Search results for: 'Brushes'

REFERENCE NUMBER: K-6777

DANTI PAOLO BRUSHING MACHINE YEAR: 2012 WIDTH: 2400mm - 6 BRUSHES

 

DANTI PAOLO BRUSHING MACHINE ITALY

MODEL: S 1000

YEAR: 2012

WIDTH: 2400mm

6 BRUSHES (1 DIAMOND BRUSH)

MACHINE NEVER USED MUCH

LOOKS BRAND NEW

 

QUANTITY; 1

Learn More

REFERENCE NUMBER: M-5992 (880DRCFXX7) L MARIO CROSTA BRUSHING MACHINE WITH 6 BRUSHES WIDTH 2400mm BRUSHING MACHINE MAKE: MARIO CROSTA WIDTH: 2400mm MACHINE EQUIPPED WITH 6 BRUSHES ENTRY UNIT WITH SCREEN CONTROL SUCTION WITH DUST RECOVERY SYSTEM MACHINE IS IN GOOD CONDITION QUANTITY AVAILABLE: 1 Learn More

TT-4911 DILO DI-LOUR 25 MACHINE, WORKING WIDTH 2500mm, YEAR 1987 DILO DI-LOUR 25 MACHINE RECENTLY RECONDITIONED AND UPGRADED WITH A NEW ELECTRICAL CONTROLS SYSTEM WORKING WIDTH 2500mm YEAR BUILT 1987 WE RECONDITIONED AND UPGRADED IN AUGUST 2021 MAXIMUM DAYLIGHT: 12.5” (WITHOUT SAFETY GUARDING ON INLET) NEEDLE BOARDS: 2 NEEDLE BOARDS AND 1 DUMMY BOARD NEEDLE POPULATION: 8000 NEEDLES PER METER MAIN MOTOR: 34.5 KW (460 V); 30 KW (400 V) ESTIMATED NUMBER OF BRUSHES: 1640 BRUSH BRISTLE HEIGHT: 20mm MAXIMUM ECCENTRIC RPM: 980 MAXIMUM BRUSH CONVEYOR SPEED: 5.6 METERS PER MINUTE MAXIMUM DRAW-OFF ROLLER SPEED: 6 METERS PER MINUTE QUANTITY: 1 Learn More

REFERENCE NUMBER: J-2640
DYEING AND FINISHING PLANT FOR SALE

ITEM 001
THIES SAMPLE DYEING MACHINE
MODEL: MINISOFT SAMPLE
CAPACITY: 50 KGS
YEAR: 1999
MICROPROCESSOR CONTROLLED
VOLTAGE: 460 VOLTS, 3-PHASE, 60 Hz
SINGLE ADD TANK WITH MIXER
HEAT EXCHANGER
ALL PUMPS AND MOTORS
LOADING REEL AND FABRIC EXIT PLAITOR
QUANTITY: 1

ITEM 002
THIES DYEING MACHINE
MODEL ECOSOFT PLUS
3 PORT SPLIT/SPLIT
CAPACITY: 900 KGS
YEAR: 1999
MICROPROCESSOR CONTROLLED
VOLTAGE: 460 VOLTS, 3-PHASE, 60 Hz
SINGLE ADD TANK WITH MIXER
HEAT EXCHANGER
ALL PUMPS AND MOTORS
LOADING REEL AND FABRIC EXIT PLAITOR
QUANTITY: 1

ITEM 003
THIES DYEING MACHINE
MODEL: ECOSOFT PLUS
2 PORT SPLIT/SPLIT
CAPACITY: 600 KGS
YEAR: 1999
MICROPROCESSOR CONTROL
VOLTAGE: 460 VOLTS, 3-PHASE, 60 Hz
SINGLE ADD TANK WITH MIXER
HEAT EXCHANGER
ALL PUMPS AND MOTORS
LOADING REEL AND FABRIC EXIT PLAITOR
QUANTITY: 1

ITEM 004
THIES DYEING MACHINE
MODEL ECOSOFT PLUS
1 PORT SPLIT/SPLIT
CAPACITY: 300 KGS
YEAR: 1999
MICROPROCESSOR CONTROLLED
VOLTAGE: A460 VOLTS, 3-PHASE, 60 Hz
SINGLE ADD TANK WITH MIXER
HEAT EXCHANGER
ALL PUMPS AND MOTORS
LOADING REEL AND FABRIC EXIT PLAITOR
QUANTITY: 1

ITEM 005
GASTON COUNTY DYEING MACHINE
MODEL: AQUAFLOW
2 PORT
CAPACITY; 250 KGS
YEAR: 1987
MICROPROCESSOR CONTROLLED
VOLTAGE: 460 VOLTS, 3-PHASE, 60 Hz
SINGLE ADD TANK WITH MIXER
HEAT EXCHANGER
ALL PUMPS AND MOTORS
LOADING AND UNLOADING REEL
QUANTITY: 1

ITEM 006
THIES DYEING MACHINE
MODEL: SOFT TRD
2 TUBE
CAPACITY: 700 KGS
YEAR: 1999
MICROPROCESSOR CONTROLLED
VOLTAGE: 460 VOLTS, 3-PHASE, 60 Hz
SINGLE ADD TANK WITH MIXER
HEAT EXCHANGER
ALL PUMPS AND MOTORS
LOADING REEL AND FABRIC EXIT PLAITOR
QUANTITY: 1

ITEM 007 (also our J-2647)
LAFER OPEN WIDTH COMPACTOR MACHINE
MODEL: KSA 500 2400/2200
YEAR: 1998
LAFER TEXEN CONTROLS
VOLTAGE: 480 VOLTS, 3-PHASE, 60 Hz
COMPOSED OF:
• TENSION BAR ENTRY TO LATTICE ROLL GUIDER
• OPERATOR’S PLATFORM
• PUP TENTER WITH KNIT ENTRY, VERTICAL PIN CHAIN, WITH PLATE GUIDES, RAIL OPENING, PINNING BRUSHES, PINS ONLY, WITH SUPPORT SECTION FOR THE FABRIC IN THE CENTER, AT 10’ THERE IS A STEAMING SECTION, TOTAL LENGTH OF THE TENTER IS 30’, WITH AUTOMATIC LUBRICATION FOR THE CHAIN
• KSA 500 COMPACTOR BENCH WITH TEXEN CONTROLS
• TENSIONLESS FABRIC CONVEYOR
• PLAITOR AND FABRIC SCRAY WITH OPTICAL LOAD SENSOR
• INLINE INSPECTION BATCHER MACHINE, WITHH A BACK LIGHTED BOARD, MANUAL CUT
• SCALE TO WEIGHT THE FABRIC
QUANTITY: 1

ITEM 008 (also our J-2648)
SANTEX TUBULAR 4-ROLL EXTRACTION PAD
MODEL: SANTASTRETCH PLUS 140
YEAR: 1998
COMPOSED OF TURNTABLE, DETWISTER, TUBULAR 4-ROLL PAD WITH WET SPREADERS, PLAITOR
WITH ADDITION TANKS FOR SOFTENER
REEL FABRIC PLAITOR EXIT
VOLTAGE: 460 VOLTS, 3-PHASE, 60 Hz
QUANTITY: 1

ITEM 009
SANTEX CONVEYOR DRYER FOR OPEN WIDTH AND TUBULAR FABRIC
MODEL: SANTASHRINK 4/5240
YEAR: 1998
SANTEX CONTROLS
VOLTAGE: 460 VOLTS, 3-PHASE, 60 Hz
COMPOSED OF:
• TENSION BAR ENTRY TO LATTICE ROLL GUIDER TO
• (2) SANTEX 2-ROLL PADS, RUBBER OVER RUBBER, 102” WIDE x 12” DIAMETER, STAINLESS STEEL PAN, 10-TON PAD, SWING-AWAY PAN, TENSION BAR WITH 2 STAINLESS STEEL MIXING TANKS, 75 GALLONS EACH
• DRIVEN SCROLL ROLLS WITH EDGE GUIDE CONTROL, WIDTH 95”
• OPERATOR’S PLATFORM
• PUP TENTER WITH KNIT ENTRY 45°, YEAR 1998, VERTICAL PIN CHAIN, 30’ LONG WITH TANDEMATIC PLATE GUIDES, RAIL GUIDES, PINNING BRUSHES, GUIDE SUPPORT FOR THE FABRIC, FABRIC CONVEYOR TO ENTER BOTH TUBULAR OR OPEN WIDTH FABRIC TO
• CONVEYOR DRYER 100” WIDE, 5 ZONES, 3-PASS WITH MAXON BURNERS, 5 CIRCULATING FANS TO CONVEYOR BELT TO PLAITOR
• ALL MOTORS AND SANTEX CONTROLS AND MONITORS
QUANTITY: 1

ITEM 010
SANTEX AG TUBULAR COMPACTOR MACHINE
MODEL: SANTASPREAD 140
YEAR: 1998
SANTEX CONTROLS
VOLTAGE: 460 VOLTS, 3-PHASE, 60 Hz
COMPOSED OF:
• TENSIONS BAR ENTRY
• OPERATOR’S PLATFORM
• TENSION DEVICE
• DRIVEN SPREADER BARS
• STEAMING DEVICE
• TUBULAR COMPACTING BENCH
• FELT BLANKET ONTO THE CONVEYOR BELT
• PRECISION PLAITOR
• TABELTOP ELECTRONIC SCALE
QUANTITY: 1

ITEM 011
COMET NAPPER
MODEL: PEGSO-X4
YEAR: 1998
VOLTAGE: 480 VOLTS, 3-PHASE, 60 Hz
24 ROLLS WITH TURNING BARS FOR TUBULAR 90” WIDE
XYCOM CONTROLS
12-BAG COLLECTION SYSTEM AND PLAITOR
YEAR: 1996
QUANTITY: 1

ITEM 012
STENTEX TENTER FRAME
MODEL: STENTOTHERM 3300
YEAR: 1999
STENTEX CONTROLS
VOLTAGE: 480 VOLTS, 3-PHASE, 60 Hz
COMPOSED OF:
• TENSION ENTRY TO TEXT-STAR TYPE GUIDER TO 2 ROLL PAD
• ADDITION TANK TOP SCRAY PAD TO TEXT-STAR TYPE GUIDER
• TWO ROLL PAD R/R 10 TON
• OPERATOR’S PLATFORM
• WORKING WIDTH 1800mm
• HORIZONTAL PIN CHAIN, KNIT ENTRY
• TANDEMATIC SPLITLEVEL DECURLERS
• OVERFEED
• PINNING BRUSHES
• STEAM BOX
• RAIL GUIDERS, 20 FEET ENTRY, 8 ZONES
• 80 FEET HOUSING
• SCREEN MONITORS
• GAS FIRED, MAXON OVEPAK 408 BURNERS
• HONEYWELL CONTROLS
• 3 FEET COOLING ZONE
• 2 COOLING CANS, SELVEDGE TRIMMERS
• PLIATOR, SCRAY
• ZONE IN LINE INSPECTION BATCHER
QUANTITY: 1

ITEM 013
ZIMMER ROTARY SCREEN PRINTING MACHINE
MODEL: R92-S153
YEAR: 1993
COMPOSED OF:
• TENSION BAR SKY ENTRY
• SCRAY
• CORINO BRUSH
• CORINO PRINT GUIDER
• ZIMMER PRINTER, 8 COLOR, 86” BLANEKT
• PRINT CONVEYOR DRYER, 30’ LONG, 3-ZONE, GAS FIRED
VOLTAGE: 460 VOLTS, 3-PHASE, 60 Hz
QUANTITY: 1

ITEM 014
SAFETY SWITCH BULLET NOSE SLITTER
MODEL: CUTTING
WITH REEL FABRIC PLIATOR
VOLTAGE: 460 VOLTS, 3-PHASE, 60 Hz
QUANTITY: 1

Learn More

REFERENCE NUMBER: M-4104 (1010WWYSXX9) L MONFORTS MONTEX HORIZONTAL TENTER YEAR 1994 WIDTH 2000mm – GAS - 7 ZONES - PIN MONFORTS TENTER HORIZONTAL MODEL MONTEX –7F/14GK WIDTH 2000mm E & L 2-FINGER UNCURLERS W/ELECTRIC EYE MOTION PINNING BRUSHES, OVERFEED WITH 20 FOOT ENTRY YEAR 1994 MODEL GK14 HOUSING QUANTITY AVAILABLE: 1 Learn More

TT-1903 COMPLETE FLOCKING LINE, WORKING WIDTH 3200mm, YEAR 2002 COMPLETE FLOCKING LINE WORKING WIDTH 3200mm QUANTITY: 1 Learn More

TT-7398 LAFER ULTRASOFT BRUSHING MACHINE, WORKING WIDTH 2000mm, YEAR 2003 1. LAFER ULTRASOFT BRUSHING MACHINE 2. BRUSHTYPE: CARBON 3. NO. OF BRUSHES: 6 4. MAX WORKING WIDTH: 2000mm 5. EL. TENSION: 400 V 50 Hz 3 PHASE 6. INSTALLED POT. 598 KW 7. YEAR: 2003 QUANTITY: 1 Learn More

TT-7205 UNITECH BRUSHING MACHINE, WORKING WIDTH 3000mm, YEAR 2008 EXCELLENT CONDITION QUANTITY: 1 Learn More

TT-2846 TEXIMA SINGEING MACHINE, WIDTH 2000mm, YEAR 1993 WITH FABRIC TENSIONER TEXIMA SINGEING MACHINE YEAR 1993 WIDTH 2000mm QUANTITY: 1 Learn More

REFERENCE NUMBER: T-6928 OSTHOFF SINGEING MACHINE, WIDTH 2400mm, YEAR 1992 OSTHOFF SINGEING MACHINE TYPE PK90 YEAR 1992 ROLLER WIDTH: 2400mm FABRIC INFEED WITH E+L KF10 BRUSHING TYPE VP87/1 SINGING WITH TWO BURNERS BRUSHING KLEINEWEFERS/RAMISCH, TYPE VI6, 2 BRUSHES DESIZING, TYPE FO-02/2, YEAR 2006, SQUEEZER BATCHER FILTER QUANTITY: 1 Learn More