Search results for: 'press operator'

REFERENCE NUMBER: F-1428

FEATHER FILLING MACHINE MODEL SR-2

PRODUCT FEATURES

•             FULLY ENCLOSED DESIGN TO KEEP SURROUNDINGS CLEAN AND TO SAVE MATERIAL

•             AUTOMATIC WEIGHING WITH ACCURATE LOAD CELL TO ENSURE PRODUCTION QUALITY

•             FILLING TIME IS 2 TO 5 SECONDS

•             NICE DESIGN SUITABLE FOR ALL KINDS OF FABRIC

•             CE CERTIFICATE

 

•             ITEM NO.: SR-2

•             DIMENSION: APPROX. 11000 x 2500 x 3000MM

•             VOLTAGE: 200/380415V 50/60HZ 3PHASE

•             POWER: 13KW

•             FILLING RANGE: 2 TO 100 G, DEPENDING ON THE MATERIAL

•             ACCURACY: ±1G

•             AIR PRESSURE: 0.5-0.8MPA

•             THERE ARE 4 WEIGHING SYSTEMS AND ONE WORKING TABLE FOR DOWN FEATHER

•             IT IS MAINLY USED TO MAKE DOWN FEATHER QUILT

•             IT INCLUDES TWO AUTOMATIC FILLING TABLES, THE WORKING TABLE INCLUDES PNEUMATIC CLAMPING DEVICE FOR TWO FILLING PIPES, COMPOUND SHOE CLAMPING DEVICE, RING CLAMPING DEVICE AIR SUCTION, COMPRESSED AIR RING INJECTOR

•             THE FEATHER DOWN FILLING USES VACUUM METHOD STYLE FUNCTION THAT HELPS TO KEEP THE MATERIAL SOFT, ELASTIC AND HAND FEELING AND AVOIDS THE FEATHER BEING DAMAGED DURING THE FILLING PROCEDURE

•             WEIGHING ACCURACY CAN BE CONTROLLED WITHIN 1 GRAM WHICH CAN BE ADJUSTED BY SINGLE SET OR SINGLE PIECE ACCORDING TO DIFFERENT REQUIREMENT OF DIFFERENT PRODUCTS.

THIS HELPS QUALITY CONTROLLING AND AVOIDS MATERIAL WASTE ALSO

 

 

 

•             SIMPLE OPERATION THAT SAVES LABOR COST AND THE WHOLE SET CAN BE HANDLED BY ONE OPERATOR.

•             WORKING SURROUNDINGS ARE KEPT CLEAN BECAUSE ALL FILLING MATERIALS ARE KEPT INSIDE OF THE HOPPER

•             ADVANCED TECHNOLOGY LEVEL; THE WHOLE SET IS CONTROLLED BY PLC SYSTEM WITH AN ENGLISH OPERATION MENU WHEREIN 100 RECIPES CAN BE SET UP, EACH RECIPE CAN BE SET UP WITH ABOUT 80 SETS OF WEIGHT VALUE WHICH IS SUITABLE FOR VERY COMPLICATED PRODUCT DESIGN WITHIN ONE PIECE

•             HIGH WORKING CAPACITY; THE AVERAGE MATERIAL MEASURING TIME IS 4 TO 6 SECONDS. THE FILLING TIME CAN BE ADJUSTED AS DESIRED SO THAT TWO FILLERS CAN BE HANDLED BY ONLY ONE OPERATOR.

•             WITH OUR PROFESSIONAL R&D GROUP WE CAN DESIGN THE INDIVIDUAL FILLINGS ACCORDING TO YOUR REQUIREMENTS

 

EQUIPMENT INCLUDED:

 

•             MATERIAL HOPPER: DIA.1700 x 2500        1PCS

•             WEIGHING SYSTEM: 800 x 1000 x 1200MM           2PCS

•             PLC CONTROL SYSTEM & CONTROL PANEL:           1 SETS

•             MATERIAL CHANGING HOPPER: 1200 x 1200 x 2500MM  1PCS

•             AIR HOPPER: 1200 x 1200 x 2500MM        1PCS

•             MATERIAL FEEDER: 1200 x 1200 x 1200MM            1PCS

•             BLOWER:             4PCS

•             PIPE:      1SET

•             AUTOMATIC WORKING TABLE:  2SETS

•             ENGLISH EDITION ARTICLE AND VIDEO FOR OPERATION DESCRIPTION

Learn More

REFERENCE NUMBER: F-1432

FEATHER FILLING MACHINE MODEL SR-6

PRODUCT FEATURES

•              FULLY ENCLOSED DESIGN TO KEEP SURROUNDINGS CLEAN AND TO SAVE MATERIAL

•              AUTOMATIC WEIGHING WITH ACCURATE LOAD CELL TO ENSURE PRODUCTION QUALITY

•              FILLING TIME IS 2 TO 5 SECONDS

•              NICE DESIGN SUITABLE FOR ALL KINDS OF FABRIC

•              CE CERTIFICATE

 

•              ITEM NO.: SR-6

•              DIMENSION: APPROX. 6400×2500×3000MM

•              VOLTAGE: 200/380415V 50/60HZ 3PHASE

•              POWER: 11KW

•              FILLING RANGE: 2-2000 G, DEPENDING ON THE MATERIAL

•              ACCURACY: ±10G

•              AIR PRESSURE: 0.5-0.8MPA

•              THERE ARE 4 WEIGHING SYSTEMS AND ONE WORKING TABLE FOR THE DOWN FEATHER FILLING LINE

•              IT IS MAINLY USED TO MAKE DOWN FEATHER QUILT

•              IT INCLUDES TWO AUTOMATIC FILLING TABLES, THE WORKING TABLE INCLUDES PNEUMATIC CLAMPING DEVICE FOR TWO FILLING PIPES, COMPOUND SHOE CLAMPING DEVICE, RING CLAMPING DEVICE AIR SUCTION, COMPRESSED AIR RING INJECTOR

•              THE FEATHER DOWN FILLING USES VACUUM METHOD STYLE HELPS KEEP THE ORIGINAL MATERIAL SOFT, ELASTIC AND HAND TACT AND AVOIDS THE FEATHER BEING DAMAGED DURING THE FILLING PROCEDURE

•              THE ACCURACY CAN BE CONTROLLED WITHIN 10 GRAMS (WEIGHING RANGE:2000 GRAMS), WHICH CAN BE ADJUSTED BY SINGLE SET OR SINGLE PIECE ACCORDING TO THE REQUIREMENTS OF DIFFERENT PRODUCTS. IT HELPS QUALITY CONTROLLING AND AVOIDS MATERIAL WASTE

•              SIMPLE OPERATION THAT SAVES LABOR COST; THE WHOLE MACHINE CAN BE HANDLED BY ONLY ONE OPERATOR.

•              KEEPS CLEAN OF THE SURROUNDING ENVIRONMENT BECAUSE ALL THE FILLING MATERIALS ARE KEPT INSIDE OF THE HOPPER

•              THE WHOLE MACHINE IS CONTROLLED BY PLC SYSTEM WITH AN ENGLISH OPERATION MENU WHEREIN 100 RECIPES CAN BE SET UP IN ADVANCE TO THE CONTROL SYSTEM. EACH RECIPE CAN BE SET UP TO ABOUT 80 SETS OF WEIGHT VALUE WHICH IS SUITABLE FOR VERY COMPLICATED PRODUCT DESIGN WITHIN ONE PIECE

•              THE AVERAGE MATERIAL MEASURING TIME IS 4 TO 6 SECONDS. THE FILLING TIME CAN BE ADJUSTED AS DESIRED SO THAT TWO FILLERS CAN BE HANDLED BY ONE OPERATOR.

•              OUR PROFESSIONAL R&D GROUP CAN DESIGN THE INDIVIDUAL FILLINGS ACCORDING TO YOUR REQUIREMENTS

 

EQUIPMENT INCLUDED:

•              FEEDING SYSTEM: 2400 x 1500 x 3300MM          1PCS

•              WEIGHING SYSTEM: 800 x 1000 x 1200MM         2PCS

•              PLC CONTROL SYSTEM & CONTROL PANEL:           1 SETS

•              BLOWER:                                                                             4PCS

•              PIPE:                                                                                      1SET

•              AUTOMATIC WORKING TABLE:                                   2SETS

•              ENGLISH EDITION ARTICLE AND VIDEO FOR OPERATION DESCRIPTION

 

Learn More

REFERENCE NUMBER: M-3416 (880ARUGHH7) L BALL FIBER PRODUCTION LINES QUANTITY AVAILABLE: 2 Learn More

REFERENCE NUMBER: M-1483 (66032FTG5UF) FIBER FEEDER SYSTEM SUITABLE RAW MATERIALS: CONJUGATE HOLLOW SILICONIZED POLYESTER FIBER≤100mm; HOLLOW SILICONIZED POLYESTER FIBER≤100mm; MICROFIBER 0.7D-3D, LENGTH 32mm-64mm; FIRE PROOF FIBER THIS PRODUCTION LINE IS MAINLY USED FOR PILLOW FILLING, CUSHION AND CHAIRPAD FILLING. IT CAN BE OPERATED BY TWO OPERATORS, ADJUSTED BY FOOT SWITCHES, AND CONTROLLED BY SIEMENS PLC. QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: G-8444 PUNCHING MACHINE MODEL FST 11 MACHINE AVAILABLE FOR AUTOMATIC DRILLING IN SHEETS OF PU FOAM, MEMORY FOAM, LATEX, EVA, NEOPRENE. WITH 20mm THICKNESS UP 2 DRILLINGS PER SECOND ARE PERFORMED; E.G.: ONE MOULD FOR 2mm DIAM. HOLES AND 50mm WHEEL BASE OF PUNCH, 7mm X 3.5 CROSSED HOLE PITCH: THE MACHINE WILL PERFORM NO 2310 HOLES EACH DRILLING CYCLE WITH 4620 HOLES PER SECOND IN TOTAL. THAT MEANS THE MACHINE CAN DRILL A FOAM SHEET DIM. 1000X1100mm EACH 20 SECONDS WITH 92400 HOLES IN TOTAL. TWO DRILLING TYPES ARE POSSIBLE: CONTINUOUS DRILLING “A-PERFORM” (NO DISTANCE BETWEEN TWO IN SUCCESSION DRILLINGS –SEE TAB. 31A); CONTINUOUS DRILLING “B-PERFORM” (WITH FIXED DISTANCE BETWEEN TWO IN SUCCESSION DRILLINGS). THE DISTANCE CAN BE MODIFIED BY OPERATOR). UP TO 150 20mm-THICKNESS MATTRESSES CAN BE PRODUCED IN ONE HOUR; BY INCREASING THE THICKNESS THE PRODUCTION WILL REDUCE. QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: G-8444-A PUNCHING MACHINE MODEL FST 11 FOR LATEX MACHINE AVAILABLE FOR AUTOMATIC DRILLING IN SHEETS OF PU FOAM, MEMORY FOAM, LATEX, EVA, NEOPRENE. WITH 20mm THICKNESS UP 2 DRILLINGS PER SECOND ARE PERFORMED; E.G.: ONE MOULD FOR 2mm DIAM. HOLES AND 50mm WHEEL BASE OF PUNCH, 7mm X 3.5 CROSSED HOLE PITCH: THE MACHINE WILL PERFORM NO 2310 HOLES EACH DRILLING CYCLE WITH 4620 HOLES PER SECOND IN TOTAL. THAT MEANS THE MACHINE CAN DRILL A FOAM SHEET DIM. 1000X1100mm EACH 20 SECONDS WITH 92400 HOLES IN TOTAL. TWO DRILLING TYPES ARE POSSIBLE: CONTINUOUS DRILLING “A-PERFORM” (NO DISTANCE BETWEEN TWO IN SUCCESSION DRILLINGS –SEE TAB. 31A); CONTINUOUS DRILLING “B-PERFORM” (WITH FIXED DISTANCE BETWEEN TWO IN SUCCESSION DRILLINGS). THE DISTANCE CAN BE MODIFIED BY OPERATOR). UP TO 150 20mm-THICKNESS MATTRESSES CAN BE PRODUCED IN ONE HOUR; BY INCREASING THE THICKNESS THE PRODUCTION WILL REDUCE. QUANTITY AVAILABLE: 1 Learn More

G-1535 FOAM DRILLING MACHINE (FOAM PERFORATING MACHINE) MODEL: NOVA 26 TECHNICAL DATA: LOADING CONVEYOR: 2100 X 2100mm (82" X 82") UNLOADING CONVEYOR: 2100 X 2100mm (82" X 82") MAXIMUM DRILLING WIDTH: 2100mm (82") MAXIMUM DRILLING HEIGHT: 180mm (7") HOLE DIAMETER: 6 TO 30mm (1/4" TO 1.18") MAXIMUM CONTEMPORANEOUS HOLES NUMBER: 26 MINIMUM DISTANCE BETWEEN THE CHUCKS: 80mm POWER: 11 KW VOLTAGE: AS PER CUSTOMER WORKING PRESSURE BAR: 6 (90 PSI) NET WEIGHT: 2293 KGS (5000 LBS) FLOOR SPACE: 4375 X 3780 H 2204mm Learn More

WITH SPECIAL DEVICE TO FIX THE COVER AND ELECTRONIC TABLE WITH BALANCE IT IS A MACHINE FOR FILLING CUSHIONS, SACS, BAGS ETC. WITH ALL KIND OF MATERIALS: FEATHER, POLYESTER, BALL FIBER, POLYURETHANE, COTTON, WOOL, ETC. ADJUSTABLE SPEED: UP TO 4000 RPM THE PARTICULAR SHAPE OF THE OUTLET PIPE ALLOWS TO FILL AIR-TIGHT LINING PILLOWS THE COMMAND TO THE DUMPERS IS GIVEN BY A PEDAL THANKS TO THE SPECIAL DEVICE TO BLOCK THE COVER, THE OPERATOR HAS BOTH HANDS FREE AND CAN WORK ON TWO POSITIONS AT A TIME WHEN THE LINE IS EQUIPPED WITH TWO FILLING MACHINES (AS PER DRAWING BELOW) CONTROL PANEL SPECIAL SEWING MACHINE Learn More

REFERENCE NUMBER: M-5130 (1212155LY11UF) L AUTOMATIC ASSEMBLY MACHINE FOR BICONIC BONNELL SPRING UNIT MODEL: AM-120 AUTOMATIC ASSEMBLY MACHINE FOR BONNELL SPRING UNIT PRODUCTION: UP TO 28000 SPRINGS/8H SPRING TYPE: BONNELL QUANTITY AVAILABLE: 1 Learn More

TT-8043 CERUTTI-28/128 R ROTOGRAVURE PRINTING PRESS, 9 COLORS, 1200mm, YEAR 1982 TO 2012 RETROFIT 1. CERUTTI-28/128 R ROTOGRAVURE PRINTING PRESS 2. 9 COLORS 3. YEAR OF CONSTRUCTION: 1982 -1996 + 2012 RETROFIT 4. OFFER EX WORKS, EXCLUDING DISMANTLING LOADING: 5. AGAINST OFFER /GEGEN ANGEBOT 6. N°1 PB 32 - N°1 TR - N°6 ES 288 - N°2 EXTENDED ES 28/8 - N°1 EXTENDED ES 128 L2 - N°1 TR - N*1 RB 28 Learn More