T-8540 WET WIPES MACHINE, CAPACITY 30 TO 120 PIECES PER PACK

REFERENCE NUMBER: T-8540 WET WIPES MACHINE, CAPACITY 30 TO 120 PIECES PER PACK WET WIPES MACHINE CAPACITY: 30 TO 120 PIECES PER PACK DRIVE MODE: AUTOMATIC STABLE SPEED: 3500 TO 4800 PIECES PER MINUTE (25 TO 60 BAGS) MACHINE SIZE (L X W X H): 12200 × 2400 × 2200mm PRODUCTION FLOW: RAW MATERIAL LOADING - VERTICAL-FOLDING - TISSUE WETTING - TISSUE CUTTING - TISSUE COUNTING AND STACKING - TISSUE DELIVERY - FILM DATE PRINTING, PUNCHING AND LABELING - TISSUE PACKING - FULL AUTO PLASTIC LID APPLICATION PRODUCT TYPE: BABY WET WIPES; HOUSEHOLD WET WIPES (30 TO 120 PCS/PACK) TECHNICAL FEATURE: THIS MACHINE ADOPTS FULL SERVO DRIVE AND PLC CONTROL SYSTEM FOR OPERATION. IT’S MADE OF RAW MATERIAL LOADING DEVICE, TENSION DEVICE, FOLDING DEVICE, AUTOMATIC WETTING SYSTEM, AUTOMATIC COUNTING DEVICE AND SLITTING DEVICE, PRINTING AND PUNCHING DEVICE, LABELING DEVICE, PACKING AND GUSSETING DEVICE, FULL AUTO PLASTIC LID APPLICATION FOR FINISHED PRODUCTS. STAINLESS STEEL IS APPLIED TO THE COVER OF MACHINE AND MAIN SPARE PARTS. THE PARTS IN CONTACT WITH LIQUID AND FABRIC ARE MADE OF STAINLESS STEEL. ALL THE PROCESSES ARE FINISHED ON THE MACHINE WITHOUT MANUAL LABOR INVOLVED, SO THE FINISHED PRODUCT MEETS HYGIENIC STANDARD. THE FOLDING DEVICE IS SPECIALLY DESIGNED TO MAKE VARIOUS FOLDING WAYS FEASIBLE. IT’S SMART AND SPEEDY MAIN TECHNICAL PARAMETERS: SUITABLE MATERIAL: SPUNLACE NON-WOVEN, HOT ROLLING NON-WOVEN FABRICS, AIR-LAID PAPER PACKING FILM: OPP/PE, PET/PE, PET/AL/PE GSM OF RAW MATERIAL: 40-80G/M2 CAPACITY SPEED: 3500 TO 4800 PSC/MIN (25 TO 60 BAGS) FOLDING WAY: “Z”“W””C” TYPE (POP UP AND NON-POP UP) SIZE OF PRODUCT (UNFOLDED): (135 TO 170) X (170 TO 210) (mm)(LXW) (MODIFIABLE) SIZE OF PRODUCT (FOLDED): (135 TO 170) X (90 TO 110) (mm)(LXW) (MODIFIABLE) ELECTRICAL SOURCE: AC380V 50/60Hz POWER: 15KW MACHINE SIZE: 12200mm X 2450mm X 2200mm (L X W X H) MACHINE WEIGHT: 5000KG WETTING SYSTEM: ONE STAINLESS STEEL WATER TANK WITH AGITATOR (PRESET FULL-AUTO CONTINUOUS & CIRCULAR STIRRING SYSTEM); +ONE FLOW METER= THE AMOUNT OF SPRAYED LIQUID CAN BE REGULATED CONTROL SYSTEM: PRE-PROGRAMMED FULL-AUTO PLC CONTROL SYSTEM; FREQUENCY SPEED CONTROLLING (PROVIDE ALL THE PROGRAMS TO BUYER) PUNCHING SYSTEM: SYNCHRO ROTARY CUTTER COUNTING SYSTEM: AUTO-COUNTING (OPERATION INTERFACE SETTING) MATERIAL LOADING DEVICE: 2 HOLDERS SLITING INTO 12 CHANNELS, AUTOMATIC TENSION CONTROLLER BABY WET WIPE FOLDING MACHINE MAIN PARTS PLC: 1 SERVO MOTOR (RECEIVING TISSUE): 1 TICCUED COMPRESSED SERVO MOTOR: 1 CUTTING SERVO MOTOR: 1 TISSUE DELIVERY SERVO MOTOR: 1 TISSUE DELIVERY SERVO MOTOR: 1 TISSUE STACKING SERVO MOTOR: 1 TURBINE WORM REDUCER MOTOR: 1 FREQUENCY CONVERTER: 1 TOUCH SCREEN: 1 AIR SWITCH: 5 SWITCHING POWER SUPPLY: 1 EMERGENCY STOP SWITCH: 3 RELAY: 3 TRANSFORMER: 2: 400L WATER TAND: 2: ELECTROMAGNETIC CONTACTOR: 1 SEVOR MOTORS: 4 SEVOR MOTOR: 1 MOTORS CONTROLLED DEVICE: 1 LIQUID RELAY: 1 BUTTON BOX: 2 INCHING BUTTON: 2 SENSORS: 2 AIR SENSOR: 1 PANASONNIC SENSORS: 3 STAINLESS WATER RECYCLE MOTOR: 1 3 COLORS ALARM: 1 PACKAGING MACHINE SYSTEM CHARACTER: PLC: 1 LABELING DEVICE: 2 LABLING SERVO MOTOR: 1 SYNCHRONOUS FEEDING SYSTEM: 1 HORIZONTAL-SEALING BLADE: 1 HORIZONTAL-SEALING BLADE: 1 TURBINE WORM REDUCER MOTOR: 3 MAIN SERVO MOTOR: 1 TOUCH SCREEN: 1 AIR SWITCH: 10 SWITCHING POWER SUPPLY: 1 ALARM LIGHT: 1 EMERGENCY STOP SWITCH: 1 PROXIMITY SWITCH: 2 THINKNESS SENSOR (DETECTOR): 1 TEMPERATURE CONTROL: 1 SOLIDITY RELAY: 4 OMRON RELAY: 2 SRSVOR MOTOS: 7 SENSORS: 1 OMRON SENSOR: 2 OMRON SENSOR: 1 VALVE: 6 SEALING HEATER: 4 THERMOCOIPLE: 4 DATE PRINTING DEVICE: 1 3 COLORS ALARM: 1 SPARE PARTS LIST TISSUE SLITTING KNIFES (INSITE THE KNIFES) 10 PCS DOWN KNIFES 5 PCS TISSUE CUTTING KNIFE UPPER KNIFE LOWER KNIFE 1 SET SENSOR 10 PCS TISSUE DELIVERY BELT 2 PCS WHITE SMALL BELT 2 PCS HEATING ROD AND THERMOCOUPLE 5 PCS EACH TYPE SENSOR 2 PCS TOOL 1 SET SCREW 1 PACKAGE FULL-AUTO WET WIPES LID APPLICATOR MACHINE PRODUCTION FLOW: LABELING - DELIVERING - GRAB THE LID - STICKING ROBOT LID APPLICATOR MACHINE IS USED TO FINISH GUMMING, PASTE THE COVER ETC, PROCESS IN THE WET WIPES BAGS LABEL POSITION, INSTEAD OF A LOT OF MANUAL LABOR, IMPROVE WORK EFFICIENCY, SPEED OF PASTING THE COVER IS 50 TO 70 PCS/MIN SPEED: 50 TO 70 PIECES/MIN, SPEED IS RELATED TO THE SIZE AND SHAPE OF THE COVER REPEATABILITY: UPPER AND LOWER ACCURACY OF 1mm, LEFT AND RIGHT ACCURACY OF 2mm, COLOR AND SHAPE DETECTION AND BEING ON THE LABEL MACHINE SIZE: 3736mm X 1300mm X 2100mm (L X W X H) POWER: 3 PHASE, 380V FIVE LINES, CAPACITY: 10KVA POWER CONSUMPTION: WORK NO MORE THAN 3 KW, STANDBY OPERATION IS NOT GREATER THAN 1.5KW COMPRESSED AIR: PRESSURE 0.6-0.8MPA ADAPT LID DIMENSIONS: LENGTH 50 TO 200mm, WIDTH 50 TO 120mm, HIGH 2 TO 10mm ADAPT WIPES DIMENSIONS: LENGTH 50 TO 300mm, WIDTH 50 TO 200mm, HIGH 20 TO 120mm CONTROL MODE: PRESET AUTOMATIC CONTROL SYSTEM CONFIGURATION: SERVO MOTORS OPERATION SYSTEM: PANASONIC CONTROL SYSTEM FULL-AUTO WET WIPES LID APPLICATOR MACHINE: MITSUBISHI PLC: 1 PANASONIC MAIN ROBOT: 1 PANASONIC SEVOR MOTOR: 4 ROBOT MOVEMENT CONTROL SYSTEM: 1 REDUCER: 4 CAMERA: 1 VALVE: 3 LABELING SEVOR MOTOR: 1 LABELING SENSOR: 1 GLUE SPRAY: 1 7 INCH DISPLAY SCREENS: 1 LABELING RUNNING MOTOR: 1 PANASONIC LABELING DETECTOR CONVEYOR MOTOR OMRON ENCODER: 1 VISION SYSTEM: 1 GULE MELTING SYSTEM: 1 QUANTITY: 1