TT-1389 LAB RING SPINNING FRAME
TT-1389 LAB RING SPINNING FRAME
KEY SPECIFICATION:
CONTROL MODE: TOUCH SCREEN & PLC
NUMBER OF SPINDLES: 6
APPLICABLE FIBER LENGTH: 22 TO 50mm
DRAFT RANGE: 10 TO 50
DRAFT CONTROL: AUTOMATIC
ROLLER DIAMETER: FRONT ROLLER: Φ25mm, MIDDLE ROLLER: Φ25mm
BACK ROLLER: Φ25mm
CENTER DISTANCE OF ROLLERS: FRONT AND MIDDLE: 43mm
FRONT AND BACK: 143mm
PRESSURE MODE: SPRING CRADLE
TWIST SETTABLE RANGE: 200 TO 2,000 TWIST/M
RING DIAMETER: RING NOT NEEDED IF THERE IS NO NEED FOR TWISTING FUNCTION. THIS MACHINE WILL USE A SHAFT TO MOVE THE YARN UP AND DOWN TO WIND ON THE PIRN
TOTAL KW: 1.5 KW
VOLTAGE: 220 VOLTS, 3-PHASE, 60 Hz
WEIGHT: 650 KG
DIMENSIONS: 1750 x 760 x 1950mm
SPINDLE SPEED: 3800 RPM
QUANTITY: 1 SET
In stock
SKU
TT-1389
REFERENCE NUMBER: TT-1389
LAB RING SPINNING FRAME
LAB RING SPINNING FRAME
APPLICATION:
LAB RING SPINNING FRAME IS USED TO SPIN ROVING TO BE SPUN YARN THROUGH DRAFTING AND RING SPINNING. IT’S THE IDEAL SYSTEM FOR TEACHING, RESEARCHING, ETC.
FEATURES:
DELTA BRAND PLC, DRIVE, SERVO MOTOR;
PLC + TOUCH SCREEN CONTROL, EASY TO LEARN AND OPERATE;
USE TOUCH SCREEN AS MAN-MACHINE INTERFACE, INPUT TECHNICAL PARAMETERS AND SHOW MACHINE RUNNING STATE BY TOUCH SCREEN;
USE S/Z TWIST TURNING;
ROTATION SPEED OF SPINDLE ACCURATE TO ±1%;
ALUMINUM PROFILE BODY FRAME WITH FOUR CASTERS, FREE TO MOVE;
MODULAR INDEPENDENT DRIVE FOR DRAFTING, SPINDLE BLADE AND FLYER;
MULTI-FUNCTIONAL DESIGN, EASY TO CLEAN, SET AND MAINTAIN;
KEY SPECIFICATION:
CONTROL MODE: TOUCH SCREEN & PLC
NUMBER OF SPINDLES: 6
APPLICABLE FIBER LENGTH: 22 TO 50mm
DRAFT RANGE: 10 TO 50
DRAFT CONTROL: AUTOMATIC
ROLLER DIAMETER: FRONT ROLLER: Φ25mm, MIDDLE ROLLER: Φ25mm
BACK ROLLER: Φ25mm
CENTER DISTANCE OF ROLLERS: FRONT AND MIDDLE: 43mm
FRONT AND BACK: 143mm
PRESSURE MODE: SPRING CRADLE
TWIST SETTABLE RANGE: 200 TO 2,000 TWIST/M
RING DIAMETER: RING NOT NEEDED IF THERE IS NO NEED FOR TWISTING FUNCTION. THIS MACHINE WILL USE A SHAFT TO MOVE THE YARN UP AND DOWN TO WIND ON THE PIRN
TOTAL KW: 1.5 KW
VOLTAGE: 220 VOLTS, 3-PHASE, 60 Hz
WEIGHT: 650 KG
DIMENSIONS: 1750 x 760 x 1950mm
SPINDLE SPEED: 3800 RPM
TWIST DIRECTION: S OR Z
MAX. SPEED OF SPINDLE: 12,000RPM
SPINDLE GAUGE: 70mm
SPINDLE LENGTH: 205mm
RING DIAMETER: Φ42mm
YARN DENSITY RANGE: 6~99TEX (6~100NE)
CAPACITY: APPROX. 0.25~1KG/H
POWER SUPPLY: AC220V, 50Hz
NET WEIGHT: 430KG
STANDARD CONFIGURATION:
GAUGE: 3 PCS
IRON ROLLER: 1 PC
TOP APRON COT: 4 PCS
BOTTOM APRON COT: 4 PCS
LOOSE BOSS ROLLER (FRONT & BACK): 1 PC FOR EACH
HORN MOUTH: 6 PCS
BELT: 1 PC
TRAVELLER: 100 PCS
BOBBIN PLASTIC TUBE: 30 PCS
GAUGE (CENTER TO CENTER DISTANCE BETWEEN SPINDLES: 70mm
RING DIAMETER: NO NEED FOR RING DIAMETER, IF YOU HAVE NO DEMAND FOR TWISTING FUNCTION, THEN RING IS NOT NECESSARY. THIS MACHINE WILL USE A SHAFT TO MOVE THE YARN UP AND DOWN TO WIND ON YOUR PIRN.
8 SPINDLES
DIMENSION: 1750 X 760 X 1950mm
SPINDLES RPM TO SHOW THE SPEED, MAX. SPEED IS 3800RPM
COMMON FEEDING YARN BOBBIN HEIGHT IS ABOUT 180mm
QUANTITY: 1 SET
Write Your Own Review