Search results for: 'Electric d''

P-2927 ROLANDO RC SILVER OPENER WIDTH 500mm YEAR 1998

ROLANDO
TYPE: RC
SILVER OPENER
YEAR: 1998
WORKING WIDTH: 500mm

QUANTITY: 1

Learn More

A-1519 THERMOBONDING (WADDING) FIBERFILL LINE FOR SALE. This line is one year old

(6) 200 x 60 INCH WISE LAPPERS
(6) 850 PROCTOR GARNETTS WITH DOUBLE DOFFERS, MAINS, STRIPPERS, ETC.
(7) 36 INCH WISE CONDENSER
(1) 200 INCH SINGLE-PASS OVEN WITH COOL-DOWN AND ALL FANS-24 feet long (one year old)

250 FT. FLOOR APRON CHAIN, NEW IN BOX

QUANTITY: 1

Learn More

REFERENCE NUMBER: C-3807 RAMISCH KLEINWEFER CALENDER FOR WOVEN FABRICS RKK-3100, WORKING WIDTH 2800mm, YEAR 1996 DETAILS: RAMISCH KLEINWEFER CALENDER FOR WOVEN FABRICS WORKING WIDTH: 2800mm YEAR: 1996 TYPE: RKK-3100 ROLLER WIDTH: 3000mm THREE BOWLS (1 X RECALON, 1 X STEEL, 1 X COTTON) ELECTRIC HEATED HYDRAULIC PRESSURE METAL AND SEAM DETECTORS EXIT WITH PLAITER OR BIG BATCHER 380V 50HZ QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: P-2505 KARL MAYER ROTAL SIZING MACHINE YEAR 2001 WIDTH 4000mm KARL MAYER-ROTAL SIZING MACHINE YEAR: 2001 HEAD 4600mm QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: M-3334 (880AESDXX7) K RIETER BT 905 OPEN END SPINNING MACHINE YEAR 1999-2000 RIETER BT 905 OPEN END SPINNING MACHINE YEAR: 1999, 2000 NO. OF POINTS - 288 CYLINDRICAL BEAM - 170 mm WEIGHT OF BEAM - MAX - 3 KG DIAMETER - 43 OR 50 mm TYPE OF COMB - OK 61 NIDI ROTATION OF COMB - 7000-9000 RPM PRODUCED YARN: VIS, VIS/PES, TEX 20 - 80 ROTATION OF SPIN 45-90 000 RPM ELECTRICAL QUALITY CONTROL AVAILABLE WAXING (PARAFFINING) UNIT (1 MACHINE) SUPPLY - 3 X 380 V, 50 HZ, 195 A, 10 BAR QUANTITY AVAILABLE: 2 Learn More

REFERENCE NUMBER: M-5393 (2206YBJL1UM) L TUFTCO COATING LINE WITH FOAM MACHINE AND SLITTING OPERATION TUFTO COATING LINE FOR EMBOSSED UNITARY BACKED RUGS USING WASHABLE LATEX FOR EMBOSSED WASHABLE RUGS – SET UP FOR 12’ WIDTH AND INCLUDES THE FOLLOWING: TISI MODEL 38500 BUTT SEAMER WITH TRIMMER ON RAIL ENTRANCE J-BOX VERTICAL KEYON PIN TENTER DIRECT COAT APPLICATOR, ROLL OVER ROLL WITH TRAVERSING SYSTEM DAY TANK TO FEED LATEX TO FROTH MACHINE EASE TYPE FROTH MACHINE PRE-STEAMER BANK OF ELECTRIC INFRAREDS TWO BASKET-WEAVE EMBOSSING ROLLERS FOR 12’ WIDTHS FOUR MODULE NATURAL GAS HEATED TUFTCO CURING OVEN COOL OUT SECTION SLITTING SECTION WITH EIGHT SLITTING HEADS AND A CAMERA GUIDING SYSTEM 10 LOOP ACCUMULATOR ROLLUP ELECTRICAL CONTROL SYSTEM BY TUFTCO SPEED RANGE: LINE SPEED FOR COATING 50 OUNCE/SQUARE YARD FACE WEIGHT WITH 24 OZ/SQUARE YARD OF EMBOSSIBLE LATEX IS 35FPM, LINE SPEED FOR COATING 30 OZ/SQUARE YARD FACE WEIGHT WITH 20 OZ/SQUARE YARD OF EMBOSSIBLE LATEX IS 45 FPM. TOILET SEAT CONVERS ARE COATED WITH APPROXIMATELY 7 OZ/SQUARE YARD AT 70 FPM. NOTE THE MAXIMUM MECHANICAL SPEED OF THE COATING LINE IS 70 FPM. QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: P-1257 HUSKY GL300 P100/110 E120 PET PREFORM INJECTION MOULDING MACHINE YEAR 2004 5000 WORKING HOURS HUSKY GL300 P100/110 PET PREFORM INJECTION MOULDING MACHINE YEAR: 2004 ELECTRICITY POWER SUUPPLY: 380 VOLTZ per 60 HERTZ HUSKY 48-CAVITY PREFORM MOULD FOR ALCOA 1716-33 GRAMS PREFORMS SANHSIN 48-CAVITY COLD HALF FOR PCO 1810-29.5 GRAMS PREFORMS PIOVAN LD10 COLOR MIXER PIOVAN DS 528 RESIN DRYER PIOVAN RESIN HOPPER T4000LX PIOVAN RPA 1200 MOULD DEHUMIDIFIER WORKING HOURS: 5000 HOURS QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: P-1256 HUSKY GL300 P100/110 E100 PET PREFORM INJECTION MOULDING MACHINE YEAR 2000 2000 WORKING HOURS HUSKY GL300 P100/110 E100 PET PREFORM INJECTION MOULDING MACHINE YEAR: 2000 ELECTRICITY POWER SUPPLY: 180 VOLTS per 60 HERTZ HUSKY 48-CAVITY PREFORMS MOULD FOR ALCOA 1716-36GM PREFORMS GDXL 48-CAVITY PREFORMS MOULD (COLD HALF) FOR PCO 1810 23.5 GRAMS PREFORMS COLOR MATRIX COLOR MIXER PIOVAN DS 428 RESIN DRYER PIOVAN RESIN HOPPER T4000LX PIOVAN RPA 1500 MOULD DEHUMIDIFIER WORKING HOURS: 2000 HOURS QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: M-3781 (99056WOWZ8RC) K BENNINGER DIMENSA MERCERIZING MACHINE YEAR 2005 WORKING WIDTH 1800mm TYPE BENNINGER DIMENSA MSG LG ZT YOC. 2005 (INSTALLED END OF 2005) MAX FABRIC WIDTH 1.8 MT QUANTITY AVAILABLE: 1 Learn More

REFERENCE NUMBER: M-4038

BENNINGER ZELL MERCERIZER YEAR 2007 WIDTH 1800mm

 

BRAND: BENNINGER ZELL

MODEL YEAR: 2007

ROLLER WIDTH: 2000mm

WORKING WIDTH: 1800mm

TOTAL FABRIC QUANTITY: 160 METERS

SEARCH FOR PRE-WETTING AND IS LOCATED AT THE ENTRANCE TIGHTENING.

MERCERIZED PART: TWO-CHAN, ARE TIGHTENING INTERMEDIATE OUTPUT.

BENNINGER HAS BOMA CONTROL SYSTEM

STABILIZE KISMI : A CHAN , OUTPUT ARE TIGHTENING SEARCH

ELUTING FRACTION CAN OPERATE INDEPENDENTLY

THE MACHINE ONLY FOR THE PURPOSE OF DESTROYING THE AVAILABLE

ELECTRICAL PANEL HAS BEEN DESIGNED ACCORDINGLY BY BENNINGER

WASHING BOATS: FOUR PIECE, BENNINGER WASHING TECHNIQUES APPROPRIATE TO EACH, DOUBLE FABRIC PASS, SEARCH TOP SQUEEZE, INDIRECTLY HEATED, DIRECT WATER SUPPLY AND CHEMICALS SHOULD BE FED TWO BOAT.

EVERY BOAT OUT THERE IN THE FABRIC OPENING AND INTERMEDIATE CLAMPING UNITS HAVE.

THE LAST BOAT IS IN ITSELF CONSISTS OF TWO PARTS, THE BATHROOMS DO NOT MIX.

THE NEUTRALIZATION CAN BE PERFORMED IN THE LAST COMPARTMENT.

THERE ARE AUTOMATIC ACID DOSAGE UNIT.

THERE ARE 7.5 KN CLAMPING CYLINDER IN THE OUTPUT SECTION.

SEARCH SQUEEZED FABRIC FROM THE FABRIC CENTERING.

THROUGH THE WINDER UNIT IS WRAPPED IN THE DOCK

Learn More