YY-2229 PP PE FILMS AGGLOMERATOR, VOLUME 500L

REFERENCE NUMBER: YY-2229 PP PE FILMS AGGLOMERATOR, VOLUME 500L DETAILS: I. APPLICATION RANGE: AGGLOMERATOR IS USED FOR PROCESS A WASTE OF THERMOPLASTIC FILM WITH A THICKNESS OF LESS THAN 2 MILLIMETERS; PRODUCTS WHICH CAN BE SOFT PVC, HDPE, LDP, LLDPE (HIGH OR LOW PRESSURE POLYETHYLENE), PS (POLYSTYRENE), PP (POLYPROPYLENE) AND OTHER THERMOPLASTICS WASTE PRODUCTS, AND ALSO FOR EPS (EXPANDED POLYSTYRENE) WASTE PRODUCTS GRANULATED. II.WORKING PRINCIPLE: AFTER THE WASTE PLASTIC IS FED INTO THE MACHINE CHAMBER, THE HIGH-SPEED ROTATING BLADE AND THE FIXED BLADE SHEAR THE MATERIALS BY ROTATION, SO THAT THE MATERIAL WILL BE CUT INTO PIECES, CHOP THE MATERIAL UNDER CENTRIFUGAL FORCE ROTATION OF THE CUTTER, ALONG THE CHAMBER WALL FLOW WHILE UNDER THE EFFECT OF PULP MATERIAL AND THAT FORCES IN AN UP AND DOWN MOVEMENT FROM THE CENTER OF THE CHAMBER IN ALL DIRECTIONS AROUND OF THE CHAMBER. DUE TO THE FRICTION WITHIN THE MATERIAL ITSELF AND THE HIGH SPEED AGAINST THE CHAMBER WALL AND THE BLADE, A LOT OF FRICTIONAL HEAT WILL BE PRODUCED, THE MATERIAL TEMPERATURE RISES RAPIDLY TO REACH SEMI-PLASTICIZED STATE. ADHERING TO EACH OTHER INTO SMALL PARTICLES. METERED WATER IS ADDED BEFORE THE MATERIAL TO BE AGGLOMERATED, ALL PREVIOUSLY PREPARED MATERIAL SPRAYED WITH COLD WATER ON THE HOT MATERIALS, EVAPORATES QUICKLY, HEAT IS TAKEN AWAY FROM THE MATERIAL SURFACE, SO THAT RAPID COOLING TO PREVENTS CAKING OF THE MATERIAL SURFACE, THEN BY ROTATION OF THE BLADE TO BLADE AND THE FIXED CRUSHING ACTION, PLASTIC RAW MATERIALS WILL BE CHOPPED TO A PARTICLE (PELLETS SIZES ARE OF IRREGULAR SIZES). IN THE COURSE OF SHREDDING, A SUITABLE PIGMENT CAN ALSO BE ADDED TO COLOR THE RAW MATERIALS. THIS MACHINE CAN PRODUCES PELLETS FOR EXTRUSION MACHINES, INJECTION MACHINES, ETC.; WITH THE MORE STRINGENT REQUIREMENTS, MATERIALS CAN BE PELLETIZED AND THEN BE ADDED INTO AN EXTRUDER. QUANTITY: 1