Search results for: 'Proj'

R-3269 ANTIQUE WOOD FIRED PROBAT ROASTER PROJECT - 60 KILOS

HERE IS A RARE PROJECT - AS WE HAVE UN-EARTH A CLASSIC WOOD FIRED PROBAT ROASTER. MOST LIKELY FROM THE 30'S THAT IS CAST IRON CONSTRUCTION- LIKE TOTAL CAST IRON FROM THE OLD WORLD. THIS IS A 60 KILOS AND IT IS COMPLETE AND BEEN OUT IN A BARN FOR MANY YEARS. THE BELTS ARE SHOT - OBVIOUSLY, BUT WE OPENED EACH SLIDE GATE AND EACH DOOR WITHOUT DIFFICULTY - AND WITHOUT MOVING THE STUFF PILED UP ON THE SIDE - I BELIEVE IT TO BE TOTALLY COMPLETE. NOW, WE HAVE A CREW THAT CAN BE SENT IN TO PUT IT ALL INTO A PROTECTIVE BOX/CRATE AND GET IT SHIPPED. AS I DON'T KNOW IT THIS SHOULD GO INTO A MUSEUM OR INTO A REAL VISIBLE ROASTING OPERATION - AS IT COULD BE RESTORED AND UPGRADED - EVEN ADD A GAS BURNER IF NEEDED - BUT FOR SURE, IT IS A PROJECT.

THERE IS LITTLE TO NOTHING TECHNICAL - JUST HAVE TO PUT IT TOGETHER AS EACH PIECE IS OBVIOUS AS TO WHERE IT GOES. THE BOLT PATTERNS WILL NOT ALLOW FOR SOMETHING TO BE PUT IN THE WRONG SPACE. FIGURE A FOOT PRINT OF 5' WIDE BY; 9' DEEP AND 7 FOOT TALL.

QUANTITY: 1

R-3276 GOTHOT CAST IRON ROASTER ASSEMBLY PROJECT - 120 KILOS

THIS INCLUDES A LEFT-SIDE DUMP ROASTER, LOADER, DE-STONER, AFTERBURNER.
IT IS CURRENTLY IN STORAGE IN 8 PALLETS AND WILL REQUIRE ASSEMBLY AND RE-PAINTING AND SOME REBUILDING OF THE DRUM "DUMP DOOR" ASSEMBLY.
THE ROASTER WAS WORKING UNTIL THE DAY IT WAS DISCONNECTED. HOWEVER THE MOTORS AND FAN BLADES AS WELL AS SOME CONNECTING TUBES ARE OLD ENOUGH TO WARRANT RELACING. THIS IS A PROJECT - BUT GOTHOT IS WORTH PRESERVING
AFTERBURNER WAS BUILT BY DIEDRICH AND IS MUCH NEWER THAN THE ROASTER.
IT IS 3 PHASE POWER AND NATURAL GAS.

QUANTITY: 1

R-3268 HAS GARANTI ROASTER - 60 KILOS

BUILT 2013 & NEVER USED
DIMENSIONS: 91" H X 69" W X 104" D/ 2300 H X 1750 W X 2650 D mm
2,535 LBS. / 1,150 KG.
220 VAC
NATURAL GAS
INCLUDES LOADER AND DESTONER

THIS MACHINE IS LISTED HERE UNDER SOME DEGREE OF FRUSTRATION - AS THE SELLER BOUGHT THE MACHINE FOR A PROJECT (WITH CONSULTANT'S ADVISE) AND THE PROJECT TOTALLY GOT CHANGED AROUND AND THE ROASTER WAS SIMPLY NEVER NEED, NEVER INSTALLED, NEVER USED. AND TO MAKE MATTERS WORSE, THEIR BUILDING HAS NO NATURAL GAS ANYWHERE CLOSE. SO, HERE IS A TOTALLY NEW MACHINE - AS MAYBE 20 TO 30% LESS THAN BUYING IT BRAND NEW. AND IT IS SITTING RIGHT HERE IN THE US IN SOUTHERN CALIFORNIA. INCLUDES LOADER AND STONER.
BOTTOM LINE. THIS IS A SERIOUS MACHINE, REALLY EASY TO WORK ON, REALLY EASY TO RUN AND AVAILABLE IMMEDIATELY.

QUANTITY: 1

R-6855 STA IMPIANTI MILLENNIUM 3 ROASTING MACHINES

THE ROASTING MACHINES SERIES MILLENNIUM 3 REALIZED BY STA IMPIANTI SRL CONFIRM THEMSELVES CAPABLES OF A WORLD LEADING TRADE MARK IN DESIGN AND PROJECTATION OF INDUSTRIAL AUTOMATIC ROASTING MACHINES FOR COFFEE AND OTHER SIMILAR PRODUCTS. THESE MACHINES, ALLOWING HIGHLY INTEGRATED TECHNOLOGICAL SOLUTIONS, ANTICIPATE THE MOST ADVANCED MARKET DEMANDS.
THANKS TO THE CONSTANT PURSUIT OF HIGH QUALITY STANDARD AND THE COMPANY’S DESIRE TO PROVIDE AT THE SAME TIME A PRODUCT TAILORED TO THE NEEDS OF EACH CLIENT COMPANY, STA IMPIANTI SRL IS ABLE TO OFFER THE BEST SOLUTION IN THE MARKET.

THE ROASTING MACHINES SERIES MILLENNIUM 3 ARE GUARANTEE OF THE HIGHEST STANDARDS OF TECHNOLOGY DECLINED

ON CONCEPS OF HIGH PRODUCTION, MAXIMUM PERFORMANCE, RELIABILITY TOTAL SAFETY WITH LOW NOISE AND ENVIRONMENTAL EMISSIONS.

STANDARD EQUIPMENT:

ELECTRIC CONTROL BOARD WITH PLC + TOUCH SCREEN FOR FULL AUTOMATIC OR PARTIAL DRIVE.
AUTOMATIC ROASTING PROCESS WITH RECORDING – STORAGE OF ROASTING PARAMETERS
SYSTEM CONTROL THROUGH PLC + TOUCH SCREEN
FITTINGS FOR PC
ALARM SYSTEM BY BUZZER AND SIGNAL LAMP WITH DISPLAY ANOMALIES.
PRE-HEATING SYSTEM FOR RAW COFFEE IN STAND-BY
TEMPERATURE COFFEE CONTROL BOTH DURING ROASTING AND COOLING CYCLE.
HOT AIR GENERATOR (STA IMPIANTI‘ PATENTED SYSTEM)
“LOW INERTIA” DEVICE FOR IMMEDIATE STARTING OF PRODUCTION
INDUSTRIAL GAS BURNER TYPE MODULATING OR GASOIL BURNER AT MULTI STAGES OF FLAME ACCORDING APPLICATION.
PROCESS AIR ADMITTANCE CONTROL SYSTEM
FITTINGS FOR CLEAN AIR BY AIR EXCHANGER
CONTROL BOARD COMPLETE WITH LIGHTING DEVICE
SCREENER WITH PNEUMATIC DRAWING
WATER PUMP COMPLETE WITH TANK AND SAFETY BY PASS DEVICE
PRE COOLING SYSTEM OVER ROASTING DRUM
PRE COOLING SYSTEM CONNECTED TO THE COOLER
FIRE PREVENTION SYSTEM LINKED TO THE CYCLONE-CHAFFS COLLECTOR.
CYCLONE-CHAFFS COLLECTOR WITH DRIVEN STAR VALVE
CYCLONE FOR COOLER AND DESTONER
SELF CLEANING COOLING TANK
ADDITIONAL EMERGENCY UNLOADING FOR COOLER
INTEGRATED DESTONER
SERVOCONTROL DEVICE FOR REMOTE ADJUSTMENT OF DESTONER
SOUND PROOFING SYSTEM
GLOBAL SAFETY PROTECTION
OPTIONAL EQUIPMENT

COMPUTERIZED AUTOMATIC ROASTING PROCESS CARP MANAGED BY PC AND MONITOR.
CLEAN AIR BY AIR GENERATOR-EXCHANGING SYSTEM
POST COMBUSTOR TYPE THERMAL BURNER OR CATALYTIC
EXTERNAL DRAWING AIR (QUICK FRESH) SYSTEM
DESTONER WEIGHING CELLS
CHAFFS COMPACTOR.
HEATING ADDUCTION SYSTEM:

PATENTED SYSTEM BY STA IMPIANTI SRL SPECIFICALLY STUDIED FOR ROASTING LINE APPLICATIONS. THIS SYSTEM ALLOWS SHORTER AND HOMOGENEOUS ROASTING TIME:

BY CONVECTION HOT AIR FLOWING THROUGH THE COFFEE IN THE DRUM
BY CONDUCTION DUE TO THE HEATED ROASTING DRUM
BY IRRADIANCE FROM THE GRATE LOCATED BETWEEN THE FLAME AND THE ROASTING DRUM (INFRARED RAYS)
HOT AIR GENERATOR:

THREE ARE THE POSSIBILITIES OF SETTLEMENT TO THE OVER INDICATED SYSTEM:

AIR BY AIR EXCHANGING SYSTEM WITH RECOVERY DEVICE (100% CLEAN AIR)
CONVENTIONAL GENERATOR
HEATING GENERATOR WITH PARTIAL OR TOTAL RECYCLE

R-3261 OFFICINE VITTORIA ROASTER WORKING ANTIQUE - 20 KILOS

NICE RESTORED WORKING ANTIQUE FOR THE CIRCA 1950'S. THERE IS A LITTLE GAS BURNER ON THE END OF THE HEAT INLET TUBE - AS THAT IS A COMMON FIX AS ORIGINALLY THE HEAT CAME FROM AN INCINERATOR LOOKING COAL BURNER - SO THE STICKING OF A SMALL PACKAGE BURNER ON THE SAME INLET TUBE WORKS GREAT AS THE SUCTION EXHAUSTING THE AIR THROUGH THE ROASTING DRUM (PERFORATED) SIMPLY PULLS IN THE HEAT NEEDED AND EVERYBODY IS HAPPY. YOU WILL NEED TO SUPPORT THAT INLET ARM IN SOME MANOR.

ADDITIONAL CONCERN IS THERE IS NO SHOWN CHAFF COLLECTOR - AS I WILL HAVE TO VERIFY IF THERE IS ONE - OTHERWISE A SEPARATE CHAFF COLLECTOR WILL NEED TO BE ADDED. THIS IS ALL SET FOR EUROPEAN VOLTAGE - 3 PHASE.

KEEP IN MIND, THE BASE IS ALL CAST IRON - SO THIS OPERATES REALLY QUIETLY, AND THAT IS A GOOD THING. THE SHOWMANSHIP IS STRONG ON THIS MACHINE AS IT LOOKS REALLY GREAT ON A SHOWROOM OR COFFEEHOUSE FLOOR. AS IT IS MADE TO BE SEEN. THIS IS A PARTIAL PROJECT AS THE INSTALLATION WILL TAKE SOME DETAIL AND REMEMBER THAT THERE ARE NO OFFICIAL PARTS SUPPLY - BUT EVERYTHING ON THESE MACHINES IS QUITE EASY TO ACCESS AND HAVING A LOCAL MACHINE SHOP AT HAND IS PROBABLY GOING TO BE NEEDED IN THE FUTURE - AFTER ALL, IT IS A 1950'S VINTAGE.

ALLOW FOR A FLOOR SPACE OF 4' X 7' TO ACCOMMODATE THE ROASTER AND CHAFF COLLECTOR. (1.22M X 2.12M)

THERE WILL BE SOME COST TO CRATE - TO BE ADVISED AS SOON AS YOU KNOW THIS IS THE RIGHT MACHINE FOR YOUR OPERATION.

IN PERFECT WORKING CONDITION

QUANTITY: 1