Search results for: 'mach'

REFERENCE NUMBER: V-1467

3 SIDE MEDICAL BANDAGES PACKAGING MACHINE

 

THIS MACHINE IS SUITABLE TO PACK MEDICAL BANDAGES, MEDICINE, FOOD, COMMODITY, ETC.

INCLUDES:

SPECIAL POUCH ADJUSTING SYSTEM, GOOD FOR PACKING PRODUCTS WITH MULTIFORM SIZE, MULTIFORM SPECIFICATION.

COMPUTER CONTROL SYSTEM.

SPECIAL IN-FEED SYSTEM, IN –FEED POSITION CAN BE ADJUSTED DURING MACHINE OPERATION.

SLIPPAGE SEALING SYSTEM CAN ADJUST

 

PACKAGING FILM THICKNESS: 0.03 TO 0.08mm

SPEED: 40 TO 220 POUCHES PER MINUTE

PACKAGING FILM WIDTH: 100 TO 350mm

FIGURATION (APPROXIMATE): 4350 (L) X 1050 (W) X 1600 (H)

POWER: 3.2 KW

WEIGHT (APPROXIMATE): 500KG

SIZE OF POUCH: ADJUSTABLE, PER CUSTOMER.

 

QUANTITY: 1

Learn More

REFERENCE NUMBER: M-6249
LECTRA VECTOR 5000 AUTOMATED CUTTING MACHINE YEAR 1994

AUTOMATED CUTTING MACHINE
MAKE: LECTRA
MODEL: VECTOR 5000
YEAR: 1994

QUANTITY: 1

Learn More

REFERENCE NUMBER: M-1480

SLITTER REWINDER 1800mm WIDTH AND 1000mm DIAMETER-NEW MACHINE

 

TECHNICAL CHARACTERISTICS:

 

UNWINDER

MAXIMUM WIDTH: 1800mm

MAXIMUM DIAMETER: 1100mm

MINIMUM WIDTH: 420mm

MAXIMUM WEIGHT: 300kgs

CORE ID: 3”

 

REWINDER:

MAXIMUM WIDTH: 1800mm

MAXIMUM DIAMETER: 1000mm

MINIMUM WIDTH: 100mm

MAXIMUM WEIGHT PER SHAFT: 300kgs

CORE ID: 3”

 

MATERIAL:

TYPE: 100% PP NONWOVEN

MINIMUM: 10gsm

MAXIMUM: 150gsm

 

TENSION:

MAXIMUM: 2 PLI

 

SPEED:

METERS PER MINUTE: 250

 

DESCRIPTION:

REWINDER MACHINE FOR NONWOVEN ROLLS: UP TO 1000 mm DIAMETER AT UNWINDER AND 1200 mm AT REWINDER.

THE WORKSTATION OFFERS EASY ACCESS TO THE TENSION CONTROL AREA AS WELL AS THE TRIMMING AREA; THIS WAY, ANY MODIFICATION ON THE MATERIAL MEASUREMENTS CAN BE DONE SAFELY.

THE WORKSTATION WILL DELIVER MODULES OF ROLLED MATERIAL WITH SPECIFIC DENSITY, AND SEPARATED FROM EACH OTHER IN ORDER TO KEEP OPERATION CONDITIONS WITHIN REQUIRED QUALITY CONTROLS.

 

UNWINDER WITH SHAFT:

THERE IS A CENTRAL UNWINDING SYSTEM SUPPORTED BY A 3” STEEL EXPANSION SHAFT.

THERE IS A TENSION CONTROL SYSTEM THAT WORKS THROUGH A PNEUMATIC DISK BRAKE WITH A REPLACEABLE PADS SYSTEM.

THE UNWINDER HAS A PIVOTABLE ROLLER SYSTEM WHEREBY TENSION MAY BE MODIFIED ON ONE END TO REDUCE TENSION DIFFERENCE ON MATERIAL IF NECESSARY.

THE SAFETY CHUCK HAS A MECHANICAL MOVEMENT SYSTEM FOR SHAFT INSERTION.

THE UNWINDER HAS AN ULTRASONIC OR LASER SENSOR FOR A REAL MEASURING OF ROLL DIAMETER. THIS INFORMATION WILL HELP TO KEEP A SPECIFIC TENSION ON MATERIAL DURING ALL THE PROCESS.

 

CUTTING:

THE LONGITUDINAL SHEAR CUT SYSTEM GUARANTEES CLEAN AND SAFE TRIMMING AT EVERY MODULE. THE CUTTING SYSTEM ADAPTED TO THE MAIN TRANSMISSION GUARANTEES AN OVER SPEED THAT MAY BE REGULATED ACCORDING TO THE MATERIAL DURING EVERY STAGE OF PROCESS. THE PNEUMATIC ACTIVATION KNIVES WILL ALLOW A FAST MODIFICATION OF THE CUTTING MEASUREMENTS.

THIS ROLLER IS LOCATED AT AN EASY ACCESS AREA FOR THE OPERATOR TO BE ABLE TO MAKE CHANGES ON THE CUTTING WIDTH SAFELY. THE COUNTER KNIVES ARE ASSEMBLED TO THE ROLLER BY 3 SETSCREWS THAT FIX THEIR POSITION ON THE ROLLER. THE COUNTERKNIVES HAVE TWO FACES, SO WHEN THE FIRST FACE HAS AN IMPORTANT WEAR, IT WILL BE REMOVED FROM THE ROLLER AND THE NEW FACE WILL BE PLACED INSTEAD. THIS WILL EXTEND THE LIFESPAN OF THIS IMPORTANT COMPONENT.

SHEAR CUT KNIVES: THERE IS AN ADJUSTMENT MECHANISM TO PLACE THEM ON THE COUNTER KNIFE AND TO ADJUST THE CUTTING LOAD ACCURATELY. THE COUNTER KNIVES ARE SUPPORTED TOWARDS THE ROLLER IN ORDER TO OBTAIN A CUTOFF. THE SPEED ON THIS SYSTEM IS AN OVER SPEED IN RELATION TO THAT OF THE MATERIAL, IN ORDER TO GENERATE A CLEAN CUT.

LONGITUDINAL SHEAR CUT: PNEUMATIC ACTIVATION.

COUNTER KNIVES ROLLER WITH 3 SUPPORT PLANES FOR THE COUNTER KNIVES; 120° DISPLACEMENT FROM EACH OTHER.

19 SLITTERS ARE INCLUDED.

 

REWINDER:

PERIPHERAL REWINDER FOR NONWOVEN. THIS SYSTEM HAS A COUPLE OF MAIN ROLLERS WHERE THE MATERIAL ROLL IS FORMED.

THIS SYSTEM HAS LINEAR GUIDES FOR COMPACTION THROUGH WICH A NIP IS OBTAINED ON THE MATERIAL. THE REWINDER WILL HAVE A TRANSMISSION BASED ON A VECTORIAL-TYPE MOTOR ADAPTED TO A CYCLOIDAL REDUCER. THE TRANSMISSION HAS A MECHANICAL TORQUE CONTROL SYSTEM TO CONTROL THE TORQUE DIFFERENTIAL BETWEEN MAIN ROLLS.

THIS SYSTEM WILL HAVE A 3” EXPANSION SHAFT WHERE THE CARDBOARD CORES WILL BE INSERTED AND THE MATERIAL ROLLS WILL BE FORMED.

 

FABRIC OPENING SYSTEM:

THIS SYSTEM IS BASED ON A VARIABLE CURVATURE SYSTEM BY A CENTER KNOB AND IT IS A BAR- TYPE SYSTEM. THIS KNOB IS THERE TO CONTROL THE CURVATURE OF THE BAR WHERE MATERIAL SLIDES THROUGH. THE SLIDING BAR IS MADE OUT OF AN ULTRA LOW FRICTION MATERIAL IN ORDER TO GENERATE A SMOOTH SLIDING OF MATERIAL WITHOUT ANY TENSION ADDED. THIS WILL REDUCE WRINKLES IN A SIGNIFICANT WAY.

 

AUTOMATIC TENSION SYSTEM:

THERE IS AN OPEN LOOP AUTOMATIC TENSION CONTROL SYSTEM WITH A SENSOR FOR DIAMETER MEASURING. BY THIS SYSTEM, A REAL VALUE OF DIAMETER IS OBTAINED AT THE REWINDER. PRESSURE OF PNEUMATIC BRAKE VARIES DURING PROCESS.

 

MANUAL POSITIONING (OPTIONAL):

THE MANUAL POSITIONING SYSTEM IS BASED ON THE POSITION CONTROL OF THE COUNTER KNIVES. THE MODULE IS POSITIONED AT A DESIRED CUTTING PARAMETER AND THE COUNTER KNIFE WILL PHYSICALLY COME ACROSS IT. THE REAL POSITION OF MODULE WILL BE SHOWN ON A SCREEN THAT OPERATOR WILL BE CONSTANTLY SUPERVISING. THIS SCREEN WILL SHOW THE REAL MEASUREMENTS OF THE CARRIAGE IN RELATION TO THE LAST ONE OR AS AN ABSOLUTE REFERENCE. OPERATOR WILL BE ABLE TO RESET THE MEASUREMENT ONCE THE COUNTER KNIFE IS REPLACED AND WILL REPEAT THIS PROCESS EVERY TIME A COUNTER KNIFE IS POSITIONED.

A DISPLAY WILL SHOW THE DESIRED POSITION IN MILLIMETERS OR INCHES.

THIS SYSTEM CAN SHOW MEASUREMENT IN AN EITHER ABSOLUTE OR INCREASING WAY.

POSITION TOLERANCE: +/- 0.30 mm.

THE POSITIONER IS INSTALLED ON A SUPPORT THAT WILL BE LOCATED ON THE REWINDER BENCHES. THEREFORE, THERE WILL BE AN EASY ACCESS TO SYSTEM AND AN EASY REPETITION OF POSITIONING PROCESS.

 

UNLOADING ROLL TABLE:

A HYDRAULIC PIVOTEABLE TABLE WILL HAVE AS MAIN FUNCTION THE UNLOADING OF FINISHED ROLLS THAT THEN WILL BE LOCATED ON FLOOR LEVEL. THIS SYSTEM WILL EJECT THE ROLL AND THEN IT WILL BE RECEIVED AT THE PIVOTING TABLE FOR AN EFFICIENT UNLOADING.

THE UNLOADING TABLE WILL ALSO WORK AS A PROTECTION FOR THE OPERATOR.

THIS EQUIPMENT WILL HAVE SECURITY CURTAINS AT FRONT TO KEEP OPERATOR FROM ENTERING THE REWINDING AREA. THERE WILL BE AN EMERGENCY STOP BUTTON OR WIRE WHERE OPERATOR WORKS AND WILL ALSO HAVE PHYSICAL PROTECTION WITH SECURITY SWITCHES AT CUTTING AREA.

 

CONTROL:

HMI CENTRAL CONTROL SYSTEM WITH TOUCH SCREEN TO PROGRAM THE OPERATION CYCLE AND ALL THE MATERIAL CHARACTERISTICS. OPERATOR WILL HAVE ACCESS TO ALL OPERATION PARAMETERS IN ORDER TO BE ABLE TO MAKE CHANGES ON THE EQUIPMENT OPERATION CONDITIONS, AND THEREFORE OBTAIN MATERIAL ROLLS WITH SPECIFIC DENSITIES.

TRANSMISSION: VECTORIAL MOTO REDUCER WITH 1000:1 TORQUE.

DIGITAL METER COUNTER WITH DISPLAY AND AUTOMATIC STOP AT DEFINED DISTANCE.

 

DOCUMENTS INCLUDED:

THE MACHINE WILL BE DELIVERED WITH THE FOLLOWING DOCUMENT:

OPERATION MANUAL

MAINTENANCE MANUAL

SAFETY MANUAL

ELECTRIC DIAGRAMS

CONTROL SYSTEM MANUAL

PLC BACKUP

REQUIREMENTS:

ELECTRIC 15 KW, 440 VAC, TRI PHASE.

PNEUMATIC 6 BAR - 60 LTS. / MIN.

 

DUCTS AND WIRING:

DUCTS AND WIRES RUNNING FROM UTILITIES SOURCES TO THE CONTROL PANEL AND FROM THE CONTROL PANEL TO THE MACHINE WILL BE AT CUSTOMER COSTS AND MUST BE DONE ACCORDING TO THE INSTRUCTIONS SHOWN IN OUR DIAGRAMS

 

SIEMENS PLC

Learn More

C-4013 VILLARS AG SCATTER- COATING AND LAMINATING MACHINE, WORKING WIDTH 1000mm, YEAR 1994

MAKE: VILLARS AG
YEAR: 1994
WORKING WIDTH: 1000mm
WORKING SPEED: 0 TO 10 M/MIN
ELECTRICAL POWER: 3 X 400 VOLT + PN + PE, 50 HZ
POWER: 140 KW
WEIGHT: 8637 KGS

QUANTITY: 1

Learn More

TWO SETS OF MOTORS X & Y.
ADJUSTABLE FRAME
VOLTAGE: 220 V
Widths 80 x 90 and 105 x 93 inches

Learn More

REFERENCE NUMBER: G-7323 TASLAN TEXTURIZING MACHINES-REBUILT ELTEX TEXTURING POSITIONS TYPE A+ EQUIPPED WITH DUPONT JETS TYPE XV YEARS 1985-1997 TOTAL NUMBER OF POSITIONS: 24 1 MACHINE 8 POSITIONS 1 MACHINE 8 POSITIONS 1 MACHINE 8 POSITIONS QUANTITY AVAILABLE: 3

Learn More

REFERENCE NUMBER: P-2360 TRUETZSCHLER DK-903 CARDING MACHINE YEAR 2001 TRUETZSCHLER TYPE: DK-903 CARDING MACHINE YEAR: 2001 COILER SIZE: 820mm COILER KH: 750/800 SINGLE DELIVERY COILER COTTON CARD MACHINE STOPPED THIS MONTH ON THE MILL FLOOR AVAILABLE IMMEDIATELY QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: P-2532 MULLER MDR 42 CROCHET MACHINES YEAR 2003 to 2004 WIDTH 600mm GUAGE 15 MULLER MODEL: MDR 42 CROCHET MACHINES YEAR: 2003 to 2004 GUAGE: 15 12 ELECTRONIC WEFT BARS WIDTH: 600mm COMPLETE WITH ELASTIC THREADS DEVICE CREEL 264/22 POSITIONS MACHINES IN PERFECT WORKING CONDITION AND COMPLETE OF ALL THEIR PARTS AND ACCESSORIES QUANTITY AVAILABLE: 4 Learn More

REFERENCE NUMBER: C-2252 COMEZ MACHINE 408 DETAILS: COMEZ MACHINE MODEL: 408 GAUGE: 15 THE MACHINE CONDITION ARE AVERAGE AS THEY ARE OLD BUT ARE IN 100% WORKING CONDITION QUANTITY AVAILABLE: 2 Learn More

REFERENCE NUMBER: M-0017 AUTOMATIC VACUUM FOAMING BATCH MACHINE AUTOMATIC VACUUM FOAMING BATCH MACHINE, USES BATCHING TECHNOLOGY, FOAMING IN VACUUM CONDITION. IT IS COMPOSED OF STORAGE TANKS, BATCHING, MIXING, VACUUM, MOULD, AND COMPUTERIZED CONTROLLING SYSTEMS. USES NUMERICAL CONTROL DURING THE WHOLE PRODUCTION. IT IS USED FOR MAKING ALL KINDS OF FOAM. ADVANTAGE: *USING THE SAME PPH OF WATER, FOAMING DENSITY WILL BE LOWER: ≤30% * REDUCES THE CHEMICAL CONSUMPTION, AND SAVES ON THE FOAMING COST: ≤20% * SUCTION AND FILTRATE THE FOAMING AIR. * MONITOR THE WHOLE FOAMING BY WIRED TELEVISION. * WITH NUMERICAL CONTROL WITH ACCURATE AND CONVENIENT MEASURING DURING THE WHOLE PRODUCTION. EASY AND STABLE TO OPERATE THE MACHINE. OUTPUT 1 BLOCK / 12MIN CHEMICALS 8 GROUPS MIXER 220 KGS MOULD SIZE 2200（L）X 1800（W）X 1300 (H) mm 2200（L）X 1500（W）X 1300 (H) mm LIFTING PLATFORM SPEED ≤3M/MIN ( AUTOMATIC REGULATION ) MAX SUCTION 0.05MPA POWER 42KW QUANTITY AVAILABLE: 1 Learn More