Search results for: 'Panel+c''

REFERENCE NUMBER: M-4191 (1010PLOKXX9) K FEMCO SKYVER MODEL FEMCO A-14 ( 1 ) FEMCO SKYVER MODEL: FEMCO A-14 MFG BY: FERRY INDUSTRIES, INC ROLLER WIDTH 68 INCHES DIAMETER OF ROLLER 3.5 INCHES DIMENSION OF TABLE: WIDTH: 68" INCHES LENGTH: 125" INCHES INCLUDING CONTROL PANEL COMPLETE AND IN RUNNING CONDITION , STILL INSTALLED ON THE PLANT FLOOR QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: M-1795 (77057BHB6R) SANTEX SANTASHRINK YEAR 1997 WIDTH 1800mm SANTEX SANTASHRINK YEAR 1997 WIDTH 1800mm CONSISTING OF: ENTRY UNIT DRY CHAMBERS VIBRATION AND DAMPER UNIT EXIT UNIT ALL MOTORS ELECTRIC PANELS EXHAUSTER MOISTURE MEASURE UNIT ENERGY SAFE UNIT CONTROL COMMANDER SANTAMATIC 2000 QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: K-8462 SANTEX SANTASHRINK 180 YEAR 1997 WIDTH 1800mm SIEVE DRUM DRYER WORKING WIDTH: 1800mM YEAR: 1997 THE DRYING LINE IS CONSISTING OF: -INFEED -DRYING CHAMBERS -VIBRATION AND STEAMING UNIT -EXIT -DRIVE SYSTEM -EXHAUST AIR SYSTEM -MEASURING UNIT TO MEASURE MOISTURE -CONTRO PANEL THE MACHINE IS PREVIOUSLY USED FOR DRYING POLYAMID TUBULAR MATERIAL WITH CONTROL UNIT SANTAMATIC 2000 3x400V+N+E 230V 50HZ CONNECTED LOAD 64 KW QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: A-1115 BRAZZOLI H.T. DYEING MACHINES TERRY TOWEL YEAR 2002 Brazzoli H.T. Dyeing machines, for terry towel fabrics. Type Saturno Luft HTF. Year 2002 Capacity 400kg each machine, these machines can also be operated coupled to dye one lot of 800kg. Supplied with main motor and pump, automatic valves for steam and water functions. Add tank + dosing pump. Electrical panel with Microprocessor controls. QUANTITY AVAILABLE: 2 Learn More

REFERENCE NUMBER: M-4177 (1010PAIMXX9) L DORNIER HTV 4/SD WEAVING LOOMS YEAR 1990 WIDTH 2800mm DORNIER WEAVING LOOMS TYPE HTV 4/SD YEAR 1990 WIDTH 2800mm STAUBLI DOBBY TYPE 2237 RS 20 SHAFTS 4 COLORS – 4 ECS AT 1 CONTROL PANEL WITH ELECTRONIC LET-OFF AND MECHANICAL TAKE-UP PREPARED FOR CLOTH ROLLER QUANTITY AVAILABLE: 5 Learn More

REFERENCE NUMBER: M-3015

MECA/TARGET TA90 COMPUTERIZED QUILTING MACHINE-90”-YEAR 1999

 

MECA-TARGET COMPUTERIZED QUILTING MACHINE

MODEL TA90

WITH MECA MODEL TGLUNI PANEL CUTTER

TYPE/MODEL: TA90

YEAR: 1999

WITH (3) BARS: 10mm×60mm×135mm

MACHINE WORKING WIDTH: 90”(2286mm)

WITH (1) COMPUTER

MACHINE TOTAL WEIGHT: 4000KG

ELECTRICAL FEATURES: V500 HZ60 PHASE3 KW10

PNEUMATIC FEATURES: 6 BARS

CONSUMPTION: 320 1/H

WITH (1) FOAM CREEL WHICH HAS (2) THREAD RACKS (ONE AT THE TOP AND THE OTHER AT THE BOTTOM)

(1) CATWALK

(1) CLOTH TRAY

(45) LOOPERS

 

QUANTITY: 1

Learn More

(1) EMCO QUILTER 2 BARS WIDTH: 88” INCHES BOBBIN # 10 WITH 7 CIRCULAR BLADES IN THE BACK FOR BORDER CUTTING COMPUTER DRIVEN CLOTH TRAY CAT WALK OVERHEAD THREAD RACK PLATE INFORMATION (FOR THE QUILTER) MODEL: 88•1•3•4 PLATE INFORMATION (FOR THE CONTROL PANEL) MODEL: 88•1•3•4 THE COMPUTER INCLUDES 2 DRIVES DRIVES INFORMATION FOR COMPUTER A B AMP. MODEL: MPA-25 MPA-10 SERIAL NUMBERS: 36418 36324 D/C: 130120 130104 PHASE: SINGLE/3 SINGLE INPUT VOLTAGE: 80-260VAC 80-260VAC INPUT FREQUENCY: 45-65Hz 45-65Hz INPUT CURRENT: 30/18A 12A OUTPUT CURRENT: 25/50A 10/20A PWM FREQUENCY: 15KHZ 18KHZ TERMINAL TORQUE: 7 INCHES 7 INCHES AMP. TEMP RANGE: 0-45C° 0-45C° Learn More

MACHINE SIZE: 90 INCH MODEL: ULTRA 12X12 NO PANEL CUTTER CONTROLLER: GRIBETZ INT. MSC 850 MULTI-AXIS SERVO CONTROLLER NEEDLE SPACING: 1X3X6 INCLUDES FABRIC & FOAM FEED, THREAD RACKS, AND QUILTED FABRIC REROLLER EXCELLENT RUNNING CONDITION Learn More

REFERENCE NUMBER: M-4749 (1111ASRPXX10) L RECYCLING PLANT FOR FABRIC CUTTING (1) X MONDEJAR CUTTING MACHINE MODEL CUTTEX 1000, YEAR 1992 (1) X CHUTE FEED FOR ACCUMULATION MATERIAL WITH VENTILATOR (1) X ROLANDO BIELLA ITALY TEARING MACHINE YEAR 1973, NR.6 DRUMS (PLUS 1 SPARE) WORKING WIDTH 1000mm AND ELECTRICAL PANEL COMPLETE WITH 1 ENZIMAGE (1) LLORPIC AUTOMATIC VERTICAL PRESS MODEL ALCOY, YEAR 1994 WITH CHUTE FEED FOR ACCUMULATION MATERIAL VENTILATOR AND ELECTRICAL BOX (4) X BONINO CARDS MODEL CC150/170 YEAR 1992, WITH BRIEST AND FIX FLATS BONINO CHUTE FEED (LIKE FBK533) EXIT CAN 40” X 48” WITH AUTOMATIC CHANGER QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: M-4136 SANTEX TENTER FRAME YEAR 2003-UP TO 3400mm – 3 ZONE – VERTICAL PIN – HOT OIL TYPE: SANTEX TENTER FRAME YEAR: 2003 WORKING WIDTH: 800mm UP TO 3400mm SPEED: 2 UP TO 20 M/MIN CHAIN: VERTICAL PIN CHAIN DRYER: 3 COMPARTMENTS DRYER LENGTH: 6 METERS MAX. TEMP.: 230° C HEATING: DIATHERMIC OIL OIL BOILER: GARIONI NAVAL TH 500 CAPACITY: 581 KW, MAX. TEMP. 350° C, NITROGEN COVERED TOTAL LENGTH NEEDED: APPROX. 20,000mm TOTAL WIDTH OF MACHINE: 6,200mm TOTAL HEIGHT OF MACHINE: 3,100mm ENTRY COMBINATION GUIDING CHAIN FOR A-FRAMES CORRECT POSITIONING RUBBERIZED ROLLERS AS INFEED UNIT WECO IMPREGNATION UNIT, CONTROL AND TANK ROLLER WITH LOAD CELL MAHLO WEFT STRAIGHTENER, TYPE: RFMC-10A 6 MEASURING HEADS, WW 4200mm OPERATION PEDESTAL OPERATION PANEL, MONITOR 1 UPPER INFEED ROLLER + 1 BENDED ROLLER E+L FABRIC INFEED VERTICAL PIN CHAIN 3 SECTIONAL DRYER (6 M) COOLING UNIT AT EXIT 2 CAMERAS VIDEO CONTROL STRETCH WORK: 2 PRESSING ROLLERS 3 HEATED DRAG ROLLERS WITH SINGLE DRIVE TEMPERATURE 80° C TO 250° C ON-WINDING UNIT FOR A-FRAMES ELECTRICAL CABINET QUANTITY AVAILABLE: 1 Learn More