TT-4315 CHROMOJET PRINTING MACHINE, WIDTH 4200mm, YEAR 2018

REFERENCE NUMBER: TT-4315 CHROMOJET PRINTING MACHINE, WIDTH 4200mm, YEAR 2018 CHROMOJET PRINTING MACHINE YEAR 2018 CHR800 16X512 AND SAMPLING EQUIPMENT FULL LINE, ENTRY, STEAMER, WASHER, DRYER, ROLL UP FULL AUTOMATIC DYE KITCHEN CARPET WIDTH: 2000 TO 4200mm CARPET PILE WEIGHT: 300 TO 2500 G/M² CARPET HEIGHT: 3mm TO 20mm VOLTAGE 380 VOLTS / 3 PHASES / 50 CYCLES; +/- 5% NUMBER OF COLORS: 16 JETS PER COLOR: 512 TYPE HSV800 RESOLUTION: 38, 50 OR 76,2 NOZZLE TYPE: 250µ CARPET MATERIAL: NYLON, WOOL AND MODIFIED POLYESTER PRINTING SPEED: IS BASED ON A HEAD SPEED OF 70% UP TO 90% AND A PRINT WIDTH OF 4,2M 76 DPI 1.1 TO 1.4 M/MIN 50 DPI 1.7 TO 2 M/MIN 38 DPI 2.1 TO 2.5 M/MIN THE MACHINE WOULD HAVE THE POSSIBILITY OF RUNNING IN DOUBLE SPEED, WHICH WOULD GIVE ABOUT 80% ADDITIONAL SPEED TO THE ABOVE MENTIONED SINGLE SPEEDS. THE COLOR RANGE IN PROCESS COLOR PRINTING WITH 8 COLORS IS LIMITED. THE MACHINE HAS THE POSSIBILITY OF RUNNING IN DOUBLE SPEED IN PROCESS COLOR PRINTING WITH 8 COLORS. 1. CHROMOJET PRINTER HSV800 4000 16C X 512 SCOPE OF DELIVERY: MACHINE FRAME: SOLID STEEL FRAME FABRIC TRANSPORT: EXTRA STRONG ROLLERS FOR PRECISE BELT TRACKING AUTOMATIC BELT GUIDING UNIT WITH MOTOR DRIVEN GUIDING ROLLER, ANALOG SENSOR AND LIMIT SWITCHES CONVEYOR BELT WITH PINS HIGH PRECISION GEARBOX WITH SERVO DRIVE STAINLESS STEEL BAR ON ENTRY SIDE, DRIVEN EXTRACTION ROLLER ON EXIT SIDE LOOP CONTROL AT ENTRY AND EXIT: TO SYNCHRONIZE ENTRY AND STEAMER ENTRY SIDE: LOOP CONTROL WITH GUIDING ROLLER AND LASER DISTANCE SENSOR EXIT SIDE: LOOP CONTROL WITH LASER DISTANCE SENSOR AND LIMIT SWITCH (PHOTO CELL) PRINTING CARRIAGE: FRAME WITH SOLID ALUMINUM PROFILE STRUCTURE COLOR SUPPLY UNIT FOR 16 COLORS WITH PRESSURE CONTROL 2 ENERGY CHAINS FOR COLOR SUPPLY HOSES AND CABLES HIGH PRECISION GUIDING RAILS WITH SPECIAL COATING SERVO DRIVE WITH PARALLEL SHAFT AND 2 PRECISIONS GEARWHEELS RACK AND PINION DRIVE WITH HELICAL GEARING HEIGHT ADJUSTMENT: 0 TO 50 MM OF COMPLETE BRIDGE 4 LIFTING GEARS DRIVEN BY AC MOTOR. HEIGHT DETECTION WITH ANALOG SENSOR AUTOMATIC WASHING SYSTEM: FOR PUMPS, FILTERS AND COLOR SUPPLY SYSTEM ON THE PRINT HEAD. AIR INJECTION FOR BETTER CLEANING RESULT COLOR SUPPLY: 16 PUMPS EACH WITH ONE MAIN FILTER, 16 SET PRE-FILTER AND 16 SET LAST CHANCE FILTER MACHINE CONTROL: PC WITH "SOFT PLC" SOFTWARE: FOR PLC AND DATA TRANSFER CABLES: ALL CABLES ARE INCLUDED FROM CABINETS TO THE MACHINES 2. SUPRAPRESS PENETRATING AND PRESSING STATION - 2 PRESS ROLLERS (ONE WITH RUBBER COATING AND ONE WITH CHROMIUM COATING) - GAP ADJUSTMENT WITH 0.1mm STEPS. - GAP CAN BE OPENED TO MAX. 50mm DURING CONTINUOUS OPERATION OF THE LINE - 3-STAGE ROLLER CLEANING AND DRYING - INVERTER CONTROLLED DRIVE - SYNCHRONIZATION BETWEEN CHROMOJET PRINTER AND SUPRAPRESS AS WELL AS STEAMER INLET. - THE USER WILL HAVE AN OPTION NOT TO USE PRESSING STATION IN ALL TIMES. - THE MAXIMUM OPENING OF THE PRESS STATION WILL BE 50mm ELECTRICAL CONTROL UNIT DRIVE SYSTEM FOR SUPRAPRESS SYNCHRONISATION AND ADAPTION TO THE PROGRAM ALL SPECIAL CABLES ARE INCLUDED 3. CHROMOJET SAMPLE PRINTER CHR800 1200 16 X 32 TECHNICAL DATA: PRINTING WIDTH: 1200mm X 1200mm NUMBER OF JETS PER COLOR: 32 NUMBER OF COLORS: 16 PATTERN RESOLUTION: 38, 50 OR 76 DPI CARPET PILE WEIGHT: 300 TO 2500G/M2 CARPET PILE HEIGHT: 3 TO 20mm NOZZLE: 250µ THE FINAL RESOLUTION USED AS WELL AS THE OUTCOME OF THE PRINT ARE DEPENDING ON THE CARPET STRUCTURE, ESPECIALLY THE PILE WEIGHT AND PILE HEIGHT AND THE ADJUSTMENTS ON THE MACHINE AS WELL AS THE COLOR PASTE MUST BE ADJUSTED ACCORDINGLY. INSTALLATION OF THE SAMPLE PRINTER AND SAMPLE SUPRA PRESS STATION WILL BE INCLUDED. SCOPE OF SUPPLY: - FRAMEWORK WITH PRINT-HEAD AND TRANSPORT TABLE - COLOR SUPPLY UNIT WITH 16 TANKS - CONTROL UNIT INCL. SOFT-AND HARDWARE - INDUSTRIAL PC - COLOR GROUPS WILL BE ARRANGED IN THE SAME WAY AS THE PRODUCTION PRINTER! - PRINT RESULT OF SAMPLE HEAD WILL BE ALMOST LIKE THE PRODUCTION PRINT HEAD. IT WILL NOT BE 100% SAME AS THE AFTER TREATMENT PROCESS IS DIFFERENT AS WELL AS THE TIMING ETC. - THE SPEED OF SAMPLING WILL BE 0.18 TO 0.22 M /MIN. IN 50 DPI MODE 4. SUPRAPRESS SAMPLE PENETRATING AND PRESSING STATION PRESSSTATION WITH 1200mm WIDTH (4’) - 2 PRESS ROLLERS - MANUAL GAP ADJUSTMENT - STAGE ROLLER CLEANING AND DRYING - INVERTER CONTROLLED DRIVE QUANTITY: 1