Search results for: 'inst'

J-4684 DIGITAL KNIFE CUTTING MACHINE, WORKING AREA 2500mm x 1600mm, FOR SINGLE PLY FILM CUTTING WORKING AREA: LENGTH 2500 x WIDTH 1600mm MAIN CUTTING CONFIGURATION: 1) AUTO FEEDING TABLE 2) BELT DRIVE SYSTEM 3) 8 INDEPENDENT SUCTION ZONES (UNDERNEATH THE MACHINE TABLE THERE ARE 8 TUBES CONNECTING TO THE VACUUM PUMP. THERE IS ONE SOLENOID VALVE WHICH CONTROLS THE OPENING AND CLOSING) 4) 7.5 KW VACUUM PUMP 5) ONE KNIFE HOLDER 6) OSCILLATING KNIFE QUANTITY: 1 Learn More

TT-1676 SIEMENS SGT-100 TYPHOON GAS TURBINE, YEAR 1994, 4.4 MW AT 11,000 VOLTS, 50 Hz SIEMENS SGT-100 TYPHOON GAS TURBINE YEAR: 1994 MACHINE TYPE: GAS TURBINE PACKAGE BRAND: SIEMENS MODEL: SGT-100 TYPHOON GAS TURBINE 50 Hz CONDITION: GOOD CONDITION (USED) QUANTITY: 1 Learn More

TT-1644 PLASTIC AGGLOMERATOR, WITH CONVEYOR FEED MACHINE TECHNICAL SPECIFICATIONS 1. FEEDING METHOD: BY CONVEYOR BELT 2. BELT WIDTH: 600mm 3. BELT LENGTH: 4500mm 4. MOTOR POWER: 2.2KW 380V 50Hz 3-P (OR 440 VOLTS AVAILABLE) 5. MACHINE TYPE: X800 6. CHAMBER VOLUME: 800LITER 7. CHAMBER MATERIAL: 12mm STAINLESS STEEL 8. CAPACITY: 500KG PER HOUR 9. ROTATING KNIFE: 4 PCS, CAN BE ADJUSTABLE 10. FIXED BLADES: 9 PCS 11. KNIFE LIFE TIME: MORE THAN 1000 TONS AT THE FIRST TIME THEN IT CAN BE RE-SHARPENED TO USE AGAIN. 12. BLADE & KNIFE MATERIAL: 9CRSI 13. ROTARY SPEED: 680 RPM 14. MOTOR POWER: 132KW (OR 440 VOLTS AVAILABLE) 380V-50Hz-3P 15. MOTOR MANUFACTURE: WNF FAMOUS 16. DISCHARGE METHOD: PNEUMATIC 17. ELECTRIC CONTROL CASE: SOLID METAL SHEET. 18. CONTACTORS AND SWITCHES: SIEMENS Learn More

TT-1617 SPLIT HEAD PATTERN SEWING MACHINE SPECIFICATIONS SPLIT HEAD PATTERN SEWING MACHINE SPECIFICATIONS THE MAX. SEWING SPEED: 2000SPM HOOK: STANDARD HOOK THE MAX. FOOT LIFT: 115mm THE MAX.STITCH LENGTH: 12.70mm THE INSIDE WORKING LENGTH: 300mm NEEDLE: DPX17, #18 QUANTITY: 1 Learn More

TT-1599 DORNIER HTV8J RAPIER LOOMS, WORKING WIDTH 1800mm, YEAR 1996 TO 1997, JACQUARD ADDITIONAL INFORMATION: STATUS: DISMANTLED AND STORED IN WAREHOUSE CONDITION: COMPLETE AND IN GOOD WORKING CONDITION DELIVERY: IMMEDIATELY TRANSPORT: 1 X 40FT CONTAINER, 1 X 20FT CONTAINER (ESTIMATED) QUANTITY: 4 Learn More

TT-1596 NORDMECCANICA SUPER SIMPLEX SOLVENTLESS LAMINATOR, WIDTH 1400mm, YEAR 1995 NORDMECCANICA SUPER SIMPLEX SOLVENTLESS LAMINATOR BRAND: NORDMECCANICA MODEL: SUPER SIMPLEX YEAR: 1995 AVAILABLE: NOW QUANTITY: 1 Learn More

TT-1336 MENEGATTO COVERING MACHINES FOR DOUBLE COVERING OF BARE RUBBER OR SPANDEX, YEAR 2003 TO 2006 ITEM 001 MODEL: 1500/2003-NG, YEAR 2003 QUANTITY: 3 SETS ITEM 002 MODEL: 1500/2003-NG, YEAR 2006 QUANTITY: 2 SETS COVERING MACHINES FOR DOUBLE COVERING OF BARE RUBBER OR SPANDEX. ITEM 003 MODEL: HPV, YEAR 2003 BOBBIN WINDER PREPARED FOR SPOOLS 5 ½ X 92 HOLE 30mm -36 SPINDLES WARRANTY: EXCLUDED INSTALLATION: EXCLUDED Learn More

TT-1529 MULLER MBJ3, YEAR 1997, JACQUARD MACHINE IN PRODUCTION IN THIS MOMENT QUANTITY: 2 Learn More

YY-2212 PERFORATING LINE, USEFUL WORKING WIDTH 1800mm GENERAL TECHNICAL FEATURES: USEFUL WORKING WIDTH: 1800mm; MAXIMUM DIAMETER OF THE ROLL TO BE UNWOUND: mm. 1550 (FOAM) / 1550 (FABRIC); MAXIMUM ROLL WEIGHT: 200KG; ADJUSTABLE MECHANICAL SPEED: 400 STROKES PER MINUTE; APPROXIMATE PRODUCTION SPEED (DEPENDING ON THE TYPE OF MATERIAL AND DRILLING): M/MIN 3/6; POWER DISCHARGED ON CM: TON 120000; THREE-PHASE PRIMARY VOLTAGE + EARTH: V/Hz 380/400+E/50 Hz; INSTALLED POWER OF THE MOTORS: 26KW; AC MOTORS, ELECTRIC DRIVES, ELECTRIC CABLES AND WIRING, ARE ACCORDING TO CEI STANDARDS; EPOXY PAINTING; THE MACHINES ARE AUTOMATICALLY SYNCHRONIZED BY MEANS OF ELECTRONIC DRIVES "INVERTER" A.C. MOTORS, PNEUMATIC DANCER ROLLERS (COMPENSATORS) AND LOAD CELLS. QUANTITY: 1 Learn More

TT-1511 TILLOO LANDING CRAFT WORK BOAT, 135’ X 30’ X 6’6”, YEAR 1975 OVERVIEW YEAR 1959 REBUILT IN 1975 135’ X 30’ X 6’6” GROSS TONNAGE: 216 ADDITIONAL - 10 TON CRANE HEIGHT (FROM MAIN DECK): 4700mm (15.4 FEET) FIXED BOOM LENGTH: 9000mm (29.5 FEET) MAXIMUM CAPACITY ACCORDING TO MANUFACTURER PLATE: 12.27 T. (27,000 POUNDS) QUANTITY: 1 Learn More