Search results for: 'Model''

TT-1802 ROLL PRINTER TO PRINT ANY TEXTILE IN 1 SECOND ITEM 001 MODEL: MK4 ITEM 002 MODEL: MK3 ITEM 003 MODEL: MK2 ITEM 004 MODEL: MK1 YOU CAN PRINT ONTO ANY TEXTILE PRODUCT IN 1 SECOND LOGOS UP TO 4 COLORS AT ONCE (EVEN NON WOVEN OR SUBLIMATED). HIGH QUALITY LOGOS CERTIFIED BY OEKO TEX STANDARD 100 WITH THE MOST COMPETITIVE PRICES IN THE MARKET. 1 SINGLE PERSON CAN PRINT 500 PIECES PER HOUR == BOOST YOUR PRODUCTION MADE IN BARCELONA Learn More

J-4354 MATSUSHITA TECMIC POCKET COIL PLANT WITH 2 COILERS FEEDING 1 ASSEMBLER, YEAR 2011- CAPACITY 5000 TO 6000 COILS PER HOUR TOTAL (EACH COILER MAKES 3000 COILS PER HOUR) MAKE: MATSUSHITA TECMIC YEAR: 2011 2 COILERS FEEDING 1 ASSEMBLER AS FOLLOWS: VOLTAGE: 480 VOLTS, 3-PHASE CURRENTLY CONNECTED TO A 600 VOLT SUPPLY WITH A TRANSFORMER DOWNSTEPPING TO 480 VOLTS, 3-PHASE, TO RUN ENTIRE SETUP. TOTAL REQUIRED FLOORSPACE: 53 FEET x 23 FEET FOR TWO COILERS, TURNTABLE, POCKET COIL MACHINES AND ASSEMBLER (15,900mm x 6900mm) CURRENTLY RUNNING UNTIL AUGUST 31ST. STATUS: CURRENTLY RUNNING QUANTITY: 2 COILERS FEEDING 1 ASSEMBLER Learn More

THE AUTOMATED FILTER TESTER MODEL 9981 CONTINUES TO BE THE BEST SOLUTION FOR TESTING PARTICULATE RESPIRATOR FILTERS, DISPOSABLE FILTERING FACE PIECES, AND A WIDE ASSORTMENT OF FILTER MEDIA. OUR FILTER TESTERS HAVE BEEN USED IN QUALITY CONTROL AND MANUFACTURING BY LEADING FILTER AND FILTER MEDIA MANUFACTURERS AND REFERENCE TEST INSTITUTES AROUND THE WORLD FOR MORE THAN 20 YEARS DUE TO THEIR PROVEN DURABILITY AND RELIABILITY, WHICH IS VALUED IN DEMANDING MANUFACTURING ENVIRONMENTS AND QA/QC LABORATORIES.

THIS MODEL OFFERS HIGHER SENSITIVITY AND RESOLUTION THAN PREVIOUS MODELS - UP TO 99.9999 PERCENT EFFICIENCY HAS BEEN PRODUCED WITH EMERY OIL AT CONCENTRATIONS OF 200 MG/M³. THE NEW SERVICEABLE PHOTOMETERS ARE LOWERING THE COST OF OWNERSHIP AND ENABLE PROACTIVE SCHEDULING OF MAINTENANCE FOR MINIMAL IMPACT TO PRODUCTION SCHEDULES.

THE MODEL 9981 FEATURES A HIGH DEGREE OF AUTOMATION AND SELF-DIAGNOSTICS THAT GREATLY SIMPLIFIES OPERATION, INCREASES THROUGHPUT, AND IMPROVES OVERALL MEASUREMENT PERFORMANCE. WHEN LOOKING FOR A STAND-ALONE TESTER TO DETERMINE PENETRATION OR FILTER EFFICIENCY AND PRESSURE DROP OF YOUR MEDIA, FILTER CARTRIDGES, FILTERS, AND RESPIRATORY MASKS THE MODEL 9981 IS UP TO THE CHALLENGE.

THE BUILT-IN CAPABILITY TO TEST WITH SALT AND OIL MEANS THAT JUST ONE UNIT IS NEEDED TO TEST YOUR PRODUCT TO:
• US 42 CFR 84, GB2626, JMOL
• ISO 16900-3, EN 143
• ISO 23328-1 (AND MORE)
APPLICATIONS
• USA COMMERCIAL RESPIRATOR REGULATION 42 CFR PART 84
• CHINESE RESPIRATOR STANDARD GB2626
• JAPANESE RESPIRATOR STANDARD JMOL
• EUROPEAN EN 143, ISO 16900-3 AND RELATED RESPIRATOR STANDARDS
• ISO 23328-1 (TESTING FILTERS FOR ANAESTHETIC USE)
• FILTER MEDIA TESTING
• CONSULT OUR REPRESENTATIVE FOR MORE DETAILS
INCLUDED ITEMS
• REFERENCE MEDIA SHEETS
• FLAT-MEDIA AND GRAVIMETRIC FILTER HOLDER
• REFERENCE PRESSURE DROP PLATE
• OIL AND SALT AEROSOL GENERATORS
• SELECTED SPARE PARTS
• CONTACT US FOR CUSTOM FILTER HOLDERS

EMAIL US FOR PRICE & PICTURES
INCLUDE OUR REFERENCE NUMBER

Learn More

LIST NUMBER: L-2987
SIZING MACHINES FOR SALE

REFERENCE NUMBER: P-6749
ROTAL
SIZING MACHINE
YEAR: 1990
QUANTITY: 1

REFERENCE NUMBER: P-7175
BENNINGER ZELL
SIZING
YEAR: 1994
HEAD STOCK WORKING WIDTH: 2800mm
QUANTITY: 1

REFERENCE NUMBER: P-5168
SUCKER
MODEL: MOENUS Z 14
SIZZING MACHINE
WIDTH: 3400mm

BENNINGER
TYPE: BEN DIRECT
WARPER
QUANTITY: 1

REFERENCE NUMBER: P-5818
SUCKER MULLER
SIZING 2 SIZING BOX WIH BENNINGER DIRECT WARPER
YEAR: 1989
WIDTH: 130 INCHES
QUANTITY: 1

REFERENCE NUMBER: P-5586
BENNINGER-ZELL
WARP SIZING LINE
YEAR: 1994
WORKING WIDTH: 3400mm
QUANTITY: 1

REFERENCE NUMBER: C-1229
SUCKER MULLER SIZING MACHINE
MODEL ZG6
YEAR 1984
WORK WIDTH 3000mm
SCHLAFHORST DIRECT WARPING MACHINE MODEL MZD
YEAR 1984
WORK WIDTH 1600mm
QUANTITY: 1

REFERENCE NUMBER: R-1913
SUCKER SIZING
WORKING WIDTH: 3300mm
QUANTITY: 1

REFERENCE NUMBER: R-3193
BENNINGER SIZING MACHINE
TYPE: BEN-SIZE TEC A13
YEAR: 1994
HEADSTOCK WIDTH: 3400mm
QUANTITY: 1

REFERENCE NUMBER: P-3562
WEST POINT
MODEL: 861
SLASHER
YEAR: 1993
HEADWAY WIDTH: 126 INCHES
QUANTITY: 1

Learn More

REFERENCE NUMBER: L-4870

BEMATIC LINE, WIDTH 2500mm (96”), YEAR 2002 – PAD LINE

 

2 X BEMATIC OPENERS, MODEL BHL2100, YEAR 2002

2 X BEMATIC BLOWERS, MODEL BHL2500, YEAR 2002

1 X BEMATIC FORMER, MODEL BHL2500, YEAR 2002

1 X BOMBI OVEN, DOUBLE BELT, 46 FEET LONG, WITH 3 WEISHUPT BURNERS

WEISHUPT GAS BURNER: MODEL WG30N/1-A

1 X COOLING SECTION

2 X COOLING ROLLERS

1 X FR SPRAYER

RAMCON-FIBERLOCK SLITTER/GUILLOTINE

1 X PAD ROLLER

 

QUANTITY: 1

Learn More

REFERENCE NUMBER: C-4085

GREENVILLE CONTINUOS INDIGO & SULPHUR AND MERCERIZING DYEING LINE, YEAR RECONDITIONED 2004

 

GREENVILLE CONTINUOS INDIGO & SULPHUR AND MERCERIZING DYEING LINE

IN 20 ROPES

YEAR RECONDITIONED: 2004

AND THEN IT STOPPED ON 2009

STILL ON MILL FLOOR

 

A-BALL WARPING MACHINES:

OFFER 001

RED-CHATWOOD BALL WARPER

MODEL: WC 480

YEAR: 1991

MAX. DIAMETER: 1200mm

TRAVERSE MAX.1200mm

MAX. WEIGHT: 816 KGS

ELECTRONIC CONTROL

2 ROLLERS WITH SENSOR

FOR AUTOMATIC REGULATION

AND CONSTANT AND PERIPHERIC WINDING SPEED

AND TENSION YARN FROM CREEL

QUANTITY: 1

 

OFFER 002

REED-CHATWOOD V CREEL

MODEL: LVC/A

YEAR: 1991

WITH ELECTRONIC TENSION REGULATION

504 POSITIONS WORKING

504 POSITIONS STORAGE

GAUGE 340mm X 340mm

80-WOOD LOG

QUANTITY: 2

 

OFFER 003

INDIGO & SULPHUR AND MERCERIZING ROPES DYEING LINE:

YEAR: 1972

YEAR RECONDITIONED: 2004

GREENVILLE

ROPES RANGE 20 ROPES

THIS ROPE RANGE HAS THE FLEXIBILITY TO PRODUCE 11 DIFFERENT DYEING PROCESS

QUANTITY: 1

 

COMPLETE OF:

OFFER 004

CREEL FOR 20 BALLS WARP POSITIONS

QUANTITY: 1

 

OFFER 005

ROPES YARN INTRODUCTION

AND DRAGGING CALENDER

QUANTITY: 1

 

OFFER 006

TANK1 - SODAING, IMBIBITION AND PURGING TANK

WITH LIQUID CIRCULATION

AND FILTERING GROUP

WITH SQEEZING PADDER FOR 10000 KGS

IN UPPER POSITION

QUANTITY: 1

 

OFFER 007

STEAMER

WITH VERTICAL PASSAGES OF FABRIC BY 6 UPPER

AND UNDER 5 CYLINDERS

CAP.L.M.40

QUANTITY: 1

 

OFFER 008

TANK2- FIXING, WASHING, INDIGO DYEING TANK

WITH SQEEZING PADDER FOR 10000 KGS FOR EACH TANK

QUANTITY: 1

 

OFFER 009

8 LONGITUDINAL FINNED CYLINDERS FOR OXIDIZATION OF INDIGO-DYED YARNS

FABRIC CAPACITY 28 LINEAR METERS

QUANTITY: 1 SET

 

OFFER 010

TANK3 - NEUTRALIZATION, WASHING AND INDIGO DYEING

WITH SQEEZING PADDER 10000 KGS

IRON AISI 316 FOR EACH TANK

QUANTITY: 1

 

OFFER 011

8 LONGITUDINAL FINNED CYLINDERS FOR OXIDIZATION OF INDIGO-DYED YARNS

FABRIC CAPACITY 28 LINEAR METERS

QUANTITY: 1 SET

 

OFFER 012

TANK4-TANK5

WASHING AND INDIGO DYEING TANK

WITH SQEEZING PADDER 10000 KGS FOR EACH TANK

QUANTITY: 2

 

OFFER 013

8 LONGITUDINAL FINNED CYLINDERS FOR OXIDIZATION OF INDIGO-DYED YARNS

FABRIC CAPACITY 28 LINEAR METERS

QUANTITY: 1 SET

 

OFFER 014

TANK6-TANK7 - WASHING AND INDIGO DYEING

BLACK SULPHUR DYEING

WITH SQEEZING PADDER 10000 KGS

FOR EACH TANK

QUANTITY: 2

 

OFFER 015

8 LONGITUDINAL FINNED CYLINDERS FOR OXIDIZATION OF INDIGO-DYED YARNS

QUANTITY: 1 SET

 

OFFER 016

TANK8 - INDIGO SPECIAL COLORS DYEING

BLACK SULPHUR DYEING TANK

WITH LIQUID CIRCOLATION

AND FILTERING GROUP

WITH SQEEZING PADDER 10000 KGS FOR EACH TANK

QUANTITY: 1

 

OFFER 017

8 LONGITUDINAL FINNED CYLINDERS FOR OXIDIZATION OF INDIGO-DYED YARNS

FABRIC CAPACITY 28 LINEAR METERS

IN UPPER POSITION

QUANTITY: 1 SET

 

OFFER 018

STEAMER

WITH VERTICAL PASSAGES OF FABRIC BY 6 UPPER

AND UNDER 5 CYLINDERS

CAP.L.M.40

QUANTITY: 1

 

OFFER 019

INDIGO CIRCULATION TANK

COMPLETED WITH FILTERS, HEATING COILS AND

AUTOMATIC DOSER FOR HYDROSULPHITE CAPACIOUS FOR 200 LT.S

WITH DOSING PUMP FOR AUTOMATIC SODA DOSING

ELECTRONIC EQUIPMENT FOR CONTROL OF PH

AND REDOX PARAMETERS

QUANTITY: 1

 

OFFER 020

TANK9-TANK10 - INDIGO DYEING

BLACK SULPHUR DYEING

WITH SQEEZING PADDER 10000 KGS

FOR EACH TANK

QUANTITY: 2

 

OFFER 021

8 LONGITUDINAL FINNED CYLINDERS FOR OXIDIZATION OF INDIGO-DYED YARNS

QUANTITY: 1 SET

 

OFFER 022

TANK11-TANK12-TANK13 - HOT WASHING (AND/ OR INDIGO DYEING)

TANK WITH SQEEZING PADDER 10000 KGS

WITH INOX STEEL HOOD AND ASPIRATION FAN

ALL INSIDE AND OUTSIDE TANKS AND CYLINDERS ARE IN INOX IRON

ALL THE TANKS ARE THERMOREGULATED

EACH TANK IS COMANDED BY MOTOR POWER INVERTER

QUANTITY: 3

 

OFFER 023

RAMALLUMIN DRYING CYLINDERS

YEAR: 1972

YEAR RECONDITIONED: 2002

PART OF TEFLONED CYLINDERS

ALL CYLINDERS STEAM HEATING THERMOREGULATED EXIT

20 COILER SYSTEM FOR CANS

DIAMETER: 1200mm X H.800mm

FOR DYEING ROPES

PANEL ELECTRONIC COMPUTERIZED

AND ELECTRIC POWER FOR ALL FUNCTIONS OF THE LINE

ELECTRONIC CONTROL OF THE TENSION OF THE YARN

WITH ELONGATIONS IN %

BETWEEN THE DIFFERENT POINT

MOISTURE CONTROL

QUANTITY: 36

 

OFFER 024

CANS STORAGE

DIAMETER: 1200mm X H.800mm

INCLUDING-CABIES-PIPING

QUANTITY: 60

 

OFFER 025

INOX IRON CONTROL PANEL FOR THE DYEING PROCESS

QUANTITY: 1

 

OFFER 026

INOX IRON CONTROL PANEL FOR THE SPEED REGULATION

QUANTITY: 1

 

OFFER 027

INOX IRON CONTROL PANEL FOR THE COLORS KITCHEN

COLORS AUTOMATIC ELECTRONIC KITCHEN

QUANTITY: 1

 

OFFER 028

COMPOSED WITH:

CAPACIOUS FOR DARK INDIGO SALVAGE FOR 3500 LTS EACH

QUANTITY: 6

 

OFFER 029

CAPACIOUS FOR DARK INDIGO SALVAGE FOR 10000 LTS EACH

ALL THE CAPACIOUSES ARE IN INOX IRON

AND ARE PROVIDED WITH THE ELECTRIC AGITATOR

PART OF THEM ARE THERMOREGULATED

QUANTITY: 6

 

OFFER 030

DIRECT WARPER MACHINES FOR REBEAMING:

REED-CHATWOOD CHAIN BEAMERS DIRECT WARPERS

MODEL: SBB

YEAR: 1991

MAX. SPEED 410 M/MIN

BEAM FLANGE

DIAMETER: 1000mm

BEAM MAX. WEIGHT: 907 KGS

FOR REBEAMING FROM CANS

WITH ROPES DYEING

TO REED-CHATWOOD CHAIN BEAMERS

WITH AUTOMATIC ELECTRONIC PREFEEDER ACCUMULATOR

WITH 2 POSITIVE ROLLERS

FOR ELECTRONIOC CONTROL OF CONSTANT TENSION

AND PERIPHERIC SPEED ROPES

QUANTITY: 1

 

OFFER 031

NUOVA FORMIA CHAIN BEAMERS DIRECT WARPERS

YEAR: 1987

MAX. SPEED: 410 M/MIN

BEAM FLANGE DIAMETER: 1000mm

BEAM MAX. WEIGHT: 907 KGS

FOR REBEAMING FROM CANS

WITH ROPES DYEING

TO NUOVA FORMIA CHAIN BEAMERS

WITH AUTOMATIC ELECTRONIC

PREFEEDER ACCUMULATOR

WITH 2 POSITIVE ROLLERS

FOR ELECTRONIOC

CONTROL OF CONSTANT TENSION

AND PERIPHERIC SPEED ROPES

QUANTITY: 5

 

OFFER 032

WARP BEAMS FLANGE DIAMETER: 1000mm

INSIDE DISTANCE FLANGE TO FLANGE: 1600mm

FOR EXIT CHAIN BEAMERS AND FEEDING CREEL ROTAL

SIZING MACHINE

SPARE PARTS EXISTING IN THE COMPANY

QUANTITY: 100

 

OFFER 033

SIZING MACHINE

ROTAL SIZING MACHINE

YEAR: 1990

QUANTITY: 1

 

COMPOSED WITH:

OFFER 034

FEEDING CREEL FOR 16 POSITIONS FOR BEAMS FLANGE

DIAMETER: 1000mm X INSIDE

DISTANCE FLANGE TO FLANGE 1600mm

QUANTITY: 1

 

OFFER 035

SIZE TANK WITH DOUBLE GROUP OF DOUBLE SQEEZING

3 CYLINDERS EACH SET GROUP

HIGH PRESSURE TYPE

YEAR: 1999

COMPLETE

QUANTITY: 2

 

OFFER 036

DRYER-GROUP MODEL

OF 16 DRYING INOX CYLINDERS

DIAMETER: 800mm

PART OF THEM TEFLONED

WITH SIDE COVERINGS AND ASPIRATOR

QUANTITY: 1

 

OFFER 037

AUTOMATIC BEAMING MACHINE FOR BEAMS

WIDTH: 2600mm

FOR FLANGE DIAMETER: 1200mm

COMPLETED WITH ELECTRONIC CONTROLS, ETC

QUANTITY: 1

 

OFFER 038

SIZING KITCHEN

COMPOSED OF INOX

1 TANK FOR SIZE PREPARATION

CAPACITY: 1000LTS

AND CAPACIOUS FOR COOKING AUTOCLAVE OF 1000 LTS

AND OF 2 STORAGE RESERVE SIZING CAPACIOUS FOR 1500 LTS

COMPLETED WITH ELECTRIC PANEL

WITH THERMOREGULATION, ETC

QUANTITY: 1

 

QUANTITY: 1 LINE

Learn More

REFERENCE NUMBER: M-4094

COGNETEX SC.400 PREPARATION LINE YEAR 1993

 

COGNTEX PREPARATION LINE

MODEL SC.400

YEAR 1993

 

COMPOSED OF:

- 1^ST GILL MODEL SCE.11.VA, CANS FEEDING, ELECTRONIC AUTOLEVELLER,

DELIVERY 1 SLIVER IN 1 CAN, DIAMETER 1000mm X 1200mm

- 2^ND GILL MODEL SC.22.V, CANS FEEDING,

DELIVERY 2 SLIVERS IN 1 CAN, DIAMETER 1000mm X 1200mm

- 3^RD GILL MODEL SC.24.V, CANS FEEDING,

DELIVERY 4 SLIVERS IN 2 CANS, DIAMETER 1000mm X 1200mm

 

RUNNING AT 380V, 50HZ, TRIPHASE

 

QUANTITY: 1

Learn More

INVENTORY NUMBER: E-3485 TRANSFER COILERS FOR SALE: POSITION 003. REMEX/SPUHL TRANSFER COILER/ASSEMBLER (FTA MODEL 120 STYLE) REMEX COILER SPUHL TRANSFER STATION SPUHL ASSEMBLER REMEX COMPUTER 90 COILS PER MINUTE UP TO QUEEN SIZE 15 JAWS ASSEMBLER 312 COIL COUNT 90 COILS PER MINUTE CENTRAL LUBRICATION NEW GENEVA FOR FTA 120 NEW HEAT TRANSFER TREATER FOR FTA 220 NEW KNUCKLERS (QUICK CHANGE) TYPE VL-80 QUANTITY: 1 SET $135,000 POSITION 004. SPUHL TRANSFER COILER/ASSEMBLER (FTA MODEL 120 STYLE) ORIGINALLY WAS FTA 72 (ALL UNITS ARE SPUHL) RUNNING TWIN + FULL NEW GENEVA FOR FTA 120 NO COMPUTER COIL EXIT OF THROUGH DIFFERENT FROM FTA 120 65 COILS / MIN F65 SW HEAD 13 JAWS ASSEMBLER 312 COIL COUNT FOR TWIN (SINGLE) AND FULL (DOUBLE) SIZES NEW HEAT SET UNIT FOR FTA 220 NEW KNUCKLERS (QUICK CHANGE) TYPE VL-80 CENTRAL LUBRICATION QUANTITY: 1 SET $75,000 POSITION 005. SPUHL TRANSFER COILER/ASSEMBLER (ALL UNITS ARE SPUHL) ORIGINALLY MODEL FTA-72-SW BUT CONVERTED TO FTA 120 KNOTTERS ARE NEW WITH NEWEST STYLE KNOTTERS FROM SPUHL CAN CHANGE COIL SIZES ON THE FLY (NOT THE OLD DYES) QUEEEN SIZE 15 JAWS ASSEMBLER SPECIAL QUICK CHANGE FOR 4 DIFFERENT WIDTHS 312 COIL COUNT CENTRAL LUBRICATION NEW HEAT TREATER UNIT FOR FTA 220 NEW KNUCKLERS (QUICK CHANGE) TYPE VL-80 QUANTITY: 1 SET PRICE $75,000 POSITION 006. SPUHL TRANSFER COILER/ASSEMBLER (FTA MODEL 120 STYLE) (ALL UNITS ARE SPUHL) ORIGINALLY FTA-72 HAS GENEVA FOR FTA-120 NEW KNOTTERS FOR TWIN AND FULL SIZES PLC CONTROL 15 YEARS OLD 11 JAWS ASSEMBLER 252 COIL COUNT CENTRAL LUBRICATION NEW HEAT TREATER FOR FTA 220 NEW KNUCKLERS (QUICK CHANGE) TYPE VL-80 QUANTITY: 1 SET PRICE $75,000

Learn More

REFERENCE NUMBER: M-5335 (220DSHLXX1) L DELL’ORCO & VILLANI RAG TEARING LINES + BALE PRESS (2) X DELL’ORCO & VILLANI CUTTERS YEAR 1989 (2) X DELL’ORCO & VILLANI MIXING ROOMS + BIN EMPTIER TYPE FA / 3030 / T. (1) X DELL’ORCO & VILLANI VOLUMATIC FEEDER, MODEL CARICATORE TYPE CS / 1600, YEAR 1999 (1) X DELL’ORCO & VILLANI RAG TEARING MACHINE, 4 CYLINDERS YEAR 1999, WIDTH 1500mm, EACH DRUM MODEL M/1500, TYPE SFILACCIATRICE (1) X DELL’ORCO & VILLANI VOLUMATIC FEEDER, MODEL CARICATORE TYPE CS / 1600, YEAR 1989 (1) X DELL’ORCO & VILLANI RAG TEARING MACHINE, 3 CYLINDERS YEAR 1989, WIDTH 1500mm, EACH DRUM MODEL M/1500, TYPE SFILACCIATRICE (1) X DELL’ORCO & VILLANI BALE PRESS, TYPE RA / 100, WITH 2 CHAMBERS (ROTATIVE SYSTEM) WITH WEIGHING DEVICE (SCALE FOR KG OF EACH BALE) (1) X DELL’ORCO & VILLANI DUST COLLECTING INSTALLATION, WITH BAGS TO COLLECT THE DUST QUANTITY AVAILABLE: 10 Learn More

REFERENCE NUMBER: M-5300 (131342BVGT12UF) L UNDER PAD PRODUCTION LINE UNDER PAD PRODUCTION LINE MODEL: 100CD PRODUCTS TO BE PRODUCED: 3 SIZES OF DISPOSABLE UNDER PAD (SIZE: 600x900mm, 600x600mm, 600x400mm) MECHANICAL DRIVING SYSTEM WITH INVERTER CONTROL PRODUCT STRUCTURE: FLUFF +SAP; TOP TISSUE; BOTTOM TISSUE; TOP SHEET; BACK SHEET QUANTITY AVAILABLE: 1 Learn More