Tearing Line

MAKE: LAROCHE
MODEL: SUPER OLYMPIC
WIDTH: 1500mm
YEAR: MID 1980’S
6 CYLINDERS EACH LINE
CYLINDER DIAMETER: 1000mm
ALL CYLINDERS ARE DESIGNED FOR PINNED LAGS AND THERE IS LIFE LEFT IN MOST OF THE LAGS SETS.
LAGS: (1) 8mm x 135, (1) 10mm x 160, (1) 12 x 166, (3) 13mm x 174
EACH CYLINDER FED BY A FEED ROLL TO FEED DISH COMBINATION AND THE FIBER IS TRANSFERRED TO THE FOLLOWING CYLINDER VIA A CONDENSING SECTION.
MOTORS: 3 x 150 HP 575 VOLT
TOTAL REQUIRED POWER: 875 AMPS
NEW CONTROLS WITH ABB DRIVES
FEED CHUTES
LUMMUS BALERS
PINNED CYLINDERS
TEMAFA BLENDING BINS
EXIT CONVEYORS
EACH SECTION EQUIPPED WITH ANSUL DRY POWDER FIRE PROTECTION SYSTEM THAT IS ACTIVATED FROM EMBER DETECTED IN THE DUCT REMOVAL PIPING.
LINES INCLUDE ALL NECESSARY FANS, MAGNETS, DUCTING AND WIRING

IN PERFECT WORKING ORDER

QUANTITY: 2 LINES

REFERENCE NUMBER: L-4867

DELL’ORCO RAG PICKING (TEARING)  LINES 1500mm (59”) WIDTH, ( 3 lines) WITH PIERRET GUILLOTINES

6 X CYLINDER LINE WITH HOPPERS, CYCLONES, & WILLOWS

3 X CYLINDER LINE WITH A HOPPER AND A WILLOW

5 X CYLINDER LINE (NOT CONNECTED TO POWER), WITH HOPPERS, CYCLONES, AND WILLOWS

TIMTEX ROTARY FILTER (2009)

2 PIERRET LOADERS

4 PIERRET CUTTERS

SPARE PARTS, INCLUDING BEARINGS, BELTS, MOTORS, AND MACHINE PARTS

R-1170 DELL’ ORCO VILLANI RAG TEARING LINE + BALE PRESS, YEAR 1989 TO 1999

DETAILS:
DELL’ ORCA VILLANI RAG TEARING LINE + BALLING MACHINE
COMPOSED BY:
ITEM 001
DELL’ ORCA VILLANI CUTTERS
YEAR: 1989
QUANTITY: 2

ITEM 002
DELL’ ORCA VILLANI MIXING ROOMS + BIN EMPTIER
TYPE: FA/3030/T
QUANTITY: 2

ITEM 003
DELL’ ORCA VILLANI VOLUMATIC FEEDER
MODEL: CARICATORE
TYPE: CS/1600
YEAR: 1999
QUANTITY: 1

ITEM 004
DELL’ ORCA VILLANI RAG TEARING MACHINE
4 CYLINDERS
YEAR: 1999
WIDTH: 1500mm
EACH DRUM MODEL: M/1500
TYPE: SFILACCIATRICE
QUANTITY: 1

ITEM 005
DELL’ ORCA VILLANI VOLUMATIC FEEDER
MODEL: CARICATORE
TYPE: CS/1600
YEAR: 1989
QUANTITY: 1

ITEM 006
DELL’ ORCA VILLANI RAG TEARING MACHINE
3 CYLINDERS
YEAR: 1989
WIDTH: 1500mm
EACH DRUM MODEL: M/1500
TYPE: SFILACCIATRICE
QUANTITY: 1

ITEM 007
DELL’ ORCA VILLANI BALE PRESS
TYPE: RA/100
WITH 2 CHAMBERS (ROTATIVE SYSTEM)
WITH WEIGHING DEVICE (SCALE FOR KG OF EACH BALE)
QUANTITY: 1

ITEM 008
DELL’ ORCA VILLANI DUST COLLECTING INSTALLATION
WITH BAGS TO COLLECT THE DUST
QUANTITY: 1

QUANTITY: 1 LINE

M-1696 MARGASA COMPLETE RECYCLING/TEARING LINE, YEAR 2012, WORKING WIDTH 1500mm

2 ROTARY CUTTERS TYPE CMT-900, WORKING WIDTH 900mm, INCLUDING FEEDING CONVEYORS.
1 ELECTRONIC METAL DETECTOR, MOUNTED ON FEEDING CONVEYOR OF THE 1ST CUTTER.
1 PNEUMATIC MATERIAL TRANSPORT WITH SPECIAL FAN FOR RAGS ETC.
1 STATIONARY ZIG-ZAG HUMP MAGNET MOUNTED IN TUBE FOR MATERIAL TRANSPORT.
2 MIXING/ RELAXING STORAGE BINS FOR CUTTED RAGS WITH SPRAYING ROOM
IN FRONT OF:
1 FEEDING MACHINE TYPE CCS-1500, WORKING WIDTH 1500mm, AUTOMATIC PNEUMATIC FEEDING FROM STORAGE BINS, ELECTRONIC LEVEL CONTROL AND DOSING CONVEYOR TO TEARING LINE.
1 RAG TEARING LINE WITH 4 SECTIONS TYPE MASTER MCM-1550-DD, WORKING WIDTH 1500mm, TAMBOUR DIAM. 1000mm.
1 ELECTRONIC CONTROL PANEL FOR THE WHOLE LINE INCL. TOUCH SCREEN AND INVERTER DRIVER FOR SEVERAL MOTORS.
6 FILTER UNITS.

- ALL EQUIPMENT “AS NEW” SINCE RUNNING ONLY A FEW HOURS.
- CAPACITY UP TO 1000KG/HR.

M-0033 ROLANDO COMPLETE TEARING LINE YEAR 1994 WIDTH 2000mm - 2 CYLINDERS

WORKING WIDTH 2000mm
YEAR 1994
CONSISTING OF:
LOADING INSTALLATION
LIQUID RESP. OIL SPRAYING UNIT
AUTOMATIC FEEDING RA1/6mm 2000
TEARING MACHINE RM9 WITH 2 CYLINDERS, 2000mm

C-3796 MARGASA 4-DRUM TEARING LINE, WORKING WIDTH 900mm TO 1500mm, YEAR 2012

MARGASA 4-DRUM TEARING LINE
YEAR: 2012
WORKING WIDTH: 1500mm

CONSISTING OF:

MARGASA CMT-900 ROTARY CUTTERS
WORKING WIDTH: 900mm
QUANTITY: 2

METAL DETECTOR
QUANTITY: 1

PNEUMATIC TRANSPORT
QUANTITY: 1

MAGNETIC DUCT
QUANTITY: 1

BIG STORAGE BOX
QUANTITY: 1

FEEDING
QUANTITY: 1

MARGASA MASTER MCM-1500-DD 4-DRUM TEARING MACHINE
WORKING WIDTH: 1500mm
DRUM DIAMETER: 1000mm
WITH:
PRESSING ROLLER
WITH A LARGE DIAMETER TO COMPACT THE MATERIAL
BEFORE THE FIRST FEED ROLLER OF THE TEARING MACHINE
BEATERS THAT ELIMINATE THE FOREIGN SUBSTANCES
SUCH AS PLASTICS
WOODS
AND BUTTONS
THAT DUE TO WEIGHT HAVE FALLEN ON THE RETURN APRON
RETURN LATTICE
WITH MOTOR-REDUCER OF 1.5 KW
THAT DRIVES THE BIT RETURN LATTICES
OF THE MATERIAL TO BE RECYCLED
QUANTITY: 1

TAKES 4 CONTAINERS TO LOAD

QUANTITY: 1 LINE

M-6066 LAROCHE TEARING LINE FOR SHODDY, WIDTH 1400mm, CAPACITY 400 KG/H

OFFER 001
LAROCHE TEARING LINE
MAKE: LAROCHE
WORKING WIDTH: 1400mm
PRODUCT: SHODDY (COTTON AND ACRYLIC)
CAPACITY: 400 KG PER HOUR

OFFER 002
LAROCHE OLYMPIC TEARING LINE
DIMENSIONS (EACH LINE): 5M WIDTH, 10M LENGTH

OFFER 003
HOPPER FEEDERS

OFFER 004
OVERHEAD GANTRY SYSTEM

OFFER 005
DUST COLLECTION SYSTEM

QUANTITY: 1 LINE

M-6038 LAROCHE TEARING LINE FOR SHODDY, WIDTH 1400mm, CAPACITY 400 KG/H

OFFER 001
TEARING LINE
MANUFACTURER: LAROCHE
WORKING WIDTH: 1400mm
PRODUCT: SHODDY (COTTON AND ACRYLIC)
CAPACITY: 400 KG/H

CONSISTS OF:
OFFER 002
LAROCHE OLYMPIC TEARING LINE

OFFER 003
CUTTING AND CONVEYING SYSTEM

OFFER 004
HOPPER FEEDERS

OFFER 005
DUST COLLECTION SYSTEM

QUANTITY: 1 LINE