J-4678 AUTOMATIC HIGH SPEED COTTON PAD MACHINE (HOT MELT TYPE) -700 TO 1000 PIECES PER MINUTE

REFERENCE NUMBER: J-4678 AUTOMATIC HIGH SPEED COTTON PAD MACHINE (HOT MELT TYPE) -700 TO 1000 PIECES PER MINUTE AUTOMATIC MACHINE FROM RAW MATERIAL FEEDING TO FINISHED PRODUCTS. PRODUCT SHAPE CAN BE CUSTOMIZED ACCORDING TO CUSTOMER NEEDS. ONE MACHINE CAN BE USED FOR A VARIETY OF MOLDS. AUTOMATICALLY COLLECTS MATERIALS INTO ROLLS. PLC CONTROL CAN SET THE NUMBER OF EACH STACK. CONTROL MODE: RELAY CONTROL MACHINE DIMENSIONS: LENGTH 4360 x WIDTH 900 x HEIGHT 1710mm VOLTAGE: 220 VOLTS, 60 Hz RATED POWER: 8 KW ACTUAL POWER: 6 KW MAIN MOTOR: 2.2 KW CAPACITY: 700 TO 1000 PIECES PER MINUTE, DEPENDING ON MATERIAL AND PRODUCT SIZE MATERIAL ROLL DIAMETER: 600mm (DEPENDS ON PRODUCT SIZE) INCLUDES MACHINE OPERATION MANUAL AND TOOLBOX DIAMETER OF THE DIE: 79mm DIAMETER OF THE PAD IS 58mm WIDTH OF THE FABRIC: 270mm WEIGHT OF MACHINE: 1500 TO 2000 KG TOTAL KW: 17 KW DIAMETER OF THE CHUCK (INSIDE DIAMETER OF THE ROLL): 65mm MAXIMUM DIAMETER OF THE ROLLS: 800mm CONTROLLER: DELTA PLC WITH TOUCH SCREEN TO ADJUST PARAMETERS WITH BACKUP FEED ROLL WITH TENSION CONTROL SO WHEN ONE FEED ROLL IS FINISHED THE SECOND ONE CAN BE FED. THE NUMBER OF PIECES PER STACK CAN BE SET ON THE TOUCHSCREEN. TOTAL 24 ROUND SHAPES ON THE DIE ROLLER THERE ARE 2 CONTROLLERS ON THE MATERIAL RACK, ONE IS A TENSION ROLLER (MARKED IN BLUE ON PICTURES), IT INCLUDES A CONTROL BOX (ALSO MARKED IN BLUE), AN AIR SHAFT (GOLD COLOR), AND A MAGNETIC POWDER BRAKE TO CONTROL MATERIAL TENSION WHILE RUNNING. THE OTHER CONTROLLER IS A SERVO RECTIFYING CONTROLLER (MARKED IN RED ON PICTURES), WHICH FUNCTIONS AS AN EDGE POSITION CONTROLLER (EPC), LINE POSITION CONTROLLER (LPC), ETC. THE MAIN FUNCTION IS TO CONTROL THE BALANCE OF MATERIAL DURING RUNNING, AND IT CAN BE AUTOMATICALLY CORRECTED. MACHINE DOES NOT USE ULTRASONIC WELDING. IT CUTS THROUGH THE TRANSMISSION OF THE CHAIN AND THE ASSISTNACE OF THE SHIM ROLLER. DIE CUTTING IS CONTROLLED BY THE DIE ROLLER AND SHIM ROLLER WHICH ARE CUT BY ROLLING AND DRIVEN BY CHAIN MACHINE INCLUDES 2 LAYERS TENSION CONTROLLER AND SERVO RECTIFYING CONTROLLER MATERIAL RACKS. MACHINE CAN BE SET TO STACK 100 PIECES PER STACK. QUANTITY: 1