YY-2144 MULTIFUNCTION COATING HEAD, 1650mm BY KNIFE OR 1750mm BY ENGRAVED ROLLER

REFERENCE NUMBER: YY-2144 MULTIFUNCTION COATING HEAD, 1650mm BY KNIFE OR 1750mm BY ENGRAVED ROLLER DETAILS: 1. COMBINED COATING MACHINE FOR ONE FINISHING AND COATING NOMINAL WIDTH 1800mm. MAXIMUM COATING WIDTH: BY KNIFE 1650mm, BY ENGRAVED ROLLER 1750mm WITH FOLLOWING WORKING MODES POSSIBILITIES: - REVERSE ROLL - SYNCHRO ROLL - REVERSE ROLL "ON AIR" - SYNCHRO ROLL "ON AIR" - BLADE "ON AIR" - BLADE ON COUNTER- ROLLER COMPOSED OF: - WELDED STEEL FRAMEWORK WITH HIGH; - ORSION RIGIDITY; - RUBBERIZED COUNTER-ROLLER DIAMETER 400mm, OIL AND SOLVENTS RESISTANT; - HARDNESS 85 SHORE A, MAX ECCENTRICITY TOLERANCE ±1/100mm; - A/C GEARMOTOR TO DRIVE THE COUNTER ROLLER; - ROLLER CHANGING DEVICE (BRIDGE), ARRANGED TO MOUNT TWO ENGRAVED ROLLERS AND ONE COATING KNIFE; - PNEUMATIC LIFTING OF CHANGING DEVICE (BRIDGE); - MANUAL ROTATION OF THE ROLLER CHANGING DEVICE; - MOTORIZED MICROMETRIC ADJUSTMENT OF COATING THICKNESS, INDEPENDENT RIGHT/LEFT OR IN TANDEM, WITH DIGITAL DISPLAY ON CONTROL PANEL, BY TWO JACKS; - COATING SIDE LIMITERS, MANUALLY ADJUSTABLE EITHER SINGLE OR TANDEM; - FEEDING THROUGH IN FRONT OF THE COATING KNIFE; - A/C GEARMOTOR TO DRIVE THE ENGRAVED ROLLER; - TWO COLOUR DOCTOR BLADES (SYNCHRO / REVERSE) WITH PNEUMATIC OPENING AND CLOSING FOR A SMOOTHER MOVEMENT OF THE BLADE TOWARDS THE ROLLER, WITH OSCILLATING MOVEMENT; - ENTRY IDLER ROLLER, THE UPPER ONE LIFTABLE BY PNEUMATIC PISTONS FOR "ON AIR" COATING; - PIPING FOR THE WASHING OF THE ENGRAVED ROLLER; - TWO SIDE GUTTERS IN STAINLESS-STEEL WITH TEFLON COATING, WITH SOLVENT RESISTANT RUBBER PIPE FOR WASTEWATER OR CHEMICALS COLLECTION AND RECIRCULATION; - WASTEWATER RECOVERY BASIN, WITH DRAIN, UNDER THE COUNTER-ROLLER; - MANUAL SEAM JUMPER; - VARIABLE SPEED FROM 2,5 TO 50 M/MIN FOR THE COUNTER-ROLLER AND FROM 2,5 TO 99 M/MIN FOR THE ENGRAVED ROLLER; - PIVOTING CONTROL PANEL WITH DIGITAL SCREEN, MOUNTED ON THE MACHINE FRAME, TO CONTROL AND SET THE MACHINE FUNCTIONS; - MAIN ELECTRICAL PANEL EQUIPPED WITH PLC AND INVERTERS, PROTECTION IP54, MOUNTED INSIDE THE LEFT HAND MACHINE SHOULDER; - SET OF MACHINE ACCESSORIES AND INSTRUCTION & MAINTENANCE MANUAL. A. MACHINE BUILT ACCORDING TO OF CE REGULATIONS. MACHINE INCLUDING ONE COATING KNIFE PROFILE * QUANTITY: 1 B. POSITIVE CHROMED STEEL ROLLER FOR REVERSE ROTATION - ENGRAVING TO BE DEFINED. QUANTITY: 2 C. PNEUMATIC RESIN DISTRIBUTOR (TO – FRO) TO DELIVER THE CHEMICAL ACROSS THE WHOLE WIDTH. QUANTITY: 1 D. PNEUMATIC PISTON PUMP, MAX VISCOSITY 35.000 CPSA. QUANTITY: 1 E. LEVEL CHECK PROBE FOR THE AUTOMATIC START-STOP OF PUMP. QUANTITY: 1 F. AUTOMATIC SEAM JUMPER WITH SENSOR, TO LIFT THE BLADE AT SEAM PASSAGE. QUANTITY: 1 MAIN EXCLUSIONS:  ALL THE COMPRESSED AIR CONNECTIONS, INCLUDING THE MATERIALS, FROM THE COMPRESSOR OR MAIN LINE TO THE MACHINES.  ALL WATER CONNECTION, INCLUDING MATERIALS, TO THE MACHINES AND TO THE DRAINAGE  ALL ELECTRICAL CONNECTION, INCLUDING THE MATERIALS, FROM THE MAIN LINE TO THE MAIN ELECTRICAL PANEL OF THE LINE.  THE WORK AND MATERIALS FOR THE ELECTRICAL SYSTEM FROM MAIN PANEL TO THE VARIOUS MACHINES OF THE LINE (INCLUDING CABLE PASSES, WIRES, CABLES, AND SHEATHS).  ALL THE BRICKWORKS OUR FOUNDATIONS.  THE LIFTERS TO UNLOAD AND TO POSITION THE MACHINES.  THE RAW MATERIALS AND WORKERS TO HELP THE OUR TECHNICIANS DURING START UP AND FUNCTIONAL CONTROL.  ALL WHICH ISN'T EXPLICITLY DESCRIBED IN THIS QUOTATION.