TT-5081 PRODUCTION LINE FOR NEEDLE-PUNCHED NONWOVEN FABRICS, 50 Hz, YEAR 1992 TO 2024

REFERENCE NUMBER: TT-5081 PRODUCTION LINE FOR NEEDLE-PUNCHED NONWOVEN FABRICS, 50 Hz, YEAR 1992 TO 2024 THE FOLLOWING WEIGHTS OF NONWOVEN FABRIC CAN BE MADE ON THE PRODUCTION LINE: 200 TO 1000 G/M² LINE EFFICIENCY: 300 KG/H FINAL WORKING WIDTH OF THE NONWOVEN FABRIC: 2500mm POWER SUPPLY: 400 V, 50 Hz, INSTALLED POWER: 62 KW THE LINE IS EQUIPPED WITH MODERN CONTROL IN CONTROL CABINETS NECESSARY AREA FOR THE ROPE: LENGTH: 17000mm, WIDTH: 10000mm, CONSISTING OF: ITEM 001 MIXING CHAMBER WITH A PNEUMATIC SCALE ON STRAIN GAUGES FOR PORTIONING THE LOAD ONTO THE CARDING MACHINE, BRAND: TEMAFA, YEAR: 1999, MECHANICAL AND ELECTRICAL MODERNIZATION IN 2021 AND 2024, LENGTH: 5000mm, WIDTH: 3000mm, QUANTITY: 1 ITEM 002 ONE DOFFER CARDING MACHINE, BRAND: SPINNBAU, MECHANICAL AND ELECTRICAL MODERNIZATION IN 2023 TO 2024, WORKING WIDTH: 2200mm QUANTITY: 1 ITEM 003 CROSS-LAPPER, BRAND: HERGETH, MECHANICAL AND ELECTRICAL MODERNIZATION IN 2021, INPUT: 2500mm, OUTPUT: 3000mm, UP TO 50 M/MIN QUANTITY: 1 ITEM 004 NONWOVEN NEEDLE LOOM, BRAND: AUTOMATEX, ITALY, YEAR 2008, WITH NEW CBF; TOTAL MODERNIZED MECHANICALLY AND ELECTRICALLY IN YEAR 2023 TO 2024, SERIAL NUMBER: 1585/C WORKING WIDTH: 2700mm, NEEDLING FROM TOP STROKE: 60mm, 1 X 5000 NEEDLES/M INSTALLED POWER: 31 KW WORKING SPEED: UP TO 1100 RPM FOR THE MACHINE ARE: 2 NEEDLE BOARDS IN THE MACHINE, 2 SPARE NEEDLE BOARDS, THE MACHINE HAVE BEEN RENEWED RECENTLY: NEW BEARINGS, NEW SLEEVES, NEW OIL SEALS (SIMMERRING) ETC. EXCELLENT TECHNICAL SOLUTIONS - AS SIMPLE AS POSSIBLE, THUS VERY EFFECTIVE, DURABLE/ALMOST FLAWLESS 1 CONTROL CABINET ON THE CURRENT LEVEL OF TECHNOLOGY. QUANTITY: 1 ITEM 005 LONGITUDINAL CUTTING AND WINDING MACHINE FOR NON-WOVEN FABRICS YEAR 2023, WORKING WIDTH: 2500mm, CONSISTING OF: ROUND LONGITUDINAL CUTTING KNIVES - 5 PCS., EACH KNIFE, MADE OF SPECIAL HARDENED MACHINE STEEL, EACH KNIFE CAN BE MOVED SEPARATELY TO SET THE DESIRED CUTTING WIDTH OF MATERIAL STRANDS/RIBBONS, PNEUMATIC PRESSURE USING PNEUMATIC ACTUATORS FOR EACH KNIFE SEPARATELY HARDENED PRESSURE ROLLER UNDER THE KNIVES. ON REQUEST, NEW KNIVES CAN BE ADDED AND THE WORKING WIDTH OF THE ENTIRE LONGITUDINAL CUTTING DEVICE CAN BE INCREASED OR DECREASED AS DESIRED. THE CUTTING MACHINE'S DRIVE IS SYNCHRONIZED WITH THE END WINDER OF THE PRODUCTION LINE VIA A CHAIN AND GEAR. QUANTITY: 1 ADDITIONS TO THE LINE ARE FOR SALE: ITEM 006 NEEDLE LOOM WITH NEW CBF, BRAND: ANTONIO GUASCH GRANO S.A., SPAIN YEAR 1992, COMPLETELY RENOVATED MECHANICALLY AND ELECTRONICALLY IN YEAR 2024, APRIL, WORKING WIDTH: 2600mm, NEEDLING FROM TOP STROKE: 60mm, 1 X 3000 NEEDLES/M POWER SUPPLY: 400 V, 50 Hz, INSTALLED POWER: 11 KW; WORKING SPEED: UP TO 800 RPM CONTROLLED BY INVERTER, INPUT BELT CONVEYOR, NEEDLE PLATES LEADED BY SLEEVES (VERY PRACTICAL SOLUTION), VERY SIMPLE (MEANS: TROUBLE-FREE) ECCENTRIC MOTION TRANSMISSION, SPARE NEEDLE PLATE. THE MACHINE HAS BEEN RENEWED RECENTLY: NEW BEARINGS, NEW SLEEVES NEW SHAFT, NEW PLATES ETC., PRACTICALLY THE ENTIRE MACHINE IS NEW, ONLY THE FRAME IS OLD. JUST SWITCH ON AND WORK. MACHINES OF THE TYPE ARE HIGHLY PRAISED BY OUR CUSTOMERS EXCELLENT TECHNICAL SOLUTIONS - AS SIMPLE AS POSSIBLE, THUS VERY EFFECTIVE, DURABLE ALMOST FLAWLESS IN COMPARISON WITH SOLUTIONS OF OTHER EUROPEAN MANUFACTURERS. QUANTITY: 1