Search results for: 'Elec'

L-1184 SSM AIR COVERING DP3 C DIGICONE PRECIFLEX YEAR 2012

BRAND: SSM
MODEL: DP3 C DIGICONE PRECIFLEX
YEAR: 2012
MECHANICAL SPEED UP TO 1200 M/MIN
PACKAGE SHAPE PROGRAMMABLE (RIGHT NOW AT 290m)
JET HEBERLAIN
N. 40 POSITIONS
SUPERIOR CREEL FOR BOBBINS
INDIVIDUALLY CONTROLLED ELECTRONIC SINGLE DRIVES
INSTALLED POWER: 500 W FOR SPINDLE
AIR COVERING 6 BAR TO 10 BAR OF THE JET
ALL POSITONS RUNNING

QUANTITY: 1

C-1426 COMPLETE RIETER G33 RING SPINNING PLANT 29,000 SPINDLES, YEAR 1996

RING FRAMES,
FLYERS AND DRAW FRAMES
INSTALLED YEAR 2000
BLOWROOM AND CARDS INSTALLED YEAR 1996

-RIETER BLOWROOM

RIETER UNIFLOC A10, 2300MM, 36.8M
ARGEMA ELECTRONIC METAL DETECTOR
RIETER WASTE OPENER B2/5
RIETER UNICLEAN B10
2 RIETER UNIMIX B7/3
4 RIETER UNIFLEX B7/3

PNEUMATIC FIBRE CONVEYANCE, EXHAUST FANS,
DUST EXTRACTOR FANS,
TRANSPORT FANS, 2 TWO-WAY DISTRIBUTORS,
4 HIGH SPEED BY-PASS VALVES
ELECTRICAL CONTROL PANEL

-RIETER CARDS

12 RIETER C50 CARDS WITH CHUTE FEED AEROFEED A7/U
AUTOMATIC WASTE REMOVAL SYSTEM,
TRANSPORT FANS, BY-PASS VALVES.
RINSING VALVES AND LOCKING VALVES

-RIETER DRAW FRAMES

4 RIETER DRAW FRAMES TYPE SB-D10, 20” X 42” CANS
4 RIETER DRAW FRAMES TYPE RSB-D30, 20” X 42” CANS

-RIETER ROVING FRAMES

8 RIETER ROVING FRAMES , TYPE F10, 120 SPINDLES
LUWA TRAVELLING CLEANERS

-RIETER RING FRAMES

30 RIETER G33 RING FRAMES, 960 SPINDLES
10 FRAMES RINGS 42MM DIA, 70MM GAUGE, LIFT 220MM

20 FRAMES RINGS 45MM DIA, 70MM GAUGE, LIFT 230MM
LUWA TRAVELLING CLEANERS

-CONE WINDING

8 MURATA CONE WINDERS, 60 HEADS EACH
(4 X TYPE 7-2 FROM 1985 AND 4 X 7-V FROM 1996)

-LABORATORY

USTER TESTER 4
USTER TENSORAPID UTR-3

-ACCESSORIES

OTIMA VACUUM STEAMER
COMPRESSORS,

PLANT IS RUNNING NOW
INSPECTION WELCOME ANY TIME

QUANTITY: 1

M-6247 OSTHOFF SP-80 SINGEING MACHINE YEAR 1980

SINGEING MACHINE
MAKE: OSTHOFF
MODEL: SP 80
YEAR: 1980
WORKING WIDTH: 1800mm TO 2000mm
(BURNER WIDTH 2400mm, ROLLER WIDTH INSIDE SINGEING BOX 2300mm)
ROLLER AND CYLINDER WIDTH AFTER SINGEING BOX 2100mm
FABRIC ENTRY WITH GUIDE ROLLERS AND TENSIONING DEVICE
OSTHOFF SINGEING MACHINE WITH 2 x DOUBLE JET BURNERS FOR FACE AND BACK SINGEING
DUST SUCTION FAN WITH EXHAUST
DESIZING TANK WITH 4 BOTTOM AND 4 TOP SS ROLLERS
1 x SS PREPARATION VESSEL
EXIT WITH PLAITER
3 TROLLEYS FOR THE FABRIC INCLUDED IN LINE
380V, 50HZ
UPGRADED ELECTRIC CONTROL BOX AND PB GAS DELIVERY UNITS

CONDITION: GOOD

QUANTITY: 1

C-2916 OSTHOFF SINGEING MACHINE U97/3, WIDTH 2,000mm, YEAR 2005

MAKER: OSTHOFF, GERMANY
YEAR: 2005
TYPE: U97/3
WORKING WIDTH: 2,000mm
COMPLETE SET WITH STANDARD ACCESSORIES
ENTRY WITH TENSIONING
ACCUMULATOR
OSTHOFF SINGEING UNIT
2 RAMPS
FUMES EXTRACTION
1 QUENCHING TANK
8 MT CONTENT
4 COOLING DRUMS
HIGH EFFICIENCY
SQUEEZING PADDER
ACCUMULATOR
EXIT WITH BATCHER CONTROL PANEL.
ELECTRIC PANELS

QUANTITY: 1

K-6715 ESCHER WYSS BACK PRESSURE STEAM TURBINE YEAR 1964

MANUFACTURER: ESCHER WYSS
TYPE: 135-200
POWER ELECTRICAL: 3.0 MW
PRESSURE/TEMP.: 60 BAR/400°C
BACK PRESSURE: 11 BAR
YEAR OF MANUFACTURER: 1964
CONDITION: GOOD
VOLTAGE: 11 KV/50 HZ
SCOPE OF SUPPLY:
TURBINE AND GENERATOR,PIPING AND ELECTR. BOXES

QUANTITY: 1

K-2582 SIEMENS COAL AND BIOMASS POWER PLANT 2.5MW YEAR 2002

WAS BUILT TO SUPPLY THE PAPER MILL WITH STEAM AND ELECTRICITY

MAKE: SIEMENS
MODEL: CFR5 G6a
2.5MW
65 BAR
480 ˚ C
REVOLUTION NUMBER: 23000 U PER MINUTE
EVAPORATION PRESSURE: 1-10 BAR
YEAR 2002
THE STEAM TUBINE AND THE GENERATOR WERE CHANGES AND ARE NEW
HOURS: LESS THAN 30,000
BOILER SYSTEM WAS COMPLETELY RECONDITIONED
THE WATER TREATMENT PLANT WAS RECONDITIONED
EXHAUST CLEANING SYSTEM WAS RECONDITIONED
ASH AND COAL TRANSPORTATION SYSTEMS WERE RECONDITIONED

QUANTITY: 1

P-4825 COGNETEX/SANT’ ANDREA PREPARATION LINE & COGNETEX SAVIO SPINNING LINE

ITEM 001
COGNETEX
TYPE: SCE11VA
PREPARATION
ELECTRONIC AUTO AND AUTOMATIC REMOVAL
EXIT 1000 x 1200
QUANTITY: 1

ITEM 002
COGNETEX
TYPE: SC11VA
STIRATOIO
ELECTRONIC AUTO AND AUTOMATIC REMOVAL
EXIT 1000 x 1200
QUANTITY: 1

ITEM 003
COGNETEX
TYPE: SC420/22V
STIRATOIO
ELECTRONIC AUTO AND AUTOMATIC REMOVAL
EXIT 800 x 1200
QUANTITY: 1

ITEM 004
SANT’ ANDREA
TYPE: SH22 (ROTARY HEAD)
PREPARATION
EXIT 800 x 1200
QUANTITY: 1

ITEM 005
SANT’ ANDREA
TYPE: RF2B
FINISHER
24 BOBBINS
SPINDLE 330mm
AUTOMATIC DISCHARGE
QUANTITY: 1

ITEM 006
COGNETEV
SPINNING/WINDING MACHINE
WITH 630 SPINDLES (.55mm x 82.5mm)
AUTOMATIC DISCHARGE LINKED WITH SAVIO
TYPE: ESPERO
24 HEADS
WITH INSPECTOR CONTROL AND BLOWING MAGITEX
ALSO INCLUDED ELECTRONIC SENSOR
PEYER PS31
QUANTITY: 2

QUANTITY: 1 LINE

P-4879 KRANTZ STENTER YEAR 1989 WIDTH 2200mm 5 CHAMBERS

KRANTZ
STENTER
YEAR: 1989 (COMPLETELY REFURBISHED 2006)
WORKING WIDTH: 2200mm
ENTRY FROM TROLLEY OR A-FRAME
BIANCO INFEED UNIT, YEAR 2006

QUANTITY: 1

P-4623 VAN DE WIELE MPS32 JACQUARD WEAVING LOOMS YEAR 1990 WIDTH 2100mm 8 COLORS JACQUARD

VAN DE WIELE
TYPE: MPS32
JACQUARD WEAVING LOOMS
YEAR: 1990
WORKING WIDTH: 2100mm
8 WEFT COLOR SELECTION
STAUBLI DOBBY

QUANTITY: 2

K-9319 CRABTREE GRIPPER AXMINSTER IVAX CARPET LOOMS YEAR 1998 TO 1999

IVAX LOOMS
CRABTREE GRIPPER AXMINSTER CARPET LOOMS
YEAR: 1998 TO 1999
THEY HAVE 11 COLOR COMPUTERIZED ELECTRONIC JACQUARDS

QUANTITY: 2