TT-2926 CHAN LI 202C 112” JRT SLITTER REWINDER WORKING WIDTH 2850mm, YEAR 2014

REFERENCE NUMBER: TT-2926 CHAN LI 202C 112” JRT SLITTER REWINDER WORKING WIDTH 2850mm, YEAR 2014 CHAN LI 202C JRT SLITTER REWINDER WEB WIDTH: 112” WORKING WIDTH: 108” OUTPUT: 500 MPM CHAN LI JUMBO UNWIND STAND: 72” DIAMETER, SHAFTLESS CHAN LI DOUBLE EMBOSSING UNIT: (2) STEEL ROLLS AND (2) RUBBER ROLLS PERFORATION UNIT: 3.94” PERFORATION LENGTH LOG DIAMETER RANGE: 4.72” - 15.76” MINIMUM SLITTING WIDTH: 2.36” TRIM SLITTER AND BLOWER: 7.5 HP MITSUBISHI FX3U SERIES PLC AND AC DRIVE MOTOR SIEMENS ELECTRICAL PLATFORM ELECTRICS: 480VAC, 3PH, 60Hz YEAR OF MANUFACTURE: 2014 AVAILABILITY: IMMEDIATE INSPECTION: IN PRODUCTION DESCRIPTION POWER SUPPLY: 480V, PHASE 3, CYCLE: 60 Hz 1. AUTOMATIC JRT SLITTER & REWINDER MACHINE TYPE 202C WORKING WIDTH: 2850mm WIDTH OF PAPER: MAX. 2750mm JUMBO ROLL STAND: MAX 1800mm SHAFTLESS TYPE UNWIND STAND BASIS WEIGHT: 16-45 GSM MECHANICAL SPEED: 0-500 M/MIN. REWINDING SPEED: OVER 400 M/MIN. LOG DIAMETER: 120 - 400mm REWINDING SHAFT: 45mm X 5 PCS INSTALLED POWER: AC 30 HP MIN. SLITTING WIDTH: 60mm INSTALL POWER: 1/2 HP +1/4 HP OTHER EQUIPMENT: 1) FOLDING UNIT FOR REWINDING UNIT 2) BLOWING SYSTEM FOR REWINDER UNIT 3) PACKING TABLE & PNEUMATIC ELEVATOR 2. DOUBLE EMBOSSING UNIT WORKING WIDTH: 2750mm RUBBER ROLL X 2 PCS STEEL ROLL X 2 PCS 3. PERFORATION EQUIPMENT: WORKING WIDTH: 2750mm PERFORATION LENGTH: 100mm 4. TRIM BLOWER WITHIN LINE HOSE 7.5 HP +TRIM SLITTER KNIFE 5. SPARE PARTS FOR BELT AND PERFORATION KNIFE 6. SPARE PARTS FOR ELECTRICAL PARTS 9. UL STANDARD WORK AND CERTIFICATIONS SAFETY STRATEGY 1) SAFETY COVER DEVICE FOR THE TRANSMISSION PART, SAFETY SENSOR INSTALLED FOR SAFETY FENCE 2) INSTALL THE EMERGENCY STOP BUTTON AT PROPER PLACE. EMERGENCY BOX ADOPT WITH YELLOW SURFACE PLATE 3) THE CABINET ADOPT DUST-PROOF DESIGN 4) ADOPT THE ELECTRICAL CONTROL COMPONENTS WITH THE CE MARK. 5) THE TERMINAL BLOCK ALL USE CE COMPLIANCE TERMINAL BLOCKS 6) ALL ELECTRICS OUTSIDE OR INSIDE THE CABINET ARE PROTECTED BY ISOLATOR. 7) INDIVIDUAL BRAKER、CONTACTOR AND OVERLOAD PROTECTION CIRCUIT FOR EACH MOTOR AND DRIVES 8) OVER-CURRENT PROTECTION FOR THE CONTROL CIRCUIT 9) ALL WIRING ARE MARKED WITH NUMBER FOR EASY DIAGNOSTIC 10) ADOPT THE JUNCTION BOX TO CONNECT THE SENSORING DEVICE WITH THE CONTROL CABINET, FOR EASY MAINTENANCE 11) PLC PROGRAM WITH PASSWORD PROTECT TO PREVENT UNAUTHORIZED EMPLOYEE TO MODIFY THE PROGRAM. MAIN COMPONENTS SPECIFICATIONS 1. ELECTRICAL CONTROL DEVICE 1) PLC: MITSUBISHI FX3U SERIES 2) AC MOTOR DRIVE: MITSUBISHI, FUJI, JPS OR THE OTHER EQUIVALENT SUPPLIER 3) MAIN BREAKER, MAINLY WITH MOELLER, SIEMENS (GERMANY), TELEMECANIQUE (FRANCE) 4) MOTOR BREAKERS, MAGNETIC CONTACTORS, MAINLY WITH MOELLER, SIEMENS (GERMANY)、 5) TELEMECANIQUE (FRANCE) 6) PUSH BUTTONS: THE M22 SERIES OF MOELLER (GERMANY) 7) RELAY: MAINLY WITH THE FIN SERIES OF FINDER (FRANCE) 8) TERMINAL BLOCKS: ADOPTS WITH ENTRELEC(FRANCE) MA SERIES, CE COMPLIANCE 9) TERMINAL BLOCKS 10) MAIN SPEED SETTING: WITH OR WITHOUT GEARING TRIMMING POTENTIAL METER 11) PHOTO SENSOR: MAINLY WITH BANNER (USA), SICK (GERMANY), OMRON (JAPAN) 12) PROXIMATE SENSOR, LIMIT SWITCH: MAINLY WITH OMRON (JAPAN) 13) SAFETY DOOR SENSOR: MAINLY WITH OMRON (JAPAN) AND TELEMECANIQUE (FRANCE) 2. PNEUMATIC SYSTEM 1) PNEUMATIC CONTROL SYSTEM: FESTO (GERMANY) 2) AIR CYLINDER: TAIWAN 3. MECHANICAL COMPONENTS 1) BEARIN: MAINLY WITH SKF AND TOP 5 JAPANESE VENDOR 2) PILLOW: MAINLY WITH THE TOP 5 JAPANESE VENDOR 4. COLOR 1) MACHINE: WHITE 2) NSAFETY FENCE: YELLOW 3) EMERGENCY STOP: RED QUANTITY: 1