G-8444 PUNCHING MACHINE MODEL FST 11
REFERENCE NUMBER: G-8444
PUNCHING MACHINE MODEL FST 11
MACHINE AVAILABLE FOR AUTOMATIC DRILLING IN SHEETS OF PU FOAM, MEMORY FOAM, LATEX, EVA,
NEOPRENE.
WITH 20mm THICKNESS UP 2 DRILLINGS PER SECOND ARE PERFORMED; E.G.: ONE MOULD FOR 2mm
DIAM. HOLES AND 50mm WHEEL BASE OF PUNCH, 7mm X 3.5 CROSSED HOLE PITCH: THE MACHINE WILL
PERFORM NO 2310 HOLES EACH DRILLING CYCLE WITH 4620 HOLES PER SECOND IN TOTAL. THAT MEANS THE
MACHINE CAN DRILL A FOAM SHEET DIM. 1000X1100mm EACH 20 SECONDS WITH 92400 HOLES IN TOTAL.
TWO DRILLING TYPES ARE POSSIBLE:
CONTINUOUS DRILLING “A-PERFORM” (NO DISTANCE BETWEEN TWO IN SUCCESSION DRILLINGS –SEE TAB. 31A);
CONTINUOUS DRILLING “B-PERFORM” (WITH FIXED DISTANCE BETWEEN TWO IN SUCCESSION DRILLINGS).
THE DISTANCE CAN BE MODIFIED BY OPERATOR).
UP TO 150 20mm-THICKNESS MATTRESSES CAN BE PRODUCED IN ONE HOUR; BY INCREASING THE THICKNESS
THE PRODUCTION WILL REDUCE.
QUANTITY AVAILABLE: 1
In stock
SKU
G-8444
REFERENCE NUMBER: G-8444
PUNCHING MACHINE MODEL FST 11
MACHINE AVAILABLE FOR AUTOMATIC DRILLING IN SHEETS OF PU FOAM, MEMORY FOAM, LATEX, EVA,
NEOPRENE.
WITH 20mm THICKNESS UP 2 DRILLINGS PER SECOND ARE PERFORMED; E.G.: ONE MOULD FOR 2mm
DIAM. HOLES AND 50mm WHEEL BASE OF PUNCH, 7mm X 3.5 CROSSED HOLE PITCH: THE MACHINE WILL
PERFORM NO 2310 HOLES EACH DRILLING CYCLE WITH 4620 HOLES PER SECOND IN TOTAL. THAT MEANS THE
MACHINE CAN DRILL A FOAM SHEET DIM. 1000X1100mm EACH 20 SECONDS WITH 92400 HOLES IN TOTAL.
TWO DRILLING TYPES ARE POSSIBLE:
CONTINUOUS DRILLING “A-PERFORM” (NO DISTANCE BETWEEN TWO IN SUCCESSION DRILLINGS –SEE TAB. 31A);
CONTINUOUS DRILLING “B-PERFORM” (WITH FIXED DISTANCE BETWEEN TWO IN SUCCESSION DRILLINGS).
THE DISTANCE CAN BE MODIFIED BY OPERATOR).
UP TO 150 20mm-THICKNESS MATTRESSES CAN BE PRODUCED IN ONE HOUR; BY INCREASING THE THICKNESS
THE PRODUCTION WILL REDUCE.
MODEL FST 11 CONSISTS OF:
(1) STEEL YOKE GROUP WITH SELF LUBRICANT HARDENED STEEL GUIDES THAT HOLD THE MOULD
(2) CONNECTING ROD GROUPS WITH ADJUSTABLE SWING, GEAR-BOX AND INVERTER WITH CONTROLLED AXIS
(1) WEAR-PROOF STEEL MOULD GROUP, WITH ONE DRILLING MOULD ON CUSTOMER REQUIREMENT (MORE MOULDS
ARE PROVIDED ON CUSTOMER REQUEST OPTION)
(1) FEEDING BELT WITH BRUSHLESS MOTOR AND CONTROLLED AXIS
(1) UNLOADING BELT WITH BRUSHLESS MOTOR AND CONTROLLED AXIS
(2) HEIGHT ADJUSTABLE COMPRESSION ROLLS (INPUT AND OUTPUT), PNEUMATIC CONTROLLED
(1) WASTE ASPIRATOR KITTED OUT OF 3-BAGS FILTER (OPTION D. 2000 WASTE-BIN FIXED ONTO EARTH ,
LOADING OPENING VIA VENTILATOR WITH 1-BAG FILTER.
(1) ELECTRIC BOARD WITH PLC AND OPERATOR PANEL (TOUCH SCREEN) FOR PARAMETERS SETTING.
WIRE CLOTH SAFETY GUARDS WITH TWO INTERLOCKING SLIDING DOORS.
DRILLING HEIGHT: 2/200mm
FEEDING/OUTPUT CONVEYOR LENGTH: 2100mm
WORKING DRILLING WIDTH: 1100mm
DRILLING SPEED: 2-6 METERS/MINUTE
POWER: 7 kW
TENSION: 400V
WORKING PRESSURE: 6 BARS
FOAM WASTE TO EVACUATE: APPROXIMATELY 1 CUBIC METER PER HOUR
FILLING TIME FOR 3-BAGS FILTER: 0.50' HOURS
FILLING TIME FOR D 2000 WASTE BIN (OPTIONAL): 8 HOURS
OPTIONAL:
D. 2000 WASTE-BIN FIXED ONTO EARTH , LOADING OPENING VIA VENTILATOR
WITH 1-BAG FILTER
PUNCHING MOULD ON SPECIFIC REQUEST OF CUSTOMER
QUANTITY AVAILABLE: 1
Write Your Own Review