Search results for: 'portable air com'

C-3994 BARGEMOUNTED POWER PLANT, CAPACITY 220MW

A. ONCE THROUGH STEAM GENERATOR
B. BARGE
C. CHILLERS
D. AIR COMPRESSOR
E. GAS TURBINE
F. STEAM TURBINE
G. FEEDWATER SYSTEM
H. CLOSED COOLING WATER SYSTEM
I. AUXILIARY COOLING WATER SYSTEM
J. CONDENSATE POLISHING UNIT (CPU)
K. WASTE WATER SYSTEM
L. PLANT ELECTRICAL SYSTEM
M. BLACK START DG SET
N. PLANT CONTROLS AND INSTRUMENTATION
O. PLANT FIRE FIGHTING SYSTEM
P. START UP VACUUM SYSTEM
Q. STEAM TURBINE DEAERATING CONDENSER

QUANTITY: 1 PLANT

Learn More

TT-2014 WARTSILA 9L20 HFO PLANT, 1539 KW EACH 11KV 50Hz 1000 RPM HFO/LFO, YEAR 2009 UNUSED NEW UNITS WARTSILA HFO OIL CUBES 1539 KW EACH VOLTAGE: 11000 VOLTS FREQUENCY: 50Hz 1000 RPM FUEL: HFO/LFO INCLUDING MV/LV SYSTEM LAID INTO TWO 40 FOOT CONTAINERS NOT MADE BY WARTSILA QUANTITY: 4 Learn More

TT-7861 TAURUS 65 GAS TURBINE GENERATOR SET, YEAR 2022, WITH ONLY 300 HOURS 1. WITH ONLY 300 HOURS 2. TAURUS 65 3. 300 HOURS 4. YEAR 2022 5. THE DISMANTLED AND READY FOR DELIVERY 6. TAURUS 65 GAS TURBINE 7. INDUSTRIAL, SINGLE-SHAFT 8. 13 STAGE COMPRESSOR 9. VARIABLE INLET GUIDE VANES AND STATORS QUANTITY: 1 Learn More

REFERENCE NUMBER: M-3867 (99029GYL8UF) –D AUTOMATIC DOWN FILLING MACHINE MODEL 81 QUANTITY AVAILABLE: 1 Learn More

• Air permeable
The mesh openings on two sides and the porous structure allow free air flow and vapor emission from all six sides, effectively inhibiting the growth of molds, bacteria and mites and thus preventing skin itches.

• Stress-relieving and body-fitting
The hardness is moderate to reduce the body stress so that human body can fully relax without feeling any compression, avoiding blocking blood flow. There are 40 supporting points per square centimeter, providing meticulous support and fitting the material to the natural curve of human body.

• Easy-to-wash and fast-dry
The material is made from functional fiber, which neither absorbs moisture nor easily reacts chemically with oil and dirt. Water stays no more than one second on the material, while sweat, dirt, and dust can be washed away easily. Therefore, the surface can be cleaned with minimum effort, preventing the growth of mites and bacteria.

• Eco-friendly and non-toxic 
The pure fabric can be fully recycled upon disposal. The combustion products of sponge are cyanides, which are highly toxic; on the contrary, the products of complete combustion of 3D spacer material are water and carbon dioxide, which are non-toxic and totally safe.

• Rollable and portable. 
With superior rollability, it can be easily carried into and out of an elevator, taken to outdoor activities, or stores easily when the seasons change.

 

CONSTRUCTED OF 100% POLYESTER
FEATURES: AIR-PERMEABLE, WATER-PERMEABLE, ECO-FRIENDLY, NON-TOXIC, 100% RECYCLED, ANTI-STATIC, ANTI-MITE, ELASTIC, FLAME-RETARDANT, ETC.
NET “X” STRUCTURE
FOR UPHOLSTERY, MATTRESS TOPPERS, MATS, SEAT CUSHIONS, ETC. 

NO# NAME LENGTH x WIDTH DIMENSIONS APPROX. INCHES THICKNESS
1 CUSHION 450x450mm 17.7 x 17.7 8 INCHES
2 BABY BED 600x1200mm 23.6 x 47.2 8 INCHES
3 STUDENT BED 1000x2000mm 39.3 x 78.7 8 INCHES
4 1.2 METER BED 1200x2000mm 47.2 x 78.7 8 INCHES
5 1.5 METER BED 1500x2000mm 59 x 78.7 8 INCHES
6 1.8 METER BED 1800x2000mm 70.8 x 78.7 8 INCHES
7 QUEEN BED 1524 x 2032mm 60 x 80 8 INCHES

Learn More

TT-8476 NOVATEC NOVADRIER ND-50 PORTABLE RESIN DRYER – LIKE NEW, YEAR 2008 1. BRAND: NOVATEC 2. MODEL: ND-50 3. CONDITION USED QUANTITY: 1 Learn More

REFERENCE NUMBER: M-2014 AUTOMATIC DOWN FILLING MACHINE WITH TWO FILLING NOZZLES CONSIST OF: (1) FEEDING BLOWER (1) CONTROL PANEL AND (2) SILOS (4) WEIGHING DEVICES (2) FILLING NOZZLES (2) TOUCH SCREENS (1) PORTABLE DUST-FREE MACHINE (NOT IN THE PICTURE) TECHNIQUE DATA: MODEL: 618B TOTAL POWER: 8KW (FILLING MACHINE 2.5KW; AIR COMPRESSOR 5.5KW) AIR PRESSURE: 0.65 TO 1.0MPa WEIGHING CAPACITY: 0.3 TO 32G ACCURACY: ±2% OR ±0.2G FILLING EFFICIENCY: 1 TO 8G/SEC NUMBER OF FILLING NOZZLE: 2 MAX. STORE VOLUME: ABOUT 5KGS MACHINE DIMENSIONS: 2280mm×850mm×2000mm NET WEIGHT: 400KGS QUANTITY AVAILABLE: 1 Learn More

J-4765 AUTOMATIC HOT MELT GLUE MACHINE FOR MATTRESSES, 20 SECONDS PER MATTRESS -MAXIMUM MATTRESS WIDTH: 2100mm -MAXIMUM MATTRESS HEIGHT: 500mm QUANTITY: 1 Learn More

REFERENCE NUMBER: P-4324

PORTABLE WIPES, MODEL WL68

 

Model: WL68

Machine Characteristic
Control system: Multi-Axis Motion Controller
Drive element: servo motor
Operate interface: 8" LCD touch screen
Packing style: end seal & reciprocating  type
Frequency division detection: nonwoven, film, label detect respectively
Auto splicing: raw material & film automatic bonding, label automatic switching
Wipes stacking: manipulator
Inferior eliminate: color bonding connector rejected online
Flow control: 2.5-4 times, flow meter control
Moisture type: 4 fluid pipes  spray independently
SUS Agitate tank: 2 sets, 600L stainless steel agitate tank
Liquid level control: electronic detection, auto control

Specifications
Raw material: spunlaced nonwoven, therbond etc.  nonwovens
Raw material specification: max W800mm, φ1000mm
Axis QTY settings:2 rolls raw materials ,1 roll cut into 4 channels,1 roll stand by auto splicing
Diameter of ventilating shaft: 3"
Suitable packing material :BOPP  PET/PE PET/AL/PE etc. heat-seal material
Packing Film specification: max W420mm, φ350mm
Diameter of ventilating shaft: 3"
Suitable label: transparent label & opaque label
Label size: max W100mm  φ400mm
Axis QTY settings: 2 sets label, automatic switching without stopping(can be set as safety label)
Folding  type: Z fold
Wet wipes size:L90-105mm  W55-100mm
Open size: L175-205mm W140-200mm
Package size: L130-200mm W60-110mm H5-50mm
Production speed: 70 bags/min &1200 pieces/min
Machine space: L8100mm W4000mm H2100mm
Power: AC 380V 50/60Hz 20KW
Compressed air: 0.6-0.8Mpa 250L/min
Machine net weight : 7500kg

Option equipment: Coding machine Metal detector

 

QUANTITY: 1

Learn More

REFERENCE NUMBER: P-4331

PORTABLE WET WIPES MACHINE

 

Model: L62
Machine Characteristic
Control system: Multi-Axis Motion Controller & PLC
Drive element: servo motor
Operate interface:  LCD touch screen
Packing style: end seal & reciprocating  type
Detection online: splicing connector detect
Auto splicing: raw material automatic splicing 
Wipes counting: auto counting, set by LCD
Flow control: 2.5-4 times moisture
Moisture type: 2 liquid pipes spray
SUS Agitate tank: 600L stainless steel agitate tank
Liquid level control: electronic detect control automatically

Specifications
Raw material: spunlaced nonwoven, therbond etc.  nonwovens
Raw material specification: max W250mm, φ1100mm
Axis QTY settings:2 rolls raw materials , auto splicing
Diameter of ventilating shaft: 3"
Suitable packing material :BOPP  PET/PE PET/AL/PE etc. heat-seal material
Packing Film specification: max W420mm, φ350mm
Diameter of ventilating shaft: 3"
Suitable label: transparent label & opaque label (paste safety label need be marked)
Label size: max W100mm φ400mm
Diameter of ventilating shaft: 3"
Folding  type: Z, W fold
Wet wipes size:L100mm  W50-100mm(special specifications need be marked)
Open size: L200mm W140-250mm
Package size: L130-200mm W55-110mm H5-50mm
Production speed: 70 bags/min &550 pieces/min
Machine space: L4900mm W4700mm H2200mm
Power: AC 380V 50/60Hz 12KW
Compressed air: 0.6-0.8Mpa 300L/min
Machine net weight : about  3000kg

Option equipment: Coding machine Automatic Knife grinder

 

QUANTITY: 1

Learn More