Search results for: 'Winder machine se'

REFERENCE NUMBER: C-1222 SAVIO AUTOMATIC CONE WINDER, MODEL ORION E, YEAR 2005, WITH WAXING DEVICE, N.44 POSITIONS – YEAR 2005 DETAILS: AUTOMATIC CONE WINDER SAVIO ORION E N.44 HEADS YEAR OF CONSTRUCTION 2005 AUTOMATIC LOADER OF THE SPOOLS AUTOMATIC TOP SEARCH MAIN UNIT SX LOADED DX DELIVERY 6"(152 mm) CONICITY 4°20' 2 TURNS DRUM DIAMETER 94 mm VARIABLE STEP SPLICER MESDAN MOD.690 U ELECTRONIC CLEARERS LOEPFE ZENIT FC WITH INTERCEPTING FOREIGN FIBERS WAXING DEVICE N.1 TROLLEY FOR AUTOMATIC DOFFING N.1 CONES RESERVE SINGLE BASKET LIGHTING ON THE MACHINE TROLLEY BLOWER MAGITEX WITH DRAIN ON THE MAIN UNIT QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: M-3973 (99016AVEZ8RX)-D HOTMELT POWDER SCATTERING AND LAMINATING MACHINE-2200mm 1.LAMINATING LINE : MAKE : VILLARS (CH) ACTUALLY SANTEX YEAR: 1993 WORKING WIDTH : 2200mm (NOMINAL WIDTH 2M10) VOLTAGE: 3X380(400)V TOTAL POWER : 158KW RECOMMENDED MAX. SPEED 10M BUT 15M IS POSSIBLE ORIGINAL CONFIGURATION : INPUT UNIT (WITH POSSIBILITY TO HANG IN ROLLERS BY MEANS OF E.G. FLAT BEARINGS), POWDER SPREADER, INFRARED PREHEATING ZONE AND DOUBLE BAND LAMINATING PRESS (HEATING THROUGH IR) LATER EXTENSION (1997) : 2ND INFRARED ZONE WITH COLD WATER COOLED CALENDAR AT THE BACK EQUIPPED WITH SELVEDGE CUTTING SYSTEM WITH ADJUSTABLE INFRARED FOLLOW UP SYSTEM. STRENGTH OF INFRARED CAN BE ADJUSTED SO THAT E.G. THE UPPER SUBSTRATE CAN BE ‘NEGLECTED’. KNOWN PROBLEMS : 1)INFRARED PREHEATING ZONE : 2 IR STRIPS BROKEN 2)CERTAIN PARTS IR ZONES (MOSTLY EXTERIOR ZONES) OF THE DOUBLE BAND LAMINATING PRESS DO NOT LONGER FUNCTION, BUT SECOND PART OF THE MACHINE CAN STILL BE HEATED TILL 160 À 170°C AND EVEN MORE, BUT THEN AT VERY LOW SPEED 2.ACCUMULATOR WITH WINDER AND CONTROLLING SYSTEM : MAKE : MATTHIJS (ELECTRICAL PART BY ELECTRO VANDEVELDE) YEAR: 1999 OPERATING VOLTAGE : 3X380V CAPACITY ACCUMULATOR : +/- 50M UNIT FUNCTIONS INDEPENDENTLY FROM LAMINATING MACHINE AND SPEED VARIES FROM 0 TILL 50M (SPEED OF WINDING UP UNIT = SPEED LAMINATING MACHINE WHEN ACCUMULATOR IS EMPTY) 3. SUPERSTRUCTURE FOR SUPPLY SECOND SUBSTRATE : MAKE: MENZEL YEAR: 2000 OPERATING VOLTAGE : 3X380V FUNCTIONS INDEPENDENTLY FROM THE LAMINATING MACHINE. SPEED REGULATION BASED ON A 0-10V (=0-15M) EXIT SIGNAL OF THE LAMINATING MACHINE MANUAL RIGHT-LEFT GUIDANCE OF THE SUBSTRATE. A SECOND AUTOMATIC PRE-GUIDANCE IS FORESEEN, BUT THE MOTOR DOES NO LONGER FUNCTION AND IT IS IN PRACTICE NOT REQUIRED BECAUSE THE ROLLS ARE ALWAYS WINDED STRAIGHT. A MEASURING ROLLER IS INCLUDED TO MEASURE THE TENSION OF THE SUBSTRATE. THIS MEASURING ROLLER DIRECTS THE MOTOR SPEED SO THAT THE ADJUSTING OF THE TENSION STAYS STEADY. IT IS EVEN POSSIBLE TO GO TO A +/- TENSIONLESS SITUATION. THE LINE IS MOUNTED ON A SELF-MADE PLATFORM EQUIPPED WITH A SIMPLE UNWINDING UNIT KNOWN PROBLEM : PRESSURE ROLLER TO AVOID THAT THE SUBSTRATE “SLIDES” OVER THE BRAKE ROLLER IS WORN OUT, BUT IS IN PRAXIS NOT NEEDED. MOTOR OF THE PRE-GUIDANCE IS BROKEN (SEE ABOVE) 4.MISCELLANEOUS : SELF-BUILD ENTRY J-BOX WITH SIMPLE ROLL MEASUREMENT SEPARATE J-BOX FOR UNWINDING FROM DOCKS, SO THAT CAN BE LAMINATED IN THE POLE DIRECTION SEWING MACHINE MERROW TO MAKE FLAT SEAMS ON FINE/THIN FABRICS SELVEDGE CUTTERS ARE MOUNTED ON A SYSTEM SO THAT THE FABRIC CAN BE LEVELLED EASILY, EVENTUALLY CAN BE WINDED ON DOCKS. INCLUDING 2 DOCKS OF 2M30 OF WHICH 1 WITH FLAP BEARINGS Learn More

TT-7614 COMPLETE NONWOVEN NEEDLEPUNCH LINE, WIDTH 2400mm, YEAR 2017 1) COMPLETE NONWOVEN NEEDLEPUNCH LINE 2) YEAR 2017 3) CONDITION: USED 4) WORKING WIDTH 2400mm QUANTITY: 1 Learn More

T-8968 BATTENFELD BLOWN FILM MACHINE EXTRUDER DIAMETER 4.5” (115mm), OUTPUT MAX 180KG/H (400 LBS/H), YEAR 2008 YEAR 2008, PILOT RUN YEAR 2009, STOPPED PRODUCTION YEAR 2017 FILM MACHINE EXTRUDER: BATTENFELD EXTRUDER DIAMETER 4.5” (115mm) L/D RATIO 24:1 460V 3P 60Hz 125HP AC VECTOR MOTOR RESIN TEMPARETURE: 230°C (446 DEGREEF) OUTPUT: MAX 180KG/H (400 LBS/H) PRESSURE RATINGS ARE: BARREL 20,000PSI BARREL CLAMP 10,000PSI RUPTURED DISC 7,500PSI Learn More

REFERENCE NUMBER: A-1876
END OF LINE UNIT T4.0 FOR NEEDLEPUNCHED PRODUCTS – 4000mm

PRODUCT TO BE PROCESSED: NEEDLEPUNCHED NONWOVENS
PRODUCT WIDTH: 4.000 MM

WORKING SPEED: 1 – 20 M/MIN

QUANTITY: 1

Learn More

REFERENCE NUMBER: C-1137 WORSTED WOOL RING SPINNING PLANT, YEAR 1988 TO 1991, WITH 8968 SPINDLES SPECIFICATIONS: WORSTED(WOOL) RING SPINNING PLANT COMPLETE(TOTAL 8,968 SPINDES) OF NM20 ~ NM120 100% PURE WOOL PRODUCTION LINES RECOMBING SECTION : 2 BLENDING GILL MACHINES(COGNETEX/TEMATEX)) 2 PREGILL MACHINES(COGNETEX/TEMATEX) 14 RECOMBING MACHINES(4 SETS NSC PB31,4 SETS SANT'ANDREA P90,6 SETS SANT'ANDREA PSE10) 2 FIRST GILL MACHINES(COGNETEX/TEMATEX) 2 SECOND GILL MACHINES(COGNETEX/TEMATEX) ----------------------------------------------------------------------------------------- PREPARATION TO SPINNING SECTION : 2 AUTOLEVELLER GILL MACHINES(COGNETEX/TEMATEX) 2 HIGH SPEED GILL MACHINES(COGNETEX/TEMATEX) 2 BICOILER GILL MACHINES(COGNETEX/TEMATEX) 2 BOBBINER MACHINES(COGNETEX SFC,22 SPINDLES) ----------------------------------------------------------------------------------------- SPINNING SECTION : 6 TOYODA RXW RING SPINNING FRAMES(624 SPINDLES,45MM RING DIA.75MM GAUGE,YEAR 2000 3 SETS,YEAR 2003 3 SETS) 6 COGNETEX RING SPINNING FRAMES(448 SPINDLES,FTC7L,48MM RING DIA.YEAR 1991) 6 COGENTEX RING SPINNING FRAMES(416 SPINDLES,FTC8L,55MM RING DIA.YEAR 1988) ----------------------------------------------------------------------------------------- WINDING AND TWISTING SECTIONS : 4 AUTOMATIC WINDERS(SAVIO,RAS-15,1 SET 64 SPINDLES,3 SETS 56 SPINDLES) 2 DOUBLING MACHINES(FADIS,42 SPINDLES,YEAR 1995) 10 TWO FOR ONE TWISTING MACHINES(MURATA,363,120 SPINDLES,YEAR 1989) 2 TWO FOR ONE TWISTING MACHINES(LEEHWA,120 SPINDLES,YEAR 2003) 2 STEAM SETTING MACHINES(ASHIDA) ----------------------------------------------------------------------------------------- PREPARATION TO SPINNING SECTION : 1 NSC BLENDING GILL MACHINE(GN6,1991) 1 NSC GILL MACHINE(GN6,1991) 1 NSC GILL MACHINE(GN6,1991) 1 NSC GILL MACHINE(GN6,1991) 1 NSC REDUCER MACHINE(FM5P,8 SPINDLES,YEAR 1991) 1 NSC BOBBINER MACHINE(FM7A,20 SPINDLES,YEAR 1991) QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: M-4038

BENNINGER ZELL MERCERIZER YEAR 2007 WIDTH 1800mm

 

BRAND: BENNINGER ZELL

MODEL YEAR: 2007

ROLLER WIDTH: 2000mm

WORKING WIDTH: 1800mm

TOTAL FABRIC QUANTITY: 160 METERS

SEARCH FOR PRE-WETTING AND IS LOCATED AT THE ENTRANCE TIGHTENING.

MERCERIZED PART: TWO-CHAN, ARE TIGHTENING INTERMEDIATE OUTPUT.

BENNINGER HAS BOMA CONTROL SYSTEM

STABILIZE KISMI : A CHAN , OUTPUT ARE TIGHTENING SEARCH

ELUTING FRACTION CAN OPERATE INDEPENDENTLY

THE MACHINE ONLY FOR THE PURPOSE OF DESTROYING THE AVAILABLE

ELECTRICAL PANEL HAS BEEN DESIGNED ACCORDINGLY BY BENNINGER

WASHING BOATS: FOUR PIECE, BENNINGER WASHING TECHNIQUES APPROPRIATE TO EACH, DOUBLE FABRIC PASS, SEARCH TOP SQUEEZE, INDIRECTLY HEATED, DIRECT WATER SUPPLY AND CHEMICALS SHOULD BE FED TWO BOAT.

EVERY BOAT OUT THERE IN THE FABRIC OPENING AND INTERMEDIATE CLAMPING UNITS HAVE.

THE LAST BOAT IS IN ITSELF CONSISTS OF TWO PARTS, THE BATHROOMS DO NOT MIX.

THE NEUTRALIZATION CAN BE PERFORMED IN THE LAST COMPARTMENT.

THERE ARE AUTOMATIC ACID DOSAGE UNIT.

THERE ARE 7.5 KN CLAMPING CYLINDER IN THE OUTPUT SECTION.

SEARCH SQUEEZED FABRIC FROM THE FABRIC CENTERING.

THROUGH THE WINDER UNIT IS WRAPPED IN THE DOCK

Learn More

YY-2409 SLOT DIE COATING MACHINE, MAXIMUM COATING WIDTH 1550mm (61 INCHES) APPLICATION: 1. HOT MELT SENSITIVE PRESSURE ADHESIVE COATING AND LAMINATION LINE, FOR COATING, LAMINATION, PEELING, REWINDING FUNCTION. 2. APPLICATION MATERIAL: PET, PVC, PAPER ETC. MACHINE FEATURES: 1. THIS MACHINE INCLUDES MICROCOMPUTER PLC, TOUCH SCREEN CONTROL, SIMPLE OPERATION AND HIGH AUTOMATION; 2. USING HIGH WEAR-RESISTANT ALLOY STEEL SLOT DIE, WITH COATING CONTROL ACCURACY AND GOOD SERVICE LIFE; 3. AN OVERALL COATING ADJUSTMENT BRACKET IS INCLUDED, AND THE REPEAT POSITIONING ACCURACY IS PRECISE; 4. AUTOMATICALLY TRACKS AND DISPLAYS AND STORES THE AMOUNT OF GLUE NEEDED, MAKING THE OPERATION AND USE CONVENIENT AND FAST; 5. THE FIRST UNWINDING IS EQUIPPED WITH A WEB GUIDING DEVICE, WITH A HIGH-PERFORMANCE INFRARED SENSOR AND ELECTRIC CONTROLLER TO ENSURE THE EVEN LET OFF OF THE MATERIAL ROLL; 6. THE HEATING TEMPERATURE IS ALL CENTRALLY CONTROLLED BY PLC; 7. THE AMOUNT OF GLUE SUPPLIED BY THE METERING PUMP FOR THE COATING WIDTH IS INPUT BY THE WORKER, AND THE AMOUNT OF GLUE SUPPLIED WILL BE AUTOMATICALLY CALCULATED AND SUPPLIED TO THE DIE SLOT. QUANTITY: 1 Learn More

REFERENCE NUMBER: L-6890 TEXPA HEMMING AND LABEL SEWING MACHINES, MODEL QRSN RUNNING TERRY ITEM 001 TEXPA LONGITUDINAL HEMMING MACHINE YEAR 2005 QUANTITY: 1 ITEM 002 TEXPA CROSS HEMMING AND LABEL SEWING MACHINE YEAR: 2005 MODEL: QRSN POSSIBILE TO SEW THREE TYPES OF LABELS: U, V, FLAG PFAFF SEWING MACHINES EQUIPPED FOR TERRY TOWEL WORKING WIDTH: 300mm TO 2000mm QUANTITY: 1 STATUS: STOPPED, NOT DISMANTLED DELIVERY: DISMANTLING AND LOADING WILL NEED 3 WEEKS, REQUIRES TWO 40 FT CONTAINERS TO SHIP Learn More

REFERENCE NUMBER: R-7584

CORGHI DOUBLING WINDER, YEAR 2008 MODEL BE TRAVERSE 6 TO 8 INCHES

 

QUANTITY: 1

Learn More