Search results for: 'Electric di'

REFERENCE NUMBER: T-6843 SPINNBAU NONWOVEN LINE, YEAR 1994 BRAND: SPINNBAU SHORT DESCRIPTION: NONWOVEN LINE YEAR: 1994 NONWOVEN LINE CONSISTING OF 1. CARD FEEDING: CARD FEEDING R&S, NEW, IN 2500mm WORKING WIDTH, CONSISTING OF: ONE R&S MATERIAL BIN IN 2500mm WORKING WIDTH, 600mm DEPTH AND A COMPLETE HEIGHT OF 2500mm, WITH TOP AND BOTTOM WINDOW AT BOTH SIDES, FILLING LEVEL CONTROLLED BY IN HEIGHT ADJUSTABLE INFRARED DEVICES. ONE DOOR AT THE BACKSIDE FOR CLEANING, LOCKED BY SECURITY SWITCHES. THE VITIATED AIR ESCAPES THROUGH THE PERFORATED SHEETMETAL AT THE TOP. THESE AREAS ARE COMPLETELY COVERED, THE OUTGOING AIR CAN BE FILTERED BY AN EXCISTING FILTERSTATION OR OPTIONALLY BY FILTERBAGS, 2 DELIVERY ROLLERS. ONE R & S CHUTE FEEDER IN 2500mm WORKING WIDTH CONSISTING OF: ONE OPENING ROLLER DIAMETER 450mm, ONE VIBRATION CHUTE, FIBRELEVEL CONTROLLED BY ULTRASONIC, CHUTE ADJUSTABLE OVER TOOTH RAILS IN DEPTH FROM 80 TO 240mm, TWO DRAWING OFF ROLLERS, ONE FEEDING TABLE WITH TRANSILON BELT, PREPARED FOR SERVOLAP. DRIVES: DELIVERY ROLLERS: AC -GEARBOXMOTOR 0.55 KW, FC OPENING ROLLER: AC-MOTOR 2.2 KW VIBRATION: AC-GEARBOXMOTOR, 0.55 KW, FC FEEDING TABLE: AC-GEARBOXMOTOR, 0.55 KW, FC 2. CARDING; ONE SPINNBAU DOUBLE DOFFER CARD, IN 2500mm WORKING WIDTH, YEAR 1994: CARD, FOLLOWING EQUIPPED: 1 CYLINDER FEEDING DEVICE WITH FEED PLATE: 1 FEED ROLLER DIAMETER 159mm 1 LICKER-IN DIAMETER 292mm PRE-OPENING: 1 BREAST DIAMETER 412mm 1/1 WORKER/STRIPPER DIAMETER 213/118mm 1 INTERMETE ROLLER DIAMETER 412mm CARD: 1 MAIN CYLINDER DIAMETER 1500mm 5/5 WORKERS/STRIPPERS DIAMETER 213/118mm 1 DOFFER, TOP DIAMETER 550mm 1 DOFFER, BOTTOM DIAMETER 550mm 2 CONDENSING ROLLERS TOP DIAMETER 292mm TOP DRAWING OFF DEVICE, NEW: 1 DRAWING OFF ROLLER/WIRED DIAMETER 159mm 1 DRAWING OFF ROLLER/STEEL RUBBER: DIAMETER 159mm 1 CLEANING ROLLER WITH INTEGRATED ELECTRONIC, WHEN DIAMETER OF CLEANING IS GETTING BIGGER, CARD WILL STOP. BOTTOM DRAWING OFF DEVICE, NEW: 1 DRAWING OFF ROLLER/WIRED DIAMETER 159mm 1 DRAWING OFF ROLLER/STEEL RUBBER: DIAMETER 159mm 1 CLEANING ROLLER WITH INTEGRATED ELECTRONIC, WHEN DIAMETER OF CLEANING IS GETTING BIGGER, CARD WILL STOP. DRAWING OFF TABLES: TOP TRANSILON BELT BOTTOM: TRANSILON BELT COVERS: THE CARD HAS COVERS TO CLAP UP AND DOWN (SECURED WHEN CLAPPED UP), THE SIDES ARE FULLY COVERED AND ELECTRONICALLY LOCKED. RIGID WIRE: ONE COMPLETE SET OF RIGID WIRE, MOUNTED, FOR FIBRES 1.5 DTEX - 17 DTEX, CAPACITY UP TO 800 KG/H ELECTRIC: VOLTAGE: ~400 V AC, 3 PHASES CONTROL VOLTAGE: ~220 V AC, =24V DC FREQUENCY: 50 Hz COLOUR: MACHINE: RAL 5015/ 9001 (IF YOU LIKE WE CAN CHANGE) CONTROL CABINET: RAL 7032, GREY SWITCH BOARD: RAL 7032, GREY ELECTRICAL DRIVES: FEED ROLLER: 1 AC GEARBOXMOTOR, FREQUENCY CONTROLLED LICKER-IN: MECHANICAL FROM BREAST BREAST: 1 AC GEARBOXMOTOR, FREQUENCY CONTROLLED WORKERS BREAST: MECHANICALLY FROM BREAST INTERMEDIATE ROLLER: MECHANICALLY FROM MAINSWIFT MAIN SWIFT: 1 AC-MOTOR FREQUENCY CONTROLLED WORKERS: 1 AC GEARBOXMOTOR, FREQUENCY CONTROLLED DOFFERS: 2 AC GEARBOXMOTORS. FREQUENCY CONTROLLED CONDENSING ROLLERS: 1 AC GEARBOXMOTORS. FREQUENCY CONTROLLED DRAWING-OFF DEVICES: 2 AC GEARBOXMOTORS. FREQUENCY CONTROLLED DRAWING-OFF TABLES: 2 AC GEARBOXMOTORS, FREQUENCY CONTROLLED SWITCHBOARDS AND CONTROLS: SWITCHBOARDS RITTAL SERIES, COMPLETE WIRED. SWITCHBOARDS WITHOUT COOLING DEVICES. CONTROL CABINET OPERATION WITH COLOURED SCREEN, FITTED IN CONTROL CABINET OPERATED BY SIEMENS SPS S7-300 1 SET OF CABLE MATERIAL: FOR 20 MTR LENGTH BETWEEN MACHINERY AND SWITCHBOARD WITHOUT INSTALLATION MATERIAL ERECTION AND STARTING UP: IS NOT INCLUDED, SHOULD BE MADE BY US FOUNDATION: ONE FOUNDATION IN 750mm HEIGHT, WITH SIDEWALKS AROUND, TWO STEPS ON EACH SIDE. SUCTION: CONNECTION FOR THE DOFFER AND TOP OF CARD 3. CROSSLAPPING, NEW: ONE REISKY & SCHLESE CROSSLAPPER, TYPE RS 100 IN 2500mm WORKING WIDTH (BELT WIDTH 2800mm) AND 2500mm LAPPING WIDTH (BELT WIDTH 2700mm) MAX INFEEDING SPEED: 100 MTR/MIN, DELIVERY SPEED OF DRAWING OFF TABLE: FROM 0 TO 20 MTR/MIN, CONSISTING OF: ONE FEEDING TABLE IN 1000mm LENGTH MOUNTED IN IT'S OWN FRAME, ADJUSTABLE IN THE HEIGHT ACCORDING TO THE DOFFER, FURTHER THE COMPLETE FEEDING TABLE CAN BE MOVED UP IF THE DOFFER HAS TO BE DRAWN BACK. THE CROSSLAPPER ITSELF GUIDES THE WEB FROM THE INFEED DOWN TO THE OUTLET BETWEEN THE CONVEYORS, WHICH HAVE ANTISTATIC PROPERTIES. THE TENSION AND THE DISTANCES BETWEEN THEM CAN BE ADJUSTED ACCORDING TO THE DIFFERENT FIBRES. THE CONVEYORS ARE EQUIPPED WITH AUTOMATIC EDGE GUIDES, SO THAT THEY ARE RUNNING IN THE CENTRE. THE LAID WEB IS COVERED BY THEM. THE SERVO- DRIVES ARE RESPONSIBLE FOR THE PERFECT SYNCHRONISATION AND THE EXACT REVERSAL OF THE CARRIERS. THE SWITCHBOARD IS EQUIPPED WITH A COULOURED TOUCHSCREEEN, WHERE ALL NECESSARY PARAMETERS CAN BE PROGRAMMED, ALSO DIFFERENT CURVES FOR STORING THE WEB DURING REVERSALS. DRIVES: FEED TABLE: AC-SERVO-MOTOR BELT 1: AC-SERVO-MOTOR BELT 2: AC-SERVO-MOTOR TOP CARRIER: AC-SERVO-MOTOR BOTTOM CARRIER: AC-SERVO-MOTOR DRAWING OFF TABLE: AC-SERVO-MOTOR HEIGHT DRAWING OFF TABLE LEFT: AC-LINEARMOTOR HEIGHT DRAWING OFF TABLE RIGHT: AC-LINEARMOTOR OPERATION: BY COLOURED TOUCHSCREEN, SIEMENS IN CONTROL CABINET OF CARD. PARAMETERS: MANUEL / INLINE INFEED SPEED DRAFT (INFEED SPEED/LAYING SPEED) NUMBER OF LAPS LAPPING WIDTH FROM MIDDLE TO THE LEFT AND TO THE RIGHT DRAWING OFF SPEED AUTOMATICALLY SHOWN DEPENDING ON LAYERS DARWING OFF TABLE HEIGHT LEFT / RIGHT LAYING SPEED RECEIPES FAULT SHOWING SWITCHBOARD AND ELECTRONIC DEVICES: SWITCH BOAD RITTAL, COMPLETE WIRED. SWITCHBOARD WITHOUT COOLING DEVICE. CONTROL PANNEL RITTAL. CONTROLLED BY S7 SIEMENS 10000mm OF CABLES BETWEEN SWITHBOARD AND MACHINE/CONTROLPANEL QUANTITY: 1 Learn More

LIST NUMBER: L-2987
SIZING MACHINES FOR SALE

REFERENCE NUMBER: P-6749
ROTAL
SIZING MACHINE
YEAR: 1990
QUANTITY: 1

REFERENCE NUMBER: P-7175
BENNINGER ZELL
SIZING
YEAR: 1994
HEAD STOCK WORKING WIDTH: 2800mm
QUANTITY: 1

REFERENCE NUMBER: P-5168
SUCKER
MODEL: MOENUS Z 14
SIZZING MACHINE
WIDTH: 3400mm

BENNINGER
TYPE: BEN DIRECT
WARPER
QUANTITY: 1

REFERENCE NUMBER: P-5818
SUCKER MULLER
SIZING 2 SIZING BOX WIH BENNINGER DIRECT WARPER
YEAR: 1989
WIDTH: 130 INCHES
QUANTITY: 1

REFERENCE NUMBER: P-5586
BENNINGER-ZELL
WARP SIZING LINE
YEAR: 1994
WORKING WIDTH: 3400mm
QUANTITY: 1

REFERENCE NUMBER: C-1229
SUCKER MULLER SIZING MACHINE
MODEL ZG6
YEAR 1984
WORK WIDTH 3000mm
SCHLAFHORST DIRECT WARPING MACHINE MODEL MZD
YEAR 1984
WORK WIDTH 1600mm
QUANTITY: 1

REFERENCE NUMBER: R-1913
SUCKER SIZING
WORKING WIDTH: 3300mm
QUANTITY: 1

REFERENCE NUMBER: R-3193
BENNINGER SIZING MACHINE
TYPE: BEN-SIZE TEC A13
YEAR: 1994
HEADSTOCK WIDTH: 3400mm
QUANTITY: 1

REFERENCE NUMBER: P-3562
WEST POINT
MODEL: 861
SLASHER
YEAR: 1993
HEADWAY WIDTH: 126 INCHES
QUANTITY: 1

Learn More

EFFECTIVE WIDTH: 1600mm
DAILY OUTPUT: 10,000 KGS PER DAY
WEIGHT RANGE: 10 TO 150 GSM
FILAMENT DIAMETER: 1.6 TO 2.0 DENIER
SPEED: 350 TO 400 METERS PER MINUTE
RAW MATERIAL: POLYPROPYLENE (PP)
DIMENSIONS: 35,000 X 15,000 X 11,000mm
VOLTAGE: 380 VOLTS, 3 PHASE

CONSISTING OF:

SPUNBOND EQUIPMENT

PP VACUUM SUCTION MACHINE (2)
7800 TO 900 KGS PER HOUR
AIR CAPACITY: 300 CUBIC METERS PER HOUR
POWER: 7.5 KW

MASTER BATCH DOSING UNIT (2)
ACCURACY: 0.01%

EXTRUDER (2)
DIAMETER: 130mm
SINGLE SCREW (2)
HEATING SYSTEM: ELECTRICITY
MOTOR: 75 KW

MELT FILTRATION MACHINE (2)
PIPE SIZE: 50mm
FILTER AREA: 3.5 SQUARE METERS
MELT FLOW: 650 KGS PER HOUR
DOUBLE FILTRATION CHAMBER

MELTING PUMP (2)
40 RPM
FLOW CAPACITY: 400 KGS PER HOUR
POWER: 7.5 KW

SPINNING BEAM (2)
DIMENSIONS: 1900 X 256mm
HANGER TYPE MELT DISTRIBUTION
HEATING SYSTEM: OIL
WORKING TEMPERATURE: 200 TO 260 CELSIUS

SPINNERET (4)
HARDNESS: 30
SIZE: 1900mm LONG X 256mm WIDE
HOLE DIAMETER 0.45mm
HOLE QUANTITY: 6500 HOLE PER METER

QUENCHING UNIT (2)
WORKING TEMP: 20 CELSIUS
AIR FLOW CAPACITY: 12,000 CUBIC METERS/H
AIR PRESSURE: 6500
FILTER SIZE: 80#

FILAMENT DRAFT UNITS (2)
AIR PRESSURE: 5020PA
AIR FLOW CAPACITY: 12,000 CUBIC METERS/H
INSIDE TEMP: 10 TO 25 CELSIUS
FILAMENT FINENESS: 1.6 TO 2.0 DENIER

MELT BLOWN EQUIPMENT

VACUUM SUCTION MACHINE (2)
LOAD CAPACITY: 700 TO 900 KGS PER HOUR
AIR CAPACITY: 300 CUBIC METERS/H
POWER: 7.5 KW

MASTER BATCH DOSING UNIT (2)
4 HOPPERS
200 KGS HOPPER LOAD

EXTRUDER
DIAMETER: 105mm
SINGLE SCREW
MOTOR: 18.5 KW

MELT FILTER
DOUBLE CYLINDER
HYDRAULIC
MELT FLOW CAPACITY: 450 KGS/HR
FILTER SIZE: 150mm DIAMETER
ELECTRIC HEATING

MELTING PUMP
SPEED: 40 RPM
MELT FLOW CAPACITY: 450 KGS PER HOUR
POWER: 7.5 KW

MELT BLOWN DIE SPINNARET
SPINNERET HOLE SIZE: 0.32 TO 0.35mm
HOLE DISTANCE: 40 TO 42 PER INCH
FABRIC WEIGHT: 2 TO 200 GSM

HIGH PRESSURE AIR BLOWER
AIR FLOW CAPACITY: 70 TO 100 CUBIC METERS PER MINUTE
AIR PRESSURE: 100 KPA
POWER: 200 KW

WEB FORMING MACHINE
SPEED: 100 METERS PER MINUTE

ELECTRIC TREATMENT
VOLTAGE: 220 VOLTS, 50 Hz
INPUT CURRENT: 3A
OUTPUT VOLTAGE: 60 KV
TREAT WEB WIDTH: 1.6 METERS

HOT AIR HEATING MACHINE
WORKING TEMP: 350 CELSIUS
PRESSURE: 0.8 KPA
HEATING: ELECTRIC
POWER: 200 KW

THERMAL CALENDER
PROCESSING SPEED: 400 METERS PER MINUTE
ROLLER SIZE: 2000mm LONG, 520mm DIAMETER
EMBOSSING ROLLER: 1
LINEAR PRESSURE: 30 TO 125 N/mm
HEATING SYSTEM: OIL

HYDROPHILIC MACHINE
SPEED: 400 METERS PER MINUTE
FEEDING SYSTEM: DOUBLE KISSING ROLLER
KISS ROLLER DIAMETER: 215mm
LIQUID TANK: 200 KGS WITH HEAT/WARM AND MIX

DRYING SYSTEM:
INFRARED + HOT AIR
DRIVE ROLL SIZE: 150mm
HEATING EQUIPMENT: QUARTZ HEATER, HOT AIR BLOWER, EXHAUST AIR BLOWER

INSPECTION MACHINE
EFFECTIVE WIDTH: 1600mm
INSPECTION SPEED: 400 METERS PER MINUTE
INSPECT GSM: 10 TO 40 GSM

AUTOMATIC WINDING MACHINE
SPEED: 400 METERS PER MINUTE
ROLLER DIAMETER: 2000mm
ROLLER EXCHANGE SYSTEM: AUTOMATIC
FABRIC INSPECTOR: ONLINE
POWER: 15 KW

HIGH SPEED SLITTING MACHINE
PROCESS SPEED: 800 METERS PER MIN
ROLL DIAMETER: MAX 1500mm
SLITTING WIDTH: 80mm
PAPER TUBE SIZE: 76mm DIAMETER
AUTO TENSILE CONTROL: AVAILABLE ONLINE
METER COUNTING: AVAILABLE ONLINE

OIL HEATER (4)
HEATING POWER: 60 KW
MOTOR POWER: 7.5 KW
OIL PUMP FLOW: 30 CUBIC METERS PER SECOND
PRESSURE: 0.4 KPA

WATER CHILLER
DRIVE SYSTEM: SCREW
COOLING CAPACITY: 300,000 CALORIES
TEMP: 0 TO 20 CELSIUS
POWER: 110 KW

AIR BLOWER
SPEED: 1450 RPM
AIR BLOW CAPACITY: 12,000 CUBIC METERS PER HOUR
PRESSURE: 5200 PA
POWER: 30 KW x 3, 45 KW x 1

AIR COMPRESSOR
DRIVE SYSTEM: SCREW
PRESSURE: 0.8 KPA
POWER: 15 KW

HEATING SYSTEM: ELECTRIC
TEMP: 350 CELSIUS
HEATING TIME: 6 TO 8 HOURS
POWER: 4 KW

ULTRASONIC CLEANING MACHINE
3mm THICK
SIZE: 2000 X 500mm
FREQUENCY VIBRATION: 100 KHZ
TEMP: 40 CELSIUS

ELECTRONIC PANEL BOARD

PLATFORM

Learn More

LIST NUMBER: L-3004
SIZING MACHINES FOR SALE

REFERENCE NUMBER: C-5212
BENNINGER SIZING MACHINE
TYPE BEN SIZETEC
YOM: 2004
WORKING WIDTH: 2400mm
BENINGER DIRECT WARPER
TYPE BEN DIRECT
YOM: 2005
WORKING WIDTH: 2400mm
QUANTITY: 1

REFERENCE NUMBER: P-4682
BENNINGER
SIZING MACHINE
YEAR: 2002
WIDTH: 2800mm
QUANTITY: 1 SET

REFERENCE NUMBER: P-7130
SUCKER MULLER
TYPE: HACOBA
SIZING MACHINE
YEAR: 1999
WORKING WIDTH: 1800mm
QUANTITY: 1

REFERENCE NUMBER: C-3650
OFFER 001
SUCKER MOENUS Z 14 SIZING MACHINE
WIDTH: 3400mm
YEAR: 2006
QUANTITY: 1
OFFER 002
BENNINGER BEN DIRECT WARPING MACHINE
YEAR: 2005
WIDTH: 2200mm
QUANTITY: 1

REFERENCE NUMBER: A-1197 (1212GHBXX11) A
MAKE: BENNINGER
MODEL: BEN SIZETEC
YEAR: 1998
Width - 2000mm
QUANTITY: 2

REFERENCE NUMBER: P-6712
SUCKER MULLER
SIZING MACHINE
YEAR: 2003
HEADSTOCK WIDTH: 3600mm
QUANTITY: 1

REFERENCE NUMBER: M-5040
(1 SET) BENNINGER SIZING MACHINES (SLASHERS), YEAR 2000

REFERENCE NUMBER: R-3746
ITEM 001
KARL MAYER​ DIRECT WARPING ​MACHINE
YEAR: 20​06​
WIDTH: 2​0​00mm
​QUANTITY: 1 SET
ITEM 002
KARL MAYER SIZING MACHINE
YEAR: 2011
QUANTITY: 1 SET

Learn More

REFERENCE NUMBER: T-6855 AUTEFA, DILO, SPINNBAU COMPLETE NONWOVEN LINE BRAND: AUTEFA, DILO, SPINNBAU SHORT DESCRIPTION: COMPLETE NONWOVEN LINE ITEM 001 SINGLE DOFFER CARD BY “BESSI” - ITALY YEAR 1966 - WORKING WIDTH 2500mm - HOPPER-FEEDER WITH SCALE (WEIGHPAN) AND TOP SILO - INLET UNIT WITH ROLLERS - BREAST UNIT DIAMETER 1500mm WITH 3 PAIRS WORKERS/ STRIPPER (ORIGINALLY EQUIPPED WITH 5 PAIRS, UNUSED 2 PAIRS STILL AVAILABLE) - FANCY ROLL - TRANSPORT ROLL DIAMETER 1200mm - SWIFT DIAMETER 1500mm WITH 3 PAIRS WORKERS/ STRIPPER (ORIGINALLY EQUIPPED WITH 5 PAIRS, UNUSED 2 PAIRS STILL AVAILABLE) - DOFFER DIAMETER 1500mm WITH FLY-COMB - FLEXIBLE AND RIGID METALLIC WIRES IN EXCELLENT CONDITIONS QUANTITY: 1 ITEM 002 CROSS-LAPPER BY “MAK-AUTEFA” - GERMANY MODEL 101-42 YEAR 1965 - INLET WORKING WIDTH 2500mm - EXIT WORKING WIDTH 3000mm QUANTITY: 1 ITEM 003 PRE-NEEDLER BY “DILO” - GERMANY MODEL NFZ 3000 YEAR 1967 - WORKING WIDTH 3000mm - 2 NEEDLE BOARDS WITH TOTALLY 3000 NEEDLES / LIN MT - WITH BATT INLET UNIT QUANTITY: 1 ITEM 004 FINISH NEEDLERS BY “DILO” MODEL OD II 25 YEAR 1979 EACH - WORKING WIDTH 2500mm EACH - EACH ONE WITH 2 NEEDLE BOARDS WITH TOTALLY 5000 NEEDLES / LIN MT QUANTITY: 2 ITEM 005 TRANSVERSAL CUTTER BY “SPINNBAU-AUTEFA” - GERMANY. YEAR 1973 - WORKING WIDTH 2500mm QUANTITY: 1 ITEM 006 LONGITUDINAL CUTTER ITALIAN MAKE + ROLL WINDER ITALIAN MAKE ON ELECTRONIC WEIGHTING CELLS. WORKING WIDTH 2500mm QUANTITY: 1 ITEM 007 ROLLS LIFTING CRANE QUANTITY: 1 ALL ELECTRIC MOTORS AND CONTROL PANELS 400 V / 50 Hz Learn More

M-6507 RIETER G5/11 RING FRAMES YEAR 1991

RING FRAMES
MAKE: RIETER
MODEL: G 5/11
YEAR: 1991
1,008 SPINDLES
70mm GAUGE
P3 DRAFTING
ROLLER DIAMETER 27mm-25mm-27mm
SHORT 36mm CRADLE AND NOSE BAR
WHARVE DIAMETER: 21mm
LIFT: 190mm
RING DIAMETER: 42mm
34KW MAIN MOTOR
COMPLETE WITH ALL PARTS ELECTRICALS

QUANTITY: 4

Learn More

C-3964 JAGENBERG CUTTING MACHINE, WIDTH 1800mm, YEAR 1973 TO 2006

JAGENBERG CUTTING MACHINE
BRAND: JAGENBERG
YEAR: 1973 TO 2006
WIDTH: 1800mm

QUANTITY: 1

Learn More

SEMI-AUTOMATIC NOSE CLIP WELDING MACHINE FOR NOSE CLIP WELDING FOR DUST MASK RESPIRATORS, IT’S EASY TO OPERATE, FIRM WELDING EFFECT. THIS MACHINE INCORPORATES CONSTANT TEMPERATURE WELDING, WHICH IS NOT HARMFUL TO THE FABRIC, IT’S THE IDEAL MACHINE FOR DUST MASK RESPIRATOR MANUFACTURING.

 

FEATURES:

1. THIS MACHINE IS EASY TO OPERATE; THE GLUED ALUMINUM NOSE CLIP IS MOVED BY PNEUMATIC THEN WELDED ONTO THE MASK.

2. IT’S HIGH PRECISION AND THE NOSE CLIP WELD IS FIRM.

3. WELDING WITH CONSTANT TEMPERATURE WHICH IS NOT HARMFUL TO THE FABRIC.

 

ITEM NAME	TECHNICAL PARAMTER	QTY	REMARK
SPECIFICATION	1200mm X 650mm X 1000mm	1	HONGDA
WEIGHT	50KG
EFFICIENCY	8 TO 15PCS/MIN
VOLTAGE	220V/380V
AIR PRESSURE	5KG/CM²
FREQUENCY	20KHZ
POWER	600W
MOLD SERVO MOTOR	SGM7G-09AFC61 4.4KW	1	YASKAWA
ULTRASONIC POWER SERVO MOTOR	SGM7G-13AFC61 1.3KW	2	YASKAWA
MATERIAL PULLING SERVO MOTOR	SGM7G-09AFC61 0.85KW	2	YASKAWA
MATERIAL FEEDING/CORRECTING/INDENTATION MOTOR	130BYG-350A	4	SONGYANG
POUCHING MOTOR	110BYG-350B	4	SONGYANG
110 STEPPER MOTOR	110BYG-350A	10	SONGYANG
UP AND LOWER MOTOR	90BYG-350A	2	SONGYANG
STEPPER MOTOR 56	SY57STH56-2004A	8	SONGYANG
DIRECT CURRENT MOTOR	0.4KW	2
DIRECT CURRENT MOTOR	0.6KW	1
ASYNCHRONOUS THREE-PHASE MOTOR	90S-6	1	0.75KW
FREQUENCY CONVERTER	AVF200-0152	1	1.5KW
MAIN PNEUMATIC COMPONENTS: AIRTAC(TAIWAN); MAIN ELECTRICAL COMPONENTS: PANASONIC(JAPAN), SICK(GERMANY), DONLIM(CHINA&JAPAN), ETC.

 

EMAIL US FOR PRICE & PICTURES

INCLUDE OUR REFERENCE NUMBER

 

Learn More

AUTOMATIC RESPIRATOR REPLACEMENT FILTER MAKING MACHINE IS ALSO CALLED A PARTICULATE RESPIRATOR FILTER MAKING MACHINE OR HALF FACE RESPIRATOR FILTER MAKING MACHINE, IT’S MADE UNDER MATURE TECHNOLOGY THAT SUPPORTS AUTOMATICALLY MATERIAL FEEDING, WELDING, PUNCHING AND CUTTING, REPLACEMENT FILTER FORMING, THIS MACHINE IS EASY TO OPERATE, BY CHANGING THE ROLLER, IT CAN PRODUCE DIFFERENT SHAPES OF FILTER. THIS MACHINE INCORPORATES ADVANCED ULTRASONIC WELDING AND EQUIPPED WITH CONSTANT TEMPERATURE CONTROLLER WHICH ENSURES THE FILTER FIRMLY AND CLEARLY WELDED.

 

FEATURES:

1. ADVANCED ULTRASONIC TECHNOLOGY WITH FIRM WELDING EFFECT, IT’S EQUIPPED WITH PULL AND PUSH TYPE MATERIAL FEEDING WHICH MAKES IT EASIER OPERATING.

2. THE MOLD (PATTERN ROLLER) CAN BE CUSTOMIZED TO PRODUCE DIFFERENT FILTERS.

3. THE WELDING LINE IS CLEAR AND FIRM.

 

ITEM NAME	TECHNICAL PARAMETERS	QTY	REMARK
SPECIFICATION	1800mm X 1200mm X 1800mm	1	HONGDA
WEIGHT	500KG
EFFICIENCY	20 TO 30PCS/MIN
VOLTAGE	220V/380V
AIR PRESSURE	3-6KG/CM²
FREQUENCY	15/20KHZ
POWER	4200W
MOLD SERVO MOTOR	SGM7G-09AFC61 4.4KW	1	YASKAWA
ULTRASONIC POWER SERVO MOTOR	SGM7G-13AFC61 1.3KW	2	YASKAWA
MATERIAL PULLING SERVO MOTOR	SGM7G-09AFC61 0.85KW	2	YASKAWA
MATERIAL FEEDING/CORRECTING/INDENTATION MOTOR	130BYG-350A	4	SONGYANG
POUCHING MOTOR	110BYG-350B	4	SONGYANG
110 STEPPER MOTOR	110BYG-350A	10	SONGYANG
UP AND LOWER MOTOR	90BYG-350A	2	SONGYANG
STEPPER MOTOR 56	SY57STH56-2004A	8	SONGYANG
DIRECT CURRENT MOTOR	0.4KW	2
DIRECT CURRENT MOTOR	0.6KW	1
ASYNCHRONOUS THREE-PHASE MOTOR	90S-6	1	0.75KW
FREQUENCY CONVERTER	AVF200-0152	1	1.5KW
MAIN PNEUMATIC COMPONENTS: AIRTAC (TAIWAN); MAIN ELECTRICAL COMPONENTS: PANASONIC (JAPAN), SICK (GERMANY), DONLIM (CHINA&JAPAN), ETC.

 

EMAIL US FOR PRICE & PICTURES

INCLUDE OUR REFERENCE NUMBER

Learn More

FLATTEN ALL TYPES OF MATTRESSES AND ROLL UP THE FLAT POCKET SPRING MATTRESSES.

FLATTENING AND ROLLING MATTRESSES HAS THE ADVANTAGE OF MINIMIZING THE STORAGE AREA AND

FACILITATE THE TRANSPORTATION AND LOWER TRANSPORTATION COSTS.

 

PRODUCTION CAPACITY:  3 MATTRESSES PER MINUTE FOR NORMAL PACKING.

MATTRESS SIZE: MIN. 700 X 1900mm TO MAX. 2100 X 2100mm

MATTRESS HEIGHT: 50mm TO 400mm

PRESSING SYSTEM: PNEUMATIC FOR NORMAL PACKING, HYDRAULIC SYSTEM FOR FLATTENING AND ROLL PACKING

PNEUMATIC PRESSURE: 482 KGS (8 BARS)

HYDRAULIC PRESSURE: 65 TON

WIDTH OF FILM ROLLS: MIN. 2200 mm TO MAX. 2650 mm

MAX. DIAMETER OF FILM ROLLS: 320mm

MAX. WEIGHT OF FILM ROLLS: 200 KGS

TYPE OF NYLON: PE FILM

THICKNESS OF FILM: 50 TO 150 MICRON (5 TO 15)

POWER REQUIREMENTS: 3 PHASE 380 V OR AS PER CUSTOMER

TOTAL ELECTRIC DRAW: 20 KW

WEIGHT: APPROX. 10 TONS

NUMBER OF OPERATORS: 1

QUALITY STANDARD: CE

WARRANTY: 2 YEARS

FINAL ROLL PACKING TUBE DIAMETER: 250 TO 400 mm

 

YouTube Video 1: https://youtu.be/7e3-3FtaQdE

YouTube Video 2: https://youtu.be/LrmcQ18A1zM

QUANTITY: 1

Learn More