Search results for: 'roll pa'

C-4363 SEMI-AUTOMATIC CAN WET WIPES MACHINE Y-150, WIDTH 2000mm

Y-150 SEMI-AUTOMATIC CAN WET WIPES MACHINE
MAIN TECHNICAL PARAMETER: (SUITABLE FOR CANISTER WET TISSUE)
REWINDING SPEED: 80M/MIN
SUITABLE RAW MATERIAL: AIR LAID PAPER, SPUNLACE, NONWOVEN
WEIGHT OF MATERIAL: 30 TO 60 G/M2
POWER SUPPLY: 380V 50HZ
POWER: 3KW
MAXIMUM SIZE OF RAW MATERIAL: 1000 X 1500 (mm, ΦX W))
MAXIMUM SIZE OF WET TISSUE ROLL: 120 X WIDTH (mm, ΦX W)
(WIDTH CAN BE ADJUSTABLE)
MAXI WIDTH AND MAXI LINES: 15 × 100 (mm, LANES × W)
MAX FOLD ON SLITTING: 7 × 200 (MM, LANES × W)
HOLE PUNCHING LENGTH: 100 TO 300mm
FOLDING WAY: “C”SHAPE
WETTING SYSTEM WITH AUTO RECYCLING LIQUID
MACHINE SIZE: 2700 × 2000 × 1300 (mm, L×W×H)
WEIGHT OF MACHINE: 1000 KG
AUTOMATIC PNEUMATIC FEEDING MATERIAL SYSTEM

QUANTITY: 1

Learn More

C-4362 BABY WIPES FOLDING MACHINE Y-6, CAPACITY 40 TO 120 PCS/PACK (NON POP UP), WIDTH 3000mm

Y-6 BABY WIPES FOLDING MACHINE
PRODUCTION FLOW: UNROLLING - SLITTING FABRIC INTO LANES - FOLDING - WETTING - CUTTING – PILE & COUNTING - DELIVERING
MAIN TECHNICAL PARAMETER (SUITABLE TO WET TISSUE FOR LARGE SIZE PACKING)
PRODUCT TYPE: BABY WIPES (NON CROSS FOLDING)
PRODUCT SPEED: 200 TO 270 CUTS/MIN (SET ON PLC)
SUITABLE RAW MATERIAL: AIR LAID PAPER, SPUNLACE/HOT-ROLLING NONWOVEN FABRIC
WEIGHT OF RAW MATERIAL: 40 TO 80G/㎡
FOLDING WAY: “Z” SHAPE (NON-POP UP)
LENGTH OF WET TISSUE: 140 TO 185mm (SET ON PLC)
FREQUENCY OF RECEIVING PAPER: 14 TO 20 TIMES/MIN (SET ON PLC)
POWER SUPPLY: 380V 50HZ
POWER: 4KW
SIZE OF RAW MATERIAL: (1000 TO 1250) × Ø1000 (mm, W×DIA)
WET TISSUE UNFOLDED SIZE: (140 TO 185) × (150 TO 200) (mm, L×W)
WET TISSUE FOLDED SIZE: (140 TO 185) × (80 TO 110) (mm, L×W)
MATERIAL SUPPLY SYSTEM: SERVO MOTOR
CUTTING SYSTEM: CONVERTER MOTOR
PILING SYSTEM: SERVO MOTOR
POWER SUPPLY: 380V 50HZ
POWER: 6KW
SIZE OF MACHINE: 5200 × 3000 × 1800 (mm, L×W×H)
WEIGHT OF MACHINE: 1500 KG
OPTIONAL MAKING: Y-360 FULL AUTOMATIC RECIPROCATING TYPE PACKING MACHINE

QUANTITY: 1

Learn More

C-4361 BABY WIPES FOLDING MACHINE Y-6, CAPACITY 40 TO 120 PCS/PACK (POP UP & NON POP UP), WIDTH 3000mm

Y-6 BABY WIPES FOLDING MACHINE
(POSSIBLE TO ADD ONE MORE RAW MATERIAL SHELF TO BE Y-12)
PS: Y-12 IS ADD ANOTHER RAW MATERIAL SHELF ON THE BASE OF Y-6
PRODUCTION FLOW: UNROLLING - SLITTING FABRIC INTO LANES - FOLDING - WETTING - CUTTING – PILE & COUNTING - DELIVERING
MAIN TECHNICAL PARAMETER (SUITABLE TO WET TISSUE FOR LARGE SIZE PACKING)
PRODUCT TYPE: BABY WIPES (NON CROSS FOLDING)
PRODUCT SPEED: 200 TO 270 CUTS/MIN (SET ON PLC)
SUITABLE RAW MATERIAL: AIR LAID PAPER, SPUNLACE/HOT-ROLLING NONWOVEN FABRIC
WEIGHT OF RAW MATERIAL: 40 TO 80 G/㎡
FOLDING WAY: “Z” SHAPE (NON-POP UP AND POP UP)
LENGTH OF WET TISSUE: 140 TO 185mm (SET ON PLC)
FREQUENCY OF RECEIVING PAPER: 14 TO 20 TIMES/MIN (SET ON PLC)
POWER SUPPLY: 380V 50HZ
POWER: 4KW
SIZE OF RAW MATERIAL: (1000 TO 1250) × Ø1000 (mm, W×DIA)
WET TISSUE UNFOLDED SIZE: (140 TO 185) × (150 TO 200) (mm, L×W)
WET TISSUE FOLDED SIZE: (140 TO 185) × (80 TO 110) (mm, L×W)
MATERIAL SUPPLY SYSTEM: SERVO MOTOR
CUTTING SYSTEM: CONVERTER MOTOR
PILING SYSTEM: SERVO MOTOR
POWER SUPPLY: 380V 50HZ
POWER: 6KW
SIZE OF MACHINE: 5200 × 3000 × 1800 (mm, L×W×H)
WEIGHT OF MACHINE: 1500 KG
OPTIONAL MAKING: Y-360 FULL AUTOMATIC RECIPROCATING TYPE PACKING MACHINE
CANISTER WET WIPES MACHINE

QUANTITY: 1

Learn More

C-4358 FULL-AUTO SINGLE LINE WET TISSUE MACHINE Y-2035 (A), CAPACITY 5 TO 30 PCS/PACKAGE, WIDTH 1100mm

Y-2035 (A) FULL-AUTO SINGLE LINE WET TISSUE MACHINE
MAIN TECHNICAL PARAMETER (SUITABLE FOR 5 TO 30 PCS /PACK)
PRODUCTION FLOW:
UNROLLING - FOLDING – WETTING – CUTTING – PILING – PACKING – DELIVERING
PRODUCTION SPEED: 300 TO 400 PCS/MIN
SUITABLE RAW MATERIAL: AIR-LAID PAPER, SPUNLACE /HOT-ROLLING NON-WOVEN FABRIC
WEIGHT OF RAW MATERIAL: 40 TO 80 G/㎡
WET TISSUE UNFOLDED SIZE: (150 TO 200) × (150 TO 250) (mm, L×W)
WET TISSUE FOLDED SIZE: (75 TO 100) × (45 TO 80) (mm, L×W)

QUANTITY: 1

Learn More

C-4356 FULL-AUTO SINGLE OR DOUBLE SHEET WET TISSUE MACHINE Y-200, WIDTH 900mm

Y-200 FULL-AUTO SINGLE OR DOUBLE SHEET WET TISSUE MACHINE
MAIN TECHNICAL PARAMETER (SUITABLE FOR 1 OR 2PIECES /PACK)
PRODUCTION FLOW: UNROLLING — FOLDING — WETTING — CUTTING — PACKING — DELIVERING
MAIN TECHNICAL PARAMETER:
POWER SUPPLY: 380V 50HZ
POWER: 6KW
SUITABLE RAW MATERIAL: AIR LAID PAPER, SPUNLACE/HOT-ROLLING NONWOVEN FABRIC
SIZE OF RAW MATERIAL: (150 TO 250) × 1000 (mm, W × DIA)
WEIGHT OF RAW MATERIAL: 40 TO 80 G/㎡
WET TISSUE UNFOLDED SIZE: (140 TO 280) × (150 TO 250) (mm, L×W)
WET TISSUE FOLDED SIZE: (70 TO 140) × (35 TO 85) (mm, L×W)
PACKING FILM: OPP/PE, PET/PE
PRODUCTION SPEED: 150 TO 200 PCS/MIN
NET WEIGHT: 1500 KGS
SIZE OF MACHINE: 5700 × 900 × 1650 (mm, L×W ×H)
WETTING SYSTEM: STAINLESS STEEL WATER TANK WITH AGITATOR (CONTINUOUSLY STIRRING & CIRCULATING)
SIZE OF WATER TANK: 800 × 800 (mm, DIA*H) 400L

QUANTITY: 1

Learn More

H-1261 GOOSE FEATHER CLEANING MACHINE

LIST OF COMPONENTS FOR THE GOOSE FEATHER CLEANING MACHINE:

1) RINSING MACHINE OF THE TYPE 2000 (STAINLESS STEEL USED FOR IT)
EXTERIOR DIMENSION: 4000×2000×2600×Ф1800MM
QUANTITY: 1

2) GOOSE FEATHER ADDING MACHINE
EXTERIOR DIMENSION: 4000×1800×3300MM
QUANTITY: 1

3) WATER TANK
EXTERIOR DIMENSION: Ф1930MM×2440MM
QUANTITY: 1

4) DEWATERING MACHINE FLAT PLATE TYPE (BEING EQUIPPED WITH VARIABLE FREQUENCY CONTROL) - 2 SETS
QUANTITY: 2

5)DRYER OF THE TYPE 2000 (BEING EQUIPPED WITH ELECTRONIC WEIGHING)
EXTERIOR DIMENSION: 4500×2100×2900MM
QUANTITY: 1

6)GOOSE FEATHER ADDING MACHINE FOR DRYER(STAINLESS STEEL USED FOR IT AND ELECTRONIC WEIGHING INCLUDED)
EXTERIOR DIMENSION: 1500×1200×3600MM
QUANTITY: 1

7)THE COOLER OF THE TYPE 4700(STEEL & WOOD STRUCTURE, OPTIMIZED MOISTURE PROOF PANEL)
EXTERIOR DIMENSION: 4700×2350×2600×Ф2000MM
QUANTITY: 1

8) SORTING EQUIPMENT
QUANTITY: 2

9) POWER DISTRIBUTION CABINET
QUANTITY: 2

RINSING MACHINE: TYPE 2000

1. EXTERIOR DIMENSION: 4000×2000×2600×Ф1800MM DIAMETER

2.THE MATERIAL OF 14MM IN THICKNESS STAINLESS STEEL IS USED FOR THE WALL FOR WASHING MACHINE AND 5MM IN THICKNESS FOR BARREL

3. THE MATERIAL OF AISI 1045 IS USED FOR THE SPINDLE OF THE SQUARE SHAPE(SPECIFICATION =108MMX108MM). WRAPPED WITH 2MM STAINLESS STEEL IN THE OUTER.
10MM IN THICKNESS STAINLESS STEEL IS FOR HOOP OF VANE.
4MM IN THICKNESS STAINLESS STEEL WHICH IS FOLDED IS FOR VANE.
HOOP SCREW OF M14 X 70 (HIGH STRENGTH GRADE) ARE USED.
THE BEARING HOUSING &BEARING OF UKP318 IS USED FOR THE SPINDLE.

4.THE SIEVE OF 1.5MM IN THICKNESS STAINLESS STEEL IS USED FOR WACHING MACHINE.THE HOLE IS 1.8MM IN DIAMETER. HOLE SPACING 3.8MM .THE STAINLESS STEEL OF 2MM IS USED FOR THE OBLIQUE OF OUTPUTTING THE GOOSE FEATHER.THE OUTLET NEAR DEWATERING MACHINE FOR GOOSE FEATHER CAN BE TURNED UPWARD. FOR GOOSE FEATHER.

5.THE PIPE FOR WATER INLET IS 114MM IN DIAMETER

6.THE POWER OF FAN: 7.5KW AND SPEED: 2900R/M

7.THE PIPE FOR FEEDING GOOSE FEATHER IS 250MM IN DIAMETER.

8.THE REDUCER FOR THE SPINDLE: JZQ-400. THE POWER OF MOTOR IS 15KW AND OUTPUT SPEED IS 42 R/M

9.EXTERIOR DIMENSION OF THE BOTTOM FOR WASHING MACHINE: WIDTH=1600MM;LENGTH=3500MM.ONE SIEVE OF 1MM IN THICKNESS FOR IT.

WATER TANK

1. THE DIMENSION OF TANK: Ф1930MM×2440MM

2.THE STAINLESS STEELOF 2MM IN THICKNESS FOR ITS BARREL AND 3MM FOR THE BOTTOM.THE COVER IS CONSTUCTED WITH ANGLE IRON OF STAINLESS STEEL AND INNER COVER 2MM STAINLESS STEEL PLATE.

DEWATERING MACHINE OF TYPE 1600

1. ONE SETS OF RINSING MACHING OF THE TYPE 2000 IS EQUIPPED WITH TWO SETS DEWATERING MACHINE OF THE TYPE 1600

2.THE POWER OF MOTOR=11KW-17KW.DOUBLE SPEED MOTOR WITH VARIABLE FREQUENCY CONTROL.

DRYER OF TYPE 2000

1. EXTERIOR DIMENSION: 4500×2100×2900×Ф1800MM（DIAMETER）

2. THE MATERIAL OF 14MM IN THICKNESS STAINLESS STEEL(Q345R) IS USED FOR THE WALL FOR WASHING MACHINE. 10MM STAINLESS STEEL(Q345R) IS USED FOR INNER COVER OF THE BARREL AND 10MM STAINLESS STEEL (Q345R) PLATE FOR OUTER COVER OF THE BARREL.

3. THE INNER WALL OF WIND PLATE IS 0.5MM IN THICKNESS AND THE HOLE 1.5MM IN DIAMETER STAINLESS STEEL. 3MM COLD ROLLED PLATE IS USED FOR THE OUTER GATE.

4. THE SEAMLESS PIPE OF Ф108MM×10MM IS FOR THE MAIN SPINDLE.THE STEEL PLATE OF 10MM IN THICKNESS IS FOR THE VANE.THE WIDTH OF THE VANE IS 80MM. HOOP SCREW IS M12X70

6. THERE ARE FOUR INLET OF 1.5INCH IN DIAMETER FOR STEAM.
RELIEF VALVE FROM 3 KILO TO 7 (1 SETS)
THE PRESSURE GAGE (0-16 KILO) (2 SETS)
THE THERMOMETER (0-150 DEGREE) (1 SETS)
THERE ARE THREE DRAIN HOLE OF 1.5 INCH IN DIAMETER AT THE BOTTOM

6. THERE ARE TWO LAYERS FOR GOOSE FEATHER ADDING FOR DRYER: 1.5×1.2×3.6M.THEY ARE MADE WITH STAINLESS STEEL.THE SPECIFICATION OF CHARGING SPOUT ON THE TOP OF DRYER IS 1.55 X 0.55M.

7. THE OUTLET FOR GOOSE FEATHER OF DRYER CAN BE TURNED UPWARD.THE PIPE FOR OUTPUTTING GOOSE FEATHER IS 300MM IN DIAMETER.

8. TWO FANS ARE EQUIPPED FOR PRECISE WASHING LINE.THE POWER OF FAN FOR ADDING GOOSE FEATHER IS 7.5KW,SPEED: 2900R/M.WHICH IS USED TOGETHER WITH GOOSE ADDING MACHINE OF WASHING MACHINE.THE POWER OF FAN FOR DRYER IS 5.5KW,SPEED IS 2900 R/M.

9. MAIN SHAFT SPEED REDUCER FOR BELT BRIDGE MOTOR 7.5KW.OUTPUT SPEED IS 52 R/M
THE COOLER IS OF TYPE 4700

1. EXTERIOR DIMENSION: 4700×2350×2600×Ф2000MM DIAMETER

2. THE EXTERIOR IS CONSTRUCTED WITH THE WHOLE WOOD STRUCTURE.THE MATERIAL OF STEEL WITH 4# ANGLE STEEL AND 30X30 SQUARE TUBE IS FOR THE INNER SKELETON.

3. THE SEAMLESS PIPE OF Ф108MM×10MM IS FOR THE MAIN SPINDLE.THE STEEL PLATE OF 14MM IN THICKNESS IS FOR THE VANE.THE WIDTH OF THE VANE IS 80MM. HOOP SCREW IS M16X70

4. THE DIAMETER OF WIND PIPE: MAIN PIPE IS 300MM IN DIAMETER AND BRANCH IS 250MM IN DIAMETER.THERE ARE FOUR AIR OUTLET OF 300MM IN DIAMETER EQUIPPED EQUALLY SPACE.

5. ONE SIEVE IS EQUIPPED FOR THE COOLER.THE SIEVE IS MADE WITH 0.6MM IN THICKNESS GALVANIZED STEEL SHEET.THE HEIGHT OF HOLE IS 1.1MM.THE SCREEN FRAME IS MADE WITH 3# ANGLE STEEL.

6.THERE ARE TWO SORTING BOX WHICH IS CONSTRUCTED WITH STEEL FRAME AND WOODEN STRUCTURE. SIEVE 14 MESH GALVANIZED MESH BOLD

7. ONE FAN IS FOR THE COOLER.THE POWER OF THE FAN IS 11KW AND OUTPUT SPEED IS 2900 R/M

8. THE MOTOR FOR THE MAIN SPINDLE IS 15KW (6 POLE).THE SPEED OF 140 R/M IS FOR THE COOLER.

QUANTITY: 1

Learn More

REFERENCE NUMBER: K-4373

PICANOL PRESIDENT SHUTTLE LOOMS -72 AND 55 INCH

 

(12) LOOMS 72” (1830mm) WITH STAUBLI

(4) LOOMS ARE 55” (1397mm) WITH STAUBLI

(1) LOOM 72” (1830mm) WITH CAM

13 LOOMS ARE 1973 MODEL CM-C/P PRESIDENT 72 INCHES

4 LOOMS ARE 1975 MODEL CN-C/P PRESIDENT 54 INCHES

AUTOMATIC WEFT RETURN

NO AUTOMATIC WEFT STOPMOTION

AUTOMATIC WARP STOP MOTIONS

REINFORCED FOR HEAVY CANVAS WEAVING

 

AT SEPARATE PRICE THERE IS A LARGE LOT OF SPARE PARTS

ACCESSORIES:

1 WARP BEAM AND CLOTH ROLL

3 SHUTTLES

4 HARNESSES

DROPPERS

LET-OFF AND TAKE-UP: ELECTRICAL

SPEED: 180 RPM

POWER CONSUMPTION: 220 V.

AUTO BOBBIN CHANGE IS OPERATIONAL

WEFT BREAK DETECTION IS OPERATIONAL

LOOM'S BACK REST REINFORCED HAS A SPECIAL CYLINDER AT THE BACK FOR HEAVY DUTY MATERIAL

WARP STOP MOTION IS OPERATIONAL

 

QUANTITY: 17

Learn More

REFERENCE NUMBER: H-1150

WERNER & pfleiderer wide hard and semi sweet dough multipurpose biscuit/cookie production line 1200mm

 

complete with biscuit stacking and full wrapping station

 

product DETAILS

 

ITEM      PRODUCT NAME              DIMENSIONS     WEIGHT               PPM

1              TEA BISCUIT                       60Х45Х5.2           90 GRAM             127

2              TEA BISCUIT                       60Х50Х6.3           180 GRAM           80

3              TEA BISCUIT                       60Х50Х5.2           165 GRAM           90

4              CRACKER ROUND             40 Х5MM             42 GRAM             140

5              CRACKER TAIB                   65Х50Х6.5           80 GRAM             130

6              CREAM SANDWICH         46Х34Х12             90 GRAM             70

7              HONEY GLUCOSE             48Х38Х6.5           50 GRAM             160

8              MINI SANDWICH Rnd.  27Х5                      35 GRAM             45

9              MINI CRACKER ROUND 28Х5MM              35 GRAM             45

 

 

MACHINE DETAILS

 

M/C                                       TYPE

1              WATER METER 

2              MIXER                                   TYPE Z K 900

3              DOUGH TROLLY

4              DOUGH FEEDING SYSTEM           

5              LAMINATOR                       TYPE LU 800 E

6              ROTARY CUTTING            TYPE RTA-G 1000

7              MOULDING MACHINE   TYPE RTA-G 1000

8              CUTTING ROLLER             TYPE 1000

9              MOULDING UNIT             TYPE 1000

10           EGG WSH APPLICATOR  TYPE DSV 1000

 

 

 

 

MACHINE DETAILS (CONT.)

 

M/C                                                       TYPE

11           TOPPING APPLICATOR                  TYPE 1000

12           WIRE MESH BAND OVEN              SN 1000/60M

13           ARCAL SPRAY UNIT                         TYPE 1000

14           COOLING SYSTEM CONVEYOR   

15           CONVEYOR # 1                                  CAVANNA

16           CONVEYOR #2                                   CAVANNA

17           BY PASS CONVEYOR                        CAVANNA

18           SLIDE CONVEYOR                             CAVANNA

19           TRACK CONVEYOR                           CAVANNA

20           PHASING CONVEYOR                     CAVANNA

21           ACCUMULATION CONVEYOR     CAVANNA

22           VIBRATING UNIT                              CAVANNA

  AND CONVEYOR BELT                 

23           SLUG BISCUIT FEEDER                    CAVANNA

24           PENNY STACKET                               CAVANNA

25           TRANSFERRING GROUP                                CAVANNA

26           CAVANNA PACKGAIN MACHINE               ZERO5 NKZ

27           SINLON PACKAGE MACHINE       SL500

28           COOKIES CAPPER                             MODEL 200 MK V1-3 METRIC

 

LINE DIMENSIONS:

 

TOTAL LENGTH OF LINE: 192 meters

LAMINATOR CONVEYOR: 20 meters

 

OVEN:

 

TOTAL LENGTH 75 meters

WORKING WIDTH: 1200mm

TOTAL WIDTH including: OVEN BODY: 2140mm

 

 

LINE DIMENSIONS:

 

COOLING CONVEYOR

LENGTH: 68 Meters

WIDTH of BELT: 1090mm

FRAME: 130mm

 

CAVANNA WRAPING AREA

LENGTH: 20 meters

 

CAVANNA WRAPPING MACHINE 05 NKZ

LENGTH: 9 Meters

Learn More

REFERENCE NUMBER: M-3561

LINE FOR THERMO BONDED WADDING YEAR 1987 - FOR MATTRESS AND BUILDING SECTOR, ETC

 

LINE FOR THERMO BONDED WADDING  -YOC  1987  - FOR MATTRESS AND  BUILDING SECTOR, ETC.

( ESPECIALLY IN POLYESTER + NATURAL FIBERS MIXED).

THE LINE HAS A PRODUCTION OF 350/400 KGS PER HOUR WITH A WORKING WIDTH FROM 150 CMS INTIL 240.

 

COMPOSITION :

. BONINO LOADER   WORKING WIDTH  mm. 2800

. BONINO CARDING MACHINE WORKING WIDTH  mm. 2800 SINGLE DOFFER

. TECHNOPLANTS CROSS LAPPER WORKING WIDTH   ENTRY/EXIT mm. 3000

. SICAM OVEN  - 2 FIELDS. WORKING WIDTH  2400 mm. + COOLING SECTION

. TECNICA TESSSILE CUTTING MACHINE WITH HORIZONTAL AND VERTICAL CUT WORKING WIDTH  mm. 3000

. MECAP  PACKAGING MACHINE FOR ROLLS

 

QUANTITY: 1

Learn More

REFERENCE NUMBER: P-4337

WET TOWEL MAKING MACHINE.(HALF FOLD TYPE)

 

Model: L60
SPECIFICATIONS:
Model: Z, V, W,Z+Z...
Packing Item: Non-woven fabric
Capacity: 450-640 sheets/min or 20-80bags/min
Raw Material Size: parent roll dia: 1000mm,Core dia:76.2mm
Wet towel Size: Length 100mm. Width: 50-100mm (adjustable)
Open size: Length 200mmx Width(150-250)mm
Products size:Length:130-350mm Width:50-120mm, Thickness:5-45mm
Wetting System: Moistening system complete with 100%-400%, automatic,  excess liquid
Cutting system: stainless steel round cutter
Counter system: electronic meter
Feeding system: by manual
Hole system: synchronization rotary cutter
Label system: synchronization sticker
Power: 3 phase AC 380V  50/60Hz 8KW
Machine space: L:5000mmXW 4300mm XH1900mm (L)
Machine weight: 2000kg
Remarks: Machine made by stainless steel. Special size by order

OPTION EQUIPMENT
Coding machine Stainless steel storage tank

 

QUANTITY: 1

Learn More