Search results for: 'ver'

REFERENCE NUMBER: K-8416

G1 TONELLO 330 "CENTRIFUGING" INDUSTRIAL WASHING MACHINE-USED

G1 TONELLO 330

“CENTRIFUGING” INDUSTRIAL WASHING MACHINE

FRONTAL TYPE

FOR CHEMICAL “STONE WASH”

CAPACITY LIT. 3.300

MOD. TONELLO G1 330

GENERAL DESCRIPTION:

TONELLO G1 IS A MACHINE WITH HIGH-SPEED HYDRO-EXTRACTION (600 R.P.M.) AND IT IS EQUIPPED WITH AUTOMATIC SELF-BALANCING SYSTEM

TONELLO G1 IS SUPPLIED WITH “SETTABLE INVERTER”

ROTATION SPEED FROM 0 TO 55 R.P.M

ALSO SETTING THE CENTRIFUGING SPEED FROM 0 TO 600 R.P.M.

WITH TIME OF CENTRIFUGE PROGRAMMABLE BY INDUSTRIAL PC

THE ACCESS MAIN DOOR TO THE DRUM IS VERY WIDE, IN ORDER TO EASY GARMENTS LOADING AND UNLOADING OPERATION

OPENING AND CLOSING ARE PNEUMATIC

DOUBLE TILTING SYSTEM FOR GARMENTS LOADING AND UNLOADING

DRIVING SYSTEM IS SITUATED ON THE UPPER PART OF THE MACHINE

WITH PROPER MATERIAL AND MOTORS SUITABLE TO WORK AT LOW AND HIGH R.P.M.

1 TANK FOR THE PREPARATION OF AUXILIARY PRODUCTS WITH CAPACITY OF LITTERS 180 EQUIPPED WITH ELECTRO-PUMP AND PNEUMATIC VALVES FOR THE SENT ONE

THE DRAINAGE IN DRAIN AND AUTOMATIC RINSES N° 2 WATER INLETS COMPLETE WITH PNEUMATIC VALVE- MECHANICAL WATER-COUNTER DIRECT HEATING AND COOLING SYSTEM

AUTOMATION WITH MICROPROCESSOR

TECHNICAL DATA TONELLO G1 330

DRUM DIMESION                           

-DRUM HOLING SHEET                                   mm                        4

THICKNESS         

-DIAMETER                                                   MM                       1900

-DEPTH                                                        MM                       1150

-VOLUME                                                      LT.                       3300

-DOOR DIAMETER                                           MM                       1020

-MAXIMUM LOADING                                        KG.                      120/130

CAPACITY           

BASKET SPIN SPEED                                        RPM                      0-600

DIRECT STEAM CONNECTION                               Ø                        1" 1/4

WATER INLET CONNECTION                                 Ø                        2 x 2

COMPRESSED AIR INLET                                     Ø                        1/4"

CONNECTION   

STEAM IN MAXIMUM PRESSUREBAR                      BAR                       6

WATER IN MAXIMUM PRESSURE                           BAR                       4

COMPRESSED AIR IN MAXIMUM                           BAR                       8

PRESSURE          

POWER INSTALLED                                           KW                        22

3-PHASE VOLTAGE                                           VOLT/HZ                 400/50

PRODUCTS TANK Ø 240 H 400                             LT.                         80

TANK RINSING VALVE                                         Ø                         1/2"

MACHINE SIZE                  

-WIDTH                                                          MM                        2500

-WIDTH WITH ELECTRICAL PANEL                         MM                        2980

-DEPTH                                                           MM                        2710

-HEIGHT                                                          MM                        3000

REFERENCE NUMBER: M-3703

LAROCHE TEARING MACHINE

TEARING MACHINE

4 DRUMS

LAROCHE

MACHINE IN VERY GOOD CONTION

WIDTH OF DRUMS: 1000mm

NUMBER OF PINS PER SQUARE INCH

CYLINDER  1:      11 PINS

CYLINDER 2:       15 PINS

CYLINDER 3:       15 PINS

CYLINDER 4:       15 PINS

DIMENSIONS OF LAG : 106mm x 85mm

MOTORS

MOTOR CYLINDER 1:      55CV

MOTOR CYLINDER 2:      55CV

MOTOR CYLINDER 3:      40CV

MOTOR CYLINDER 4:      30KW

3 CYLINDERS YEAR 1984

ONE CYLINDER YEAR 1997

THERE IS AN EXTRA ROLL WITH 18 PINS BY INCH

THERE ARE 34 LAGS FOR EACH CYLINDER  

THERE IS ONE MOTOR EACH CYLINDERNOTHI

EACH MACHINE HAS FAN INCLUDED

REFERENCE NUMBER: P-4334

WET WIPES PACKING MACHINE

Model: P100
Machine Characteristic
Control system: Multi-Axis Motion Controller
Drive element: Full servo motor
Operate interface: 8" LCD touch screen
End heat seal: vertical seal servo motor
End seal reciprocation: left & right servo motor
Film feeding: servo motor
Pushrod feeding: servo motor
Back seal:2 sets heat seal
Label tapping: servo motor, adjust online

Specifications
Suitable packing material: PET/PE BOPP PET/AL/PE etc. heat-seal material
Packing Film specification: max W420mm,φ350mm
Diameter of ventilating shaft :3"
Suitable label: transparent label& opaque label
Label size: max  W100mm,φ400mm
Diameter of ventilating shaft:3"
Package size: L100mm-350mm W50-160mm H5-80mm
Production speed: 40-80 bags/min     design 100 bags/min    depend  on the production
Machine space: L5300mm W1000mm H2100mm
Power: AC380V 50/60Hz 7.5KW
Compressed air:0.6-0.8Mpa  200L/min
Machine net weight: 1200kg

Option equipment: Coding machine. Safety labeling machine

QUANTITY: 1

REFERENCE NUMBER: F-1430

FEATHER FILLING MACHINE MODEL SR-180

PRODUCT FEATURES

•              FULLY ENCLOSED DESIGN TO KEEP SURROUNDINGS CLEAN AND TO SAVE MATERIAL

•              AUTOMATIC WEIGHING WITH ACCURATE LOAD CELL TO ENSURE PRODUCTION QUALITY

•              FILLING TIME IS 2 TO 5 SECONDS

•              NICE DESIGN SUITABLE FOR ALL KINDS OF FABRIC

•              CE CERTIFICATE

•              TYPE : SR-180/280/380/480

•              DIMENSION: 1200 x 1500 x 2000MM

•              VOLTAGE: 200/380/415V 50/60HZ 3PHASE

•              POWER: 2.2 KW

•              FILLING RANGE: 0.5-10 /1-50 G, DEPENDING ON THE MATERIAL

•              ACCURACY: ±0.2G/±0.5G

•              AIR PRESSURE: 0.5-0.8MPA

•              THE COMPUTERIZED DOWN & FEATHER WEIGHING FILLING MACHINE IS MAINLY USED TO FILL JACKETS, SLEEPING BAGS, CUSHIONS, PILLOWS, PADS, COMFORTERS ETC WITH A COMPUTERIZED WEIGHING SYSTEM.

•              TWO HOPPER-SYSTEM FOR CONSTANT SUPPLY.

•              THE VACUUM FILLING FUNCTION DOES NOT HURT THE MATERIAL AND KEEPS THE ORIGINAL ELASTICITY AND SOFT HAND FEELING.

•              ACCURATE WEIGHING RESULTS; THE TOLERANCE IS WITHIN 0.2 TO

0.5 GRAM (DEPENDING ON THE RANGE OF MEASURE). IT CAN BE ADJUSTED ACCORDING TO THE PRODUCTION REQUIREMENT AND CHOOSE GROUP ERROR OR SINGLE PIECE ERROR FROM THE CONTROL PANEL

•              THE WHOLE LINE CAN BE HANDLED BY ONLY 1 OPERATOR BY VERY SIMPLE

OPERATION WHICH SAVES YOU A BIG AMOUNT OF LABOR COSTS.

•              ALL THE MATERIALS ARE INSIDE THE HOPPERS WITHOUT PRODUCING ANY DUST THAT AFFECTS THE WORKING AREA

•              KEY ELECTRICAL COMPONENTS IMPORTED

•              THE WHOLE LINE OPERATION IS CONTROLLED BY PLC SYSTEM

•              ACCORDING TO DIFFERENT QUANTITY AND QUALITY PRODUCTION REQUIREMENTS THE MACHINE CONTROL PANEL CAN BE SET UP FOR 100 GROUPS OF RECIPES AND EACH RECIPE CAN BE 50 SETS OF DIFFERENT WEIGHT VALUE FOR FILLING OPTIONS

•              THE AVERAGE FILLING TIME CAN BE 4 TO 10 SECONDS (DEPENDING ON THE ACCURACY) AND THE FILLING TIME CAN BE ADJUSTE

•              DIFFERENT REQUIREMENTS OF THE CUSTOMER CAN BE CONSIDERED BY OUR PROFESSIONAL ENGINEERS TO WORK ON OUR MACHINES SO THEY ARE SUITABLE FOR YOUR PARTICULAR NEEDS

•              MATERIAL HOPPER:        1200 x 1500 x 2000MM                               1PCS

•              WEIGHING SYSTEM:        1200 x 400 x 1000MM                  1PCS

•              FILLING TABLE :1200 x 550 x 1500                                            1PCS

•              PLC CONTROL SYSTEM AND CONTROL PANEL:                     1SETS

•              BLOWER:                                                                                             1PCS

•              PIPE SYSTEM

REFERENCE NUMBER: F-1432

FEATHER FILLING MACHINE MODEL SR-6

PRODUCT FEATURES

•              FULLY ENCLOSED DESIGN TO KEEP SURROUNDINGS CLEAN AND TO SAVE MATERIAL

•              AUTOMATIC WEIGHING WITH ACCURATE LOAD CELL TO ENSURE PRODUCTION QUALITY

•              FILLING TIME IS 2 TO 5 SECONDS

•              NICE DESIGN SUITABLE FOR ALL KINDS OF FABRIC

•              CE CERTIFICATE

•              ITEM NO.: SR-6

•              DIMENSION: APPROX. 6400×2500×3000MM

•              VOLTAGE: 200/380415V 50/60HZ 3PHASE

•              POWER: 11KW

•              FILLING RANGE: 2-2000 G, DEPENDING ON THE MATERIAL

•              ACCURACY: ±10G

•              AIR PRESSURE: 0.5-0.8MPA

•              THERE ARE 4 WEIGHING SYSTEMS AND ONE WORKING TABLE FOR THE DOWN FEATHER FILLING LINE

•              IT IS MAINLY USED TO MAKE DOWN FEATHER QUILT

•              IT INCLUDES TWO AUTOMATIC FILLING TABLES, THE WORKING TABLE INCLUDES PNEUMATIC CLAMPING DEVICE FOR TWO FILLING PIPES, COMPOUND SHOE CLAMPING DEVICE, RING CLAMPING DEVICE AIR SUCTION, COMPRESSED AIR RING INJECTOR

•              THE FEATHER DOWN FILLING USES VACUUM METHOD STYLE HELPS KEEP THE ORIGINAL MATERIAL SOFT, ELASTIC AND HAND TACT AND AVOIDS THE FEATHER BEING DAMAGED DURING THE FILLING PROCEDURE

•              THE ACCURACY CAN BE CONTROLLED WITHIN 10 GRAMS (WEIGHING RANGE:2000 GRAMS), WHICH CAN BE ADJUSTED BY SINGLE SET OR SINGLE PIECE ACCORDING TO THE REQUIREMENTS OF DIFFERENT PRODUCTS. IT HELPS QUALITY CONTROLLING AND AVOIDS MATERIAL WASTE

•              SIMPLE OPERATION THAT SAVES LABOR COST; THE WHOLE MACHINE CAN BE HANDLED BY ONLY ONE OPERATOR.

•              KEEPS CLEAN OF THE SURROUNDING ENVIRONMENT BECAUSE ALL THE FILLING MATERIALS ARE KEPT INSIDE OF THE HOPPER

•              THE WHOLE MACHINE IS CONTROLLED BY PLC SYSTEM WITH AN ENGLISH OPERATION MENU WHEREIN 100 RECIPES CAN BE SET UP IN ADVANCE TO THE CONTROL SYSTEM. EACH RECIPE CAN BE SET UP TO ABOUT 80 SETS OF WEIGHT VALUE WHICH IS SUITABLE FOR VERY COMPLICATED PRODUCT DESIGN WITHIN ONE PIECE

•              THE AVERAGE MATERIAL MEASURING TIME IS 4 TO 6 SECONDS. THE FILLING TIME CAN BE ADJUSTED AS DESIRED SO THAT TWO FILLERS CAN BE HANDLED BY ONE OPERATOR.

•              OUR PROFESSIONAL R&D GROUP CAN DESIGN THE INDIVIDUAL FILLINGS ACCORDING TO YOUR REQUIREMENTS

EQUIPMENT INCLUDED:

•              FEEDING SYSTEM: 2400 x 1500 x 3300MM          1PCS

•              WEIGHING SYSTEM: 800 x 1000 x 1200MM         2PCS

•              PLC CONTROL SYSTEM & CONTROL PANEL:           1 SETS

•              BLOWER:                                                                             4PCS

•              PIPE:                                                                                      1SET

•              AUTOMATIC WORKING TABLE:                                   2SETS

•              ENGLISH EDITION ARTICLE AND VIDEO FOR OPERATION DESCRIPTION

REFERENCE NUMBER:   G-8230

HIGH-TEMPERETURE AND HIGH-PRESSURE YARN DYEING MACHINE 40KG

DESIGNED FOR DYEING, BOILING OFF, BLEACHING, AND WATER WASHING, ETC. SUITABLE FOR HANK YARN, BOBBIN OR RAW STOCK FIBER

MACHINE TYPE: VERTICAL CYLINDER

VAT DIAMETER: Ф600mm

CONE QUANTITY: 7 X 7 = 49 CONES

WORKING TEMPERATURE: 130C

MAX WORKING PRESSURE: 0.4MPA

BOTH RATIO: 1:7 TO 9

WITH COMPUTERIZED CONTROL SYSTEM

HEAT EXCHANGING: COIL TYPE HEAT EXCHANGER, WHICH CAN BE USED FOR EITHER HEATING OR COOLING.

HEAT EXCHANGING SPEED: WHEN THE HEATED STEAM PRESSURE IS 0.4MPA, 40MINUTES WILL BE REQUIRED FOR THE LIQUID INSIDE THE DYEING BARREL RAISING FROM 20^OC TO 130^OC. WHEN THE COOLING WATER PRESSURE IS 0. 3MPA AND THE WATER TEMPERATURE IS 20 ^OC, 40 MINUTES WILL BE REQUIRED FOR THE LIQUID INSIDE THE DYEING BECK TO LOWER FROM 130^OC TO 80^OC.

RECYCLING OF DYEING LIQUID: THE POSITIVE AND NEGATIVE RECYCLING OF DYEING LIQUID WILL BE ADJUSTED BY THE CYLINDER THROUGH THE SWITCHING DEVICE INSIDE THE CENTRIFUGAL PUMP.

SEALING OF BOILER: RUBBER ADHESIVE

THE WORKING PRESSURE INSIDE THE TANK WILL MAKE THE RUBBER SEAL CLOSELY TO ATTACH THE FLANGE. THE CONICAL SURFACE OF THE TANK MOUTH IS TO ENHANCE THE SEALING.

OPENING OF TANK COVER: FIRST OPEN THE AIR VALVE TO RELEASE THE PRESSURE INSIDE THE BOILER. WAIT UNTIL NO EXHAUSTED AIR GOING THRU THE EXHAUST VALVE AND THE READING OF PRESSURE GAUGE IS ZERO, WITHDRAW THE WRENCH HANDLE, OPEN THE CLAMPING HOOP TO REMOVE THE FLANGE; AND THEN OPEN THE COVER WITH DRAG WEIGHT. THE COVER WILL BE CLOSED.

CONFIGURATION:

1. ELECTRICAL CABINET: STAINLESS STEEL CABINET, PLASTIC COATING

2. ELECTRICAL COMPONENTS: SIEMENS, OMRON

3. COMPUTER: HG COMPUTER (MADE IN CHINA)

4. ELECTROMAGNETIC VALVE: TAIWAN YADEKE

5. PUMP: CENTRIFUGAL PUMP

6. MOTOR: WANNAN MOTOR

7. TEMPERATURE CONTROL: COMPUTER CONTROL, WITH HEATING, COOLING, KEEPING WARM, ETC. FUNCTION.

8. HEAT EXCHANGER: INTERNAL COIL HEATING

9. VALVE: STAINLESS ANGLE VALVES, PNEUMATIC BUTTERFLY VALVES

10. ONE CARRIER BASKET

11. MACHINE BODY MATERIAL: STAINLESS STEEL, 316 LITERS

12. ACCESSORIES: SEAL RING FOR DYE VAT, SEAL FOR MAIN PUMP, SEAL FOR REVERSING SHAFT

QUANTITY: 1

REFERENCE NUMBER: M-3279

TUFTING GUN

TUFTING GUN IS PRECISION MADE, HIGH-SPEED, LIGHT WEIGHT, VERSATILE, MANEUVERABLE ARE JUST A FEW WORDS TO DESCRIBE THIS ENGINEERING MARVEL WHICH VIRTUALLY OUT-DATES ALL OTHER TUFTING MACHINES.

HAND-TUFTED CARPETS CAN BE PRODUCED AT UNBELIEVABLE SPEEDS WITH THE UTMOST ACCURACY. LIMITED ONLY BY IMAGINATION, CARPETS CAN BE CREATED IN VARIOUS HEIGHTS, IN EITHER CUT OF LOOP PILE OF LIGHT, HEAVY, OR UNCONVENTIONAL YARNS. WITH COMPLETE MANEUVERABILITY, TUFTING CAN BE IN ANY DIRECTION INCLUDING WORK IN LINE, TWISTED MOVEMENTS, OR CIRCULAR WORK OF 360 WITHOUT REMOVING THE CUT FROM THE CANVAS.

MODEL TG FEATURES:

LIGHTWEIGHT, INCLUDING MOTOR

SELF-SHARPENING CUTTING BLADE

UP TO 2050 STITCHES/RPM

CHANGES FROM CUT- TO LOOP-PILE IN SECONDS

DISSEMBLES AND REASSEMBLES IN MINUTES

COMPLETE MANEUVERABILITY

PILE HEIGHTS: CUT - 16-40mm LOOP - 8-40mm

AVAILABLE IN 110V 60 CYCLE, OR 220V/230V 50 CYCLE

SHIPPING WEIGHT: 12LBS AND DIMENSIONS: 15x15x10"

S-1173 PP FILM EXTRUDER, WIDTH 2000 TO 2200mm

PP FILM EXTRUDER
LONGER LIFE OF SCREW & BARREL
AC INVERTOR & MOTOR WHICH SYNCHRONIZES THE ENTIRE EXTRUDER
PP & LD CAN BE PROCESSED DUE TO ITS SPECIAL SCREW DESIGN
LATEST TECHNOLOGY USED TO FORCE THE MELT INTO THE DIE VERY EFFECTIVELY
TAKE UP SMALL AREA
SIMPLE OPERATION
HIGH OUTPUT CAPACITY
LOW MAINTENANCE
ITEM 001
MODEL: YSJ-70
T-DIE WIDTH: 600mm
DIA OF SCREW: 70mm
RATIO OF L/D: 30
ROTATION SPEED OF SCREW: 20 TO 90 R/MIN
DRAWING RATIO: 10-Apr
POWER CONSUMPTION: 100 KW/60 KW
MAX OUTPUT CAPACITY: 1200 KG/24H
MACHINE DIMENSION (L*W*H): 25000 X 2000 X 2000mm

QUANTITY: 1

ITEM 002
MODEL: YSJ-80
T-DIE WIDTH: 800mm
DIA OF SCREW: 80mm
RATIO OF L/D: 33
ROTATION SPEED OF SCREW: 20 TO 90 R/MIN
DRAWING RATIO: 10-Apr
POWER CONSUMPTION: 130 KW/80 KW
MAX OUTPUT CAPACITY: 2100 KG/24H
MACHINE DIMENSION (L*W*H): 26000 X 2200 X 2100mm

QUANTITY: 1

ITEM 003
MODEL: YSJ-90
T-DIE WIDTH: 1000mm
DIA OF SCREW: 90mm
RATIO OF L/D: 33
ROTATION SPEED OF SCREW: 20 TO 90 R/MIN
DRAWING RATIO: 10-Apr
POWER CONSUMPTION: 150 KW/100 KW
MAX OUTPUT CAPACITY: 3000 KG/24H
MACHINE DIMENSION (L*W*H): 27000 X 2200 X 2000mm

QUANTITY: 1

S-1172 PP MONOFILAMENT EXTRUDER, WIDTH 3000mm

PP MONOFILAMENT EXTRUDER
LONGER LIFE OF SCREW & BARREL
AC INVERTOR & MOTOR WHICH SYNCHRONIZES THE ENTIRE EXTRUDER
PP & LD CAN BE PROCESSED DUE TO ITS SPECIAL SCREW DESIGN
LATEST TECHNOLOGY USED TO FORCE THE MELT INTO THE DIE VERY EFFECTIVELY
TAKE UP SMALL AREA
SIMPLE OPERATION
HIGH OUTPUT CAPACITY
LOW MAINTENANCE
ITEM 001
MODEL: YSJ-70
DIA OF FIBER: 0.13mm TO 0.30mm
DIA OF SCREW: 70mm
RATIO OF L/D: 30
ROTATION SPEED OF SCREW: 20 TO 90 R/MIN
DRAWING RATIO: 10-Apr
COOLING MODE: WATER COOLING
POWER CONSUMPTION: 100 KW/65KW
MAX OUTPUT CAPACITY: 1400 KG/24H
MACHINE DIMENSION (L*W*H): 20000 X 3000 X 2500mm

QUANTITY: 1

ITEM 002
MODEL: YSJ-80
DIA OF FIBER: 0.13mm TO 0.30mm
DIA OF SCREW: 80mm
RATIO OF L/D: 33
ROTATION SPEED OF SCREW: 20 TO 90 R/MIN
DRAWING RATIO: 10-Apr
COOLING MODE: WATER COOLING
POWER CONSUMPTION: 130 KW/80 KW
MAX OUTPUT CAPACITY: 2000 KG/24H
MACHINE DIMENSION (L*W*H): 23000 X 3000 X 2500mm

QUANTITY: 1

ITEM 003
MODEL: YSJ-90
DIA OF FIBER: 0.15mm TO 0.30mm
DIA OF SCREW: 90mm
RATIO OF L/D: 33
ROTATION SPEED OF SCREW: 20 TO 90 R/MIN
DRAWING RATIO: 10-Apr
COOLING MODE: WATER COOLING
POWER CONSUMPTION: 150 KW/100 KW
MAX OUTPUT CAPACITY: 3000 KG/24H
MACHINE DIMENSION (L*W*H): 27000 X 3000 X 2500mm

QUANTITY: 1

P-3457 THIBEAU CARD CA11-R3P5PP (LL), WIDTH 3500mm, YEAR 1997

THIBEAU
MODEL: CA 11
TYPE: R3P5PP (LL)
CARDING MACHINE
YEAR: 1997
WORKING WIDTH: 3500mm
DELIVERY WEIGHT 26 to 40 GR/SQM
DELIVERY SPEED UP TO 90m/min
PRODUCTION CAPACITY APPROXIMATELY 700 KILOGRAMS PER HOUR
WEIGHING SYSTEM ACE
WIDTH: 3500mm
TRUTZSCHLER
EXACTAFEED FBK
WIDTH: 3500mm
THE MACHINES ARE IN VERY GOOD CONDITION BECAUSE THEY HAVE BEEN USED FOR SOME MONTHS ONLY
NOW THEY ARE DISMANTLED AND STORED IN DRY WARE HOUSE
THE CARDING MACHINE IS PACKED INTO WOODEN BOXES

QUANTITY: 1