Search results for: 'Can a'

Related search terms: can; can c; Can I; can li; Cans

TT-1585 ACRYLIC SPINNING PLANT, YEAR 2001 TO 2007

Compare

TT-1585 ACRYLIC SPINNING PLANT, YEAR 2001 TO 2007 DISMANTLED, READY FOR SHIPPING REQUIRES 20 TO 22 40 FOOT HIGH CUBE CONTAINERS TO SHIP Learn More
T-9989 TRUTZCHLER - TOYOTA - MURATA COMPLETE 37000 SPINDLE RING SPINNING PLANT, YEAR 2018

Compare

T-9989 TRUTZCHLER - TOYOTA - MURATA COMPLETE 37000 SPINDLE RING SPINNING PLANT, YEAR 2018 WITH THE TOP OF THE LINE UP TRUTZSCHLER BACK PROCESS, TOYOTA RING FRAME AND MURATEC QPRO LINK CORNER Learn More
T-6552 MASK AIR TIGHTNESS TESTER

Compare

REFERENCE NUMBER: T-6552

MASK AIR TIGHTNESS TESTER

MASK AIR TIGHTNESS TESTER

HOW TO CHOOSE A HIGH-QUALITY MASK NOT ONLY DEPENDS ON THE FILTERING EFFICIENCY OF THEMASK, BUT ALSO TO CONFIRM WHETHER THE MASK IS COMPLETELY IN CONTACT WITH THE FACE, OTHERWISE AEROSOL PARTICLES SUCH AS GERMS THAT HAVE NOT BEEN FILTERED BY THE MASK WILL BE INHALED FROM THE INADEQUATE ADHESION. THEREFORE, IT IS VERY IMPORTANT TO CHECK THE WEARING STATUS OF THE MASK. THE EUROPEAN AND AMERICAN COUNTRIES HAVE LISTED THE APPLICATION TEST OF THE MASK AS A STRONG INSPECTION ITEM.

FOR EXAMPLE, THE N95 MASK IS ONE OF 9 TYPES OF PARTICULATE PROTECTIVE MASKS CERTIFIED BY NIOSH (NATIONAL INSTITUTE OF OCCUPATIONAL SAFETY AND HEALTH). "N" INDICATES OIL RESISTANCE."95" INDICATES THAT THE PARTICLE CONCENTRATION IN THE MASK IS MORE THAN 95% LOWER THAN THAT OF THE PARTICLES OUTSIDE THE MASK WHEN EXPOSED TO THE SPECIFIED NUMBER OF SPECIAL TEST PARTICLES. N95 IS NOT A SPECIFIC PRODUCT NAME, AS LONG AS IT MEETS THE N95 STANDARD AND PASSES THE NIOSH REVIEW, IT CAN BE CALLED "N95 MASK".

N95 TYPE MASKS, IN ADDITION TO THE FILTERING EFFICIENCY OF THE MASKS, THE CLOSENESS OF THE MASKS TO THE FACE IS ONE OF THE IMPORTANT FACTORS THAT DETERMINE THE EFFECTIVENESS OF THE USE OF THE MASKS. THE SUITABILITY OF DIFFERENT TYPES OF MASKS FOR THE HUMAN FACE VARIES GREATLY.

THEREFORE, BEFORE USING A MASK, THE SUITABILITY OF THE MASK SHOULD BE CHECKED FIRST. DURING THETIGHTNESS TEST OF THE WEARER'S FACE, ENSURE THAT AIR CAN PASS IN AND OUT THROUGH THE MASK WHEN IT IS CLOSE TO THE EDGE OF THE FACE. THE MASK TIGHTNESS TESTER CAN QUICKLY COMPLETE THE TIGHTNESS TEST OF RESPIRATORS SUCH AS MASKS TO ENSURE THAT IT PROVIDES GOOD PROTECTION PERFORMANCE. IT CONFORMS TO THE CHINESE RESPIRATOR STANDARD GB2626-2019 STANDARD, OSHA / CSA STANDARD AND CHINA GENERAL ADMINISTRATION OF QUALITY SUPERVISION, INSPECTION AND QUARANTINE "GB 19083-2010 TECHNICAL REQUIREMENTS FOR MEDICAL PROTECTIVE MASKS" JOINTLY ISSUED BY THE CHINA NATIONAL STANDARDIZATION ADMINISTRATION COMMITTEE.

ADHESION (SUITABILITY TEST): THE MASK DESIGN SHOULD PROVIDE GOOD ADHESION. THE OVERALL FIT FACTOR OF THE MASK SHOULD NOT BE LESS THAN 100. THIS TEST THE REQUIREMENTS WERE FORMALLY IMPLEMENTED ON AUGUST 1, 2011.

MASK TIGHTNESS TESTER USES CNC TECHNOLOGY, SUITABLE FOR 100 / 99 / P3 / HEPASERIES MASKS DISPOSABLE FILTER MASK TIGHTNESS TEST (INCLUDING DISPOSABLE DUST MASKS SUCH ASN95 / N90 / KN95), GAS MASKS / BREATHING MASKS, ADHESIVENESS TEST OF HALF-MASK AND FULL FACE MASK, INDEPENDENT OR COMPUTER CONTROL, FIVE LANGUAGES SWITCH DISPLAY, EQUIPPED WITH MULTIPLE COMMUNICATION INTERFACES (USB, ETHERNET), WIFI CAN ALSO BE ENABLED, ONE COMPUTERCAN CONTROL FOUR INSTRUMENTS AT THE SAME TIME.

PARAMETER:

CONCENTRATION RANGE: 0 ~ 100,000 / CM3

GRAIN DIAMETER: 0.02 ~ 1.0^M

FLOW: SAMPLING FLOW: 100CM3 / MIN

TOTAL FLOW: 700CM3 / MIN

CLOSENESS COEFFICIENT TEST: DIRECT TEST (COUT/ CIN)

LIQUOR: 99.5% + ISOPROPANOL (ANALYTICAL GRADE)

DISPLAY: 7INCH TRUE COLOR TOUCH SCREEN

COMMUNICATION INTERFACE: USB X 3 (HOST X 2,DEVICE X 1) ETHERNET INTERFACE X1

CONNECTION PORT: ENVIRONMENT PORT, SAMPLING PORT

WIFI: EQUIPPED

LANGUAGES: ENGLISH, FRENCH, SPANISH, PORTUGUESE, CHINESE

FLOW CONTROL: SENSOR CONTROL

PC CONTROLLABLE OPERATION: ONE COMPUTER CAN CONTROL 4 INSTRUMENTS AT THE SAME TIME

DATA OUTPUT FORMAT: MICROSOFT EXCEL

WORKING TEMPERATURE: 15 ~ 35 °C

POWER SOURCE: AC 110 —240V 50 / 60HZ

APPEARANCE SIZE: 208 X 117 X 262MM

WEIGHT: 2.1KG

ACCESSORIES: ALCOHOL REAGENT BOTTLE, PROTECTIVE CAP, REAGENT STICK, ZERO-COUNT FILTER, STRAINER, SAMPLING TUBE, INSTRUCTION MANUAL, AC ADAPTER, TOUCH SCREEN PEN, OPTIONAL COMPUTER.

OPTIONAL: TEST KIT FOR TIGHTNESS COEFFICIENT

IN ORDER TO PREVENT INFECTION AT THE MEDICAL SITE AND DURING LABOR WORK, WORKERS MUST BE PROTECTED FROM INHALABLE HAZARDOUS SUBSTANCES IN THE WORKPLACE, AND RESPIRATORS SUCH AS MASKS MUST BE WORN DURING WORK.

SELECT A RESPIRATOR, SUCH AS A MASK, BASED ON YOUR FACIAL FEATURES, AND EVALUATE THE TIGHTNESS BETWEEN THE RESPIRATOR, SUCH AS A MASK AND THE FACE, TO CHECK WHETHER THERE ARE GAPS OR LEAKS THAT PUT WORKERS AT RISK. THE MASK TIGHTNESS TESTER CAN QUICKLY COMPLETE THE TIGHTNESS TEST OF RESPIRATORS SUCH AS MASKS TO ENSURE THAT IT PROVIDES GOOD PROTECTIVE PERFORMANCE. SECURITY EXPERTS WILL ALSO DEVELOP PROTECTION SCHEMES AND STANDARD REGULATIONS BASED ON THE RESULTS OF THE TIGHTNESS TEST. WIDELY USED IN HOSPITALS, MANUFACTURING PLANTS, PRODUCTION SITES, FIREFIGHTING WORKPLACES AND OTHER OFFICIAL TESTING AGENCIES.

MASK TIGHTNESS TESTER FEATURES:

• QUANTITATIVE TIGHTNESS TEST FOR RESPIRATORS SUCH AS MASKS (QNFT)

• APPLICABLE TO 100/99 / P3 / HEPA SERIES MASK DISPOSABLE FILTER MASK TIGHTNESS TEST (INCLUDING N95 / N90 / KN95 AND OTHER DISPOSABLE DUST MASKS)

• ADHESION TEST OF HALF MASK AND FULL FACE MASK

• GAS MASK TIGHTNESS TEST

• PAPR MASK TIGHTNESS TEST

• SCBA RESPIRATOR MASK TIGHTNESS TEST

• 7INCH TRUE COLOR TOUCH SCREEN

• INDEPENDENT OR COMPUTER CONTROLLED

• USING CNC TECHNOLOGY

• ENGLISH, FRENCH, SPANISH, PORTUGUESE, CHINESE LANGUAGE SWITCHING DISPLAY

• COMPLIES WITH US OSHA STANDARDS, CANADIAN STANDARDS ASSOCIATION (CSA) GUIDELINES, INCLUDING N95

• EQUIPPED WITH A VARIETY OF COMMUNICATION INTERFACES (USB, ETHERNET), AND CAN ALSO ENABLE WIFI

• ONE COMPUTER CAN CONTROL FOUR INSTRUMENTS AT THE SAME TIME

QUANTITY: 1

Learn More
C-4835 RICE CAKE MACHINES

Compare

C-4835 RICE CAKE MACHINES

OFFER 001
MODEL: 8501 (EASY CLEANING)
SIZE: 575(L) mm X 470(W) mm X 1,420(H) mm
WEIGHT: 165 KGS
ELECTRIC: 220V / 50 OR 60HZ (1 PHASE 3.5 KW MAX)
ELECTRIC CONSUMPTION: 2KW
WORKING CAPACITY: 1 PC EVERY 10 SEC
MATERIAL: 100% OF VARIOUS GRAINS
SIZE OF SNACK: D: 85 OR 90mm * T: 3 TO 10mm (3 TO 15mm OPTION)
CAPACITY: 360 PCS/HOUR
QUANTITY: 1

OFFER 002
MODEL: 10001
SIZE: 575(L) mm X 470(W) mm X 1,420(H) mm
WEIGHT: 165 KGS
ELECTRIC: 220V / 50 OR 60HZ (1 PHASE 3.5 KW MAX)
ELECTRIC CONSUMPTION: 2KW
WORKING CAPACITY: 1PC EVERY 10SEC
MATERIAL: 100% OF VARIOUS GRAINS
SIZE OF SNACK: D: 100mm * T: 3 TO 12mm (3 TO 15mm OPTION)
CAPACITY: 360 PCS/HOUR
QUANTITY: 1

OFFER 003
MODEL: 6502
SIZE: 575(L) mm X 470(W) mm X 1,420(H) mm
WEIGHT: 165 KGS
ELECTRIC: 220V / 50 OR 60HZ (1 PHASE 3.5 KW MAX)
ELECTRIC CONSUMPTION: 2KW
WORKING CAPACITY: 2PCS EVERY 10SEC
MATERIAL: 100% OF VARIOUS GRAINS
SIZE OF SNACK: D: 65mm * T: 3 TO 12mm (3 TO 15mm OPTION)
CAPACITY: 720 PCS/HOUR
QUANTITY: 1

OFFER 004
MODEL: 4506
SIZE: 575(L) mm X 470(W) mm X 1,420(H) mm
WEIGHT: 165 KGS
ELECTRIC: 220V / 50 OR 60HZ (1 PHASE 3.5 KW MAX)
ELECTRIC CONSUMPTION: 2KW
WORKING CAPACITY: 6PCS EVERY 10SEC
MATERIAL: 100% OF VARIOUS GRAINS
SIZE OF SNACK: D: 45mm * T: 3 TO 12mm
CAPACITY: 2,160 PCS/HOUR
QUANTITY: 1

OFFER 005
MODEL: 2515
SIZE: 575(L) mm X 470(W) mm X 1,420(H) mm
WEIGHT: 165 KGS
ELECTRIC: 220V / 50 OR 60HZ (1 PHASE 3.5 KW MAX)
ELECTRIC CONSUMPTION: 2KW
WORKING CAPACITY: 15PCS EVERY 10SEC
MATERIAL: 100% OF VARIOUS GRAINS
SIZE OF SNACK: D: 25mm * T: 3 TO 12mm
CAPACITY: 5,400PCS/HOUR
QUANTITY: 1

OFFER 006
MODEL: 8585(S1)
SIZE: 575(L) mm X 470(W) mm X 1,420(H) mm
WEIGHT: 165 KGS
ELECTRIC: 220V / 50 OR 60HZ (1 PHASE 3.5 KW MAX)
ELECTRIC CONSUMPTION: 2KW
WORKING CAPACITY: 1PC EVERY 10SEC
MATERIAL: 100% OF VARIOUS GRAINS
SIZE OF SNACK: D: 85 OR 90 OR 100mm (SQUARE) * T: 3 TO 12mm
CAPACITY: 360 PCS/HOUR
QUANTITY: 1

OFFER 007
MODEL: 50115(S1)
SIZE: 575(L) mm X 470(W) mm X 1,420(H) mm
WEIGHT: 165 KGS
ELECTRIC: 220V / 50 OR 60HZ (1 PHASE 3.5 KW MAX)
ELECTRIC CONSUMPTION: 2KW
WORKING CAPACITY: 1PC EVERY 10SEC
MATERIAL: 100% OF VARIOUS GRAINS
SIZE OF SNACK: D: 50*115mm (RECTANGLE) * T: 3 TO 12mm
CAPACITY: 360 PCS/HOUR
QUANTITY: 1

OFFER 008
MODEL: 6060(S2)
SIZE: 575(L) mm X 470(W) mm X 1,420(H) mm
WEIGHT: 165 KGS
ELECTRIC: 220V / 50 OR 60HZ (1 PHASE 3.5 KW MAX)
ELECTRIC CONSUMPTION: 2KW
WORKING CAPACITY: 2PCS EVERY 10SEC
MATERIAL: 100% OF VARIOUS GRAINS
SIZE OF SNACK: D: 60*60mm (SQUARE) * T: 3 TO 12mm
CAPACITY: 720 PCS/HOUR
QUANTITY: 1

OFFER 009
MODEL: 4570(S3)
SIZE: 575(L) mm X 470(W) mm X 1,420(H) mm
WEIGHT: 165 KGS
ELECTRIC: 220V / 50 OR 60HZ (1 PHASE 3.5 KW MAX)
ELECTRIC CONSUMPTION: 2KW
WORKING CAPACITY: 3PCS EVERY 10SEC
MATERIAL: 100% OF VARIOUS GRAINS
SIZE OF SNACK: D: 45*70mm (RECTANGLE) * T: 3 TO 12mm
CAPACITY: 1,080 PCS/HOUR
QUANTITY: 1

OFFER 010
MODEL: 2575(S5)
SIZE: 575(L) mm X 470(W) mm X 1,420(H) mm
WEIGHT: 165 KGS
ELECTRIC: 220V / 50 OR 60HZ (1 PHASE 3.5 KW MAX)
ELECTRIC CONSUMPTION: 2KW
WORKING CAPACITY: 5PCS EVERY 10SEC
MATERIAL: 100% OF VARIOUS GRAINS
SIZE OF SNACK: D: 25*75mm (RECTANGLE) * T: 3 TO 12mm
CAPACITY: 1,800 PCS/HOUR
QUANTITY: 1

OFFER 011
MODEL: 4509 (PLC CONTROL)
SIZE: 1,150(L) mm X 460(W) mm X 1,400(H) mm
WEIGHT: 420 KGS
ELECTRIC: 220 TO 380V / 50 OR 60HZ (3 PHASE 6 KW MAX)
HEATER TEMPERATURE: MAX: 400 ℃: MIN: -10 ℃
WORKING CAPACITY: 9PCS EVERY 10SEC
MATERIAL: 100% OF VARIOUS GRAINS
SIZE OF SNACK: D: 45mm* T: 10mm
CAPACITY: 3,240 TO 4,500 PCS/HOUR
QUANTITY: 1

OFFER 012
MODEL: 50115 (S3) (PLC CONTROL)
SIZE: 1,150(L) mm X 460(W) mm X 1,400(H) mm
WEIGHT: 420 KGS
ELECTRIC: 220 TO 380V / 50 OR 60HZ (3 PHASE 6 KW MAX)
HEATER TEMPERATURE: MAX: 400 ℃: MIN: -10 ℃
WORKING CAPACITY: 3 PCS EVERY 10SEC
MATERIAL: 100% OF VARIOUS GRAINS
SIZE OF SNACK: D: 50*115mm (RECTANGLE) * T: 10mm
CAPACITY: 1,080 PCS/HOUR
QUANTITY: 1

OFFER 013
MODEL: 6060(S6) (PLC CONTROL)
SIZE: 1,150(L) mm X 460(W) mm X 1,400(H) mm
WEIGHT: 420 KGS
ELECTRIC: 220 TO 380V / 50 OR 60HZ (3 PHASE 6 KW MAX)
HEATER TEMPERATURE: MAX: 400 ℃: MIN: -10 ℃
WORKING CAPACITY: 6PCS EVERY 10SEC
MATERIAL: 100% OF VARIOUS GRAINS
SIZE OF SNACK: D: 60*60mm (SQUARE) * T: 10mm
CAPACITY: 2,160 PCS/HOUR
QUANTITY: 1

Learn More
M-0461 COMPLETE COMBED COTTON RING SPINNING MILL -10,560 SPINDLES -YEAR 1993

Compare

REFERENCE NUMBER: M-0461 COMPLETE COMBED COTTON RING SPINNING MILL -10,560 SPINDLES -YEAR 1993 QUANTITY AVIAILABLE: 1 Learn More
K-3351 CHICKEN SLAUGHTERING LINE – 1000 TO 1500 BIRDS PER HOUR

Compare

REFERENCE NUMBER: K-3351 CHICKEN SLAUGHTERING LINE – 1000 TO 1500 BIRDS PER HOUR QUANTITY AVAILABLE: 1 Learn More
G-4425 CHICKEN SLAUGHTER LINE 1500 PER HOUR

Compare

REFERENCE NUMBER: G-4425 CHICKEN SLAUGHTER LINE 1500 PER HOUR QUANTITY AVAILABLE: 1 Learn More
TT-1043 UNIVERSAL TESTING MACHINE FOR TENSILE TEST, 30KN

Compare

TT-1043 UNIVERSAL TESTING MACHINE FOR TENSILE TEST, 30KN KEY SPECIFICATIONS: MAX. CAPACITY: 10N, 20N, 50N, 100N, 200N, 500N, 1KN, 2KN, 5KN, 10KN, 20KN, 30KN DISPLAY: COMPUTER DISPLAY MODE FORCE RESOLUTION: 1/100,000 FORCE ACCURACY: ≤+/-0.5% STROKE RESOLUTIO: 0.5mm TEST SPEED: 0.001-500mm/MIN, CAN SET BY COMPUTER, WITH UP & DOWN FAST ADJUSTMENT BUTTON OF GRIPS WALKING SPACE: 1000mm (IT CAN BE CUSTOM-TAILOR ACCORDING TO THEIR REQUIREMENTS) FORCE UNIT SWITCH: KGF, N, IBF, G, TON, MPA STOP MODE: OVERLOAD STOP, EMERGENCY STOP BUTTON, SPECIMEN DAMAGE AUTOMATIC STOP, UPPER & LOWER LIMIT SET AUTOMATIC STOP, AUTOMATIC RESET FUNCTION MACHINE DRIVE: SERVO MOTOR DRIVE, SYNCHRONOUS WHEEL AND PRECISION BALL SCREW DRIVE POWER: 400W DIMENSIONS: 720 X 620 X 1400mm (W X D X H) WEIGHT: 150KG POWER SUPPLY: 220V 50/60Hz 10A STANDARDS: BS EN ISO 13934-1, 13934-2, 13937-2, 13937-3, 13937-4, 13935-1, 13935-2, BS 3320, 4303. ASTM D 434, 558, 2256, 2261, 2731, 3936, 4533, 4964, 5034, 5035, 5735. ISO 2062, 5082, 9073.4, 10321, 13919. ASTM882, ASTM638 STANDARD ACCESSORIES: ENGLISH OPERATION SOFTWARE 1PC CABLE CONNECT WITH PC 1PC LOAD CELL 1PC OPTION ACCESSORIES: DESKTOP COMPUTER 1PC QUANTITY: 1 Learn More
TT-3702 WORSTED SPINNING PLANT OF 4992 SPINDLES, YEAR 1987 TO 2022

Compare

TT-3702 WORSTED SPINNING PLANT OF 4992 SPINDLES, YEAR 1987 TO 2022 WORKING CONDITION CONTAINER: 26/30 (DEPENDING FROM ACCESSORIES) Learn More
YY-2251 AIRLAID PRODUCTION LINE, FINAL PRODUCT WIDTH 2200mm

Compare

YY-2251 AIRLAID PRODUCTION LINE, FINAL PRODUCT WIDTH 2200mm ITEM 001 BALE OPENER (2 SETS) AND SEALED BALE OPENER (1 SET) ITEM 002 FIBER OPENING MACHINE (FOR LOW MELT FIBER OR PP) - 1 SET ITEM 003 PRE-OPENER – 1 SET ITEM 004 BIG CHAMBER BLENDER – 1 SET ITEM 005 MAIN-OPENER – 1 SET ITEM 006 VIBRATING FEEDER – 1 SET ITEM 007 CONDENSER – 2 SETS ITEM 008 AUTO-LEVER - 1 SET ITEM 009 AIR LAID MACHINE – 1 SET ITEM 010 AUTO-LEVER – 1 SET ITEM 011 BATT FEEDER – 1 SET ITEM 012 HIGH SPEED SINGLE SHAFT SINGLE BOARD PRE NEEDLE LOOM – 1 SET ITEM 013 HIGH SPEED SINGLE SHAFT SINGLE BOARD MAIN NEEDLE LOOM – 1 SET ITEM 014 DOUBLE BELT THERMAL-BONDED OVEN – 1 SET ITEM 015 DOUBLE-ROLLER CALENDER MACHINE – 1 SET ITEM 016 COOLING UNIT – 1 SET Learn More