Search results for: 'Control+pan'

(1 SET) BENNINGER SIZING MACHINES (SLASHERS), YEAR 2000 HEADWAY 2800mm WIDE DELIVERY ROLLER 2 SIZE BOXES WITH DRY CANS 16 BEAM CREEL MOISTURE MONITORS & TEMPERATURE MONITORS WITH DRIVES & CONTROL PANELS WITH 1 SIZE COOKING KETTLE (2 SETS) BENNINGER DIRECT WARPER, YEAR 1990 MODEL: ZCR-1400 CONE POSITION: 432 ENDS CONE DIAMETER: 30CM SPEED 800 TO 1,000 METERS PER MINUTE BEAM SIZE: 28 INCH, 30 INCH, 1 METER EACH MACHINE WITH 20 PIECES WARP BEAMS DELIVERY: AROUND 15 DAYS UPON RECEIPT OF DOWNPAYMENT PAYMENT TERMS: 30% DOWNPAYMENT ON ORDER, 70% BY T/T 2 DAYS BEFORE LOADING QUANTITY AVAILABLE: 3 Learn More

REFERENCE NUMBER: M-4191 (1010PLOKXX9) K FEMCO SKYVER MODEL FEMCO A-14 ( 1 ) FEMCO SKYVER MODEL: FEMCO A-14 MFG BY: FERRY INDUSTRIES, INC ROLLER WIDTH 68 INCHES DIAMETER OF ROLLER 3.5 INCHES DIMENSION OF TABLE: WIDTH: 68" INCHES LENGTH: 125" INCHES INCLUDING CONTROL PANEL COMPLETE AND IN RUNNING CONDITION , STILL INSTALLED ON THE PLANT FLOOR QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: M-1795 (77057BHB6R) SANTEX SANTASHRINK YEAR 1997 WIDTH 1800mm SANTEX SANTASHRINK YEAR 1997 WIDTH 1800mm CONSISTING OF: ENTRY UNIT DRY CHAMBERS VIBRATION AND DAMPER UNIT EXIT UNIT ALL MOTORS ELECTRIC PANELS EXHAUSTER MOISTURE MEASURE UNIT ENERGY SAFE UNIT CONTROL COMMANDER SANTAMATIC 2000 QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: K-8462 SANTEX SANTASHRINK 180 YEAR 1997 WIDTH 1800mm SIEVE DRUM DRYER WORKING WIDTH: 1800mM YEAR: 1997 THE DRYING LINE IS CONSISTING OF: -INFEED -DRYING CHAMBERS -VIBRATION AND STEAMING UNIT -EXIT -DRIVE SYSTEM -EXHAUST AIR SYSTEM -MEASURING UNIT TO MEASURE MOISTURE -CONTRO PANEL THE MACHINE IS PREVIOUSLY USED FOR DRYING POLYAMID TUBULAR MATERIAL WITH CONTROL UNIT SANTAMATIC 2000 3x400V+N+E 230V 50HZ CONNECTED LOAD 64 KW QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: A-1115 BRAZZOLI H.T. DYEING MACHINES TERRY TOWEL YEAR 2002 Brazzoli H.T. Dyeing machines, for terry towel fabrics. Type Saturno Luft HTF. Year 2002 Capacity 400kg each machine, these machines can also be operated coupled to dye one lot of 800kg. Supplied with main motor and pump, automatic valves for steam and water functions. Add tank + dosing pump. Electrical panel with Microprocessor controls. QUANTITY AVAILABLE: 2 Learn More

REFERENCE NUMBER: M-4177 (1010PAIMXX9) L DORNIER HTV 4/SD WEAVING LOOMS YEAR 1990 WIDTH 2800mm DORNIER WEAVING LOOMS TYPE HTV 4/SD YEAR 1990 WIDTH 2800mm STAUBLI DOBBY TYPE 2237 RS 20 SHAFTS 4 COLORS – 4 ECS AT 1 CONTROL PANEL WITH ELECTRONIC LET-OFF AND MECHANICAL TAKE-UP PREPARED FOR CLOTH ROLLER QUANTITY AVAILABLE: 5 Learn More

JAMES HUNTER MACHINE CO Learn More

(1) EMCO QUILTER 2 BARS WIDTH: 88” INCHES BOBBIN # 10 WITH 7 CIRCULAR BLADES IN THE BACK FOR BORDER CUTTING COMPUTER DRIVEN CLOTH TRAY CAT WALK OVERHEAD THREAD RACK PLATE INFORMATION (FOR THE QUILTER) MODEL: 88•1•3•4 PLATE INFORMATION (FOR THE CONTROL PANEL) MODEL: 88•1•3•4 THE COMPUTER INCLUDES 2 DRIVES DRIVES INFORMATION FOR COMPUTER A B AMP. MODEL: MPA-25 MPA-10 SERIAL NUMBERS: 36418 36324 D/C: 130120 130104 PHASE: SINGLE/3 SINGLE INPUT VOLTAGE: 80-260VAC 80-260VAC INPUT FREQUENCY: 45-65Hz 45-65Hz INPUT CURRENT: 30/18A 12A OUTPUT CURRENT: 25/50A 10/20A PWM FREQUENCY: 15KHZ 18KHZ TERMINAL TORQUE: 7 INCHES 7 INCHES AMP. TEMP RANGE: 0-45C° 0-45C° Learn More

TORRES MODEL MICROPUNT-153 SUEDING/EMERIZING MACHINE YEAR 2000 WIDTH 2000mm COMPLETE WITH DUST SUCTION FILTERS IT IS THE ONLY MACHINE ON THE MARKET WHICH CAN REALLY SUEDE BOTH HEAVY COTTON TWILL AND A LIGHT AND ELASTIC KNITTED FABRIC SUCH AS LYCRA. AS THE FABRIC CONTENT IS WITHIN THE WORKING AREA (ONLY 65 CM.), THE TENSION OF THE SAME CAN BE CONTROLLED PERFECTLY, AND THIS IS A MUST, IF YOU WANT TO OBTAIN A UNIFORM FINISH. EXTREMELY HIGH ABRASIVE/FABRIC EXCHANGE DUE TO THE FACT THAT ITS SUEDING ROLLERS ARE MANUFACTURED WITH HIGHLY ACCURATE CALIBRATED STEEL TUBE, DYNAMICALLY BALANCED AND TURN AROUND BEARINGS AT EXTREMELY HIGH SPEED (18 M/S). INNER COOLING OF THE SUEDING ROLLERS BY FORCED AIR FLOW. FABRIC SPEED BY MEANS OF ASYNCHRONOUS MOTORS DRIVEN BY A VECTORIAL INVERTER. FABRIC TENSIONING BY MEANS OF A PNEUMATIC SYSTEM OF OUR OWN DESIGN. CONTACT ARC VARIABLE BY MEANS OF A MOTORIZED SYSTEM. POSSIBILITY OF USING A CONVENTIONAL AND/OR A DIAMOND (LONG LIFE) ABRASIVE. AUTOMATIC SEAM PASSAGE. STATIC ELIMINATOR. FABRIC CLEANING BY MEANS OF A BEATING/BRUSHING PROCESS WITH A SUCTION NOZZLE. DUST SUCTION AND COLLECTION SYSTEM. ALL THE WORKING PARAMETERS ARE SHOWN ON THE PANEL AND THEY MAY BE REPRODUCED FAITHFULLY Learn More

YEAR: 1997 TERRY AIR JET WEAVING LOOMS DORNIER LTNF-6J WITH JACQUARD WIDTH 2600mm 6 COLORS 6 WEFT FEEDERS ELECTRONIC TAKE-UP AND LET OFF PREDISPOSED FOR CLOTH ROLL 4 BEAMS PER LOOM 2 LOOMS FROM 1997 WITH PANEL CONTROL 1 AND JACQUARD CX960 (YEAR 1997) CONTROLER JC4 FORMAT 3072 HOOKS Learn More