Search results for: 'Auto+8'

REFERENCE NUMBER: M-3504 (880EASDHH7) K WORSTED SPINNING PLANT - 1 x COGNETEX GILL MODEL SCE.11.VA, BOBBINS/CANS FEEDING, ELECTRONIC AUTOLEVELLER, DELIVERY 1 SLIVER IN 1 CAN DIA. 700 x 1000 mm. - 1 X COGNETEX MODEL SC.400 PREPARATION LINE, YEAR 1993, COMPOSED BY: - 1ST GILL MODEL SCE.11.VA, CANS FEEDING, ELECTRONIC AUTOLEVELLER, DELIVERY 1 SLIVER IN 1 CAN DIA. 1000 x 1200 mm. - 2ND GILL MODEL SC.22.V, CANS FEEDING, DELIVERY 2 SLIVERS IN 1 CAN DIA. 1000 x 1200 mm. - 3RD GILL MODEL SC.24.V, CANS FEEDING, DELIVERY 4 SLIVERS IN 2 CANS DIA. 1000 x 1200 mm - 1 x SANT'ANDREA VERTICAL FINISHER MODEL RF2B, YEAR 1993, 24 HEADS, TUBES OF 300 mm. - 1 x COGNETEX FRAMES MODEL FTC8L, YEAR 1992, 736 SPINDLES, RING DIA. 55 mm., PK.1601, INVERTER, MANUAL DOFFING, MAGITEX BLOWER - 2 x COGNETEX FRAMES MODEL FTC8L, YEAR 1992, 736 SPINDLES EACH, RING DIA. 55 mm., PK.1601, INVERTER, AUTODOFFING, MAGITEX BLOWER - 3 x ZINSER FRAMES MODEL 319SL, YEAR 1/1983 + 1/1986 + 1/1988, 812 SPINDLES EACH, RING DIA. 54 mm., PK.1601, INVERTER, AUTODOFFING, MAGITESX BLOWER sold - 2 x ZINSER FRAMES MODEL 319SL, YEAR 1/1983 + 1/1986, 736 SPINDLES EACH, RING DIA. 54 mm., PK.1601, AUTODOFFING, MAGITEX BLOWER sold - 1 x ZINSER FRAME MODEL 421E, YEAR 1992, 736 SPINDLES, RING DIA. 54 mm., PK.1601, AUTODOFFING, MAGITEX BLOWER - 2 x SAVIO WINDERS MODEL ESPERO.E, YEAR 1996, 36 HEADS EACH, AUTOLOADING, AUTODOFFING, NO WAXERS, MESDAN SPLICERS, LOEPFE MODEL TK.740 CLEARERS, DELIVERY 6”, MAGITEX BLOWER - 3 x SAVIO WINDERS MODEL ESPERO.E, YEAR 1999, 48 HEADS EACH, AUTOLOADING, AUTODOFFING, NO WAXERS,MESDAN SPLICERS, LOEPFE MODEL TK.840 CLEARERS, DELIVERY 6”, MAGITEX BLOWER - 1 x RITE DOUBLING MACHINE MODEL ARD/L, YEAR 2000, 40 POSITIONS, SINGLE SIDE, AUTODOFFING, COUPLING TILL TO 6 ENDS, EXTERNAL CREEL, ELECTRONIC STOP MOTION, DELIVERY 8”, ELECTROJET BLOWER - 3 x VOLKMAN SAURER 2X1 TWISTERS MODEL VTS.07, YEAR 2000, 144 POSITIONS EACH, INVERTER, VULCOJET PNEUMATIC THREADING, FEEDING 8”, DELIVERY 6”, CONICITY 4°20’, ELECTROJET BLOWER. - 4 x VOLKMANN 2X1 TWISTERS MODEL VTS.07, YEAR 1/1987 + 1/1988 + 2/1992, 144 POSITIONS EACH, VULCOJET PNEUMATIC THREADING, FEEDING 2X6”, DELIVERY 6”, CONICITY 4°20’, ELECTROJET BLOWER. - 1 x VOLKMANN 2X1 TWISTER MODEL VTS.07, YEAR 1992, 160 POSITIONS, VULCOJET PNEUMATIC THREADING, FEEDING 2X6”, DELIVERY 6”, CONICITY 4°20’, ELECTROJET BLOWER. - 1 x VOLKMANN 2X1 TWISTER MODEL VTS.07, YEAR 1993, 168 POSITIONS, VULCOJET PNEUMATIC THREADING, FEEDING 2X6”, DELIVERY 6”, CONICITY 4°20’, ELECTROJET BLOWER. - 1 x MOTOCONO HIGH BULKING MACHINES MODEL HBI, YEAR 2000, 32 HEADS, FEEDING 6”, BULKING BY INDIVIDUAL END, ELECTROJET BLOWER, LINKED WITH MOTOCONO WINDER MODEL LDA, YEAR 2000 - 1 x MOTOCONO HIGH BULKING MACHINES MODEL HBI, YEAR 2000, 32 HEADS, FEEDING 6”, BULKING BY INDIVIDUAL END, ELECTROJET BLOWER, LINKED WITH MOTOCONO WINDER MODEL L/CF, YEAR 2004 - 1 x MOTOCONO HIGH BULKING MACHINES MODEL HBI, YEAR 2004, 32 HEADS, FEEDING 6”, BULKING BY INDIVIDUAL END, ELECTROJET BLOWER, LINKED WITH MOTOCONO WINDER MODEL LDA, YEAR 2003 - 2 x ATLAS COPCO AIR COMPRESSOR MODEL GA.37, YEAR 1/1996 + 1/2001, 7,5 HP (FOR WORKING WITH WINDERS) ALL THE PLANT IS RUNNING 380V – 50 HZ, TRIPHASE ALL ACCESSORIES AS TUBES, CANS, CONES ARE INCLUDED QUANTITY AVAILABLE: 1 Learn More

J-3638 POCKET SPRING ROLL PACKING MACHINE CAPACITY: 14 ROLLS PER HOUR MAXIMUM ROLL DIAMETER: 800mm AUTOMATIC FEEDING SYSTEM CENTERING UNIT ON AUTOMATIC FEEDING SYSTEM COUNTER FOR NUMBER OF PRODUCTS TO BE WRAPPED QUANTITY: 1 Learn More

YY-3034 FULLY AUTOMATIC VERTICAL MATTRESS HANDLE ATTACHING MACHINE INCLUDING THE LABEL ATTACHMENT AND END SEWING TOGETHER, SEWING WIDTH 120 TO 450mm TECHNICAL PARAMETERS: SEWING WIDTH: 120 TO 450mm (4.7 INCHES TO 17.7 INCHES) SEWING THICKNESS: ≤25mm (ONE INCH) PRODUCTION CAPACITY: 4~6M/MIN (7 TO 8 YARDS PER MINUTE) TOTAL POWER: 8KW POWER SUPPLY: 220V QUANTITY: 1 Learn More

REFERENCE NUMBER: L-2590 
POLYETHYLENE FOAM SHEET PRODUCTION LINE
MODEL 120-EPE 1100 TO 2000mm THICKNESS 8mm

Learn More

C-4357 FULL-AUTO SINGLE AND DOUBLE SHEETS WET TISSUE MACHINE WITH AUTO ELIMINATION FUNCTION Y-200, WIDTH 900mm

Y-200 FULL-AUTO SINGLE AND DOUBLE SHEETS WET TISSUE MACHINE WITH AUTO
ELIMINATION FUNCTION
MAIN TECHNICAL PARAMETER (SUITABLE FOR 1 OR 2 PIECE /BAG)
PRODUCTION FLOW: UNROLLING — FOLDING — WETTING — CUTTING — STACKING — PACKING — DELIVERING
(1) MAIN TECHNICAL PARAMETER:
POWER SUPPLY: 380V 50HZ
POWER: 6KW
SUITABLE RAW MATERIAL: AIR LAID PAPER, SPUNLACE/HOT-ROLLING NONWOVEN FABRIC
SIZE OF RAW MATERIAL: (150 TO 250) × 1000 (mm, W*DIA)
WEIGHT OF RAW MATERIAL: 40 TO 80G/㎡
WET TISSUE UNFOLDED SIZE: (140 TO 280) × (150 TO 250) (mm, L×W)
WET TISSUE FOLDED SIZE: (70 TO 140) × (45 TO 85) (mm, L×W)
PACKING FILM: OPP/PE, PET/PE
PRODUCTION SPEED: 150 TO 240 PCS/MIN
NET WEIGHT: 1850 KG
SIZE OF MACHINE: 7200*900*1650 (mm, L×W ×H)

QUANTITY: 1

Learn More

YY-3532 FOAM AIR PERMEABILITY TESTER, 2 OPTIONS 2 OPTIONS FOR FOAM AIR PERMEABILITY TESTER THIS INSTRUMENT IS COMPLETELY BASED ON THE NATIONAL STANDARD TEST REQUIREMENTS, RESEARCH AND DEVELOPMENT OF CUSTOM DEVELOPMENT, A COMPLETE REPLACEMENT FOR THE STANDARD RECOMMENDED RXQ-1 TYPE OF FOAM AIR PERMEABILITY TESTER, THE INSTRUMENT HAS A HIGH DEGREE OF INTEGRATION, THE USE OF THE LATEST MEASUREMENT AND CONTROL TECHNOLOGY, TO ACHIEVE THE AUTOMATION OF THE TEST PROCESS, INTELLIGENT, AND IMPROVE THE TESTING ACCURACY. THROUGH THE 7-INCH TOUCH SCREEN, THE ENTIRE TESTING PROCESS OF ONE-KEY OPERATION, SIMPLE OPERATION, INTELLIGENT AND CONVENIENT, IS A MAJOR RESEARCH INSTITUTIONS, SCIENTIFIC RESEARCH INSTITUTES, QUALITY INSPECTION UNITS FOR THE DETERMINATION OF SPONGE AIR PERMEABILITY OF THE NECESSARY INSTRUMENTS. QUANTITY: 1 Learn More

TT-4959 RIETER COTTON RING SPINNING PLANT WITH 26112 SPINDLES, YEAR 2010 TO 2016 RIETER COTTON RING SPINNING PLANT 26112 SPINDLES PRODUCTION YEAR: 2016 BRAND: RIETER STATE: USED QUANTITY: 1 Learn More

REFERENCE NUMBER: A-2511 SUGAR AND ALCOHOL PLANT CANE UNLOAD SECTOR THE CANE UNLOADING SECTOR IS EQUIPPED WITH THE EQUIPMENT LISTED BELOW IN THE CONDITION TO CARRY OUT A GRINDING OF 8400 TCD WHICH CORRESPONDS TO A HARVEST OF 1800000 TONNES OF CANE / YEAR • 01 HILO UNLOADER OF STORAGE • 01 HILO UNLOADER OF MILLING • 01 FEEDER SUGARCANE TABLE WITH INCLINATION OF 25 INCHES • 01 FEEDER SUGARCANE TABLE WITH INCLINATION OF 45 INCHES • 02 CRANES WITH CAPACITY OF 20 TONNES • 01 TRANSPORTER TYPE CUSCH - CUSH OF 40 INCHES • 02 MOTOR PUMP WITH CAPACITY OF 1000 M³/H TO 50 MCW FOR CANE WASHING • 01 CONTAMINATED FLUID TREATMENT SYSTEM • 01 METAL STRUCTURE BUILDING MEASURING 20000 X 100000 mm CANE PREPARATION SECTOR THE SUGARCANE PREPARATION SECTOR IS EQUIPPED WITH THE FOLLOWING AUTOMATED EQUIPMENT WITH THE CONTROL BY THE SUPERVISORY INSTALLED IN THE CONTROL ROOM AS SHOWN BELOW TO PERFORM A CRUSHING OF 7200 TCD WHICH CORRESPONDS TO A CROP OF 1600000 TONS OF SUGARCANE / YEAR • 01 METALLIC CONVEYOR OF 60 INCHES • 01 LEVELING OF CANE OF 60 INCHES • 01 CANE KNIVES SET TYPE COP-8 OF 60 INCHES • 01 CAN SHREDDER SET TYPE COP-5 OF 60 INCHES • 01 FEEDER ROLL 60 IINCHES • 01 RUBBER TRANSPORTER FOR CANE SHREDDED OF 60 INCHES • 01 TGM TURBINE FOR KNIVES SET • 01 TGM TURBINE FOR SHREDDER SET • 01 HIGH AND LOWER SPEED REDUCER OF KNIVES SET • 01 HIGH AND LOWER SPEED REDUCER OF SHREDDER SET • 01 REDUCER FOR METALLIC CONVEYOR • 01 REDUCER FOR FEEDER ROLL • 01 REDUCER OF SHREDDED CANE TRANSPORTER TYPE BELT MILLING CANE SECTOR THE CANE MILLING SECTOR OF THE PLANT IS EQUIPPED WITH THE FOLLOWING AUTOMATED EQUIPMENT WITH THE CONTROL BY THE SUPERVISORY INSTALLED IN THE CONTROL ROOM TO CARRY OUT A GRINDING OF 7200 TCD CORRESPONDING TO A 222 - DAY HARVEST TO GRIND 1600000 TONS. CANE / YEAR • 04 MILLS OF 32 X 60 INCHES • 03 INTERMIDIATE TRANSPORTER OF 60 INCHES • 01 ROTARY SIEVE FOR MILLING 300 TCD • 01 TGM TURBINE OF DRIVING THE 1º / 2º MILLS • 01 TGM TURBINE OF DRIVING OF 3º / 4º MILLS • 01 REDUCER OF HIGH AND LOW SPEED OF DRIVING THE 1º / 2º MILLS • 01 REDUCER OF HIGH AND LOW SPEED OF DRIVING THE 3º / 4º MILLS • 03 REDUCER INTERMEDIATE TRANSPORTER OF 60 INCHES • 02 PUMPS OF 1ST JUICE • 02 PUMPS OF JUICE IMBIBITION OF 3RD FOR 2ND MILL • 02 PUMPS OF JUICE IMBIBITION OF 4TH FOR 3RD MILLS • 02 PUMPS OF MIXED JUICE OF MILL FOR JUICE TREATMENT STEAM GENERATION SECTOR THE STEAM GENERATION SECTOR OF THE PLANT IS PREPARED TODAY TO PERFORM A 7200 TCD GRINDING CORRESPONDING TO A 220 - DAY HARVEST TO GRIND 1600000 TON. CANE / YEAR WITH THE FOLLOWING AUTOMATED EQUIPMENT WITH CONTROL BY THE SUPERVISORY INSTALLED IN THE CONTROL ROOM AS SHOWN BELOW • 01 BOILER N ° 01, MODEL: TS-3-150 MODIFIED FOR CBS-120-21 KG / CM² TODAY GENERATES AN AVERAGE OF 11000 KG / HR OF STEAM AT A PRESSURE OF 21 KG / CM² • 01 BOILER N ° 02, MODEL: TS-3-150-21 KG / CM² TODAY GENERATES AN AVERAGE OF 55000 KG / HR OF STEAM AT A PRESSURE OF 21 KG / CM² • 01 DEAERATOR WITH A CAPACITY OF 70 M³ • 01 78 INCHES BAGASSE METALLIC TRANSPORTER OF 32000 mm LENGTH • 01 48 INCHES BAGASSE TRANSPORTER FROM MILL TO BOILER • 01 48 INCHES BAGASSE RETURN TRANSPORTER FOR BOILER • 01 REDUCER OF BAGASSE TRANSPORTER FROM MILL TOBOILER • 01 REDUCER OF BAGASSE RETURN TRANSPORTER TOBOILER • 02 MOTO - PUMPS OF WATER FEEDING OF DEAERATOR • 02 MOTO - PUMPS OF WATER TREATMENT OF BOILER • 01 MOTO - PUMP WITH CAPACITY OF 300 M³/H TO 350 MCW FOR WATER FEEDING OF BOILER • 01 TURBO-PUMP WITH CAPACITY OF 300 M³/H TO 350 MCW FOR WATER FEEDING OF BOILER • 02 MOTO-PUMPS WITH CAPACITY OF 220 M³/H TO 50 MCW FOR WET SCRUBBER OF BOILER NO. 2 • 03 MOTO - PUMPS OF 40 M³/H TO 300 MCW • 01 METALLIC RESERVOIR WITH 200 M³ OF CONDENSED WATER CAPACITY POWER GENERATION SECTOR THE POWER GENERATION SECTOR IS EQUIPPED WITH THE FOLLOWING MODERN AND AUTOMATED EQUIPMENT LISTED BELOW TO MEET A GRINDING OF 8400 TCD • 01 THREE - PHASE GENERATOR OF 6250 KVA – 13800 VOLTS – 60Hz • 01 TGM STEAM TURBINE MODEL TM - 5000 • 01 REDUCER RENK - ZANINI WITH CAPACITY OF 5000 KW • SEVERAL ELECTRICALS PANELS OF THE GENERATOR • 01 TURBO GENERATOR HOUSE BUILDING • 02 WATER COOLING TOWERS FOR THE TURBO-GENERATOR • 02 MOTO - PUMPS OF 100 M³/H TO 30 MCW SUGAR FACTORY THE SUGAR FACTORY WAS SET UP BETWEEN 2007 / 2008 AND COMPLETELY AUTOMATED WITH THE CONTROL BY THE SUPERVISORY INSTALLED IN THE CONTROL ROOM, PRODUCING AN AVERAGE OF 500000 KG OF VHP SUGAR PER DAY, A VALUE CORRESPONDING TO A MILLING OF 5000 TCD. THE TRANSPORT OF THIS SUGAR MANUFACTURED AT THE DECASA PLANT IS BEING TRANSPORTED BY MEANS OF A BUCKET VEHICLE WITH A DESTINATION INFORMED BY THE CUSTOMER. FOR THIS PLANT TO PRODUCE CRYSTAL SUGAR IC - 150, WE WILL NEED TO ACQUIRE AND ASSEMBLE THE FOLLOWING EQUIPMENT • SULFITATION EQUIPAMENT • BAGGING EQUIPMENT OF 50 KG BAGS • BUILD OR RENT AN INFLATABLE WAREHOUSE TO STORE SUGAR WITH THE INSTALLATION OF THIS EQUIPMENT, THE SUGAR FACTORY IS PREPARED TO RECEIVE A MILLING OF 5000 TCD CORRESPONDING TO A DAILY PRODUCTION OF 500000 KG OF CRYSTAL SUGAR IC - 150 PER DAY ALCOHOL DISTILLERY THE DISTILLERY WAS INSTALLED IN 1982 WITH A CAPACITY OF 300000 LITERS OF HYDRATED ALCOHOL PER DAY. WHEN THE FORMER OWNER'S UNIT WAS SOLD TO THE OLIVAL TENÓRIO GROUP IN 2003, THE NEW ENTREPRENEUR INVESTED IN THE MANUFACTURE OF ALCOHOL IN 2006 BY INSTALLING ANOTHER COLUMN OF DISTILLATION WITH A CAPACITY OF 300,000 LITERS AND AUTOMATED 100% INCREASING ITS PRODUCTION CAPACITY TO 600,000 LITERS OF HYDRATED ALCOHOL PER DAY • 02 TYPE “A” DISTILLATION COLUMNS WITH CAPACITY TO PRODUCE 300 M³ OF ALCOHOL / DAY • 02 TYPE “B” RECTIFICATION COLUMNS WITH CAPACITY FOR PRODUCTION OF 300 M³ OF ALCOHOL / DAY • 01 TYPE “A” DISTILLATION COLUMN WITH CAPACITY FOR PRODUCTION OF 300 M³ OF ALCOHOL / DAY • 01 TYPE “B” RECTIFICATION COLUMN WITH CAPACITY FOR PRODUCTION OF 300 M³ OF ALCOHOL / DAY • 09 TUBULAR HEAT EXCHANGERS TYPE “K” • 02 TUBULAR HEAT EXCHANGERS TYPE “J” • 02 TUBULAR HEAT EXCHANGERS TYPE “E” • 02 TUBULAR HEAT EXCHANGERS TYPE “E1” • 02 TUBULAR HEAT EXCHANGERS TYPE “E2” • 02 TUBULAR HEAT EXCHANGERS TYPE “R” • 02 TUBULAR HEAT EXCHANGERS TYPE “R1” • 11 NEW FERMENTATION VATS WITH A CAPACITY OF 300 M³ • 03 PLATE HEAT EXCHANGERS FOR THE WORT • 05 PLATE TYPE HEAT EXCHANGERS FOR VATS • 01 VAT FOR WINE • 01 CO₂ RECOVERY COLUMN • 02 PUMPS WITH A CAPACITY OF 600 M³ / H - 50 MCA FOR THE COOLING SYSTEM OF THE PLATE HEAT EXCHANGERS • 01 PUMP WITH A CAPACITY OF 800 M³ / H FOR THE COOLING SYSTEM OF THE PLATE HEAT EXCHANGERS • 02 CENTRÍFUGES HAD - 90 • 04 CENTRÍFUGES HAD - 60 WITH THE INSTALLATION OF THIS EQUIPMENT, THE ALCOHOL DISTILLERY IS PREPARED TO PRODUCE 600000 LITERS OF ALCOHOL PER DAY, RECEIVING A MILLING OF 6500 TCD CORRESPONDING TO 2500000 TONS OF CANE / YEAR Learn More

REFERENCE NUMBER: M-7873

CHOCOLATE CEREAL AND GRANOLA BAR AUTOMATIC LINE

 

AUTOMATIC LINE

FOR CHOCOLATE CEREAL AND GRANOLA BARS

AUTOMATIC COMBINATION BETWEEN THE FREEZING, FORMING, AND PRESSING ROLLERS, AND THE SLITTING TECHNOLOGY.

THIS PRODUCING LINE IS A MULTI-FUNCTION LINE WHICH CONSISTS OF KITCHEN EQUIPMENTS, FORMING AND SHEETING SYSTEM, NUTS SPRINKLING SYSTEM, FORMING AND PRESSING ROLLER, REFRIGERATION SYSTEM, COOLING TUNNEL, CANDY BAR SLITTING, CUTTING AND CONVEYING SYSTEM, AND CHOCOLATE ENROBING MACHINE, ETC.

 

THIS LINE TAKES THE PLACE OF THE TRADITIONAL, MANUAL WORKSHOP PRODUCTION WITH FULL AUTOMATIC MACHINERY PRODUCTION. THIS LINE WILL BE IDEAL FOR THE CANDY BAR LEISURE FOOD INDUSTRY, WITH MODERN AND LARGE QUANTITY PRODUCTION.

Learn More

REFERENCE NUMBER: C-4010

NEEDLE PUNCHING PRODUCTION LINE, WORKING WIDTH 3000mm TO 6000mm, YEAR 2005

 

DETAILS:

 

OFFER 001

NEEDLE PUNCHING PRODUCTION LINE

YEAR: 2005

WORKING WIDTH: 6000mm

WEIGHT: 120 TO 800 G/M²

MATERIAL: PP, PES

CAPACITY: 600 KG/H

WITH FOLLOWING FIBERS:

6.7 DTEX

FIBER LENGTH: 60 TO 90mm

WORKING HOURS: CA. 41000 H

 

CONSISTS OF:

OFFER 002

BALE OPENER

MAKE: FALUBAZ

FEEDING TABLE: 1000mm WIDTH

2000mm LENGTH

WITH ELECTRONICALLY WEIGH BOXES

COLLECTING CONVEYOR

AND MIXING UNIT

QUANTITY: 4

 

OFFER 003

CHAMBER FIBER MIXING UNIT

QUANTITY: 6

 

OFFER 004

FINE OPENER

WITH METAL DETECTOR

QUANTITY: 1

 

OFFER 005

DUST COLLECTION UNIT

QUANTITY: 2

 

OFFER 006

FOR VOLUMETRIC HOPPER FEEDER

MAKE: FOR

TYPE: HF

QUANTITY: 1

 

OFFER 007

FOR CARDING MACHINE

MAKE: FOR

TYPE: WM 2+2

WORKING WIDTH: 3000mm

BREAST: 3X WORKERS / STRIPPERS

TAMBOUR: 4X WORKERS / STRIPPERS

DOUBLE DOOFER

CONDENSING SYSTEM

QUANTITY: 1

 

OFFER 008

AUTOMATEX CROSSLAPPER

MAKE: AUTOMATEX

TYPE: FA 5000/TC

WITH PROFILING

QUANTITY: 1

 

OFFER 009

ASSELIN WEB DRAFTER

MAKE: ASSELIN

TYPE: ETO-15

ROLLERS: 15

QUANTITY: 1

 

OFFER 010

AUTOMATEX PRE – NEEDLE LOOM

MAKE: AUTOMATEX

TYPE: PR160/T

NEEDING: DOUBLE BOARD DOWN

NEEDLES: 2X 8000 N/M

STROKE: 55mm

INCLUSIVE CBF FEEDING SYSTEM

QUANTITY: 1

 

OFFER 011

AUTOMATEX NEEDLE LOOM

MAKE: AUTOMATEX

TYPE: AG160/TB

NEEDING: 4 BOARD QUATTRO PUNCH

NEEDLES: 4X 8000 N/M

STROKE: 65mm

QUANTITY: 1

 

OFFER 012

BELMATEX ACCUMULATOR

MAKE: BELMATEX

QUANTITY: 1

 

OFFER 013

BELMATEX END OF LINE

MAKE: BELMATEX

SLITTER

WINDER

QUANTITY: 1

 

QUANTITY: 1 LINE

Learn More