THE FRONT AND SIDE WINDOWS OF THE CABINET ARE MADE OF TEMPERED GLASS. －MULTI-POINT TEMPERATURE AND HUMIDITY COLLECTION AND DISPLAY. －THE PROCESS CAN BE OBSERVED WITH THE NAKED EYE. －AIR INLET: HOT AND DRY AIR CAN BE INTRODUCED TO QUICKLY ADJUST THE HUMIDITY INSIDE THE CHAMBER. POWER SOURCE －220 VOLTS AND 50/60 Hz －TOTAL POWER: 10KW NUMBER OF NEEDLES: 128 NEEDLES (THE NUMBER OF NEEDLES CAN BE ARBITRARILY REDUCED ACCORDING TO THE SOLVENT USAGE) FLOW RATE OF EACH NEEDLE: (~ 3ML ± 50%) / HOUR TOTAL FLOW OF THE WHOLE MACHINE: ABOUT (400ML ± 50%) / HOUR SOLUTION CONCENTRATION: 10 TO 20% 8 HOURS SOLUTION PROCESSING CAPACITY: ABOUT (3L ± 50%) / 8 HOURS SOLID CONTENT (WEIGHT OF FIBER PRODUCED): (300G ± 50%) / 8 HOURS ACCORDING TO THE APPROXIMATE PRODUCTION OF FIBER MATERIAL WITH A GRAM WEIGHT OF 2GSM. WINDING AND UNWINDING SPEED: 50M / H MATERIAL WIDTH: 0.5 METERS FABRIC AREA PRODUCED PER HOUR: 25 SQUARE METERS FABRIC AREA PRODUCED IN 8 HOURS: 200 SQUARE METERS FABRIC AREA PRODUCED IN 24 HOURS: 600 SQUARE METERS BASED ON THE PRODUCTION OF FIBER MATERIAL WITH A GRAMMAGE OF 0.02G / ㎡, APPROXIMATELY: WINDING AND UNWINDING SPEED: 5000M / H MATERIAL WIDTH: 0.5 METERS FABRIC AREA PRODUCED PER HOUR: 2500 SQUARE METERS FABRIC AREA PRODUCED IN 8 HOURS: 20,000 SQUARE METERS FABRIC AREA PRODUCED IN 24 HOURS: ABOUT 60,000 SQUARE METERS Learn More

P-4950 COMPLETE SPINNING PLANT – ZINSER – RIETER – FOR FIREPROOF THREAD

THIS SPINNING PLANT WAS COMPLETELY MODERNIZED IN 2008
PREPARED TO WORK FIREPROOF THREAD
THIS PLANT IS COMPLETED WITH ALL ITS MECHANISMS TO OPERATE AT THE TIME
HAS A MOISTURE CONDITIONER FOR THE ENTIRE FACTORY WITH WATER FILTERS AND DIFFERENT COMPARTMENTS WITH APPROXIMATELY 20M LONG AND 4M WIDE
IT ALSO HAS 2 CHAMBERS FOR DRYING THE YARN
THE PRODUCTION THICK YARNS TYPES AND TYPES OF MATERIAL THAT CAN WORK THIS SPINNING.
THE RELATIONSHIPS OF THE MACHINES:
1 BOILER VYC 12 BAR.
1 AUTOCLAVE TAINOX
1 ELECTRIC INDUSTRIAL SCALES
1 OPENING (RIETER)
1 CARDING RIETER
1 CARDING RIETER
1 DRAWING FRAME (24)
1 ROVING FRAME (24)
5 SPINNING FRAME G/01, ZINSER. (118X2 UNIT)
1 SPINNING FRAME G/01, RIETER (108X2 UNIT)
1 AUTOMATIC SCHLAFHORST AUTOCONER. ( 40 )
1 CENTRAL TEMPERATURE / HUMIDITY OF APPROX 20 M X 4 M.
2 CABINS DRYING.
1 FULL LAVORATORIO
2 COMPRESSORS (25 AND 30 HP)
1 DRYER
1 DEPOSIT OF AIR,
*ALL ACCESSORIES IN THE FACTORY.
STOCK ALSO NO THREAD IN LYCRA, ALSO MATERIALS IN BALES

QUANTITY: 1 COMPLETE PLANT

Learn More

REFERENCE NUMBER: M-4441 (1010HYGAHH9) K EXTRUSION LINES TYPE STM 16 BCF FOR THE PRODUCTION OF CARPET YARN YEAR 1991-1994 1 MACHINE YEAR 1991 1 MACHINE YEAR 1994 TEXTURIZING IS BARMAG JETS ONE LINE IS 3-COLOR OTHER LINE IS 4- COLOR ALSO INCLUDED: SPINNING PACKS (1 SET PLUS SPARE SET OF SPINNERETS), 132 FILAMENTS TRILOBAL SPARE WINDER WITH TEX JETS, ELECTRONIC PARTS AND MECHANICAL PARTS COOL SYSTEM WITH CHILLER ONE OVEN ONLY (FOR PREHEATING) QUANTITY AVAILABLE: 2 Learn More

REFERENCE NUMBER: G-3941 SAMPLE ROVING YARN-MAKING MACHINE MODEL: FDY-360F APPLICATIONS: THIS MACHINE IS MAINLY USED IN MAKING PROOF FOR WOOL TOP PLANT. IT CAN LOOSE AND CARD THE INITIALLY LOOSED WOOL, CASHMERE, AND BLENDED FABRIC MIXED WITH OIL. THEN A LAYER OF UNIFORM WOOL NET FORMS. THE SMALL WOOL TOPS ARE CUT AND SLUBBED INTO THE SAME WIDTH WITH A UNIFORM AND TIGHT BODY WHICH IS CALLED ROVING YARN. THE ROVING YARN IS USED ON SPINNING MACHINES. QUANTITY AVAILABLE: 1 Learn More

TT-4132 PROFESSIONAL ALPACA WOOL TOP MAKING SPINNING MACHINE, CAPACITY 40 TO 70 KG PER HOUR BRAND: PASEN CARDING MACHINES CONDITION: NEW QUANTITY: 1 Learn More

TT-3339 OPENING CARDING MACHINE SMALL WOOL COTTON YARN COMBING SPINNING MACHINE, CAPACITY 2 TO 8 KG PER HOUR, WIDTH 360mm BRAND: PENGHUI CARDING MACHINES CONDITION: NEW APPLICABLE INDUSTRIES: MANUFACTURING PLANT QUANTITY: 1 Learn More

REFERENCE NUMBER: C-2544 SUESSEN SPINNING MACHINE WITH 624 SPINDLES, DIAMETER 54mm, YEAR 1995 TO 2000 - PACKAGE DETAILS: SUESSEN SPINNING MACHINE MODEL: RING CAN 1000 YEAR: 1996 624 SPINDLES QUANTITY: 1 SUESSEN SPINNING MACHINE MODEL: RC1 1000 YEAR: 1995 624 SPINDLES QUANTITY: 1 SUESSEN SPINNING MACHINE MODEL: FIOMAX B 1000 YEAR: 2000 624 SPINDLES QUANTITY: 1 LINKED TO: SCHLAFHORST WINDING MACHINE MODEL: 238/147 YEAR: 1996 QUANTITY: 3 QUANTITY AVAILABLE: 1 Learn More

TT-5138 RIETER OPEN END LINE 5400 ROTORS, MODEL R60, YEAR 2014 TO 2016 RIETER OPEN END LINE 5400 YEAR 2014 TO 2016 BLOWROOM MACHINES: UNIFLOC A11 HEAVY METAL SEPARATOR A 48 UNICLEAN B122 UNIMIX B76 UNISTORE A79 CONDENSER A21 MAGIC EYE JOSSI VISION SHIELD JOSSI TVS XSPECT WASTE OPENER B25 UNICONTROL Learn More

TT-4298 COMPLETE CARDED COTTON RING SPINNING PLANT, 20,400 SPINDLES, YEAR 1998 TO 2010 Learn More

REFERENCE NUMBER: M-2025 (7702RDCBJM6UF) COMPLETE RING SPINNING PLANT OF 20,448 SPINDLES - YEAR 1995 COMPLETE RING SPINNING PLANT OF 20448 SPINDLES ALL MACHINES ARE OF YEAR 1995 AND ARE IN RUNNING IN EXCELLENT CONDITION BLOW ROOM: COMPLETE TRUTZSCHLER BLOW ROOM LINE CONSISTING OF AXI FLOW CLEANER AFC : 1 BALE OPENER BOA : 1 BLENDOMAT BDT 019 (2300) CLEANOMAT CVT 3 : 1 CONDENSER LVSA : 2 FAN TV 425: 2 MULTI MIXER mm10 : 1 SECUROMAT SC : 1 SEPAROMAT ASTA: 1 CARDING: 11 TRUTZSCHLER CARDING MACHINES MODEL DK 760 DRAWFRAME: 3 CHERRY HARA DRAW FRAME MODEL : D600 4 CHERRY HARA DRAW FRAME MODEL: D 600 USC COMBERS: 2 CHERRY HARA HI LAP MODEL : HL 100 11 CHERRY HARA COMBERS MODEL : VC 300 A ROVING: 6 ZINSER ROVING FRAMES MODEL : 660 NO. OF SPINDLES: 120 RING FRAME: 18 ZINSER RING FRAMES MODEL: 321E FU NO. OF SPINDLES : 1136 RING DIA: 38mm GAUGE : 70 mm DRAFTING SYSTEM: SPRING LOADED SKF 235 SPINDLE WHARVES DIA: 19.5 WITH OHTC : YES WINDING: 9 MURATA 7 V WINDING MACHINE NO. OF SPINDLES: 60, WITH USTER / LOEPFE ELECTRONIC YARN CLEARERS WITH AUTOMATIC FEEDING TWISTING: 24 VOLKMAN TFO MACHINES MODEL : VTS 09 O S NO. OF SPINDLES: 192 POT DIA: 150 GAUGE : 250mm 8 HAMEL ASSEMBLY WINDER QUANTITY AVAILABLE: 1 Learn More