NovaStar, LC174, Double Sided Lamination Machine, 400-800mm Production Width, 70-90kg/hr Capacity (New)

Overview

1. Double side lamination machine

2. For double side coating

3. Material: PP, LDPE plastics

4. Production width: 400 mm to 800 mm

5. Production thickness: 0.02 mm to 0.05 mm

6. Line speed: 25 m/min to 85 m/min

7. Output capacity: 70 kg/hr to 90 kg/hr (single side)

Extruders

1. (2) extruders

2. Screw diameter: 70 mm, L/D = 30/1

3. Driving motor: 20 hp AC with Fuji inverter and reactor

4. 4 heating zones

5. Heating capacity: 20 kW

6. Manual screen changer

7. Moving system: 1 hp brake motor

8. Electric panel

9. Vacuum autoloader

T-Dies

1. (2) T-dies

2. Width of die: 1050 mm

3. 5 heating zones

4. Heating capacity: 12.5 kW

5. With adjuster device

Unwinder Section

1. Maximum diameter width: 1000 mm x 1000 mm (L)

2. 2 tension controls (powder brake)

3. Edge position control

4. Pressure roller

Laminating Section 1

1. Cooling roller: 450 mm x 1000 mm (L)

2. Silicon roller: 310 mm x 1000 mm (L)

3. Guide roller: 75 mm x 1000 mm (L)

4. Expansion roller: 100 mm x 1000 mm (L)

5. Driving motor: 5 hp AC with Fuji inverter and reactor

6. Pre-heater roller: 350 mm x 1000 mm (L)

Laminating Section 2

1. Cooling roller: 450 mm x 1000 mm (L)

2. Silicon roller: 310 mm x 1000 mm (L)

3. Guide roller: 75 mm x 1000 mm (L)

4. Expansion roller: 100 mm x 1000 mm (L)

5. Driving motor: 5 hp AC with Fuji inverter and reactor

6. (2) E.P.C cutting devices (1/4 hp each)

7. Pre-heater roller: 350 mm x 1000 mm (L)

Winding Section

1. (3) winding rollers: 270 mm x 1000 mm (L)

2. PU winding roller: 270 mm x 1000 mm (L)

3. Driving motor: 5 hp AC with Fuji inverter and reactor

4. Maximum diameter width: 1000 mm x 1000 mm (L)

5. Cutting or roll change device

Edge Yarn Reclaiming System

1. Crusher: 2 hp motor

2. Conveying blower: 3 hp motor

3. Driving motor: 1/2 hp motor

4. Store tank

Operation Electric Control Panel

1. Synchronous speed control: 1 set (extruder + laminating + winder)

Other Equipment Attached With Machine

1. 10 hp water cooling chiller

2. 20 ton cooling tower

3. 2 hp volute pump

4. 2 hp air compressor

5. Spare parts