Search results for: 'drawing-'

YY-3559 13 MW SIEMENS SGT-400 NATURAL GAS TURBINE GENSET 22 PICES 2022 NEW – UNUSED DETAILS: 1. MANUFACTURER SIEMENS 2. MODEL SGT-400 3. YEAR 2022 4. CONDITION NEW 5. CATEGORY NATURAL GAS TURBINES 6. SUBCATEGORIES 10 - 99 MW 7. WATTAGE 13 MW 8. HOURS ZERO 9. FREQUENCY 50 Hz 10. FUEL TYPE NATURAL GAS 11. VOLTAGE 230 V 12. SIZE (L X W X H) 14.0 X 3.1 X 4.3 M 13. WEIGHT APPROX. 84 TON Learn More

YY-3558 13 MW SIEMENS SGT-400 NATURAL GAS TURBINE GENSET 12 PICES 2022 NEW UNUSED DETAILS: 1. MANUFACTURER SIEMENS 2. MODEL SGT-400 3. YEAR 2022 4. CONDITION NEW 5. CATEGORY NATURAL GAS TURBINES 6. SUBCATEGORIES 10 - 99 MW 7. WATTAGE 13 MW 8. HOURS ZERO 9. FREQUENCY 50 Hz 10. FUEL TYPE NATURAL GAS 11. VOLTAGE 230 V 12. SIZE (L X W X H) 14.0 X 3.1 X 4.3 M 13. WEIGHT APPROX. 84 TON Learn More

TT-6011 TRUTZSCHLER/ELECTROJET/TOYODA/MURATA/SIEGER/USTER/MAG COMPLETE SPINNING MILL, 31,000 SPINDLES, YEAR 2018 TRUTZSCHLER/ELECTROJET/TOYODA/MURATA/SIEGER/USTER/MAG COMPLETE SPINNING MILL 31,000 SPINDLES YEAR 2018 VERY NEW MACHINES Learn More

TT-2857 TRUTZSCHLER - TOYODA - MURATA RING SPINNING PLANT WITH 12096 SPINDLES, YEAR 2007 TO 2010 BLOW ROOM ITEM 001 TRUTZSCHLER MANUAL BALE OPENER BOU QUANTITY: 1 ITEM 002 TRUTZSCHLER MULTIMIXER MXI-6 QUANTITY: 1 ITEM 003 TRUTZSCHLER TO-TI OPENER ATTACHED WITH MIXER MXI-6 YEAR 2007 QUANTITY: 1 CARDING ITEM 004 TRUTZSCHLER TC03 CARDING QUANTITY: 6 DRAWFRAME ITEM 005 TRUTZSCHLER TD03 BREAKER DRAWING WITHOUT AUTOLEVELLER QUANTITY: 3 ITEM 006 TRUTZSCHLER TD03 FINISHER DRAWING WITH AUTOLEVELLER QUANTITY: 3 SIMPLEX ITEM 007 TOYODA FL100 SIMPLEX, YEAR 2007 QUANTITY: 3 RINGFRAME ITEM 008 TOYODA RX 240 G RINGFRAME WITH AUTODOFFER QUANTITY: 12 AUTOWINDER ITEM 009 MURATA 21C AUTOWINDER QUANTITY: 5 Learn More

TT-2274 FIBRE EXTRUSION TECHNOLOGIES LIMITED FET-100 SERIES PILOT MELT SPINNING SYSTEM, YEAR 2020 FIBRE EXTRUSION TECHNOLOGIES LIMITED FET-100 SERIES PILOT MELT SPINNING SYSTEM FOR CONTINUOUS FILAMENT YARN APPLICATIONS (MULTIFILAMENT) YEAR 2020 AVAILABLE FOR IMMEDIATE SALE QUANTITY: 1 Learn More

T-9989 TRUTZCHLER - TOYOTA - MURATA COMPLETE 37000 SPINDLE RING SPINNING PLANT, YEAR 2018 WITH THE TOP OF THE LINE UP TRUTZSCHLER BACK PROCESS, TOYOTA RING FRAME AND MURATEC QPRO LINK CORNER Learn More

YY-1966 MELTBLOWN LINE, PRODUCTION SPEED MAXIMUM 100 METERS PER MINUTE 1750mm final trim width (68 inches) DETAILS: CONTAINERS TO SHIP APPROXIMATELY: 15 CONTAINERS 40” OT (THERE MAY BE NEEDED SOME HC OR OUT OF GAUGE CONTAINERS) IT HAS COOLING CALENDER IT HAS WINDER WITH SLITTERS IT PRODUCES 1 TO 5 MICRON (EVEN UNDER 1 MICRON) RANGE OF GSM: IT PRODUCES 15 TO 300 GSM STATUS: ASSEMBLED, IT CAN RUN PRODUCTION YEAR: THE LINE HAS BEEN PRODUCED IN SEPTEMBER 2020 AND IT HAS BEEN IN PRODUCTION ONLY FOR ONE YEAR. QUANTITY: 1 Learn More

REFERENCE NUMBER: R-8152
FLORIGO AC300 POTATO CRISP LINE YEAR 1994
FLORIGO POTATO CRISP LINE, MANUFACTURED BY FLORIGO
FLORIGO MODEL AC300, YEAR 1994
QUANTITY: 1

Learn More

REFERENCE NUMBER: M-7480
BLOWING-CARDING LINE
MAKE: RIETER
ALL MACHINES YEAR 2002/2003
QUANTITY: 1 LINE

Learn More

REFERENCE NUMBER: J-1123 (1212KJNMXX11) NONWOVEN LINE EXIT WIDTH 2500mm MIXING/BLEND UNIT CONSIDER 1 3- COMPONENTS MIXING UNIT 1500 KG/H WITH FEET TABLE 1 MIXING CHAMBER/ MIXMASTER FÖRDERVENTLATOREN 1 CARDING WILLOW WORKING WIDTH 1700 MM CHUTE FEEDER VIBRITING UNIT BELT WEIGHTER 1 PCS. DOUBLE DOFFER CARD FOR TYP DF 680 WORKING WIDTH 2500 MM 6 ROLLER DRAWING-IN VOLANT EXIST (BUT NOT IN US, BECAUSE NOT FOR MAN-MADE FIBERS) RIM VENTILATION UPPER DOFFER WITH RANDOM DOWN DOFFER WITH TAKE-OFF ROLL ALL ELECTRIC DRIVES ARE FULL SYNCHRONIZES WITH THE MAIN DRIVERS OF THE NEEDLE PUNCH UNIT 1 PCS. TECHNOPLANTS CROSS-LAPPER TYP 2555. OC INPUT: 2`500 MM OUTPUT: 5700 MM SPEED: 80 M/MIN PROFILING UNIT 1 PCS. TECHNOPLANTS PRE-NEEDLEPUNCHE UNIT TYP PRN.50.DU.55 F WORKING WIDTH 5500 MM WITH FINGER- DRAWING-IN SYSTEM, TYP FG.5500 (CBF) 5000 NEEDLE/ METER UP 5000 NEEDLE / METER DOWN TOTAL 10'000 NEEDLE/ METER UP AND DOWN MAXI. STORKE FREQUENZ: 1200 U/MIN. STORKE HIGHT: 70 MM ENTRY SPEED. 1,2 UP TO 12 M/MIN. 1 PCS. FINISHING-NEEDLEPUNCH DILO OUG II 55 WORKING WIDTH: 5500 MM NEEDLE UP AND DOWN: 8000 + 8000 PRO LFM. TOTAL 16'000 NEEDLE 4 BOARDS MAXI STORKE FREQENZE.: 1200 U/MIN STORKE HIGHT: 60 MM ENTRY SPEED : 1,2 UP TO 12 M/MIN 1 PCS SPACER 1 PCS. LONGITUDINAL- UND CROSS CUTTING, MOD. LTC. CC-RB STAINLESS STEEL , DIAMETER 300 MM, UP TO 6 –KNIVES 1 PCS. WINDING, MODELL WM.55.M INCLUDING WEIGHING MACHINE QUANTITY AVAILABLE: 1 Learn More