Search results for: 'electron d 0'

REFERENCE NUMBER: A-1188 (1212GHBXX11) A RIFA DOUBLER WINDER RF231B AND TWO FOR ONE TWISTERS RIFA 321A, YEAR 2004 (1) RIFA DOUBLER WINDER YEAR: 2004 TYPE: RF231B (6) RIFA TWO FOR ONE TWISTERS YEAR: 2004 TYPE: RIFA 321A QUANTITY AVAILABLE: 7 Learn More

YEAR 1999 TYPE: SE10 VERSION: ACO-288 192 ROTORS Learn More

REFERENCE NUMBER: A-1140 (1212GHBXX11) A SULZER 213 ES 105 E10 TW YEAR 1977 TYPE TW11 – WIDTH 5400mm – COLORS 1 FOR POLYPROPYLENE WIDTH: 5400mm COLORS: 1 COMES WITH: -6 LEVERS -6 CAM -6 HEALD FRAMES / TYPE COARSE -HEALDS 331 J -1 ELECTRONIC WEFT STOP MOTION LOPFE, PROJECTILE D1 -WARP STOP MOTION, 3 ELECTRO RAILS -DROP WIRES 2500 E01 165x11x0.5 -1 WARP REGULATOR, MECHANICAL 03:39 -1 CLOTH REGULATOR -1 WARP BEAM, DISC ø 940mm, TUBE ø 260mm -1 BATCHROLER -1 FEEDER ROJ PP ONE LOOM HAS CENTER TUCKING UNIT QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: A-1139 (1212GHBXX11) A SULZER 213 ES 110 E10 D1 YEAR 1982 TYPE PU – WIDTH 5400mm – COLORS 1 FOR POLYPROPYLENE WIDTH: 5400mm COLORS: 1 COMES WITH: -6 LEVERS -6 CAM -6 HEALD FRAMES / TYPE COARSE -HEALDS 331 J -1 ELECTRONIC WEFT STOP MOTION LOPFE, PROJECTILE D1 -WARP STOP MOTION, 3 ELECTRO RAILS -DROP WIRES 2500 E01 165x11x0.5 -1 WARP REGULATOR, MECHANICAL 03:39 -1 CLOTH REGULATOR -1 WARP BEAM, DISC ø 940mm, TUBE ø 260mm -1 BATCHROLER -1 FEEDER ROJ PP ONE LOOM HAS CENTER TUCKING UNIT QUANTITY AVAILABLE: 4 Learn More

REFERENCE NUMBER: M-5057 (1212WBJLXX11) L DORNIER HTVS8/S YEAR 1995 WIDTH 2200mm DORNIER HTVS8/S YEAR 1995 MNB 2200mm DIALOG PANEL 1 CONTROL BOX EQUIPPED WITH STAUBLI DOBBY 2660 WITH 20 SHAFTS INSTALLED 4 COLORS ECS ELECTRONIC TAKE-UP AND WARP LET-OFF LOOM READY FOR WORK WITH 1000mm WARP BEAMS EACH LOOM EQUIPPED WITH: 8 HEALD FRAMES WITH 4,000 HEALDS AND DROPPERS 1.5 WARP BEAM AND 1.5 CLOTH ROLLER 4 FEEDERS WITH CREEL QUANTITY AVAILABLE: 4 Learn More

REFERENCE NUMBER: M-4863 (1111HCMTXX10) L THIES TRD-III JET DYEING MACHINE YEAR 2013 THIES TRD III JET DYEING MACHINE BOUGHT NEW IN APRIL 2013 USED APPROXIMATELY 15 TIMES 2 TUBES, BUT YOU CAN CLOSE ONE TUBE AND RUN ONE TUBE IF SMALLER BATCH IS NEEDED 150 KGS PER PORT , TOTAL FOR THE MACHINE 300 TO 330 KGS ONE STOCK TANK TWO SIDE TANKS ORGATEX SOFTWARE, YOU CAN PROGRAM THE MACHINE FROM YOUR COMPUTER AND NETWORK THE MACHINE TO THIS COMPUTER AND TRANSFER FILES FROM THE COMPUTER TO THE MACHINE AND VICE VERSA QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: M-4963 (121275TYL11RX) L SIMA HRT-6 RING TWISTER YEAR 2001 – 48 SPINDLES SIMA RING TWISTER MODEL HRT-6 48 SPINDLES YEAR 2001 SUITABLE FOR THE PRODUCTION OF MULTI-THREADED TWISTED YARNS FROM 1,000 TO 12,000 DENIER, IN SYNTHETIC AND NATURAL FIBERS FEEDING WITH SPOOLS OR BOBBINS AND TAKE-UP ON FLANGED BOBBINS USED FOR POLYPROPYLENE QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: M-5002 (1212AJSWHH11) L SULZER L-5100 LOOMS FOR WEAVING ACETATE YEAR 1990 (9) X SULZER L 5100 S190 N2 SNTE YEAR 1990, WITH STAUBLI ELECTRONIC DOBBY, TYPE 2560 14 LEVERS INSTALLED, 2 COLORS, 10 HEALD FRAMES 1 WARP BEAM Ø 800mm, 2 WEFT FEEDERS, 1 BIG ROLL BATCHER (10) X SULZER L 5100 S190 N1-1 ENTE YEAR 1990, WITH CAM BOX, 8 LEVERS INSTALLED 2 COLORS, 8 HEALD FRAMES 1 WARP BEAM Ø 800mm, 2 WEFT FEEDERS, 1 BIG ROLL BATCHER (8) X SULZER L 5100 S190 N1-1 IKTE YEAR 1990, WITH CRANK MOTION 6 LEVERS INSTALLED, 2 COLORS, 4 HEALD FRAMES 1 WARP BEAM Ø 800mm, 2 WEFT FEEDERS, 1 BIG ROLL BATCHER LOOMS ARE COMPLETE AND IN VERY MINT CONDITION INSPECTION ANY TIME AVAILABLE NOW QUANTITY AVAILABLE: 27 Learn More

REFERENCE NUMBER: M-3683 (8803KEGS7RC) K TERRY VAMATEX MODEL SP1151 ES YEAR 1998 WIDTH 2600mm -JACQUARD BONAS CSJ TERRY VAMATEX MODEL SP1151 ES 2600mm YEAR 1998 EQUIPPED WITH: 8 COLORS ELECTRONIC JACQUARD BONAS CSJ, CONTROLLER 250, WITH CAPACITY 2688 HOOKS, 2500 INSTALLED 4 WEFT FEEDERS ROY 1.5 UPPER BEAM, 1.5 DOWN BEAM 1.5 CLOTH ROLLER 4.500 DROPPERS WITH HARNESS INCLUDE QUANTITY AVAILABLE: 4 Learn More

REFERENCE NUMBER: M-4566 (1111225RSJ10U) L THERMOPLASTIC HOTMELT COATING LINE MP ENGINEERING TYPE HM59-SD3 YEAR 2005 WIDTH 102” (2590mm) YEAR: 2005 TYPE: HM59-SD3 MATR: 404/04 ROLL FACE: 2600mm (102”) WORKING WIDTH: 2400mm (95”) VOLTAGE: 480/3/60 CONTROL VOLTAGE: 110/60 CONSISTING OF: CAROUSEL 3 POSITION LET-OFF, ENTRY ON ACCUMULATOR WITH HOT-WIRE SEAMING DEVICE, 8000 VOLT STATIC ELIMINATOR, PNEUMATICALLY OPERATED FABRIC HOLDING DEVICE FOR TENSION CONTROL, ACCUMULATOR WITH 8-ROLLS UP AND 9-ROLLS DOWN APPROX.. 80-YARD CAPACITY, COMPENSATING ARM ON EXIT SIDE. ROLLS ARE 4” DIA. X 102” FACE ALUMINUM, CONTROL PANEL MOUNTED ONTO FRAMEWORK, FULLY ENCLOSED CAGE. SECOND ACCUMULATOR WITH ROLL CRADLE FOR SECOND SUBSTRATE LET-OFF, ACCUMULATOR WITH 9-ROLLS UP AND 10 ROLLS DOWN, APPROX.. 54 YARD CAPACITY, ROLLS ARE 4’ DIA. X 102” FACE ALUMINUM, INCLUDES 8000 VOLT STATIC ELIMINATOR AND PNEUMATIC FABRIC HOLDING FOR TENSION, PENDULUM TYPE GUIDING DEVICE ON EXIT SIDE, CONTROL PANEL MOUNTED ONTO FRAMEWORK, FULLY ENCLOSED CAGE. OVERHEAD GANTRY WITH ACCESS STAIRS ON RIGHT SIDE OF FIRST ACCUMULATOR, EXTENDS OVER THE EXTRUDER WITH JIB MOUNTED FOR EASE IN REMOVING DIE FROM MACHINE, GUIDING/CENTERING DEVICE MOUNTED ONTO GANTRY FEEDING COATING HEAD. MP ENGINEERING EXTRUDER/APPLICATOR TYPE HM59-SD3, MATR. NO. 402/04, WITH 102” DIE, 98” RUBBER-BELT WITH PNEUMATIC CYLINDERS FOR BELT TENSION AND GUIDING, HEATED CYLINDER BACKING TO DIE, OPERATOR PLATFORM, CONTROLS MOUTNED IN DOOR AND OPERATOR TOUCH SCREEN PANEL. (NOTE: THESE ARE PRESENTLY MOUNTED ON PRODUCTION LINE AND WILL BE REMOVED AND PLACED BACK INTO/ONTO APPLICATOR. 480/3/60 COATEM SISTEMI C.R.L. IMBALLAGIO & HOT MELT EXTRUDER, S/N 50701, TYPE/MODEL CE-200, WITH DIGITAL MICROPROCESSOR AND INVERTER FOR SPEED VARIATION, DESIGNED TO WORK MAINLY WITH POLYESTER, POLYAMIDE AND POLYURETHANE BUT CAN ALSO EXTRUDE ABS, POLYTHENE, POLYPROPYLENE AND ADHESIVES LIKE EVA ADHESIVES. 480/3/60 CONAIR DRYER CD-300, PL-D-196-1, MODEL D03H4101310, S/N 9D0597, 480/3/60, AND HOPPER. THIRD ACCUMULATOR FOR BONDED PRODUCT WITH 6-ROLLS UP AND 7-ROLLS DOWN, APPROX…60-YARD CAPACITY, ROLLS ARE 6” DIA. X 102” FACE ALUMINUM, WITH DRAW-ROLL TENSION DEVICE MOUNTED ONTO EXIT, OVERHEAD CARRIER ROLLS AND FRAMEWORK DELIVERY TO ELECTRIC A-FRAME WINDER WITH 102” FACE LAY-ON ROLL, AND SEMI-AUTOMATIC BATCHER FOR INDIVIDUAL ROLLS, 2-ROLL SURFACE WINDING 102” FACE WIDTH, OVERHEAD CORE FEED, FABRIC CENTERING DEVICE, ELECTRIC SCISSOR CUT-OFF, KICK-OUT TO 2-ROLL BED, OPERATOR PLATFORM AND OPERATOR CONTROLS. ALL MACHINES PRODUCED BY MP CONFORMS TO EEC DIRECTORY 89/392 CEE (CE MARK) TECHNICAL FEATURES OF THE LINE, ACCORDING TO DWG 100-904/1C ROLLERS WIDTH 2600mm WORKING WIDTH 2400mm MAXIMUM DIAMTER OF THE ROLLS OF PU FOAM 1500mm MAXIMUM DIAMETER OF THE UNWOUND ROLLS OF FABRIC 600 ° 1500 MAXIMUM DIAMETER OF THE REWOUND ROLLS 500 ° 1500 (IN CASE YOU ARE REWINDING ROLLS OF FABRIC LAMINATED TO PU FOAM, THE MAXIMUM DIAMETER IS 1750mm) ADJUSTABLE MECHANIC SPEED: 5 TO 50 M/MIN MAIN POWER SUPPLY + NEUTRAL + EARTH 480+N+E/60 V/HZ VOLTAGE ON CONTROL PANELS 110/60 V/HZ INSTALLED POWER FOR MOTORS 22KW INSTALLED POWER FOR IR HEATER 14,25KW INSTALLED POWER TO HEAT THE SLOT-DIE 32KW INSTALLED POWER FOR THE THERMAL OIL HEATING UNIT FOR THE CALENDERING ROLLERS 32,2KW INSTALLED POWER FOR THE CHILLER 12,9KW A.C. MOTORS, DRIVER, ELECTRIC CABLES ARE ACCORDING TO CEI NORMS BACKGEAR ROLLERS, WITH PAINTED SURFACE OR ALUMINUM MADE WITH DIAMETER 100/120/150mm COMPRESSED AIR CONSUMPTION, AT 6 BAR 1500LT/H COOLING WATER CONSUMPTION (WATER MUST HAVE A TEMPERATURE NOT HIGHER THAN 10°C) 5500LT/H ADJUSTABLE TENSION ON THE REWOUND MATERIALS 5 A 35 KG. PAINTING GREEN RAL 6027 E BLUE MARINE RAL 5021 A.C. MOTORS CONTROL THE SPEED OF THE MACHINES, AND ARE AUTOMATICALLY SYNCHRONISED THROUGH ELECTRONIC DRIVES (INVERTER) AND PNEUMATIC DANCER UNITS (COMPENSTAORS) ESTRUDER: CAPACITY UP TO 200 KG/H (DEPENDING ON THE VISCOSITY OF THE ADHESIVE TO BE EXTRUDED) POWER OF THE MOTOR AND RESISTANCES: 90KW MAXIMUM MELTING TEMPERATURE: 220°C MATERIALS TO BE PROCESSED NONWOVENS 30:150 GR/M2 SYNTHETIC AND NATURAL FABRICS (EXCLUDING STRETCHY FABRICS) WITH WEIGHT 100:600 GR/M2 SCRIMS FOR BACKING FABRIC WITH WEIGHT 70:120 G/M2 MAXIMUM THICKNESS OF PU FOAM 15mm MINIMUM THICKNESS OF PU FOAM 2mm DENSITY OF PU FOAM 22/40 KG/M3 THERMOPLASTIC ADHESIVE TO BE COATED THERMOPLASTIC HOTMELTS (COPOLYAMMIDE, COPOLYESTER, EVA AND POLYURETHANE THERMOPLASTIC HOTMELT GRANULES) DATA REFERRING TO PRODUCTION THE PRODUCTION SPEED CAN CHANGE, DEPENDING ON THE KIND OF HOTMELTS, ON THEIR MELTING TEMPERATURE, ON THEIR VISCOSITY, AND ON THE GRAMS PER SQUARED METER TO BE COATED QUANTITY AVAILABLE: 1 Learn More